@liamhere

On a wireless device, like a iphone or Android, can you see the 5Ghz SSID, and can you connect?

NO....just checked my android p9....nothing showing up

none are now showing up

(Last edited by liamhere on 9 Oct 2016, 17:56)

does this help?

http://tinypic.com/r/2zsxo5t/9

@liamhere

That all looks correct, and the interface is enabled.  Is it the same story for 5Ghz?

Also, do or have you SSH'd into the router yet?

yes now both are unknown now?

i am login in via webpage....SSH is not my thing

wish you could remote access  me...this is doing my head in 

They are both unknown, because there are no wireless association.

Have you rebooted yet?

ill turn it off and back on again....give me a mo

After the system comes back up, copy the Kernel log so we can see what Wifi is doing after the reboot.

after rebooting router still

SSID: 5G | Mode: unknown

SSID: 2G | Mode: unknown

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 4.4.23 (ag33e33@ubuntu) (gcc version 5.4.0 (LEDE GCC 5.4.0 r1811) ) #0 SMP Thu Oct 6 20:58:50 2016
[    0.000000] CPU: ARMv7 Processor [414fc091] revision 1 (ARMv7), cr=10c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine model: Linksys WRT1900ACS
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] On node 0 totalpages: 131072
[    0.000000] free_area_init_node: node 0, pgdat c068bfc0, node_mem_map dfbf9000
[    0.000000]   Normal zone: 1024 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 131072 pages, LIFO batch:31
[    0.000000] PERCPU: Embedded 12 pages/cpu @dfbcf000 s17984 r8192 d22976 u49152
[    0.000000] pcpu-alloc: s17984 r8192 d22976 u49152 alloc=12*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 130048
[    0.000000] Kernel command line: console=ttyS0,115200 root=/dev/mtdblock7 ro rootdelay=1 rootfstype=jffs2 earlyprintk mtdparts=armada-nand:2048K(uboot)ro,256K(u_env),256K(s_env),1m@9m(devinfo),40m@10m(kernel),34m@16m(rootfs),40m@50m(alt_kernel),34m@56m(alt_rootfs),80m@10m(ubifs),-@90m(syscfg)
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Memory: 512408K/524288K available (4719K kernel code, 188K rwdata, 1660K rodata, 264K init, 297K bss, 11880K reserved, 0K cma-reserved, 0K highmem)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
[    0.000000]     vmalloc : 0xe0800000 - 0xff800000   ( 496 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xe0000000   ( 512 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0008000 - 0xc06430fc   (6381 kB)
[    0.000000]       .init : 0xc0644000 - 0xc0686000   ( 264 kB)
[    0.000000]       .data : 0xc0686000 - 0xc06b51e0   ( 189 kB)
[    0.000000]        .bss : 0xc06b51e0 - 0xc06ff838   ( 298 kB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000]     RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] mvebu_mbus: [Firmware Warn]: deprecated mbus-mvebu Device Tree, suspend/resume will not work
[    0.000000] L2C-310 enabling early BRESP for Cortex-A9
[    0.000000] L2C-310 full line of zeros enabled for Cortex-A9
[    0.000000] L2C-310 D prefetch enabled, offset 1 lines
[    0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled
[    0.000000] L2C-310 Coherent cache controller enabled, 16 ways, 1024 kB
[    0.000000] L2C-310 Coherent: CACHE_ID 0x410054c9, AUX_CTRL 0x56070001
[    0.000000] Switching to timer-based delay loop, resolution 40ns
[    0.000003] sched_clock: 32 bits at 25MHz, resolution 40ns, wraps every 85899345900ns
[    0.000009] clocksource: armada_370_xp_clocksource: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 76450417870 ns
[    0.000115] Calibrating delay loop (skipped), value calculated using timer frequency.. 50.00 BogoMIPS (lpj=250000)
[    0.000121] pid_max: default: 32768 minimum: 301
[    0.000160] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.000165] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.000365] CPU: Testing write buffer coherency: ok
