loosely speaking most people wouldn't want to as they both do similar things... (run a shaper on an interface typically wan) so may conflict with each other...
technically, if they each deal with different interfaces it should be possible... but I don't really know about qosify's internals much to say that with certainty...
One more issue I am facing on my mobile device is that links fail to load, I get this error.
dns probe finished nxdomain
but when I open same links on my PC, they just load fine. Something wrong with my DNS configurations?
Has anyone been able to route a 1Gbit PPPoE connection with this build and a RPi4?
Edit: Getting 400/500 on a 1000/500 connection with stock OpenWRT, and 650/500 with this build. What secret sauce is baked into this build to outperform stock OpenWRT?
Speeds are with a AX88179 adapter which by all accounts are a bit rubbish.
I found that to be the case too - but most USB Ethernet devices are not exactly ideal for gigabit
Not sure if this build includes irqbalance, but perhaps that's the secret sauce
Try a tp-link ue300. It’s been tested throughly & will deliver gigabit speeds
I've enabled irqbalance on the stock builds and it didn't make much difference. Enabling software flow offloading makes a difference but I lose the ability to use SQM.
I've got a DFRobot Router Carrier Board and CM4 on order so hoping that's a better combo. There are lots of posts indicating gigabit is possible with the RPi4 but its not clear if they're using PPPoE or DHCP.
This is a misconception. SQM doesn’t work with hardware offloading. It’s been found to work with software flow offloading but there’s zero benefit on the rpi4b from what I could tell. Make sure you enable irqbalance in /etc/config/irqbalance, set enable=1.
My DFRobot is due "any day" (already have the CM4) - however, for me there's not much point, as gigabit is not attainable for me currently
Thanks for the advice, that made all the difference. Rookie mistake! Don't appear to need software flow offloading to hit gigabit speeds, even with a AX88179 adapter.
If anyone has some advice for this one, would be highly appreciated:
@anon50098793 Does your build use hostapd by default?
or
opkg list-installed | grep NAMEthat said afair the main wifi change is to use wpad*openssl...
also from time to time, i've carried some wifi hacks...
the rpi-foundation don't make this stuff easy so it's all just guesswork depending on what random resource I run across from time to time...
Alright, though inside the logs it seems to be hostapd runnining.
at Nov 27 01:23:22 2021 daemon.notice netifd: Wireless device 'radio1' is now up
Sat Nov 27 01:23:29 2021 daemon.notice hostapd: ACS: Survey is missing channel time
Sat Nov 27 01:23:29 2021 daemon.notice hostapd: ACS: Survey is missing RX and busy time (at least one is required)
Sat Nov 27 01:23:29 2021 daemon.notice hostapd: ACS: Survey is missing channel time
Sat Nov 27 01:23:29 2021 daemon.notice hostapd: ACS: Survey is missing RX and busy time (at least one is required)
Sat Nov 27 01:23:29 2021 daemon.notice hostapd: ACS: Survey is missing channel time
Sat Nov 27 01:23:29 2021 daemon.notice hostapd: ACS: Survey is missing RX and busy time (at least one is required)
Sat Nov 27 01:23:29 2021 daemon.notice hostapd: ACS: Survey is missing channel time
Sat Nov 27 01:23:29 2021 daemon.notice hostapd: ACS: Survey is missing RX and busy time (at least one is required)
Sat Nov 27 01:23:29 2021 daemon.notice hostapd: ACS: Survey is missing channel time
Sat Nov 27 01:23:29 2021 daemon.notice hostapd: ACS: Survey is missing RX and busy time (at least one is required)
Sat Nov 27 01:23:29 2021 daemon.notice hostapd: ACS: Survey is missing channel time
Sat Nov 27 01:23:29 2021 daemon.notice hostapd: ACS: Survey is missing RX and busy time (at least one is required)
Sat Nov 27 01:23:29 2021 daemon.notice hostapd: ACS: Survey is missing channel time
Sat Nov 27 01:23:29 2021 daemon.notice hostapd: ACS: Survey is missing RX and busy time (at least one is required)
Sat Nov 27 01:23:29 2021 daemon.notice hostapd: ACS: Survey is missing channel time
Sat Nov 27 01:23:29 2021 daemon.notice hostapd: ACS: Survey is missing RX and busy time (at least one is required)
Sat Nov 27 01:23:29 2021 daemon.notice hostapd: ACS: Survey is missing channel time
