Were you using DFS channels (52-144)? If so, I believe that DFS channels are not officially implemented in this router yet (the last time I read about this the mt76 driver did not have the capability to listen to radar signals with mt7613, so I believe that this might be the cause, but I am not certain about this).
It may be possible to use DFS channels if you select a country where these channels are not restricted. Notice that doing so if you are not in the selected country may be against the law.
That's good news! I flashed your "unofficial" build and it's working really good! But now I want to install WireGuard. Will the official build let me install packages? If so, can I upgrade by flashing the image or is it a more complicated process? Thanks for your hard work
Hi!
I flashed the 22.03.0-rc1 on C6 3.2 US but for some reason, I constantly get issue where a website will keep loading. This problem is occurring every 10-15 mins.
I know my internet connection is okay because if directly connect my laptop without the router, the problem seems to disappear.
I just installed 22.03.0-rc1 to a C6 V3.2 (EU) 'UK' version.
One observation is INSSIDer for Windows is 'claiming' the 5 GHz signal from the C6 is significantly stronger than any other router I've previously tested. eg. -41dB instead of the usual -50dB with all other routers in same 'test' position about 7m away from laptop.
So from observing the logs, I find this error when some website is not loading properly. Any ideas to why?
Sun May 22 13:02:17 2022 daemon.warn dnsmasq[1]: failed to create listening socket for fe80::f3:3616%pppoe-wan: Address not available
Sun May 22 13:02:17 2022 daemon.warn dnsmasq[1]: failed to create listening socket for fe80::f3:3616%pppoe-wan: Address not available
Sun May 22 13:08:44 2022 daemon.warn dnsmasq[1]: failed to create listening socket for fe80::f3:3616%pppoe-wan: Address not available
Sun May 22 13:08:44 2022 daemon.warn dnsmasq[1]: failed to create listening socket for fe80::f3:3616%pppoe-wan: Address not available
Sun May 22 13:08:44 2022 daemon.warn dnsmasq[1]: failed to create listening socket for fe80::f3:3616%pppoe-wan: Address not available
Sun May 22 13:08:44 2022 daemon.warn dnsmasq[1]: failed to create listening socket for fe80::f3:3616%pppoe-wan: Address not available
My phone still disconnects, disassociates and then "deauthenticates due to inactivity" (5 Ghz). While I have noticed that I also disconnect from my other router, that happens a lot more rarely and I stay connected much longer, to the point where I didn't even notice before. With this router and OpenWRT I disconnect after a few minutes.
What is this "timer DEAUTH/REMOVE" anyway that I get in the log for automatic deauthentication? Can this timer be set anywhere?
I found a problem, it seems that the upload does not exceed 50mb while in the factory firmware I reached 90mb. I don't know if anyone else had this problem....
Everything is working fine on rc3...only issue found is 2.4 wifi signal strength is little bit low compared to stock firmware.5ghz has improved a lot,it is working as stable as stock firmware.when i tested rc1 5ghz has many issues but almost all of the issues in rc1 is solved in rc3.we can hope everything will be fixed when stable update is released.