[    0.000463] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.000489] Setting up static identity map for 0x8280 - 0x82d8
[    0.000564] mvebu-soc-id: MVEBU SoC ID=0x6820, Rev=0x4
[    0.000638] mvebu-pmsu: Initializing Power Management Service Unit
[    0.001025] Booting CPU 1
[    0.001183] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.001210] Brought up 2 CPUs
[    0.001215] SMP: Total of 2 processors activated (100.00 BogoMIPS).
[    0.001218] CPU: All CPU(s) started in SVC mode.
[    0.003034] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[    0.003104] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.003140] pinctrl core: initialized pinctrl subsystem
[    0.003452] NET: Registered protocol family 16
[    0.003948] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.029939] cpuidle: using governor ladder
[    0.032402] mvebu-pmsu: CPU hotplug support is currently broken on Armada 38x: disabling
[    0.032410] mvebu-pmsu: CPU idle is currently broken on Armada 38x: disabling
[    0.060463] reg-fixed-voltage xhci0-vbus: could not find pctldev for node /soc/internal-regs/pinctrl@18000/xhci0-vbus-pins, deferring probe
[    0.060626] SCSI subsystem initialized
[    0.060706] libata version 3.00 loaded.
[    0.060822] usbcore: registered new interface driver usbfs
[    0.060848] usbcore: registered new interface driver hub
[    0.060870] usbcore: registered new device driver usb
[    0.061412] clocksource: Switched to clocksource armada_370_xp_clocksource
[    0.061840] NET: Registered protocol family 2
[    0.062081] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[    0.062105] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[    0.062137] TCP: Hash tables configured (established 4096 bind 4096)
[    0.062158] UDP hash table entries: 256 (order: 1, 8192 bytes)
[    0.062169] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[    0.062235] NET: Registered protocol family 1
[    0.062255] PCI: CLS 0 bytes, default 64
[    0.063335] futex hash table entries: 512 (order: 3, 32768 bytes)
[    0.063384] Crashlog allocated RAM at address 0x3f00000
[    0.065967] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.065975] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    0.066831] io scheduler noop registered
[    0.066839] io scheduler deadline registered (default)
[    0.067219] armada-38x-pinctrl f1018000.pinctrl: registered pinctrl driver
[    0.067523] irq: Cannot allocate irq_descs @ IRQ44, assuming pre-allocated
[    0.067658] irq: Cannot allocate irq_descs @ IRQ76, assuming pre-allocated
[    0.067950] mvebu-pcie soc:pcie-controller: PCI host bridge to bus 0000:00
[    0.067957] pci_bus 0000:00: root bus resource [io  0x1000-0xfffff]
[    0.067962] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xe7ffffff]
[    0.067967] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.067983] pci 0000:00:01.0: [11ab:6820] type 01 class 0x060400
[    0.068070] pci 0000:00:02.0: [11ab:6820] type 01 class 0x060400
[    0.068150] PCI: bus0: Fast back to back transfers disabled
[    0.068155] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[    0.068162] pci 0000:00:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[    0.068224] pci 0000:01:00.0: [11ab:2a55] type 00 class 0x020000
[    0.068251] pci 0000:01:00.0: reg 0x10: [mem 0x40000000-0x400fffff 64bit pref]
[    0.068262] pci 0000:01:00.0: reg 0x18: [mem 0x40100000-0x401fffff 64bit pref]
[    0.068312] pci 0000:01:00.0: supports D1 D2
[    0.068317] pci 0000:01:00.0: PME# supported from D0 D1 D3hot D3cold
[    0.068383] PCI: bus1: Fast back to back transfers disabled
[    0.068389] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
[    0.068449] pci 0000:02:00.0: [11ab:2a55] type 00 class 0x020000
[    0.068483] pci 0000:02:00.0: reg 0x10: [mem 0x42000000-0x420fffff 64bit pref]
[    0.068496] pci 0000:02:00.0: reg 0x18: [mem 0x42100000-0x421fffff 64bit pref]
[    0.068563] pci 0000:02:00.0: supports D1 D2