Sat Nov 27 01:23:29 2021 daemon.notice hostapd: ACS: Survey is missing RX and busy time (at least one is required)
Sat Nov 27 01:23:29 2021 daemon.notice hostapd: ACS: Survey is missing channel time
Sat Nov 27 01:23:29 2021 daemon.notice hostapd: ACS: Survey is missing RX and busy time (at least one is required)
Sat Nov 27 01:23:29 2021 daemon.notice hostapd: ACS: Survey is missing channel time
Sat Nov 27 01:23:29 2021 daemon.notice hostapd: ACS: Survey is missing RX and busy time (at least one is required)
Sat Nov 27 01:23:29 2021 daemon.notice hostapd: ACS: Survey is missing channel time
Sat Nov 27 01:23:29 2021 daemon.notice hostapd: ACS: Survey is missing RX and busy time (at least one is required)
Sat Nov 27 01:23:29 2021 daemon.notice hostapd: ACS: Survey is missing channel time
Sat Nov 27 01:23:29 2021 daemon.notice hostapd: ACS: Survey is missing RX and busy time (at least one is required)
Sat Nov 27 01:23:29 2021 daemon.notice hostapd: ACS: Survey is missing channel time
Sat Nov 27 01:23:29 2021 daemon.notice hostapd: ACS: Survey is missing RX and busy time (at least one is required)
Sat Nov 27 01:23:29 2021 daemon.notice hostapd: ACS: Survey is missing channel time
Sat Nov 27 01:23:29 2021 daemon.notice hostapd: ACS: Survey is missing RX and busy time (at least one is required)
Sat Nov 27 01:23:29 2021 daemon.notice hostapd: ACS: Survey is missing channel time
Sat Nov 27 01:23:29 2021 daemon.notice hostapd: ACS: Survey is missing RX and busy time (at least one is required)
Sat Nov 27 01:23:29 2021 daemon.notice hostapd: ACS: Survey is missing channel time
Sat Nov 27 01:23:29 2021 daemon.notice hostapd: ACS: Survey is missing RX and busy time (at least one is required)
Sat Nov 27 01:23:29 2021 daemon.notice hostapd: ACS: Survey is missing channel time
Sat Nov 27 01:23:29 2021 daemon.notice hostapd: ACS: Survey is missing RX and busy time (at least one is required)
Sat Nov 27 01:23:29 2021 daemon.notice hostapd: ACS: Survey is missing channel time
Sat Nov 27 01:23:29 2021 daemon.notice hostapd: ACS: Survey is missing RX and busy time (at least one is required)
Sat Nov 27 01:23:29 2021 daemon.notice hostapd: ACS: Survey is missing channel time
Sat Nov 27 01:23:29 2021 daemon.notice hostapd: ACS: Survey is missing RX and busy time (at least one is required)
Sat Nov 27 01:23:29 2021 daemon.notice hostapd: ACS: Survey is missing channel time
Sat Nov 27 01:23:29 2021 daemon.notice hostapd: ACS: Survey is missing RX and busy time (at least one is required)
Sat Nov 27 01:23:29 2021 daemon.notice hostapd: ACS: Survey is missing channel time
Sat Nov 27 01:23:29 2021 daemon.notice hostapd: ACS: Survey is missing RX and busy time (at least one is required)
Sat Nov 27 01:23:29 2021 daemon.notice hostapd: ACS: Survey is missing channel time
Sat Nov 27 01:23:29 2021 daemon.notice hostapd: ACS: Survey is missing RX and busy time (at least one is required)
Sat Nov 27 01:23:29 2021 daemon.notice hostapd: wlan1: ACS-COMPLETED freq=2412 channel=1
Sat Nov 27 01:23:29 2021 daemon.err hostapd: Failed to initialize QoS Map
Sat Nov 27 01:23:29 2021 daemon.warn hostapd: wlan1: Could not connect to kernel driver
Sat Nov 27 01:23:29 2021 daemon.err hostapd: Interface initialization failed
Sat Nov 27 01:23:29 2021 daemon.notice hostapd: wlan1: interface state ACS->DISABLED
Sat Nov 27 01:23:29 2021 daemon.notice hostapd: wlan1: AP-DISABLED
Sat Nov 27 01:23:29 2021 daemon.err hostapd: ACS: Possibly channel configuration is invalid, please report this along with your config file.
Sat Nov 27 01:23:29 2021 daemon.err hostapd: ACS: Failed to start
Sat Nov 27 01:23:29 2021 daemon.notice hostapd: wlan1: AP-DISABLED
Sat Nov 27 01:23:29 2021 daemon.err hostapd: hostapd_free_hapd_data: Interface wlan1 wasn't started
Sat Nov 27 01:23:29 2021 daemon.notice hostapd: nl80211: deinit ifname=wlan1 disabled_11b_rates=0
Sat Nov 27 01:23:29 2021 kern.info kernel: [ 476.779528] device wlan1 left promiscuous mode
Sat Nov 27 01:23:29 2021 kern.info kernel: [ 476.785160] br-lan: port 2(wlan1) entered disabled state
Sat Nov 27 01:23:30 2021 daemon.notice hostapd: wlan1: interface state DISABLED->DISABLED
BTW: Do you have any idea how I could proceed to fix this wifi problem of mine? I quite ran out of ideas.
