Rpi4 < $(community_build)

Try a tp-link ue300. It’s been tested throughly & will deliver gigabit speeds

5 Likes

I've enabled irqbalance on the stock builds and it didn't make much difference. Enabling software flow offloading makes a difference but I lose the ability to use SQM.

I've got a DFRobot Router Carrier Board and CM4 on order so hoping that's a better combo. There are lots of posts indicating gigabit is possible with the RPi4 but its not clear if they're using PPPoE or DHCP.

This is a misconception. SQM doesn’t work with hardware offloading. It’s been found to work with software flow offloading but there’s zero benefit on the rpi4b from what I could tell. Make sure you enable irqbalance in /etc/config/irqbalance, set enable=1.

3 Likes

My DFRobot is due "any day" (already have the CM4) - however, for me there's not much point, as gigabit is not attainable for me currently

Thanks for the advice, that made all the difference. Rookie mistake! Don't appear to need software flow offloading to hit gigabit speeds, even with a AX88179 adapter.

1 Like

If anyone has some advice for this one, would be highly appreciated:

@anon50098793 Does your build use hostapd by default?

or

  • .... manufeest
  • opkg list-installed | grep NAME

that said afair the main wifi change is to use wpad*openssl...

also from time to time, i've carried some wifi hacks...

  • removed the custom blob/bin 43455 around 2-3 weeks ago... was trialling for the last few months... but never tested it too much... afaik there is a newer one upstream (cypress) anyway...
  • 4-compute-model.txt was committed to master (did not check for 21.02 so that will have to go soon)
  • 43456 for the 400
  • bluetooth hcd

the rpi-foundation don't make this stuff easy so it's all just guesswork depending on what random resource I run across from time to time...

Alright, though inside the logs it seems to be hostapd runnining.