[    0.068567] pci 0000:02:00.0: PME# supported from D0 D1 D3hot D3cold
[    0.068632] PCI: bus2: Fast back to back transfers disabled
[    0.068638] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02
[    0.068686] pci 0000:00:01.0: BAR 8: assigned [mem 0xe0000000-0xe01fffff]
[    0.068692] pci 0000:00:02.0: BAR 8: assigned [mem 0xe0200000-0xe03fffff]
[    0.068699] pci 0000:01:00.0: BAR 0: assigned [mem 0xe0000000-0xe00fffff 64bit pref]
[    0.068709] pci 0000:01:00.0: BAR 2: assigned [mem 0xe0100000-0xe01fffff 64bit pref]
[    0.068717] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.068722] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xe01fffff]
[    0.068729] pci 0000:02:00.0: BAR 0: assigned [mem 0xe0200000-0xe02fffff 64bit pref]
[    0.068739] pci 0000:02:00.0: BAR 2: assigned [mem 0xe0300000-0xe03fffff 64bit pref]
[    0.068749] pci 0000:00:02.0: PCI bridge to [bus 02]
[    0.068753] pci 0000:00:02.0:   bridge window [mem 0xe0200000-0xe03fffff]
[    0.068853] mv_xor f1060800.xor: Marvell shared XOR driver
[    0.111850] mv_xor f1060800.xor: Marvell XOR (Descriptor Mode): ( xor cpy intr )
[    0.111936] mv_xor f1060900.xor: Marvell shared XOR driver
[    0.151833] mv_xor f1060900.xor: Marvell XOR (Descriptor Mode): ( xor cpy intr )
[    0.151977] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[    0.152246] console [ttyS0] disabled
[    0.172317] f1012000.serial: ttyS0 at MMIO 0xf1012000 (irq = 21, base_baud = 12500000) is a 16550A
[    0.886902] console [ttyS0] enabled
[    0.892534] loop: module loaded
[    0.895927] ahci-mvebu f10a8000.sata: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl platform mode
[    0.905030] ahci-mvebu f10a8000.sata: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs
[    0.914441] scsi host0: ahci-mvebu
[    0.917999] scsi host1: ahci-mvebu
[    0.921516] ata1: SATA max UDMA/133 mmio [mem 0xf10a8000-0xf10a9fff] port 0x100 irq 41
[    0.929467] ata2: SATA max UDMA/133 mmio [mem 0xf10a8000-0xf10a9fff] port 0x180 irq 41
[    0.937841] pxa3xx-nand f10d0000.flash: This platform can't do DMA on this device
[    0.945605] nand: device found, Manufacturer ID: 0x01, Chip ID: 0xf1
[    0.951991] nand: AMD/Spansion S34ML01G2
[    0.955929] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
[    0.963535] pxa3xx-nand f10d0000.flash: ECC strength 16, ECC step size 2048
[    0.970711] Bad block table found at page 65472, version 0x01
[    0.976816] Bad block table found at page 65408, version 0x01
[    0.982847] 10 ofpart partitions found on MTD device pxa3xx_nand-0
[    0.989052] Creating 10 MTD partitions on "pxa3xx_nand-0":
[    0.994567] 0x000000000000-0x000000200000 : "u-boot"
[    0.999845] 0x000000200000-0x000000240000 : "u_env"
[    1.005014] 0x000000240000-0x000000280000 : "s_env"
[    1.010164] 0x000000900000-0x000000a00000 : "devinfo"
[    1.015509] 0x000000a00000-0x000003200000 : "kernel1"
[    1.020856] 0x000001000000-0x000003200000 : "rootfs1"
[    1.026217] 0x000003200000-0x000005a00000 : "kernel2"
[    1.031594] 0x000003800000-0x000005a00000 : "ubi"
[    1.036606] 0x000005a00000-0x000008000000 : "syscfg"
[    1.041890] 0x000000280000-0x000000900000 : "unused_area"
[    1.047999] libphy: Fixed MDIO Bus: probed
[    1.052273] libphy: orion_mdio_bus: probed
[    1.056523] mvneta_bm f10c8000.bm: Buffer Manager for network controller enabled
[    1.065335] mvneta f1034000.ethernet eth0: Using random mac address 8e:ae:30:5f:5e:8c
[    1.074254] mvneta f1070000.ethernet eth1: Using hardware mac address 14:91:82:36:98:c1
[    1.082350] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.088906] ehci-pci: EHCI PCI platform driver
[    1.093402] ehci-platform: EHCI generic platform driver
[    1.098732] ehci-orion: EHCI orion driver
[    1.102829] orion-ehci f1058000.usb: EHCI Host Controller
[    1.108258] orion-ehci f1058000.usb: new USB bus registered, assigned bus number 1