wpad = hostapd
post rpi-support.sh; uci show wireless; iw reg get
(remove psk/password and change wifi ssid name)
################################# root-dev: /dev/mmcblk0p2:07022009-02 boot-dev: /dev/mmcblk0p1
root@boot: PARTUUID=07022009-02
root@cmdline: PARTUUID=07022009-02
################################## 4B 1.4 2GB Sony_UK b03114
############ buildid:r18161-00ce13490a localversion:3.5.151-26 files:65316b783 variant:fullest
############ fwV:Feb162021 vlV:000138a1
############ fwWIFI: Firmware: BCM4345/6 wl0: Mar 23 2020 02:20:01 version 7.45.206 (r725000 CY) FWID 01-febaba43
raspberrypi-firmware: 2021-10-19T11:50:10, 0403e22018aafab833d0a16374ac773f66fd7be9
################################# wrt.ini brief
ENABLEDSERVICES="banip adblock dbus modemanager" #[fboot/upgrade] enable+start
LUCIQRCODES=1
WIFIAUTOSETUP=1
POWERPROFILE="quick"
RPI_EEPROM_CONFIG_HOOK_FILE_RECOMMENDED="/etc/custom/4-model-b/eeprom.config.recommended"
RPI4CMDLINEOPTS="fsckparts"
ROOTFSEXPAND=1
#################################
UPTIME: 11:46:0810:30, 0.10, 0.05, 0.00
DISKS: 4%:/ 0%:/tmp 35%:/boot 4%:/opt/docker 4%:/opt/docker/overlay2/6ddb4ae061c3bc72ee111574228ee2c4002da36a4858712385cc7a149561226e/merged
################################# hardware info
Revision : b03114
Serial : 10000000e12648b2
Model : Raspberry Pi 4 Model B Rev 1.4
################################# cmdline.txt
console=serial0,115200 console=tty1 root=PARTUUID=07022009-02 rootfstype=squashfs,ext4 rootwait pci=pcie_bus_perf fsckparts
################################# config.txt
dtparam=sd_poll_once
#################################
BOOTORDER:
### uptime: 11:46:08 up 10:30, load average: 0.10, 0.05, 0.00
### network CT:262 LP:47
### Mem: 542176K used, 1359464K free, 3268K shrd, 21528K buff, 219516K cached
### CPU: 0% usr 2% sys 0% nic 97% idle 0% io 0% irq 0% sirq
### Time Temp CPU Core Health Vcore PMIC
### 11:46:09 34.0'C 1500MHz 500MHz 00000000000000000000 0.8600V 37.3'C
SCALING:ondemand thresh:21 min:1100000 max:1500000 cur:1500000 TIME:1100000:3440358 1200000:437 1300000:566 1400000:595 1500000:338511
################################# opkg-repos
/etc/opkg/customfeeds.conf:src/gz git_core https://github.com/wulfy23/rpi4-opkg/raw/master/r18161-00ce13490a/core
/etc/opkg/customfeeds.conf:src/gz git_base https://github.com/wulfy23/rpi4-opkg/raw/master/r18161-00ce13490a/base
/etc/opkg/customfeeds.conf:src/gz git_luci https://github.com/wulfy23/rpi4-opkg/raw/master/r18161-00ce13490a/luci
/etc/opkg/distfeeds.conf:src/gz openwrt_kmods http://downloads.openwrt.org/snapshots/targets/bcm27xx/bcm2711/kmods/5.10.80-1-c607de81a52d4ba7e116a2343b96ea4f
/etc/opkg/distfeeds.conf:src/gz openwrt_packages http://downloads.openwrt.org/snapshots/packages/aarch64_cortex-a72/packages
/etc/opkg/distfeeds.conf:src/gz openwrt_routing http://downloads.openwrt.org/snapshots/packages/aarch64_cortex-a72/routing
/etc/opkg/distfeeds.conf:src/gz openwrt_telephony http://downloads.openwrt.org/snapshots/packages/aarch64_cortex-a72/telephony
########################################## GPIO
gpiochip0: GPIOs 0-57, parent: platform/fe200000.gpio, pinctrl-bcm2711:
gpio-0 (ID_SDA )
gpio-1 (ID_SCL )
gpio-2 (SDA1 )
gpio-3 (SCL1 )
gpio-4 (GPIO_GCLK )
gpio-5 (GPIO5 )
gpio-6 (GPIO6 )
gpio-7 (SPI_CE1_N )
gpio-8 (SPI_CE0_N )
gpio-9 (SPI_MISO )
gpio-10 (SPI_MOSI )
gpio-11 (SPI_SCLK )
gpio-12 (GPIO12 )
gpio-13 (GPIO13 )
gpio-14 (TXD1 )
gpio-15 (RXD1 )
gpio-16 (GPIO16 )
gpio-17 (GPIO17 )
gpio-18 (GPIO18 )
gpio-19 (GPIO19 )
gpio-20 (GPIO20 )
gpio-21 (GPIO21 )
gpio-22 (GPIO22 )
gpio-23 (GPIO23 )
gpio-24 (GPIO24 )
gpio-25 (GPIO25 )
gpio-26 (GPIO26 )
gpio-27 (GPIO27 )
gpio-28 (RGMII_MDIO )
gpio-29 (RGMIO_MDC )
gpio-30 (CTS0 )
gpio-31 (RTS0 )
gpio-32 (TXD0 )
gpio-33 (RXD0 )
gpio-34 (SD1_CLK )
gpio-35 (SD1_CMD )