at Nov 27 01:23:22 2021 daemon.notice netifd: Wireless device 'radio1' is now up
Sat Nov 27 01:23:29 2021 daemon.notice hostapd: ACS: Survey is missing channel time
Sat Nov 27 01:23:29 2021 daemon.notice hostapd: ACS: Survey is missing RX and busy time (at least one is required)
Sat Nov 27 01:23:29 2021 daemon.notice hostapd: ACS: Survey is missing channel time
Sat Nov 27 01:23:29 2021 daemon.notice hostapd: ACS: Survey is missing RX and busy time (at least one is required)
Sat Nov 27 01:23:29 2021 daemon.notice hostapd: ACS: Survey is missing channel time
Sat Nov 27 01:23:29 2021 daemon.notice hostapd: ACS: Survey is missing RX and busy time (at least one is required)
Sat Nov 27 01:23:29 2021 daemon.notice hostapd: ACS: Survey is missing channel time
Sat Nov 27 01:23:29 2021 daemon.notice hostapd: ACS: Survey is missing RX and busy time (at least one is required)
Sat Nov 27 01:23:29 2021 daemon.notice hostapd: ACS: Survey is missing channel time
Sat Nov 27 01:23:29 2021 daemon.notice hostapd: ACS: Survey is missing RX and busy time (at least one is required)
Sat Nov 27 01:23:29 2021 daemon.notice hostapd: ACS: Survey is missing channel time
Sat Nov 27 01:23:29 2021 daemon.notice hostapd: ACS: Survey is missing RX and busy time (at least one is required)
Sat Nov 27 01:23:29 2021 daemon.notice hostapd: ACS: Survey is missing channel time
Sat Nov 27 01:23:29 2021 daemon.notice hostapd: ACS: Survey is missing RX and busy time (at least one is required)
Sat Nov 27 01:23:29 2021 daemon.notice hostapd: ACS: Survey is missing channel time
Sat Nov 27 01:23:29 2021 daemon.notice hostapd: ACS: Survey is missing RX and busy time (at least one is required)
Sat Nov 27 01:23:29 2021 daemon.notice hostapd: ACS: Survey is missing channel time
Sat Nov 27 01:23:29 2021 daemon.notice hostapd: ACS: Survey is missing RX and busy time (at least one is required)
Sat Nov 27 01:23:29 2021 daemon.notice hostapd: ACS: Survey is missing channel time
Sat Nov 27 01:23:29 2021 daemon.notice hostapd: ACS: Survey is missing RX and busy time (at least one is required)
Sat Nov 27 01:23:29 2021 daemon.notice hostapd: ACS: Survey is missing channel time
Sat Nov 27 01:23:29 2021 daemon.notice hostapd: ACS: Survey is missing RX and busy time (at least one is required)
Sat Nov 27 01:23:29 2021 daemon.notice hostapd: ACS: Survey is missing channel time
Sat Nov 27 01:23:29 2021 daemon.notice hostapd: ACS: Survey is missing RX and busy time (at least one is required)
Sat Nov 27 01:23:29 2021 daemon.notice hostapd: ACS: Survey is missing channel time
Sat Nov 27 01:23:29 2021 daemon.notice hostapd: ACS: Survey is missing RX and busy time (at least one is required)
Sat Nov 27 01:23:29 2021 daemon.notice hostapd: ACS: Survey is missing channel time
Sat Nov 27 01:23:29 2021 daemon.notice hostapd: ACS: Survey is missing RX and busy time (at least one is required)
Sat Nov 27 01:23:29 2021 daemon.notice hostapd: ACS: Survey is missing channel time
Sat Nov 27 01:23:29 2021 daemon.notice hostapd: ACS: Survey is missing RX and busy time (at least one is required)
Sat Nov 27 01:23:29 2021 daemon.notice hostapd: ACS: Survey is missing channel time
Sat Nov 27 01:23:29 2021 daemon.notice hostapd: ACS: Survey is missing RX and busy time (at least one is required)
Sat Nov 27 01:23:29 2021 daemon.notice hostapd: ACS: Survey is missing channel time
Sat Nov 27 01:23:29 2021 daemon.notice hostapd: ACS: Survey is missing RX and busy time (at least one is required)
Sat Nov 27 01:23:29 2021 daemon.notice hostapd: ACS: Survey is missing channel time
Sat Nov 27 01:23:29 2021 daemon.notice hostapd: ACS: Survey is missing RX and busy time (at least one is required)
Sat Nov 27 01:23:29 2021 daemon.notice hostapd: ACS: Survey is missing channel time
Sat Nov 27 01:23:29 2021 daemon.notice hostapd: ACS: Survey is missing RX and busy time (at least one is required)
Sat Nov 27 01:23:29 2021 daemon.notice hostapd: ACS: Survey is missing channel time
Sat Nov 27 01:23:29 2021 daemon.notice hostapd: ACS: Survey is missing RX and busy time (at least one is required)
Sat Nov 27 01:23:29 2021 daemon.notice hostapd: ACS: Survey is missing channel time
Sat Nov 27 01:23:29 2021 daemon.notice hostapd: ACS: Survey is missing RX and busy time (at least one is required)
Sat Nov 27 01:23:29 2021 daemon.notice hostapd: ACS: Survey is missing channel time
Sat Nov 27 01:23:29 2021 daemon.notice hostapd: ACS: Survey is missing RX and busy time (at least one is required)
Sat Nov 27 01:23:29 2021 daemon.notice hostapd: ACS: Survey is missing channel time
Sat Nov 27 01:23:29 2021 daemon.notice hostapd: ACS: Survey is missing RX and busy time (at least one is required)
Sat Nov 27 01:23:29 2021 daemon.notice hostapd: wlan1: ACS-COMPLETED freq=2412 channel=1
Sat Nov 27 01:23:29 2021 daemon.err hostapd: Failed to initialize QoS Map
Sat Nov 27 01:23:29 2021 daemon.warn hostapd: wlan1: Could not connect to kernel driver
Sat Nov 27 01:23:29 2021 daemon.err hostapd: Interface initialization failed
Sat Nov 27 01:23:29 2021 daemon.notice hostapd: wlan1: interface state ACS->DISABLED
Sat Nov 27 01:23:29 2021 daemon.notice hostapd: wlan1: AP-DISABLED
Sat Nov 27 01:23:29 2021 daemon.err hostapd: ACS: Possibly channel configuration is invalid, please report this along with your config file.
Sat Nov 27 01:23:29 2021 daemon.err hostapd: ACS: Failed to start
Sat Nov 27 01:23:29 2021 daemon.notice hostapd: wlan1: AP-DISABLED
Sat Nov 27 01:23:29 2021 daemon.err hostapd: hostapd_free_hapd_data: Interface wlan1 wasn't started
Sat Nov 27 01:23:29 2021 daemon.notice hostapd: nl80211: deinit ifname=wlan1 disabled_11b_rates=0
Sat Nov 27 01:23:29 2021 kern.info kernel: [  476.779528] device wlan1 left promiscuous mode
Sat Nov 27 01:23:29 2021 kern.info kernel: [  476.785160] br-lan: port 2(wlan1) entered disabled state
Sat Nov 27 01:23:30 2021 daemon.notice hostapd: wlan1: interface state DISABLED->DISABLED

BTW: Do you have any idea how I could proceed to fix this wifi problem of mine? I quite ran out of ideas.

wpad = hostapd

post rpi-support.sh; uci show wireless; iw reg get

(remove psk/password and change wifi ssid name)