[    1.115922] orion-ehci f1058000.usb: irq 36, io mem 0xf1058000
[    1.141415] orion-ehci f1058000.usb: USB 2.0 started, EHCI 1.00
[    1.147595] hub 1-0:1.0: USB hub found
[    1.151375] hub 1-0:1.0: 1 port detected
[    1.155688] usbcore: registered new interface driver usb-storage
[    1.161871] armada38x-rtc f10a3800.rtc: rtc core: registered f10a3800.rtc as rtc0
[    1.169512] i2c /dev entries driver
[    1.184527] orion_wdt: Initial timeout 171 sec
[    1.189132] sdhci: Secure Digital Host Controller Interface driver
[    1.195344] sdhci: Copyright(c) Pierre Ossman
[    1.199830] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.208632] marvell-cesa f1090000.crypto: CESA device successfully registered
[    1.216318] NET: Registered protocol family 10
[    1.221224] NET: Registered protocol family 17
[    1.225718] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[    1.238385] 8021q: 802.1Q VLAN Support v1.8
[    1.242657] Registering SWP/SWPB emulation handler
[    1.248226] xhci-hcd f10f8000.usb3: xHCI Host Controller
[    1.253589] xhci-hcd f10f8000.usb3: new USB bus registered, assigned bus number 2
[    1.261199] xhci-hcd f10f8000.usb3: hcc params 0x0a000990 hci version 0x100 quirks 0x00010010
[    1.269795] xhci-hcd f10f8000.usb3: irq 43, io mem 0xf10f8000
[    1.275836] hub 2-0:1.0: USB hub found
[    1.279613] hub 2-0:1.0: 1 port detected
[    1.281428] ata2: SATA link down (SStatus 0 SControl 300)
[    1.281449] ata1: SATA link down (SStatus 0 SControl 300)
[    1.294517] xhci-hcd f10f8000.usb3: xHCI Host Controller
[    1.299854] xhci-hcd f10f8000.usb3: new USB bus registered, assigned bus number 3
[    1.307403] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM.
[    1.315733] hub 3-0:1.0: USB hub found
[    1.319508] hub 3-0:1.0: 1 port detected
[    1.323775] UBI: auto-attach mtd7
[    1.326931] ubi0: attaching mtd7
[    1.420753] ubi0: scanning is finished
[    1.428779] ubi0: attached mtd7 (name "ubi", size 34 MiB)
[    1.434211] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[    1.441113] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[    1.447933] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
[    1.454926] ubi0: good PEBs: 272, bad PEBs: 0, corrupted PEBs: 0
[    1.460956] ubi0: user volume: 2, internal volumes: 1, max. volumes count: 128
[    1.468210] ubi0: max/mean erase counter: 2/0, WL threshold: 4096, image sequence number: 279582635
[    1.477295] ubi0: available PEBs: 0, total reserved PEBs: 272, PEBs reserved for bad PEB handling: 20
[    1.486568] ubi0: background thread "ubi_bgt0d" started, PID 616
[    1.492966] block ubiblock0_0: created from ubi0:0(rootfs)
[    1.498474] ubiblock: device ubiblock0_0 (rootfs) set to be root filesystem
[    1.505664] mvsw61xx 10.mvsw61xx: Found MV88E6176 at f1072004.mdio-mi:10
[    1.512404] mvsw61xx 10.mvsw61xx: Using direct addressing
[    1.527859] armada38x-rtc f10a3800.rtc: setting system clock to 2038-01-19 01:59:59 UTC (2147479199)
[    1.537807] Waiting 1 sec before mounting root device...
[    2.553170] VFS: Mounted root (squashfs filesystem) readonly on device 254:0.
[    2.560469] Freeing unused kernel memory: 264K (c0644000 - c0686000)
[    2.824229] init: Console is alive
[    2.827703] init: - watchdog -
[    3.268933] exFAT: Version 1.2.9
[    3.275769] uhci_hcd: USB Universal Host Controller Interface driver
[    3.283809] init: - preinit -
[    3.447493] random: nonblocking pool is initialized
[    3.721491] mvneta f1070000.ethernet eth1: configuring for fixed link mode
[    3.728769] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[    3.734674] mvneta f1070000.ethernet eth1: Link is Up - 1Gbps/Full - flow control off
[    3.742586] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[    6.810455] mount_root: loading kmods from internal overlay
[    6.917253] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 730