gpio-36 (SD1_DATA0 )
gpio-37 (SD1_DATA1 )
gpio-38 (SD1_DATA2 )
gpio-39 (SD1_DATA3 )
gpio-40 (PWM0_MISO )
gpio-41 (PWM1_MOSI )
gpio-42 (STATUS_LED_G_CLK |led0 ) out lo
gpio-43 (SPIFLASH_CE_N )
gpio-44 (SDA0 )
gpio-45 (SCL0 )
gpio-46 (RGMII_RXCLK )
gpio-47 (RGMII_RXCTL )
gpio-48 (RGMII_RXD0 )
gpio-49 (RGMII_RXD1 )
gpio-50 (RGMII_RXD2 )
gpio-51 (RGMII_RXD3 )
gpio-52 (RGMII_TXCLK )
gpio-53 (RGMII_TXCTL )
gpio-54 (RGMII_TXD0 )
gpio-55 (RGMII_TXD1 )
gpio-56 (RGMII_TXD2 )
gpio-57 (RGMII_TXD3 )
gpiochip1: GPIOs 504-511, parent: platform/soc:firmware:gpio, raspberrypi-exp-gpio, can sleep:
gpio-504 (BT_ON )
gpio-505 (WL_ON )
gpio-506 (PWR_LED_OFF |led1 ) out hi ACTIVE LOW
gpio-507 (GLOBAL_RESET )
gpio-508 (VDD_SD_IO_SEL |vdd-sd-io ) out hi
gpio-509 (CAM_GPIO )
gpio-510 (SD_PWR_ON |sd_vcc_reg ) out hi
gpio-511 (SD_OC_N )
################################# interface-report
############### lo [ok] yes
############### eth0 err: rx_pause: 8199987 bcmgenet yes 1000Mb/s
############### eth1 [ok] r8152 yes 1000Mb/s
############### br-lan [ok] bridge yes 1000Mb/s
############### br-dcd626a67eeb [ok] bridge yes 10000Mb/s
############### vethfd3b4a4 [ok] veth yes 10000Mb/s
################################# packages-restore-actions
################################# packages-restored-RAWDIRECT
################################################ firstboot pkgpending 202111262000
################################### Added... 49
btrfs-progs
containerd
docker
docker-compose
dockerd
findutils-find
findutils-locate
kmod-br-netfilter
kmod-dax
kmod-dm
kmod-fs-btrfs
kmod-keys-encrypted
kmod-keys-trusted
kmod-lib-lzo
kmod-lib-raid6
kmod-lib-xor
kmod-lib-zlib-deflate
kmod-lib-zstd
kmod-mt76-core
kmod-mt76-usb
kmod-mt76x02-common
kmod-mt76x02-usb
kmod-mt76x2-common
kmod-mt76x2u
kmod-nf-ipvs
kmod-random-core
kmod-tpm
libdevmapper
libnetwork
libseccomp
libyaml
luci-lib-docker
python3-attrs
python3-bcrypt
python3-cached-property
python3-cryptography
python3-distro
python3-docker
python3-dockerpty
python3-docopt
python3-dotenv
python3-jsonschema
python3-paramiko
python3-pyrsistent
python3-texttable
python3-websocket-client
python3-yaml
runc
tini
################################### Removed... 0
################################################ firstboot pkgpending 202111262000
################################### Added... 49
btrfs-progs
containerd
docker
docker-compose
dockerd
findutils-find
findutils-locate
kmod-br-netfilter
kmod-dax
kmod-dm
kmod-fs-btrfs
kmod-keys-encrypted
kmod-keys-trusted
kmod-lib-lzo
kmod-lib-raid6
kmod-lib-xor
kmod-lib-zlib-deflate
kmod-lib-zstd
kmod-mt76-core
kmod-mt76-usb
kmod-mt76x02-common
kmod-mt76x02-usb
kmod-mt76x2-common
kmod-mt76x2u
kmod-nf-ipvs
kmod-random-core
kmod-tpm
libdevmapper
libnetwork
libseccomp
libyaml
luci-lib-docker
python3-attrs
python3-bcrypt
python3-cached-property
python3-cryptography
python3-distro
python3-docker
python3-dockerpty
python3-docopt
python3-dotenv
python3-jsonschema
python3-paramiko
python3-pyrsistent
python3-texttable
python3-websocket-client
python3-yaml
runc
tini
################################### Removed... 0
################################# autorestore-running-RAWDIRECT
#opkg install --force-checksum btrfs-progs #[ok-firstboot]#opK-R
#opkg install --force-checksum containerd #[ok-firstboot]#opK-R
#opkg install --force-checksum docker #[ok-firstboot]#opK-R
#opkg install --force-checksum docker-compose #[ok-firstboot]#opK-R
#opkg install --force-checksum dockerd #[ok-firstboot]#opK-R
#opkg install --force-checksum findutils-find #[ok-firstboot]#opK-R
#opkg install --force-checksum findutils-locate #[ok-firstboot]#opK-R
#opkg install --force-checksum kmod-br-netfilter #[ok-instonsys-firstboot]#opK-R
#opkg install --force-checksum kmod-dax #[ok-instonsys-firstboot]#opK-R
