cheers will give that a try and report back
tried that ipk and also did a syspugrade to r14315-976d3e2234 just in case.
with MWAN disabled all good can route down either WAN link
enable MWAN not so good- routing badly affected 80% packet loss on WAN links
Also LUCI hangs trying to change MWAN config needing reboot to clear
So i think- better but maybe still buggy
thanks for that...
next time... to save you the hassle... should be fine to just use some 'opkg [remove||install]' action only to test newer ipk... i'll have a play over the next day or two and validate a little better what is going on...
cool many thanks i did do a opkg remove and install 1st and got weird stuff going on so i thought re flash and maybe try that as a just in case.. same routing weirdness unfortunately with packet loss...
Hi Trendy
how did u enable it?
starting from scratch, adding PPPOE, then enable Banip, selecting some IPset sources, don't get further than:
: banIP runtime information
- status : disabled
- version : 0.3.11
- util_info : -, false
- ipset_info : 0 IPSets with overall 0 IPs/Prefixes
- backup_dir : /mnt
- last_run : 11.09.2020 02:06:33
- system : Raspberry Pi 4 Model B Rev 1.2, OpenWrt SNAPSHOT r14443-f1bc66c765
tx
or from a command line;
/etc/init.d/banip enable
the git README has had a note about this... need to update the top post as it's tripped a few people up...
setting things up like this allows for packing in a wide range of packages... yet not bloating everybodys logs / performance with stuff they dont need to be running... much easier to turn on one or two things than to disable 25 
More to what @anon50098793 wrote already, I didn't start from scratch, as I had already a working banip from the previous installation. I had to enable it (service banip enable) after I upgraded.
@migube you are a genius... you've hit two birds with the one stone here...
after all my talk about disabling stuff out of the box... it seems vpn-policy-routing has snuk through the cracks... (doh!, thats the whole reason for disabling things that and two adblocks at the same time are defo nono dodo ) and seems like it might be behind some of @alpynz 's / mwan3 issues...
it was kinda unresponsive... ( to disables ) so alpy, best of you trash the package all together...
opkg remove --force-removal-of-dependent-packages vpn-policy-routing
reboot ( or full network restart ) might not hurt either...
onwards an upwards!
cheers will do and continue testing... MWAN3 2.10.0-1 seems happier but vpn policy rouitng will definetly be trying to do same thing ... was still seeing occasional LUCI hangs on config chnages to MWAN but hard to pin down...
ok... you have to make this... shoutout to DarkElvenAngel [thankyou], i used an alpine chroot on-device - /etc/init.d/ntop will set one up for you if you edit the variables at the top and start it... chroot CHROOTDIR, ( apk add dtc git make etc. ), git clone, make all, (i skipped this: make install), mkdir /run, cp argononed /usr/sbin/, cp argonone-shutdown /usr/sbin, cp argonone.dtbo /boot/overlays/ ( maybe run the setup-overlay.sh )... then likely reboot and run 'argononed' ( or add /usr/sbin/argononed & to your rc.local etc. )...
jennnniiii-i-am-runnnnniiiiiiiiiing
[root@dca632 ../argonFANcompiled 46°]# ps w | grep argon
21458 root 840 S ./argononed
21460 root 0 SW [irq/42-argonone]
[root@dca632 ../argonFANcompiled 45°]# cat /var/log/argononed.log
Sun Sep 13 17:32:02 2020
[INFO] Startup ArgonOne Daemon ver 0.1.6
[INFO] Loading Configuration
[INFO] Reading values from device-tree
[INFO] GPIO initialized
[INFO] RPI MODEL 4B 2GB rev 1.1
[INFO] Lock file created
[INFO] Now running as a daemon
[INFO] Set GPIO 4 to mode INPUT
[INFO] Set GPIO 4 pull up/down to DOWN
[INFO] Now waitting for button press
[INFO] Monitoring line 4 on /dev/gpiochip0
[INFO] Successfully opened /dev/vcio for temprature sensor
( as with most things build related, a few users need this, i'll look at integrating it (wrt.ini option and init.d script) into the build once sort out git versioning )
Thank you so much for looking into this. I have never done some of this stuff before but this is a great opportunity to learn.
I followed your explanation and the daemon is now running.
The issue is the I2C is still not working.
I have installed kmod-2c-core, i2c-tools but no i2c device appears in /dev .