[    6.945498] UBIFS (ubi0:1): recovery needed
[    7.031440] UBIFS (ubi0:1): recovery completed
[    7.035931] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "rootfs_data"
[    7.043804] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[    7.053766] UBIFS (ubi0:1): FS size: 24506368 bytes (23 MiB, 193 LEBs), journal size 1269760 bytes (1 MiB, 10 LEBs)
[    7.064247] UBIFS (ubi0:1): reserved for root: 1157495 bytes (1130 KiB)
[    7.070890] UBIFS (ubi0:1): media format: w4/r0 (latest is w4/r0), UUID 6285D906-487F-40EB-9A13-766806FEDCC4, small LPT model
[    7.082659] block: attempting to load /tmp/ubifs_cfg/upper/etc/config/fstab
[    7.091680] block: extroot: not configured
[    7.133268] UBIFS (ubi0:1): un-mount UBI device 0
[    7.138006] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" stops
[    7.146296] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 733
[    7.193904] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "rootfs_data"
[    7.201778] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[    7.211738] UBIFS (ubi0:1): FS size: 24506368 bytes (23 MiB, 193 LEBs), journal size 1269760 bytes (1 MiB, 10 LEBs)
[    7.222218] UBIFS (ubi0:1): reserved for root: 1157495 bytes (1130 KiB)
[    7.228860] UBIFS (ubi0:1): media format: w4/r0 (latest is w4/r0), UUID 6285D906-487F-40EB-9A13-766806FEDCC4, small LPT model
[    7.296000] block: attempting to load /tmp/ubifs_cfg/upper/etc/config/fstab
[    7.305343] block: extroot: not configured
[    7.352092] mount_root: switching to ubifs overlay
[    7.391730] ubi1: attaching mtd8
[    7.494017] ubi1: scanning is finished
[    7.502155] ubi1: attached mtd8 (name "syscfg", size 38 MiB)
[    7.507837] ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[    7.514749] ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[    7.521568] ubi1: VID header offset: 2048 (aligned 2048), data offset: 4096
[    7.528558] ubi1: good PEBs: 296, bad PEBs: 8, corrupted PEBs: 0
[    7.534590] ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128
[    7.541844] ubi1: max/mean erase counter: 24/14, WL threshold: 4096, image sequence number: 1609568782
[    7.551187] ubi1: available PEBs: 0, total reserved PEBs: 296, PEBs reserved for bad PEB handling: 12
[    7.560453] ubi1: background thread "ubi_bgt1d" started, PID 743
[    7.572160] UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 747
[    7.601842] UBIFS (ubi1:0): recovery needed
[    7.692709] UBIFS (ubi1:0): recovery completed
[    7.697203] UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "syscfg"
[    7.704637] UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[    7.714596] UBIFS (ubi1:0): FS size: 34283520 bytes (32 MiB, 270 LEBs), journal size 1777664 bytes (1 MiB, 14 LEBs)
[    7.725076] UBIFS (ubi1:0): reserved for root: 1619295 bytes (1581 KiB)
[    7.731721] UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID 2B4A5431-A187-431F-927E-572E92B9BA76, small LPT model
[    7.744570] urandom-seed: Seeding with /etc/urandom.seed
[    7.783946] procd: - early -
[    7.786862] procd: - watchdog -
[    8.375569] procd: - ubus -
[    8.429433] procd: - init -
[    8.501001] RPC: Registered named UNIX socket transport module.
[    8.506968] RPC: Registered udp transport module.
[    8.511694] RPC: Registered tcp transport module.
[    8.516415] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    8.524759] ntfs: driver 2.1.32 [Flags: R/O MODULE].
[    8.531633] tun: Universal TUN/TAP device driver, 1.6
[    8.536707] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    8.544207] sit: IPv6 over IPv4 tunneling driver
[    8.554584] ip6_tables: (C) 2000-2006 Netfilter Core Team
[    8.563139] Netfilter messages via NETLINK v0.30.
[    8.568522] ip_set: protocol 6
[    8.579378] cryptodev: driver 1.8 loaded.
[    8.584040] Loading modules backported from Linux version wt-2016-06-20-0-gbc17424
[    8.591675] Backport generated by backports.git backports-20160216-7-g5735958