################################# root-dev: /dev/mmcblk0p2:07022009-02 boot-dev: /dev/mmcblk0p1
root@boot: PARTUUID=07022009-02
root@cmdline: PARTUUID=07022009-02
################################## 4B 1.4 2GB Sony_UK b03114
############ buildid:r18161-00ce13490a localversion:3.5.151-26 files:65316b783 variant:fullest
############ fwV:Feb162021 vlV:000138a1
############ fwWIFI: Firmware: BCM4345/6 wl0: Mar 23 2020 02:20:01 version 7.45.206 (r725000 CY) FWID 01-febaba43
raspberrypi-firmware: 2021-10-19T11:50:10, 0403e22018aafab833d0a16374ac773f66fd7be9
################################# wrt.ini brief
ENABLEDSERVICES="banip adblock dbus modemanager" #[fboot/upgrade] enable+start
LUCIQRCODES=1
WIFIAUTOSETUP=1
POWERPROFILE="quick"
RPI_EEPROM_CONFIG_HOOK_FILE_RECOMMENDED="/etc/custom/4-model-b/eeprom.config.recommended"
RPI4CMDLINEOPTS="fsckparts"
ROOTFSEXPAND=1
#################################
  UPTIME: 11:46:0810:30,  0.10, 0.05, 0.00
   DISKS: 4%:/ 0%:/tmp 35%:/boot 4%:/opt/docker 4%:/opt/docker/overlay2/6ddb4ae061c3bc72ee111574228ee2c4002da36a4858712385cc7a149561226e/merged 
################################# hardware info
Revision        : b03114
Serial          : 10000000e12648b2
Model           : Raspberry Pi 4 Model B Rev 1.4
################################# cmdline.txt
console=serial0,115200 console=tty1 root=PARTUUID=07022009-02 rootfstype=squashfs,ext4 rootwait pci=pcie_bus_perf fsckparts
################################# config.txt
dtparam=sd_poll_once
#################################
BOOTORDER: 
### uptime:  11:46:08 up 10:30,  load average: 0.10, 0.05, 0.00
### network CT:262 LP:47
### Mem: 542176K used, 1359464K free, 3268K shrd, 21528K buff, 219516K cached
### CPU:   0% usr   2% sys   0% nic  97% idle   0% io   0% irq   0% sirq
### Time       Temp     CPU     Core         Health           Vcore    PMIC
### 11:46:09  34.0'C  1500MHz  500MHz  00000000000000000000  0.8600V  37.3'C
SCALING:ondemand thresh:21 min:1100000 max:1500000 cur:1500000 TIME:1100000:3440358 1200000:437 1300000:566 1400000:595 1500000:338511 
################################# opkg-repos
/etc/opkg/customfeeds.conf:src/gz git_core https://github.com/wulfy23/rpi4-opkg/raw/master/r18161-00ce13490a/core
/etc/opkg/customfeeds.conf:src/gz git_base https://github.com/wulfy23/rpi4-opkg/raw/master/r18161-00ce13490a/base
/etc/opkg/customfeeds.conf:src/gz git_luci https://github.com/wulfy23/rpi4-opkg/raw/master/r18161-00ce13490a/luci
/etc/opkg/distfeeds.conf:src/gz openwrt_kmods http://downloads.openwrt.org/snapshots/targets/bcm27xx/bcm2711/kmods/5.10.80-1-c607de81a52d4ba7e116a2343b96ea4f
/etc/opkg/distfeeds.conf:src/gz openwrt_packages http://downloads.openwrt.org/snapshots/packages/aarch64_cortex-a72/packages
/etc/opkg/distfeeds.conf:src/gz openwrt_routing http://downloads.openwrt.org/snapshots/packages/aarch64_cortex-a72/routing
/etc/opkg/distfeeds.conf:src/gz openwrt_telephony http://downloads.openwrt.org/snapshots/packages/aarch64_cortex-a72/telephony
########################################## GPIO
gpiochip0: GPIOs 0-57, parent: platform/fe200000.gpio, pinctrl-bcm2711:
 gpio-0   (ID_SDA              )
 gpio-1   (ID_SCL              )
 gpio-2   (SDA1                )
 gpio-3   (SCL1                )
 gpio-4   (GPIO_GCLK           )
 gpio-5   (GPIO5               )
 gpio-6   (GPIO6               )
 gpio-7   (SPI_CE1_N           )
 gpio-8   (SPI_CE0_N           )
 gpio-9   (SPI_MISO            )
 gpio-10  (SPI_MOSI            )
 gpio-11  (SPI_SCLK            )
 gpio-12  (GPIO12              )
 gpio-13  (GPIO13              )
 gpio-14  (TXD1                )
 gpio-15  (RXD1                )
 gpio-16  (GPIO16              )
 gpio-17  (GPIO17              )
 gpio-18  (GPIO18              )
 gpio-19  (GPIO19              )
 gpio-20  (GPIO20              )
 gpio-21  (GPIO21              )
 gpio-22  (GPIO22              )
 gpio-23  (GPIO23              )
 gpio-24  (GPIO24              )
 gpio-25  (GPIO25              )
 gpio-26  (GPIO26              )
 gpio-27  (GPIO27              )
 gpio-28  (RGMII_MDIO          )
 gpio-29  (RGMIO_MDC           )
 gpio-30  (CTS0                )
 gpio-31  (RTS0                )
 gpio-32  (TXD0                )
 gpio-33  (RXD0                )
 gpio-34  (SD1_CLK             )
 gpio-35  (SD1_CMD             )
 gpio-36  (SD1_DATA0           )
 gpio-37  (SD1_DATA1           )
 gpio-38  (SD1_DATA2           )
 gpio-39  (SD1_DATA3           )
 gpio-40  (PWM0_MISO           )
 gpio-41  (PWM1_MOSI           )
 gpio-42  (STATUS_LED_G_CLK    |led0                ) out lo 
 gpio-43  (SPIFLASH_CE_N       )
 gpio-44  (SDA0                )
 gpio-45  (SCL0                )
 gpio-46  (RGMII_RXCLK         )
 gpio-47  (RGMII_RXCTL         )
 gpio-48  (RGMII_RXD0          )
 gpio-49  (RGMII_RXD1          )
 gpio-50  (RGMII_RXD2          )
 gpio-51  (RGMII_RXD3          )
 gpio-52  (RGMII_TXCLK         )
 gpio-53  (RGMII_TXCTL         )
 gpio-54  (RGMII_TXD0          )
 gpio-55  (RGMII_TXD1          )
 gpio-56  (RGMII_TXD2          )
 gpio-57  (RGMII_TXD3          )