Is there anything else i should be trying?
/boot/config.txt
include distroconfig.txt[all]
dtparam=i2c_arm=on
dtparam=i2c1=on
dtoverlay=argonone
argononed log
argononed log
Sun Sep 13 15:12:41 2020 [INFO] Startup ArgonOne Daemon ver 0.1.6
Sun Sep 13 15:12:41 2020 [INFO] Loading Configuration
Sun Sep 13 15:12:41 2020 [INFO] Reading values from device-tree
Sun Sep 13 15:12:41 2020 [INFO] Hysteresis set to 3
Sun Sep 13 15:12:41 2020 [INFO] Fan Speeds set to 10% 55% 100%
Sun Sep 13 15:12:41 2020 [INFO] Fan Temps set to 55 60 65
Sun Sep 13 15:12:41 2020 [INFO] GPIO initialized
Sun Sep 13 15:12:41 2020 [INFO] RPI MODEL 4B 4GB rev 1.1
Sun Sep 13 15:12:41 2020 [INFO] Lock file created
Sun Sep 13 15:12:41 2020 [CRITICAL] Failed to open the i2c bus
Sun Sep 13 15:12:41 2020 [INFO] Now running as a daemon
Sun Sep 13 15:12:41 2020 [INFO] Set GPIO 4 to mode INPUT
Sun Sep 13 15:12:41 2020 [INFO] Set GPIO 4 pull up/down to DOWN
Sun Sep 13 15:12:41 2020 [INFO] Now waitting for button press
Sun Sep 13 15:12:41 2020 [INFO] Monitoring line 4 on /dev/gpiochip0
Sun Sep 13 15:12:43 2020 [INFO] Successfully opened /dev/vcio for temprature sensor
she runs;
dtparam=i2c_arm=on #i2c-tools kmod-i2c-bcm2835|core
[root@dca632 /usbstick 47°]# i2cdetect -y 1
0 1 2 3 4 5 6 7 8 9 a b c d e f
00: -- -- -- -- -- -- -- -- -- -- -- -- --
...
try removing: dtparam=i2c1=on ( keep: dtparam=i2c_arm=on line )
Turns out i was missing kmod-i2c-bcm2835.
Seems to be working now.
Thank you very much!
just a quick report to say testing seems all ok with this MWAN vers- no LUCI hangs after 2 days and routing down 3 wan links works as per expected. seems pretty stable.. 
I have issue with SQM. I get very stuttery movement in games. Now i installed the new package
rpi4.64-snapshot-23300-1.13.57-5-r14475-ext4-sys.img
SQM is off and game is working fine without any stutter.
please show
uci show sqm
and the speeds up / down from a speedtest with nothing using the network...
you can try the command
speedtest-ookla
uci show sqm
sqm.eth1=queue
sqm.eth1.ingress_ecn='ECN'
sqm.eth1.egress_ecn='NOECN'
sqm.eth1.itarget='auto'
sqm.eth1.etarget='auto'
sqm.eth1.verbosity='5'
sqm.eth1.qdisc='cake'
sqm.eth1.qdisc_advanced='1'
sqm.eth1.squash_dscp='1'
sqm.eth1.squash_ingress='1'
sqm.eth1.qdisc_really_really_advanced='1'
sqm.eth1.eqdisc_opts='nat dual-srchost ack-filter'
sqm.eth1.linklayer='ethernet'
sqm.eth1.linklayer_advanced='1'
sqm.eth1.tcMTU='2047'
sqm.eth1.tcTSIZE='128'
sqm.eth1.linklayer_adaptation_mechanism='default'
sqm.eth1.debug_logging='1'
sqm.eth1.enabled='1'
sqm.eth1.iqdisc_opts='nat dual-dsthost ingress'
sqm.eth1.interface='eth1'
sqm.eth1.download='20100'
sqm.eth1.upload='10050'
sqm.eth1.overhead='34'
sqm.eth1.tcMPU='64'
sqm.eth1.script='piece_of_cake.qos'
Latency: 14.73 ms (0.55 ms jitter)
Download: 21.77 Mbps (data used: 19.0 MB)
Upload: 9.73 Mbps (data used: 4.4 MB)
package is 20mb download and 10mb upload
and one more thing when i was getting stuttery movement in game. Ping plotter was showing smooth pings. no packet loss whatsever