#opkg install --force-checksum kmod-dm #[ok-instonsys-firstboot]#opK-R
#opkg install --force-checksum kmod-fs-btrfs #[ok-instonsys-firstboot]#opK-R
#opkg install --force-checksum kmod-keys-encrypted #[ok-instonsys-firstboot]#opK-R
#opkg install --force-checksum kmod-keys-trusted #[ok-instonsys-firstboot]#opK-R
#opkg install --force-checksum kmod-lib-lzo #[ok-instonsys-firstboot]#opK-R
#opkg install --force-checksum kmod-lib-raid6 #[ok-instonsys-firstboot]#opK-R
#opkg install --force-checksum kmod-lib-xor #[ok-instonsys-firstboot]#opK-R
#opkg install --force-checksum kmod-lib-zlib-deflate #[ok-instonsys-firstboot]#opK-R
#opkg install --force-checksum kmod-lib-zstd #[ok-instonsys-firstboot]#opK-R
#opkg install --force-checksum kmod-mt76-core #[ok-firstboot]#opK-R
#opkg install --force-checksum kmod-mt76-usb #[ok-firstboot]#opK-R
#opkg install --force-checksum kmod-mt76x02-common #[ok-firstboot]#opK-R
#opkg install --force-checksum kmod-mt76x02-usb #[ok-firstboot]#opK-R
#opkg install --force-checksum kmod-mt76x2-common #[ok-firstboot]#opK-R
#opkg install --force-checksum kmod-mt76x2u #[ok-firstboot]#opK-R
#opkg install --force-checksum kmod-nf-ipvs #[ok-instonsys-firstboot]#opK-R
#opkg install --force-checksum kmod-random-core #[ok-instonsys-firstboot]#opK-R
#opkg install --force-checksum kmod-tpm #[ok-instonsys-firstboot]#opK-R
#opkg install --force-checksum libdevmapper #[ok-instonsys-firstboot]#opK-R
#opkg install --force-checksum libnetwork #[ok-instonsys-firstboot]#opK-R
#opkg install --force-checksum libseccomp #[ok-instonsys-firstboot]#opK-R
opkg install --force-checksum libwebsockets-full #[fail-firstboot]#[fail-firstboot]#opK-R
#opkg install --force-checksum libyaml #[ok-firstboot]#opK-R
opkg install --force-checksum luci-app-argon-config #[unknown-firstboot]#[unknown-firstboot]#opK-R
opkg install --force-checksum luci-app-dockerman #[fail-firstboot]#[fail-firstboot]#opK-R
#opkg install --force-checksum luci-lib-docker #[ok-instonsys-firstboot]#opK-R
#opkg install --force-checksum python3-attrs #[ok-firstboot]#opK-R
#opkg install --force-checksum python3-bcrypt #[ok-firstboot]#opK-R
#opkg install --force-checksum python3-cached-property #[ok-firstboot]#opK-R
#opkg install --force-checksum python3-cryptography #[ok-firstboot]#opK-R
#opkg install --force-checksum python3-distro #[ok-firstboot]#opK-R
#opkg install --force-checksum python3-docker #[ok-firstboot]#opK-R
#opkg install --force-checksum python3-dockerpty #[ok-firstboot]#opK-R
#opkg install --force-checksum python3-docopt #[ok-firstboot]#opK-R
#opkg install --force-checksum python3-dotenv #[ok-firstboot]#opK-R
#opkg install --force-checksum python3-jsonschema #[ok-firstboot]#opK-R
#opkg install --force-checksum python3-paramiko #[ok-instonsys-firstboot]#opK-R
#opkg install --force-checksum python3-pyrsistent #[ok-instonsys-firstboot]#opK-R
#opkg install --force-checksum python3-texttable #[ok-firstboot]#opK-R
#opkg install --force-checksum python3-websocket-client #[ok-instonsys-firstboot]#opK-R
#opkg install --force-checksum python3-yaml #[ok-firstboot]#opK-R
#opkg install --force-checksum runc #[ok-instonsys-firstboot]#opK-R
#opkg install --force-checksum tini #[ok-instonsys-firstboot]#opK-R
opkg install --force-checksum ttyd #[fail-firstboot]#[fail-firstboot]#opK-R
wireless.radio0=wifi-device
wireless.radio0.type='mac80211'
wireless.radio0.path='scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.1/1-1.1:1.0'
wireless.radio0.cell_density='0'
wireless.radio0.channel='auto'
wireless.radio0.band='5g'
wireless.radio0.htmode='VHT80'
wireless.radio0.log_level='1'
wireless.radio0.disabled='1'
wireless.default_radio0=wifi-iface
wireless.default_radio0.device='radio0'
wireless.default_radio0.network='lan'
wireless.default_radio0.mode='ap'