gpiochip1: GPIOs 504-511, parent: platform/soc:firmware:gpio, raspberrypi-exp-gpio, can sleep:
 gpio-504 (BT_ON               )
 gpio-505 (WL_ON               )
 gpio-506 (PWR_LED_OFF         |led1                ) out hi ACTIVE LOW
 gpio-507 (GLOBAL_RESET        )
 gpio-508 (VDD_SD_IO_SEL       |vdd-sd-io           ) out hi 
 gpio-509 (CAM_GPIO            )
 gpio-510 (SD_PWR_ON           |sd_vcc_reg          ) out hi 
 gpio-511 (SD_OC_N             )
################################# interface-report
############### lo [ok]  yes 
############### eth0 err:     rx_pause: 8199987 bcmgenet yes 1000Mb/s
############### eth1 [ok] r8152 yes 1000Mb/s
############### br-lan [ok] bridge yes 1000Mb/s
############### br-dcd626a67eeb [ok] bridge yes 10000Mb/s
############### vethfd3b4a4 [ok] veth yes 10000Mb/s
################################# packages-restore-actions
################################# packages-restored-RAWDIRECT
################################################ firstboot  pkgpending 202111262000
################################### Added... 49
btrfs-progs
containerd
docker
docker-compose
dockerd
findutils-find
findutils-locate
kmod-br-netfilter
kmod-dax
kmod-dm
kmod-fs-btrfs
kmod-keys-encrypted
kmod-keys-trusted
kmod-lib-lzo
kmod-lib-raid6
kmod-lib-xor
kmod-lib-zlib-deflate
kmod-lib-zstd
kmod-mt76-core
kmod-mt76-usb
kmod-mt76x02-common
kmod-mt76x02-usb
kmod-mt76x2-common
kmod-mt76x2u
kmod-nf-ipvs
kmod-random-core
kmod-tpm
libdevmapper
libnetwork
libseccomp
libyaml
luci-lib-docker
python3-attrs
python3-bcrypt
python3-cached-property
python3-cryptography
python3-distro
python3-docker
python3-dockerpty
python3-docopt
python3-dotenv
python3-jsonschema
python3-paramiko
python3-pyrsistent
python3-texttable
python3-websocket-client
python3-yaml
runc
tini
################################### Removed... 0
################################################ firstboot  pkgpending 202111262000
################################### Added... 49
btrfs-progs
containerd
docker
docker-compose
dockerd
findutils-find
findutils-locate
kmod-br-netfilter
kmod-dax
kmod-dm
kmod-fs-btrfs
kmod-keys-encrypted
kmod-keys-trusted
kmod-lib-lzo
kmod-lib-raid6
kmod-lib-xor
kmod-lib-zlib-deflate
kmod-lib-zstd
kmod-mt76-core
kmod-mt76-usb
kmod-mt76x02-common
kmod-mt76x02-usb
kmod-mt76x2-common
kmod-mt76x2u
kmod-nf-ipvs
kmod-random-core
kmod-tpm
libdevmapper
libnetwork
libseccomp
libyaml
luci-lib-docker
python3-attrs
python3-bcrypt
python3-cached-property
python3-cryptography
python3-distro
python3-docker
python3-dockerpty
python3-docopt
python3-dotenv
python3-jsonschema
python3-paramiko
python3-pyrsistent
python3-texttable
python3-websocket-client
python3-yaml
runc
tini
################################### Removed... 0
################################# autorestore-running-RAWDIRECT
#opkg install --force-checksum btrfs-progs #[ok-firstboot]#opK-R
#opkg install --force-checksum containerd #[ok-firstboot]#opK-R
#opkg install --force-checksum docker #[ok-firstboot]#opK-R
#opkg install --force-checksum docker-compose #[ok-firstboot]#opK-R
#opkg install --force-checksum dockerd #[ok-firstboot]#opK-R
#opkg install --force-checksum findutils-find #[ok-firstboot]#opK-R
#opkg install --force-checksum findutils-locate #[ok-firstboot]#opK-R
#opkg install --force-checksum kmod-br-netfilter #[ok-instonsys-firstboot]#opK-R
#opkg install --force-checksum kmod-dax #[ok-instonsys-firstboot]#opK-R
#opkg install --force-checksum kmod-dm #[ok-instonsys-firstboot]#opK-R
#opkg install --force-checksum kmod-fs-btrfs #[ok-instonsys-firstboot]#opK-R
#opkg install --force-checksum kmod-keys-encrypted #[ok-instonsys-firstboot]#opK-R
#opkg install --force-checksum kmod-keys-trusted #[ok-instonsys-firstboot]#opK-R
#opkg install --force-checksum kmod-lib-lzo #[ok-instonsys-firstboot]#opK-R
#opkg install --force-checksum kmod-lib-raid6 #[ok-instonsys-firstboot]#opK-R
#opkg install --force-checksum kmod-lib-xor #[ok-instonsys-firstboot]#opK-R
#opkg install --force-checksum kmod-lib-zlib-deflate #[ok-instonsys-firstboot]#opK-R
#opkg install --force-checksum kmod-lib-zstd #[ok-instonsys-firstboot]#opK-R
#opkg install --force-checksum kmod-mt76-core #[ok-firstboot]#opK-R
