Hi, for me the firmware http://downloads.openwrt.org/releases/18.06.0/targets/ar71xx/tiny/openwrt-18.06.0-ar71xx-tiny-tl-wr940n-v6-squashfs-factory.bin does not fit, constantly error 18005.
Make firmware for "RU" region.
A link to my original firmware. "https://static.tp-link.com/TL-WR940N(RU)_V6_170704.zip"
Thank you
Tftp will work
I have a router RU, can I flash this US? https://downloads.openwrt.org/releases/18.06.0/targets/ar71xx/tiny/openwrt-18.06.0-ar71xx-tiny-tl-wr940n-v6-squashfs-factory-us.bin
How to flash on Tftp?
I provided that information to you already in the thread "[FAQ] Error code 4503 + 18005":
what firmware is right for Tftp? http://downloads.openwrt.org/releases/18.06.0/targets/ar71xx/tiny/openwrt-18.06.0-ar71xx-tiny-tl-wr940n-v6-squashfs-factory.bin will suit?
You flash the firmware for your model, the WR940N v6:
openwrt-18.06.0-ar71xx-tiny-tl-wr940n-v6-squashfs-factory
and
openwrt-18.06.0-ar71xx-tiny-tl-wr940n-v6-squashfs-factory-XX
But this is the same firmware for the web interface! can?
As noted in the other thread:
What are the differences?
squashfs-factory.bin
squashfs-factory-us.bin
squashfs-factory-eu.bin
need a powerful wifi!
Π Π°Π·Π½ΠΈΡΠ° ΠΎΡΠ½ΠΎΠ²Π°Π½Π° Π½Π° ΡΠ΅Π³ΠΈΠΎΠ½Π°Π»ΡΠ½ΠΎΠΌ ΠΊΠΎΠ΄Π΅. ΠΠΎ ΡΠΌΠΎΠ»ΡΠ°Π½ΠΈΡ OpenWrt Π΄Π΅Π»Π°Π΅Ρ ΠΏΡΠΎΡΠΈΠ²ΠΊΡ Π΄Π»Ρ ΠΠ‘ ΠΈ Π‘Π¨Π.
ΠΠ½ΠΈ Π΄ΠΎΠ»ΠΆΠ½Ρ ΠΎΠ±Π»Π°Π΄Π°ΡΡ ΠΎΠ΄ΠΈΠ½Π°ΠΊΠΎΠ²ΡΠΌΠΈ Π²ΠΎΠ·ΠΌΠΎΠΆΠ½ΠΎΡΡΡΠΌΠΈ Π±Π΅ΡΠΏΡΠΎΠ²ΠΎΠ΄Π½ΠΎΠΉ ΡΠ²ΡΠ·ΠΈ.
ΠΡΠΎΡ ΡΠ΅Π³ΠΈΠΎΠ½Π°Π»ΡΠ½ΡΠΉ ΠΊΠΎΠ΄ Π²Π°ΠΆΠ΅Π½ ΡΠΎΠ»ΡΠΊΠΎ ΠΏΡΠΈ ΠΏΡΠΎΡΠΈΠ²ΠΊΠ΅ ΠΈΠ· ΠΎΡΠΈΠ³ΠΈΠ½Π°Π»ΡΠ½ΠΎΠΉ ΠΏΡΠΎΡΠΈΠ²ΠΊΠΈ? ΠΡΠ»ΠΈ Ρ Π±ΡΠ΄Ρ ΡΠΈΡΡ ΡΠ΅ΡΠ΅Π· TFTP, Π΄Π»Ρ ΠΌΠ΅Π½Ρ Π² ΡΠ°ΠΊΠΎΠΌ ΡΠ»ΡΡΠ°Π΅ ΠΎΠ½ΠΈ Π±ΡΠ΄ΡΡ ΠΏΠΎΠ»Π½ΠΎΡΡΡΡ ΠΎΠ΄ΠΈΠ½Π°ΠΊΠΎΠ²ΡΠΌΠΈ? Π― ΠΏΡΠ°Π²ΠΈΠ»ΡΠ½ΠΎ ΠΏΠΎΠ½ΠΈΠΌΠ°Ρ, ΡΡΠΎ ΠΏΡΠΈΡΡΠ°Π²ΠΊΠΈ ΡΠ΅Π³ΠΈΠΎΠ½ΠΎΠ² Π² ΠΊΠΎΠ½ΡΠ΅ Π½ΡΠΆΠ½Ρ ΡΠΎΠ»ΡΠΊΠΎ Π΄Π»Ρ ΡΠΎΠ³ΠΎ, ΡΡΠΎΠ±Ρ ΠΈΡ ΠΏΡΠΈΠ½ΡΠ» ΡΠΎΠ΄Π½ΠΎΠΉ ΠΈΠ½ΡΠ΅ΡΡΠ΅ΠΉΡ tplink?