[    8.607618] <<Marvell 802.11ac Wireless Network Driver version 10.3.0.18-20160823-1>>
[    8.615348] pci 0000:00:01.0: enabling device (0140 -> 0142)
[    8.621275] ieee80211 phy0: priv->iobase0 = e1180000
[    8.621285] ieee80211 phy0: priv->iobase1 = e1300000
[    8.621320] ieee80211 phy0: priv->pcmd_buf = de388000  priv->pphys_cmd_buf = 1e388000
[    8.627758] ieee80211 phy0: fw download start
[    8.744500] ieee80211 phy0: FwSize = 118776 downloaded Size = 118776 curr_iteration 65497
[    9.617409] ieee80211 phy0: fw download complete
[    9.618427] ieee80211 phy0: pcmd = de388000
[    9.636411] ieee80211 phy0: firmware version: 0x702091a
[    9.659685] ieee80211 phy0: firmware region code: 0
[    9.688504] ieee80211 phy0: regdomain: FCC
[    9.688510] ieee80211 phy0: Channel: 36: 0x0 0x0 0xf
[    9.688517] ieee80211 phy0: 12 12 12 12 12 12 12 12 10 10 10 10 f f f f
[    9.688521] ieee80211 phy0: Channel: 40: 0x0 0x0 0xf
[    9.688527] ieee80211 phy0: 16 16 16 16 16 16 16 16 16 16 16 16 f f f f
[    9.688531] ieee80211 phy0: Channel: 44: 0x0 0x0 0xf
[    9.688537] ieee80211 phy0: 16 16 16 16 16 16 16 16 16 16 16 16 f f f f
[    9.688541] ieee80211 phy0: Channel: 48: 0x0 0x0 0xf
[    9.688547] ieee80211 phy0: 16 16 16 16 16 16 16 16 16 16 16 16 f f f f
[    9.688551] ieee80211 phy0: Channel: 52: 0x0 0x0 0xf
[    9.688557] ieee80211 phy0: 11 11 11 11 10 10 10 10 12 12 12 12 10 10 10 10
[    9.688561] ieee80211 phy0: Channel: 56: 0x0 0x0 0xf
[    9.688567] ieee80211 phy0: 11 11 11 11 10 10 10 10 12 12 12 12 10 10 10 10
[    9.688571] ieee80211 phy0: Channel: 60: 0x0 0x0 0xf
[    9.688577] ieee80211 phy0: 11 11 11 11 10 10 10 10 12 12 12 12 10 10 10 10
[    9.688581] ieee80211 phy0: Channel: 64: 0x0 0x0 0xf
[    9.688587] ieee80211 phy0: 11 11 11 11 10 10 10 10 12 12 12 12 10 10 10 10
[    9.688591] ieee80211 phy0: Channel: 100: 0x0 0x0 0xf
[    9.688597] ieee80211 phy0: 10 10 10 10 11 11 11 11 12 12 12 12 10 10 10 10
[    9.688601] ieee80211 phy0: Channel: 104: 0x0 0x0 0xf
[    9.688607] ieee80211 phy0: 11 11 11 11 10 10 10 10 12 12 12 12 10 10 10 10
[    9.688611] ieee80211 phy0: Channel: 108: 0x0 0x0 0xf
[    9.688617] ieee80211 phy0: 11 11 11 11 10 10 10 10 11 11 11 11 10 10 10 10
[    9.688621] ieee80211 phy0: Channel: 112: 0x0 0x0 0xf
[    9.688627] ieee80211 phy0: 11 11 11 11 10 10 10 10 11 11 11 11 10 10 10 10
[    9.688631] ieee80211 phy0: Channel: 116: 0x0 0x0 0xf
[    9.688637] ieee80211 phy0: 11 11 11 11 10 10 10 10 11 11 11 11 10 10 10 10
[    9.688641] ieee80211 phy0: Channel: 120: 0x0 0x0 0xf
[    9.688647] ieee80211 phy0: 11 11 11 11 10 10 10 10 11 11 11 11 10 10 10 10
[    9.688651] ieee80211 phy0: Channel: 124: 0x0 0x0 0xf
[    9.688657] ieee80211 phy0: 11 11 11 11 10 10 10 10 11 11 11 11 10 10 10 10
[    9.688660] ieee80211 phy0: Channel: 128: 0x0 0x0 0xf
[    9.688667] ieee80211 phy0: 11 11 11 11 10 10 10 10 11 11 11 11 10 10 10 10
[    9.688670] ieee80211 phy0: Channel: 132: 0x0 0x0 0xf
[    9.688676] ieee80211 phy0: 11 11 11 11 10 10 10 10 11 11 11 11 10 10 10 10
[    9.688680] ieee80211 phy0: Channel: 136: 0x0 0x0 0xf
[    9.688686] ieee80211 phy0: 11 11 11 11 10 10 10 10 11 11 11 11 10 10 10 10
[    9.688690] ieee80211 phy0: Channel: 140: 0x0 0x0 0xf
[    9.688696] ieee80211 phy0: 11 11 11 11 10 10 10 10 11 11 11 11 10 10 10 10
[    9.688700] ieee80211 phy0: Channel: 149: 0x0 0x0 0xf
[    9.688706] ieee80211 phy0: 16 16 16 16 16 16 16 16 15 15 15 15 15 15 15 15
[    9.688710] ieee80211 phy0: Channel: 153: 0x0 0x0 0xf
[    9.688716] ieee80211 phy0: 16 16 16 16 15 15 15 15 15 15 15 15 15 15 15 15
[    9.688720] ieee80211 phy0: Channel: 157: 0x0 0x0 0xf
[    9.688726] ieee80211 phy0: 16 16 16 16 15 15 15 15 15 15 15 15 15 15 15 15
[    9.688730] ieee80211 phy0: Channel: 161: 0x0 0x0 0xf
[    9.688736] ieee80211 phy0: 16 16 16 16 15 15 15 15 15 15 15 15 15 15 15 15
[    9.688740] ieee80211 phy0: Channel: 165: 0x0 0x0 0xf