#opkg install --force-checksum kmod-mt76-usb #[ok-firstboot]#opK-R
#opkg install --force-checksum kmod-mt76x02-common #[ok-firstboot]#opK-R
#opkg install --force-checksum kmod-mt76x02-usb #[ok-firstboot]#opK-R
#opkg install --force-checksum kmod-mt76x2-common #[ok-firstboot]#opK-R
#opkg install --force-checksum kmod-mt76x2u #[ok-firstboot]#opK-R
#opkg install --force-checksum kmod-nf-ipvs #[ok-instonsys-firstboot]#opK-R
#opkg install --force-checksum kmod-random-core #[ok-instonsys-firstboot]#opK-R
#opkg install --force-checksum kmod-tpm #[ok-instonsys-firstboot]#opK-R
#opkg install --force-checksum libdevmapper #[ok-instonsys-firstboot]#opK-R
#opkg install --force-checksum libnetwork #[ok-instonsys-firstboot]#opK-R
#opkg install --force-checksum libseccomp #[ok-instonsys-firstboot]#opK-R
opkg install --force-checksum libwebsockets-full #[fail-firstboot]#[fail-firstboot]#opK-R
#opkg install --force-checksum libyaml #[ok-firstboot]#opK-R
opkg install --force-checksum luci-app-argon-config #[unknown-firstboot]#[unknown-firstboot]#opK-R
opkg install --force-checksum luci-app-dockerman #[fail-firstboot]#[fail-firstboot]#opK-R
#opkg install --force-checksum luci-lib-docker #[ok-instonsys-firstboot]#opK-R
#opkg install --force-checksum python3-attrs #[ok-firstboot]#opK-R
#opkg install --force-checksum python3-bcrypt #[ok-firstboot]#opK-R
#opkg install --force-checksum python3-cached-property #[ok-firstboot]#opK-R
#opkg install --force-checksum python3-cryptography #[ok-firstboot]#opK-R
#opkg install --force-checksum python3-distro #[ok-firstboot]#opK-R
#opkg install --force-checksum python3-docker #[ok-firstboot]#opK-R
#opkg install --force-checksum python3-dockerpty #[ok-firstboot]#opK-R
#opkg install --force-checksum python3-docopt #[ok-firstboot]#opK-R
#opkg install --force-checksum python3-dotenv #[ok-firstboot]#opK-R
#opkg install --force-checksum python3-jsonschema #[ok-firstboot]#opK-R
#opkg install --force-checksum python3-paramiko #[ok-instonsys-firstboot]#opK-R
#opkg install --force-checksum python3-pyrsistent #[ok-instonsys-firstboot]#opK-R
#opkg install --force-checksum python3-texttable #[ok-firstboot]#opK-R
#opkg install --force-checksum python3-websocket-client #[ok-instonsys-firstboot]#opK-R
#opkg install --force-checksum python3-yaml #[ok-firstboot]#opK-R
#opkg install --force-checksum runc #[ok-instonsys-firstboot]#opK-R
#opkg install --force-checksum tini #[ok-instonsys-firstboot]#opK-R
opkg install --force-checksum ttyd #[fail-firstboot]#[fail-firstboot]#opK-R
wireless.radio0=wifi-device
wireless.radio0.type='mac80211'
wireless.radio0.path='scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.1/1-1.1:1.0'
wireless.radio0.cell_density='0'
wireless.radio0.channel='auto'
wireless.radio0.band='5g'
wireless.radio0.htmode='VHT80'
wireless.radio0.log_level='1'
wireless.radio0.disabled='1'
wireless.default_radio0=wifi-iface
wireless.default_radio0.device='radio0'
wireless.default_radio0.network='lan'
wireless.default_radio0.mode='ap'
wireless.default_radio0.ssid='wifi0'
wireless.default_radio0.encryption='psk2'
wireless.default_radio0.key='abcd12345'
wireless.default_radio0.disabled='1'
wireless.radio1=wifi-device
wireless.radio1.type='mac80211'
wireless.radio1.path='platform/soc/fe300000.mmcnr/mmc_host/mmc1/mmc1:0001/mmc1:0001:1'
wireless.radio1.band='2g'
wireless.radio1.cell_density='0'
wireless.radio1.country='DE'
wireless.radio1.log_level='1'
wireless.radio1.legacy_rates='1'
wireless.radio1.channel='auto'
wireless.default_radio1=wifi-iface
wireless.default_radio1.device='radio1'
wireless.default_radio1.network='lan'
wireless.default_radio1.mode='ap'
wireless.default_radio1.ssid='wifi1'
wireless.default_radio1.encryption='psk2'
wireless.default_radio1.key='dadadadada132131'
wireless.default_radio1.wmm='0'
global
country DE: DFS-ETSI
        (2400 - 2483 @ 40), (N/A, 20), (N/A)
        (5150 - 5250 @ 80), (N/A, 23), (N/A), NO-OUTDOOR, AUTO-BW
        (5250 - 5350 @ 80), (N/A, 20), (0 ms), NO-OUTDOOR, DFS, AUTO-BW
        (5470 - 5725 @ 160), (N/A, 26), (0 ms), DFS
        (5725 - 5875 @ 80), (N/A, 13), (N/A)
        (5945 - 6425 @ 160), (N/A, 23), (N/A), NO-OUTDOOR, AUTO-BW
        (57000 - 66000 @ 2160), (N/A, 40), (N/A)