wireless.default_radio0.ssid='wifi0'
wireless.default_radio0.encryption='psk2'
wireless.default_radio0.key='abcd12345'
wireless.default_radio0.disabled='1'
wireless.radio1=wifi-device
wireless.radio1.type='mac80211'
wireless.radio1.path='platform/soc/fe300000.mmcnr/mmc_host/mmc1/mmc1:0001/mmc1:0001:1'
wireless.radio1.band='2g'
wireless.radio1.cell_density='0'
wireless.radio1.country='DE'
wireless.radio1.log_level='1'
wireless.radio1.legacy_rates='1'
wireless.radio1.channel='auto'
wireless.default_radio1=wifi-iface
wireless.default_radio1.device='radio1'
wireless.default_radio1.network='lan'
wireless.default_radio1.mode='ap'
wireless.default_radio1.ssid='wifi1'
wireless.default_radio1.encryption='psk2'
wireless.default_radio1.key='dadadadada132131'
wireless.default_radio1.wmm='0'
global
country DE: DFS-ETSI
(2400 - 2483 @ 40), (N/A, 20), (N/A)
(5150 - 5250 @ 80), (N/A, 23), (N/A), NO-OUTDOOR, AUTO-BW
(5250 - 5350 @ 80), (N/A, 20), (0 ms), NO-OUTDOOR, DFS, AUTO-BW
(5470 - 5725 @ 160), (N/A, 26), (0 ms), DFS
(5725 - 5875 @ 80), (N/A, 13), (N/A)
(5945 - 6425 @ 160), (N/A, 23), (N/A), NO-OUTDOOR, AUTO-BW
(57000 - 66000 @ 2160), (N/A, 40), (N/A)
phy#1
country 99: DFS-UNSET
(2402 - 2482 @ 40), (6, 20), (N/A)
(2474 - 2494 @ 20), (6, 20), (N/A)
(5140 - 5360 @ 160), (6, 20), (N/A)
(5460 - 5860 @ 160), (6, 20), (N/A)
remove psk/password and change wifi ssid name
Did that earlier, during my tests I was going with open network as well, didn't help
EDIT: Did it again, got the same situation though, here is the log:
Sat Nov 27 11:56:26 2021 daemon.notice netifd: Wireless device 'radio1' is now down
Sat Nov 27 11:56:35 2021 daemon.notice netifd: radio1 (4671): command failed: No error information (-524)
Sat Nov 27 11:56:35 2021 daemon.notice netifd: radio1 (4671): command failed: I/O error (-5)
Sat Nov 27 11:56:36 2021 daemon.notice hostapd: Configuration file: /var/run/hostapd-phy1.conf (phy wlan1) --> new PHY
Sat Nov 27 11:56:36 2021 kern.info kernel: [38464.045049] br-lan: port 3(wlan1) entered blocking state
Sat Nov 27 11:56:36 2021 kern.info kernel: [38464.051244] br-lan: port 3(wlan1) entered disabled state
Sat Nov 27 11:56:36 2021 kern.info kernel: [38464.057545] device wlan1 entered promiscuous mode
Sat Nov 27 11:56:36 2021 daemon.notice hostapd: wlan1: interface state UNINITIALIZED->COUNTRY_UPDATE
Sat Nov 27 11:56:36 2021 daemon.notice hostapd: ACS: Automatic channel selection started, this may take a bit
Sat Nov 27 11:56:36 2021 daemon.notice hostapd: wlan1: interface state COUNTRY_UPDATE->ACS
Sat Nov 27 11:56:36 2021 daemon.notice hostapd: wlan1: ACS-STARTED
Sat Nov 27 11:56:37 2021 daemon.notice netifd: Wireless device 'radio1' is now up
Sat Nov 27 11:56:44 2021 daemon.notice hostapd: ACS: Survey is missing channel time
Sat Nov 27 11:56:44 2021 daemon.notice hostapd: ACS: Survey is missing RX and busy time (at least one is required)
Sat Nov 27 11:56:44 2021 daemon.notice hostapd: ACS: Survey is missing channel time
Sat Nov 27 11:56:44 2021 daemon.notice hostapd: ACS: Survey is missing RX and busy time (at least one is required)
Sat Nov 27 11:56:44 2021 daemon.notice hostapd: ACS: Survey is missing channel time
Sat Nov 27 11:56:44 2021 daemon.notice hostapd: ACS: Survey is missing RX and busy time (at least one is required)
Sat Nov 27 11:56:44 2021 daemon.notice hostapd: ACS: Survey is missing channel time
Sat Nov 27 11:56:44 2021 daemon.notice hostapd: ACS: Survey is missing RX and busy time (at least one is required)
Sat Nov 27 11:56:44 2021 daemon.notice hostapd: ACS: Survey is missing channel time
Sat Nov 27 11:56:44 2021 daemon.notice hostapd: ACS: Survey is missing RX and busy time (at least one is required)
Sat Nov 27 11:56:44 2021 daemon.notice hostapd: ACS: Survey is missing channel time