[    9.688746] ieee80211 phy0: 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15
[    9.689398] ieee80211 phy0: 2G disabled, 5G enabled
[    9.694323] ieee80211 phy0: 4 TX antennas, 4 RX antennas
[    9.699745] pci 0000:00:02.0: enabling device (0140 -> 0142)
[    9.705495] ieee80211 phy1: priv->iobase0 = e1480000
[    9.705509] ieee80211 phy1: priv->iobase1 = e1600000
[    9.705543] ieee80211 phy1: priv->pcmd_buf = dd408000  priv->pphys_cmd_buf = 1d408000
[    9.711425] ieee80211 phy1: fw download start
[    9.829061] ieee80211 phy1: FwSize = 118776 downloaded Size = 118776 curr_iteration 65511
[   10.691406] ieee80211 phy1: fw download complete
[   10.692424] ieee80211 phy1: pcmd = dd408000
[   10.710429] ieee80211 phy1: firmware version: 0x702091a
[   10.733707] ieee80211 phy1: firmware region code: 0
[   10.760504] ieee80211 phy1: regdomain: FCC
[   10.760510] ieee80211 phy1: Channel: 1: 0x0 0x0 0xf
[   10.760516] ieee80211 phy1: 17 10 10 10 f f f f e e e e 0 0 0 0
[   10.760520] ieee80211 phy1: Channel: 2: 0x0 0x0 0xf
[   10.760527] ieee80211 phy1: 18 16 16 16 16 16 16 14 11 11 11 11 0 0 0 0
[   10.760530] ieee80211 phy1: Channel: 3: 0x0 0x0 0xf
[   10.760537] ieee80211 phy1: 18 16 16 16 16 16 16 14 11 11 11 11 0 0 0 0
[   10.760540] ieee80211 phy1: Channel: 4: 0x0 0x0 0xf
[   10.760547] ieee80211 phy1: 18 16 16 16 16 16 16 14 11 11 11 11 0 0 0 0
[   10.760550] ieee80211 phy1: Channel: 5: 0x0 0x0 0xf
[   10.760556] ieee80211 phy1: 18 16 16 16 16 16 16 14 11 11 11 11 0 0 0 0
[   10.760560] ieee80211 phy1: Channel: 6: 0x0 0x0 0xf
[   10.760566] ieee80211 phy1: 18 16 16 16 16 16 16 14 11 11 11 11 0 0 0 0
[   10.760570] ieee80211 phy1: Channel: 7: 0x0 0x0 0xf
[   10.760577] ieee80211 phy1: 18 16 16 16 16 16 16 14 11 11 11 11 0 0 0 0
[   10.760580] ieee80211 phy1: Channel: 8: 0x0 0x0 0xf
[   10.760587] ieee80211 phy1: 18 16 16 16 16 16 16 14 11 11 11 11 0 0 0 0
[   10.760590] ieee80211 phy1: Channel: 9: 0x0 0x0 0xf
[   10.760597] ieee80211 phy1: 18 16 16 16 16 16 16 14 11 11 11 11 0 0 0 0
[   10.760600] ieee80211 phy1: Channel: 10: 0x0 0x0 0xf
[   10.760606] ieee80211 phy1: 18 16 16 16 16 16 16 14 11 11 11 11 0 0 0 0
[   10.760610] ieee80211 phy1: Channel: 11: 0x0 0x0 0xf
[   10.760616] ieee80211 phy1: 17 12 12 12 13 13 13 13 f f f f 0 0 0 0
[   10.761247] ieee80211 phy1: 2G enabled, 5G disabled
[   10.766175] ieee80211 phy1: 4 TX antennas, 4 RX antennas
[   10.773951] u32 classifier
[   10.776673]     input device check on
[   10.780350]     Actions configured
[   10.784221] Mirror/redirect action on
[   10.789801] nf_conntrack version 0.5.0 (8010 buckets, 32040 max)
[   10.803348] ip_tables: (C) 2000-2006 Netfilter Core Team
[   10.912883] usbcore: registered new interface driver ums-alauda
[   10.919090] usbcore: registered new interface driver ums-cypress
[   10.925409] usbcore: registered new interface driver ums-datafab
[   10.931702] usbcore: registered new interface driver ums-freecom
[   10.938000] usbcore: registered new interface driver ums-isd200
[   10.944220] usbcore: registered new interface driver ums-jumpshot
[   10.950589] usbcore: registered new interface driver ums-karma
[   10.956763] usbcore: registered new interface driver ums-sddr09
[   10.963002] usbcore: registered new interface driver ums-sddr55
[   10.969236] usbcore: registered new interface driver ums-usbat
[   10.982593] xt_time: kernel timezone is -0000
[   10.989816] PPP generic driver version 2.4.2
[   10.994612] NET: Registered protocol family 24
[   13.180149] mvneta f1070000.ethernet eth1: configuring for fixed link mode
[   13.187201] mvneta f1070000.ethernet eth1: Link is Up - 1Gbps/Full - flow control off
[   13.190719] device eth1 entered promiscuous mode
[   13.192910] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
[   13.205805] mvneta f1034000.ethernet eth0: configuring for fixed link mode