phy#1
country 99: DFS-UNSET
        (2402 - 2482 @ 40), (6, 20), (N/A)
        (2474 - 2494 @ 20), (6, 20), (N/A)
        (5140 - 5360 @ 160), (6, 20), (N/A)
        (5460 - 5860 @ 160), (6, 20), (N/A)

remove psk/password and change wifi ssid name

Did that earlier, during my tests I was going with open network as well, didn't help

EDIT: Did it again, got the same situation though, here is the log:

Sat Nov 27 11:56:26 2021 daemon.notice netifd: Wireless device 'radio1' is now down
Sat Nov 27 11:56:35 2021 daemon.notice netifd: radio1 (4671): command failed: No error information (-524)
Sat Nov 27 11:56:35 2021 daemon.notice netifd: radio1 (4671): command failed: I/O error (-5)
Sat Nov 27 11:56:36 2021 daemon.notice hostapd: Configuration file: /var/run/hostapd-phy1.conf (phy wlan1) --> new PHY
Sat Nov 27 11:56:36 2021 kern.info kernel: [38464.045049] br-lan: port 3(wlan1) entered blocking state
Sat Nov 27 11:56:36 2021 kern.info kernel: [38464.051244] br-lan: port 3(wlan1) entered disabled state
Sat Nov 27 11:56:36 2021 kern.info kernel: [38464.057545] device wlan1 entered promiscuous mode
Sat Nov 27 11:56:36 2021 daemon.notice hostapd: wlan1: interface state UNINITIALIZED->COUNTRY_UPDATE
Sat Nov 27 11:56:36 2021 daemon.notice hostapd: ACS: Automatic channel selection started, this may take a bit
Sat Nov 27 11:56:36 2021 daemon.notice hostapd: wlan1: interface state COUNTRY_UPDATE->ACS
Sat Nov 27 11:56:36 2021 daemon.notice hostapd: wlan1: ACS-STARTED
Sat Nov 27 11:56:37 2021 daemon.notice netifd: Wireless device 'radio1' is now up
Sat Nov 27 11:56:44 2021 daemon.notice hostapd: ACS: Survey is missing channel time
Sat Nov 27 11:56:44 2021 daemon.notice hostapd: ACS: Survey is missing RX and busy time (at least one is required)
Sat Nov 27 11:56:44 2021 daemon.notice hostapd: ACS: Survey is missing channel time
Sat Nov 27 11:56:44 2021 daemon.notice hostapd: ACS: Survey is missing RX and busy time (at least one is required)
Sat Nov 27 11:56:44 2021 daemon.notice hostapd: ACS: Survey is missing channel time
Sat Nov 27 11:56:44 2021 daemon.notice hostapd: ACS: Survey is missing RX and busy time (at least one is required)
Sat Nov 27 11:56:44 2021 daemon.notice hostapd: ACS: Survey is missing channel time
Sat Nov 27 11:56:44 2021 daemon.notice hostapd: ACS: Survey is missing RX and busy time (at least one is required)
Sat Nov 27 11:56:44 2021 daemon.notice hostapd: ACS: Survey is missing channel time
Sat Nov 27 11:56:44 2021 daemon.notice hostapd: ACS: Survey is missing RX and busy time (at least one is required)
Sat Nov 27 11:56:44 2021 daemon.notice hostapd: ACS: Survey is missing channel time
Sat Nov 27 11:56:44 2021 daemon.notice hostapd: ACS: Survey is missing RX and busy time (at least one is required)
Sat Nov 27 11:56:44 2021 daemon.notice hostapd: ACS: Survey is missing channel time
Sat Nov 27 11:56:44 2021 daemon.notice hostapd: ACS: Survey is missing RX and busy time (at least one is required)
Sat Nov 27 11:56:44 2021 daemon.notice hostapd: ACS: Survey is missing channel time
Sat Nov 27 11:56:44 2021 daemon.notice hostapd: ACS: Survey is missing RX and busy time (at least one is required)
Sat Nov 27 11:56:44 2021 daemon.notice hostapd: ACS: Survey is missing channel time
Sat Nov 27 11:56:44 2021 daemon.notice hostapd: ACS: Survey is missing RX and busy time (at least one is required)
Sat Nov 27 11:56:44 2021 daemon.notice hostapd: ACS: Survey is missing channel time
Sat Nov 27 11:56:44 2021 daemon.notice hostapd: ACS: Survey is missing RX and busy time (at least one is required)
Sat Nov 27 11:56:44 2021 daemon.notice hostapd: ACS: Survey is missing channel time
Sat Nov 27 11:56:44 2021 daemon.notice hostapd: ACS: Survey is missing RX and busy time (at least one is required)
Sat Nov 27 11:56:44 2021 daemon.notice hostapd: ACS: Survey is missing channel time
Sat Nov 27 11:56:44 2021 daemon.notice hostapd: ACS: Survey is missing RX and busy time (at least one is required)
Sat Nov 27 11:56:44 2021 daemon.notice hostapd: ACS: Survey is missing channel time
Sat Nov 27 11:56:44 2021 daemon.notice hostapd: ACS: Survey is missing RX and busy time (at least one is required)
Sat Nov 27 11:56:44 2021 daemon.notice hostapd: ACS: Survey is missing channel time
Sat Nov 27 11:56:44 2021 daemon.notice hostapd: ACS: Survey is missing RX and busy time (at least one is required)
Sat Nov 27 11:56:44 2021 daemon.notice hostapd: ACS: Survey is missing channel time
Sat Nov 27 11:56:44 2021 daemon.notice hostapd: ACS: Survey is missing RX and busy time (at least one is required)
Sat Nov 27 11:56:44 2021 daemon.notice hostapd: ACS: Survey is missing channel time
Sat Nov 27 11:56:44 2021 daemon.notice hostapd: ACS: Survey is missing RX and busy time (at least one is required)
Sat Nov 27 11:56:44 2021 daemon.notice hostapd: ACS: Survey is missing channel time
Sat Nov 27 11:56:44 2021 daemon.notice hostapd: ACS: Survey is missing RX and busy time (at least one is required)
Sat Nov 27 11:56:44 2021 daemon.notice hostapd: ACS: Survey is missing channel time
Sat Nov 27 11:56:44 2021 daemon.notice hostapd: ACS: Survey is missing RX and busy time (at least one is required)
Sat Nov 27 11:56:44 2021 daemon.notice hostapd: ACS: Survey is missing channel time
Sat Nov 27 11:56:44 2021 daemon.notice hostapd: ACS: Survey is missing RX and busy time (at least one is required)
Sat Nov 27 11:56:44 2021 daemon.notice hostapd: ACS: Survey is missing channel time
Sat Nov 27 11:56:44 2021 daemon.notice hostapd: ACS: Survey is missing RX and busy time (at least one is required)
Sat Nov 27 11:56:44 2021 daemon.notice hostapd: ACS: Survey is missing channel time
Sat Nov 27 11:56:44 2021 daemon.notice hostapd: ACS: Survey is missing RX and busy time (at least one is required)
Sat Nov 27 11:56:44 2021 daemon.notice hostapd: ACS: Survey is missing channel time
Sat Nov 27 11:56:44 2021 daemon.notice hostapd: ACS: Survey is missing RX and busy time (at least one is required)
Sat Nov 27 11:56:44 2021 daemon.notice hostapd: ACS: Survey is missing channel time
Sat Nov 27 11:56:44 2021 daemon.notice hostapd: ACS: Survey is missing RX and busy time (at least one is required)
Sat Nov 27 11:56:44 2021 daemon.notice hostapd: wlan1: ACS-COMPLETED freq=2412 channel=1
Sat Nov 27 11:56:44 2021 daemon.err hostapd: Failed to initialize QoS Map
Sat Nov 27 11:56:44 2021 daemon.warn hostapd: wlan1: Could not connect to kernel driver
Sat Nov 27 11:56:44 2021 daemon.err hostapd: Interface initialization failed
Sat Nov 27 11:56:44 2021 daemon.notice hostapd: wlan1: interface state ACS->DISABLED
Sat Nov 27 11:56:44 2021 daemon.notice hostapd: wlan1: AP-DISABLED
Sat Nov 27 11:56:44 2021 daemon.err hostapd: ACS: Possibly channel configuration is invalid, please report this along with your config file.
Sat Nov 27 11:56:44 2021 daemon.err hostapd: ACS: Failed to start
Sat Nov 27 11:56:44 2021 daemon.notice hostapd: wlan1: AP-DISABLED
Sat Nov 27 11:56:44 2021 daemon.err hostapd: hostapd_free_hapd_data: Interface wlan1 wasn't started
Sat Nov 27 11:56:44 2021 daemon.notice hostapd: nl80211: deinit ifname=wlan1 disabled_11b_rates=0
Sat Nov 27 11:56:44 2021 kern.info kernel: [38472.178634] device wlan1 left promiscuous mode
Sat Nov 27 11:56:44 2021 kern.info kernel: [38472.184000] br-lan: port 3(wlan1) entered disabled state
Sat Nov 27 11:56:45 2021 daemon.notice hostapd: wlan1: interface state DISABLED->DISABLED
1 Like

