few more details here if you want em. Also, if you want any explicit dumps Im burning beta to my NAND and keeping Sinovoip on my SDCard so I can swap back and forth quickly between builds.
Its pretty clear to me its not a hardware failure, in that the sinovoip build lets me get much higher dbm; I'm guessing it's some interaction of driver, eeprom and reg settings - but I'm way to noob to diagnose it so far. I wonder if it's possible to load the eeprom / eeprom settings from a device that works in beta 24 to one that doesnt?
Any chance to add kmod-tun to this build ? That's only part I'm missing to use tailscale.
I also noticed on last build that cpu fan is constantly at full speed...
My plan in this thread is not to build releases according to users wishes, but to develop a fully functional wifi 7 mlo ...but here you have it sysupgrade
Otherwise you can use openwork mainline releases without any problem
All releases in this thread are experimental and not built using the mainline openwrt build system, so if you want to modify something in the source, you should do it in the mainline source. The other option is to try using this BPI-R4_MLO_beta1_FM350-GL
Good afternoon colleagues, I was bored and I did this in case you want to have this image as the main one, but removing the networks that were open and could enter the router. There are 3 different wireguard configurations.
The only bad thing is that only the word DIGI appears, I have not managed to get MT76_AP_MLD to appear.
I have completely eliminated 2g, and 5g is also eliminated, the line that was open so that people can use it if they want for the moment as the main one without being afraid of someone getting into the router.
The wifi passwords are all 12345678, then in the wireguard network configuration it has xxxxxxxxxxxxxx, so that people can put their own.
The automatic restart is also configured so that you can program the router on the day and time you want or to restart every day at the same time
The 4 configurations are these. decoder ip 192.168.11.3
1st wireguard on sfp+rj45 + lan port 1 on lan ports 2 and lan 3 they output with public ip, then on wireless they output with public ip and wireguard
Good morning, I wanted to show you some photos of how my network works right now. I have 10 gigabytes of data, I have 2 bananas, a main one connected by wireguard to a server that is more than 2,000 km from my house, and a second banana that is connected by an 8-port 10 GB switch to the first banana.
I have a 10 GB network card in my PC, which is connected to the second banana and the WAN of the first banana enters it through the switch.
The speeds that Banana manages through Cable Land are spectacular, it's a shame that so much speed is lost through Wi-Fi.
so can you help me or guide , how I can use his image so I can add more package on it before install it on current running OpenWRT ..
Because I tried Mr @woziwrt image yesterday ...I couldn't get netowrk through modem (RM551 X75 snapdragon ) because modem on QMI mode and his image doesn't support QMI and there are some modem USB packages were missing ..so I mentioned to him in important package ..
but really his image was more better than Official Snapshot OpenWRT
