Davidc502- wrt1200ac wrt1900acx wrt3200acm wrt32x builds

Community Builds, Projects & Packages
3761

Maybe a previously answered newbie question. Does a version update erase the configuration? I'm in your previous version for WRT32X

3762

Nope it doesn't erase the configuration if you don't want it to. Please check the box keep configuration when you flash.

1 Like
3763

Thank you slim and davidc

1 Like
3764

I had gotten wireguard running, may I ask where in the luci interface do I setup/configure dnscrypt-proxy 2 ? The wrt32x router is using isp default DNS server now.

Thank you

Edit: I read previous posts it seem I will have to type commands in putty to set it up, can I follow this guide instead ? [Tutorial] [No CLI] Configuring DNS over TLS with LuCI using Stubby and Dnsmasq thank you

edit 2: to be more precise, my wrt32x WAN setting is 'use peer advertised dns' which is the DNS over tls on the forefront router, however when connected to the wireguard VPN, the client device uses its own ISP DNS server, is there a command to enforce the 'use peer advertised dns' of the VPN server router ?

edit 3: wireguard dns leak solved, always configure the dns field at wg client side configuration, i put the server(router's) local ip, so its back to the question on how to use dnscrypt or install dns over tls on luci.

3765

Unfortunately increasing max connections for DNS didn't solve my issues with r11627. After perhaps a day, dnscrypt-proxy fails again and I have to restart it. I'm back to r11266 for the time being. It's the last build I have which works well for me.

3766

@davidc502 Hi. Thanks for the builds.

I have updated recently and noticed that the Wireless configuration page changed and my additional Wi-Fi networks show "Wireless is not associated". Yet, they work. Do you have an idea what might be causing it?

3767

Also, how do I properly add WPA3 support?

3768

I had this issue myself, the only way I managed to fix it was do SSH in and issue

rm /etc/config/wireless
wifi config

Then rebooting the router and re-setup the AP's

As for WPA3 you need wpad-wolfssl I think.

1 Like
3769

I'm afraid wpa3 is a train wreck on the ac series routers. The drivers and firmware have been abandoned from a dev standpoint, so is unknown if wpa3 support will ever be in place.
Today, you can certainly test wpa3 on any of the ac series routers, but be aware it isn't supported and likely won't work properly.

Thanks,

David

1 Like
3770

Oh wow. Just looked at git repo and Marvell website page for the chip: both have been abandoned.

Do you know of any new routers based on new hardware with good drivers?

3771

I wouldn't recommend removing the entire config folder as this would remove a lot of things. This one is simpler:

rm /etc/config/wireless
wifi config

then reload ssh and reboot

3772

Opensource wifi drivers/firmware? The drivers in the ac series I would consider as 'ok' because they work well in a generic sense, but do lack in various areas I.E. some legacy/IOT devices that refuse to connect, no wpa3, no MIMO, and DFS issues to just name a few.

What I've been recommending for a long time now is to use OpenWrt as a router, and get separate AP's that run factory firmware/drivers. The router functionality alone is worth having Openwrt, and just leave the wifi portion to the manufacturer.

Edit What several of us have been talking about is to move over to clearfog solidrun - https://shop.solid-run.com/product-tag/clearfog-pro/
I would use it just as a router and add a AP to it via Ethernet port.

2 Likes
3773

Good call I forgot to add the wireless bit lol. Blonde moment.

3774

Just to clarify, these wireless issues (no working WPA3, no MIMO/ DFS, interoperability issues with esp8266) are specific to Marvell's mwlwifi firmware/ drivers - other wireless chipsets supported by OpenWrt (e.g. ath10k (QCA), mt76 (Mediatek)) are maintained and are not affected by any of these. The sad part just is that Marvell is a clear winner in terms of wired- and routing performance (aside from x86_64, it's the only target that can cope with 1 GBit/s linespeed right now), but its wireless support is… limited…

1 Like
3775

Thanks for specifying because I don't keep up.

Best Regards,

3776

Has anyone actually confirmed wpa3 trouble on these devices?
And if it's just a problem with PMF, what about relaxing that rule? That doesn't make it strictly wpa3 compliant, just wondering where the disconnect is

3777

@jeff1 and @tiagogaspar8 have been dabbling in WPA3-SAE.

I can't get 802.11w to run stably on my WRT1900ACS-UK. It works but with these issues:

  1. Optional doesn't work. Even when setting it to optional (ieee80211w=1), clients that don't support it just don't ever work. mwlwifi and hostapd sets the beacon info appropriately, but the firmware processes it as if it is still set to required (ieee80211w=2).
  2. You lose IPv6. I think it could be related to multicast packets. IGMP gets borked.

Well we can't even relax the rule to "optional" since it's broken.

3778

https://www.nxp.com/products/wireless/wi-fi-plus-bluetooth/88w8864:88W8864

https://www.nxp.com/products/wireless/wi-fi-plus-bluetooth/88w8964-dual-band-802.11ac-4x4-soc-for-very-high-throughput-wlan:88W8964

NXP has completed the acquisition of Marvell's wireless business unit on Dec 06. The ball is in NXP's court to provide support. Whether or not they'll do that – only if there is a business case. It looks like there may be a super duper tiny chance for the Wave 2 chip (8964 in the WRT32X and 3200ACM) to have ongoing (but closed/under NDA/under contract customer) support as it is not labelled as:

Not Recommended For New Designs

Archived content is no longer updated and is made available for historical reference only.

Unlike the 8864.

So their business analysts have found that there is still probable profit to be made from the AC Wave 2 chips.

1 Like
3779

Can I additional usb wifi port/ dongle to WRT3200 or WRT1900 ?

3780

Did u success in add additional dongle usb wifi to WRT3200ACM ??
What dongle is suitable for WRT3200ACM AND WRT1900 ?