best move is to make sure you are running absolute official (clarification: OpenWrt) firmware source (exclude any build related possibilities);

so;


cd /
wget http://rpi4.wulfy23.info/misc/lib-firmware-brcm-r18161_orig.tar.gz
rm /lib/firmware/brcm/*
tar -xzf lib-firmware-brcm-r18161_orig.tar.gz
reboot

create a new thread linking/including both your log/dmesg above and most importantly your /etc/config/wireless

there are many more skilled than I with wireless related stuff on the general forum threads...


the above said... r18161 is right on the border of alot of 'cutting edge' wireless related commits to master... and as a general rule... i'd recommend most people who wish to rely on wireless for these boards to run or at least compare operation with 21.02...

but my hunch is that is not the primary reason behind the current issues you are experiencing... a history about what you have recently done, whether or not it was ever working, whether you set the otp country etc. etc. all are important kinds of information when seeking support

(then again... just saw the QoS map line in the output so maybe it is master related... there are a few related posts on the general forum)

but you have the main bits we need already covered... your config, a log, and asking here about build related or version implications in this case will likely be 99% if the puzzle...


random observation from your support output...

this line here is anomolous... could be a false positive... but i've not seen this before...

lol... speak of the devil... i'm running the same build and you just directed me to another one i've not seen before on my system... (likely minor or a false positive or something... possibly from the 5.10 tailroom bug before the localfix triggers)

ethtool -S eth0 | grep -E '(errors:|drops:|pause:|col:|jabber:|cnt:|frags:|outrange:|unknown:)' | grep -v ': 0'
     mdf_err_cnt: 30
cd /
wget http://rpi4.wulfy23.info/misc/lib-firmware-brcm-r18161_orig.tar.gz
rm /lib/firmware/brcm/*
tar -xzf lib-firmware-brcm-r18161_orig.tar.gz
reboot

done and added dmesg to Rpi4 < $(community_build) - #1669 by swanson, anything else i can do?