Sat Nov 27 11:56:44 2021 daemon.notice hostapd: ACS: Survey is missing RX and busy time (at least one is required)
Sat Nov 27 11:56:44 2021 daemon.notice hostapd: ACS: Survey is missing channel time
Sat Nov 27 11:56:44 2021 daemon.notice hostapd: ACS: Survey is missing RX and busy time (at least one is required)
Sat Nov 27 11:56:44 2021 daemon.notice hostapd: ACS: Survey is missing channel time
Sat Nov 27 11:56:44 2021 daemon.notice hostapd: ACS: Survey is missing RX and busy time (at least one is required)
Sat Nov 27 11:56:44 2021 daemon.notice hostapd: ACS: Survey is missing channel time
Sat Nov 27 11:56:44 2021 daemon.notice hostapd: ACS: Survey is missing RX and busy time (at least one is required)
Sat Nov 27 11:56:44 2021 daemon.notice hostapd: ACS: Survey is missing channel time
Sat Nov 27 11:56:44 2021 daemon.notice hostapd: ACS: Survey is missing RX and busy time (at least one is required)
Sat Nov 27 11:56:44 2021 daemon.notice hostapd: ACS: Survey is missing channel time
Sat Nov 27 11:56:44 2021 daemon.notice hostapd: ACS: Survey is missing RX and busy time (at least one is required)
Sat Nov 27 11:56:44 2021 daemon.notice hostapd: ACS: Survey is missing channel time
Sat Nov 27 11:56:44 2021 daemon.notice hostapd: ACS: Survey is missing RX and busy time (at least one is required)
Sat Nov 27 11:56:44 2021 daemon.notice hostapd: ACS: Survey is missing channel time
Sat Nov 27 11:56:44 2021 daemon.notice hostapd: ACS: Survey is missing RX and busy time (at least one is required)
Sat Nov 27 11:56:44 2021 daemon.notice hostapd: ACS: Survey is missing channel time
Sat Nov 27 11:56:44 2021 daemon.notice hostapd: ACS: Survey is missing RX and busy time (at least one is required)
Sat Nov 27 11:56:44 2021 daemon.notice hostapd: ACS: Survey is missing channel time
Sat Nov 27 11:56:44 2021 daemon.notice hostapd: ACS: Survey is missing RX and busy time (at least one is required)
Sat Nov 27 11:56:44 2021 daemon.notice hostapd: ACS: Survey is missing channel time
Sat Nov 27 11:56:44 2021 daemon.notice hostapd: ACS: Survey is missing RX and busy time (at least one is required)
Sat Nov 27 11:56:44 2021 daemon.notice hostapd: ACS: Survey is missing channel time
Sat Nov 27 11:56:44 2021 daemon.notice hostapd: ACS: Survey is missing RX and busy time (at least one is required)
Sat Nov 27 11:56:44 2021 daemon.notice hostapd: ACS: Survey is missing channel time
Sat Nov 27 11:56:44 2021 daemon.notice hostapd: ACS: Survey is missing RX and busy time (at least one is required)
Sat Nov 27 11:56:44 2021 daemon.notice hostapd: ACS: Survey is missing channel time
Sat Nov 27 11:56:44 2021 daemon.notice hostapd: ACS: Survey is missing RX and busy time (at least one is required)
Sat Nov 27 11:56:44 2021 daemon.notice hostapd: ACS: Survey is missing channel time
Sat Nov 27 11:56:44 2021 daemon.notice hostapd: ACS: Survey is missing RX and busy time (at least one is required)
Sat Nov 27 11:56:44 2021 daemon.notice hostapd: ACS: Survey is missing channel time
Sat Nov 27 11:56:44 2021 daemon.notice hostapd: ACS: Survey is missing RX and busy time (at least one is required)
Sat Nov 27 11:56:44 2021 daemon.notice hostapd: ACS: Survey is missing channel time
Sat Nov 27 11:56:44 2021 daemon.notice hostapd: ACS: Survey is missing RX and busy time (at least one is required)
Sat Nov 27 11:56:44 2021 daemon.notice hostapd: ACS: Survey is missing channel time
Sat Nov 27 11:56:44 2021 daemon.notice hostapd: ACS: Survey is missing RX and busy time (at least one is required)
Sat Nov 27 11:56:44 2021 daemon.notice hostapd: wlan1: ACS-COMPLETED freq=2412 channel=1
Sat Nov 27 11:56:44 2021 daemon.err hostapd: Failed to initialize QoS Map
Sat Nov 27 11:56:44 2021 daemon.warn hostapd: wlan1: Could not connect to kernel driver