This regional code is important only with the firmware from the original firmware? If I will be sewing through TFTP, for me in this case they will be completely identical? I correctly understand that the prefixes of the regions at the end are needed only to be accepted by the native interface tplink?
ΠΠ°ΠΊ ΠΎΡΠΌΠ΅ΡΠ΅Π½ΠΎ Π² Π΄ΡΡΠ³ΠΎΠΌ ΠΏΠΎΡΠΎΠΊΠ΅, TFTP Π½Π΅ ΠΏΡΠΎΠ²Π΅ΡΡΠ΅Ρ ΠΊΠΎΠ΄Ρ ΡΠ΅Π³ΠΈΠΎΠ½ΠΎΠ²
As was noted on the other thread, TFTP does not check for region codes:
ΠΠ° ΠΊΠ°ΠΊΠΎΠΉ ΠΈΠ· ΡΡΠΈΡ
ΠΏΡΠΎΡΠΈΠ²ΠΎΠΊ ΠΌΠΎΠΆΠ½ΠΎ ΡΡΠ°Π²ΠΈΡΡ ΠΌΠΎΡΠ½ΠΎΡΡΡ Π²ΡΡΠ΅ 100mW? ΠΠ»ΠΈ 100mW ΠΏΡΠ΅Π΄Π΅Π»?
squashfs-factory.bin
squashfs-factory-us.bin
squashfs-factory-eu.bin
On which of these firmwares can you put power above 100mW? Or 100mW limit?
You cannot increase nor change the power limit legally.
ΠΡ Π½Π΅ ΠΌΠΎΠΆΠ΅ΡΠ΅ ΡΠ²Π΅Π»ΠΈΡΠΈΡΡ ΠΈΠ»ΠΈ ΠΈΠ·ΠΌΠ΅Π½ΠΈΡΡ ΠΎΠ³ΡΠ°Π½ΠΈΡΠ΅Π½ΠΈΠ΅ ΠΌΠΎΡΠ½ΠΎΡΡΠΈ Π½Π° Π·Π°ΠΊΠΎΠ½Π½ΡΡ
ΠΎΡΠ½ΠΎΠ²Π°Π½ΠΈΡΡ
.
http://downloads.openwrt.org/releases/18.06.0/targets/ar71xx/tiny/openwrt-18.06.0-ar71xx-tiny-tl-wr940n-v6-squashfs-factory.bin
without a boot?
I think the "factory" file without a country code in the name is coded for China, CN.
The only difference among those 3 files is the header being setup so the factory firmware from CN, US, or EU respectively will accept it. Since you have a RU version, none of these will load from the web interface-- but any should work over TFTP.
Once flashed, they will all work exactly the same. The header is not kept after downloading. The resulting image in the flash, including the wifi driver and reg limits will be the same for all 3.
Do openwrt firmwares come with a boot or not?
No, there is not a bootloader in the OpenWrt image. It is designed to work with the factory bootloader. You should not need to change your bootloader.