1 Like

cheers... no, as suggested it's a matter of now seeking input on the general forum re:

  • your settings and/or r18161 specific things
    or
  • downgrading to 21.02 to see how that goes... (note: if it's not working off the bat once settings are sorted... you can use the same firmware .tar / method on 21 to make sure you are working with official blobs...
    (21.02 is a much more well known entity and much easier to say with certainty what will and will not work regarding settings)

general related note to everyone on this topic:

afaik master around r17700-800 was around the last time it was 'known good' (or at least comparable to 21.02 in it's operation) ...

Well then I hope my topic will get some attention, mostly my previous topics (if I hadn't posted here where the boss will always replies and fixes everything x) hadnt got as much attention, anything I should do to change that?

dalai lama pictures?

(seriously tho'... good questions usually get good answers on this forum... i've learn't 90% of most I know here... so only one way we will find out)

xDDDDDDDDDDDDDDDDD

1 Like

@anon50098793
I will be able restore all my settings on pi4 using this backup if I do a factory reset?

1 Like

if by reset you mean new fac.img to sdcard and by all settings you mean all common settings then probably ( 93% confidence )...

but there is a semi-large chance you'll end up with the same 'settings' that caused you to want to reset in the first place...?

so if it's for a newer card or something then sure...

1 Like

Is it okay to ignore this errors

sysinfo-msgs 20211128-2128
[    2.873067] fsckparts bootpart:/dev/mmcblk0p1 [unclean-fsck-repairing]
[    3.585540] fsckparts bootpart:/dev/mmcblk0p1 [unclean-fsck-ok]
throttled=0x50000 [one-undervolt+throttle] #20211128-2128

Log from rpi-throttlewatch.sh while doing speedtest on smartphone

rpi-throttlewatch.sh
taskset-aarch64 -c 0,1,2,3 /bin/rpi-throttlewatch.sh -P -C 4
NPROC:4 RUNSSLBENCH:off NPROC_SSL:2
Time       Temp     CPU     Core         Health           Vcore
21:33:04  47.2'C  1500MHz  500MHz  01010000000000000000  0.8688V
21:33:07  46.7'C  1500MHz  500MHz  01010000000000000000  0.8688V
21:33:10  46.2'C  1500MHz  500MHz  01010000000000000000  0.8688V
21:33:13  47.7'C  1500MHz  500MHz  01010000000000000000  0.8688V
21:33:16  46.7'C   600MHz  200MHz  01010000000000000101  0.8688V
21:33:19  46.2'C  1500MHz  500MHz  01010000000000000000  0.8688V
21:33:22  46.7'C   600MHz  200MHz  01010000000000000101  0.8688V
21:33:25  47.2'C  1100MHz  500MHz  01010000000000000000  0.8688V
21:33:28  47.2'C   600MHz  200MHz  01010000000000000101  0.8688V
21:33:31  46.7'C   600MHz  200MHz  01010000000000000101  0.8688V
21:33:34  46.7'C   600MHz  200MHz  01010000000000000101  0.8688V
21:33:37  46.7'C  1500MHz  500MHz  01010000000000000000  0.8688V
21:33:40  48.2'C  1500MHz  500MHz  01010000000000000000  0.8688V
21:33:43  46.7'C  1500MHz  500MHz  01010000000000000000  0.8688V
21:33:46  47.2'C   600MHz  200MHz  01010000000000000101  0.8688V
21:33:49  47.7'C  1500MHz  500MHz  01010000000000000000  0.8688V
21:33:52  48.2'C  1500MHz  500MHz  01010000000000000000  0.8688V
21:33:55  47.7'C  1500MHz  500MHz  01010000000000000000  0.8688V
21:33:58  47.2'C  1500MHz  500MHz  01010000000000000000  0.8688V
21:34:01  47.2'C  1500MHz  500MHz  01010000000000000000  0.8688V
21:34:04  47.7'C  1500MHz  500MHz  01010000000000000000  0.8688V
21:34:07  47.7'C  1500MHz  500MHz  01010000000000000000  0.8688V
21:34:10  46.7'C  1500MHz  500MHz  01010000000000000000  0.8688V
21:34:13  46.7'C  1500MHz  500MHz  01010000000000000000  0.8688V
21:34:16  47.7'C  1500MHz  500MHz  01010000000000000000  0.8688V
21:34:19  46.7'C  1500MHz  500MHz  01010000000000000000  0.8688V
21:34:22  47.7'C  1500MHz  500MHz  01010000000000000000  0.8688V
21:34:25  47.2'C  1500MHz  500MHz  01010000000000000000  0.8688V
21:34:28  47.7'C  1500MHz  500MHz  01010000000000000000  0.8688V
21:34:31  46.2'C  1500MHz  500MHz  01010000000000000000  0.8688V
1 Like