Sat Nov 27 11:56:44 2021 daemon.err hostapd: Interface initialization failed
Sat Nov 27 11:56:44 2021 daemon.notice hostapd: wlan1: interface state ACS->DISABLED
Sat Nov 27 11:56:44 2021 daemon.notice hostapd: wlan1: AP-DISABLED
Sat Nov 27 11:56:44 2021 daemon.err hostapd: ACS: Possibly channel configuration is invalid, please report this along with your config file.
Sat Nov 27 11:56:44 2021 daemon.err hostapd: ACS: Failed to start
Sat Nov 27 11:56:44 2021 daemon.notice hostapd: wlan1: AP-DISABLED
Sat Nov 27 11:56:44 2021 daemon.err hostapd: hostapd_free_hapd_data: Interface wlan1 wasn't started
Sat Nov 27 11:56:44 2021 daemon.notice hostapd: nl80211: deinit ifname=wlan1 disabled_11b_rates=0
Sat Nov 27 11:56:44 2021 kern.info kernel: [38472.178634] device wlan1 left promiscuous mode
Sat Nov 27 11:56:44 2021 kern.info kernel: [38472.184000] br-lan: port 3(wlan1) entered disabled state
Sat Nov 27 11:56:45 2021 daemon.notice hostapd: wlan1: interface state DISABLED->DISABLED
best move is to make sure you are running absolute official (clarification: OpenWrt) firmware source (exclude any build related possibilities);
so;
cd /
wget http://rpi4.wulfy23.info/misc/lib-firmware-brcm-r18161_orig.tar.gz
rm /lib/firmware/brcm/*
tar -xzf lib-firmware-brcm-r18161_orig.tar.gz
reboot
create a new thread linking/including both your log/dmesg above and most importantly your /etc/config/wireless
there are many more skilled than I with wireless related stuff on the general forum threads...
the above said... r18161 is right on the border of alot of 'cutting edge' wireless related commits to master... and as a general rule... i'd recommend most people who wish to rely on wireless for these boards to run or at least compare operation with 21.02...
but my hunch is that is not the primary reason behind the current issues you are experiencing... a history about what you have recently done, whether or not it was ever working, whether you set the otp country etc. etc. all are important kinds of information when seeking support
(then again... just saw the QoS map line in the output so maybe it is master related... there are a few related posts on the general forum)
but you have the main bits we need already covered... your config, a log, and asking here about build related or version implications in this case will likely be 99% if the puzzle...
random observation from your support output...
this line here is anomolous... could be a false positive... but i've not seen this before...
lol... speak of the devil... i'm running the same build and you just directed me to another one i've not seen before on my system... (likely minor or a false positive or something... possibly from the 5.10 tailroom bug before the localfix triggers)
ethtool -S eth0 | grep -E '(errors:|drops:|pause:|col:|jabber:|cnt:|frags:|outrange:|unknown:)' | grep -v ': 0'
mdf_err_cnt: 30
cd /
wget http://rpi4.wulfy23.info/misc/lib-firmware-brcm-r18161_orig.tar.gz
rm /lib/firmware/brcm/*
tar -xzf lib-firmware-brcm-r18161_orig.tar.gz
reboot
done and added dmesg to Rpi4 < $(community_build) - #1669 by swanson, anything else i can do?
cheers... no, as suggested it's a matter of now seeking input on the general forum re:
general related note to everyone on this topic:
afaik master around r17700-800 was around the last time it was 'known good' (or at least comparable to 21.02 in it's operation) ...
Well then I hope my topic will get some attention, mostly my previous topics (if I hadn't posted here where the boss will always replies and fixes everything x) hadnt got as much attention, anything I should do to change that?
dalai lama pictures?
(seriously tho'... good questions usually get good answers on this forum... i've learn't 90% of most I know here... so only one way we will find out)