[   13.213158] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   13.219048] br-lan: port 1(eth1) entered forwarding state
[   13.219315] mvneta f1034000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off
[   13.232373] br-lan: port 1(eth1) entered forwarding state
[   13.237898] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   13.296775] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
[   13.570163] ieee80211 phy1: regdomain: ETSI
[   13.574406] ieee80211 phy1: Channel: 1: 0x0 0x0 0xf
[   13.579320] ieee80211 phy1: a a a a a a a a a a a a 0 0 0 0
[   13.585093] ieee80211 phy1: Channel: 2: 0x0 0x0 0xf
[   13.589995] ieee80211 phy1: a a a a a a a a a a a a 0 0 0 0
[   13.595767] ieee80211 phy1: Channel: 3: 0x0 0x0 0xf
[   13.600669] ieee80211 phy1: a a a a a a a a a a a a 0 0 0 0
[   13.606431] ieee80211 phy1: Channel: 4: 0x0 0x0 0xf
[   13.611331] ieee80211 phy1: a a a a a a a a a a a a 0 0 0 0
[   13.617090] ieee80211 phy1: Channel: 5: 0x0 0x0 0xf
[   13.621994] ieee80211 phy1: a a a a a a a a a a a a 0 0 0 0
[   13.627749] ieee80211 phy1: Channel: 6: 0x0 0x0 0xf
[   13.632653] ieee80211 phy1: a a a a a a a a a a a a 0 0 0 0
[   13.638409] ieee80211 phy1: Channel: 7: 0x0 0x0 0xf
[   13.643313] ieee80211 phy1: a a a a a a a a a a a a 0 0 0 0
[   13.649068] ieee80211 phy1: Channel: 8: 0x0 0x0 0xf
[   13.653972] ieee80211 phy1: a a a a a a a a a a a a 0 0 0 0
[   13.659727] ieee80211 phy1: Channel: 9: 0x0 0x0 0xf
[   13.664632] ieee80211 phy1: a a a a a a a a a a a a 0 0 0 0
[   13.670387] ieee80211 phy1: Channel: 10: 0x0 0x0 0xf
[   13.675379] ieee80211 phy1: a a a a a a a a a a a a 0 0 0 0
[   13.681134] ieee80211 phy1: Channel: 11: 0x0 0x0 0xf
[   13.686126] ieee80211 phy1: a a a a a a a a a a a a 0 0 0 0
[   13.691885] ieee80211 phy1: Channel: 12: 0x0 0x0 0xf
[   13.696876] ieee80211 phy1: a a a a a a a a a a a a 0 0 0 0
[   13.702564] ieee80211 phy1: Channel: 13: 0x0 0x0 0xf
[   13.707624] ieee80211 phy1: a a a a a a a a a a a a 0 0 0 0
[   13.713326] ieee80211 phy0: regdomain: ETSI
[   13.717600] ieee80211 phy0: Channel: 36: 0x0 0x0 0xf
[   13.722591] ieee80211 phy0: d d d d d d d d e e e e e e e e
[   13.728346] ieee80211 phy0: Channel: 40: 0x0 0x0 0xf
[   13.733337] ieee80211 phy0: d d d d d d d d e e e e e e e e
[   13.739093] ieee80211 phy0: Channel: 44: 0x0 0x0 0xf
[   13.744084] ieee80211 phy0: d d d d d d d d e e e e e e e e
[   13.749838] ieee80211 phy0: Channel: 48: 0x0 0x0 0xf
[   13.754830] ieee80211 phy0: d d d d d d d d e e e e e e e e
[   13.760585] ieee80211 phy0: Channel: 52: 0x0 0x0 0xf
[   13.765576] ieee80211 phy0: d d d d d d d d e e e e e e e e
[   13.771331] ieee80211 phy0: Channel: 56: 0x0 0x0 0xf
[   13.776323] ieee80211 phy0: d d d d d d d d e e e e e e e e
[   13.782083] ieee80211 phy0: Channel: 60: 0x0 0x0 0xf
[   13.787070] ieee80211 phy0: d d d d d d d d e e e e e e e e
[   13.792831] ieee80211 phy0: Channel: 64: 0x0 0x0 0xf
[   13.797822] ieee80211 phy0: d d d d d d d d e e e e e e e e
[   13.803585] ieee80211 phy0: Channel: 100: 0x0 0x0 0xf
[   13.808659] ieee80211 phy0: d d d d d d d d e e e e e e e e
[   13.814420] ieee80211 phy0: Channel: 104: 0x0 0x0 0xf
[   13.819493] ieee80211 phy0: d d d d d d d d e e e e e e e e
[   13.825253] ieee80211 phy0: Channel: 108: 0x0 0x0 0xf
[   13.830326] ieee80211 phy0: d d d d d d d d e e e e e e e e
[   13.836085] ieee80211 phy0: Channel: 112: 0x0 0x0 0xf
[   13.841160] ieee80211 phy0: d d d d d d d d e e e e e e e e
[   13.846920] ieee80211 phy0: Channel: 116: 0x0 0x0 0xf
[   13.851997] ieee80211 phy0: d d d d d d d d e e e e e e e e
[   13.857754] ieee80211 phy0: Channel: 120: 0x0 0x0 0xf
[   13.862833] ieee80211 phy0: d d d d d d d d e e e e e e e e
[   13.868590] ieee80211 phy0: Channel: 124: 0x0 0x0 0xf
[   13.873668] ieee80211 phy0: d d d d d d d d e e e e e e e e
[   13.879424] ieee80211 phy0: Channel: 128: 0x0 0x0 0xf
[   13.884503] ieee80211 phy0: d d d d d d d d e e e e e e e e
[   13.890257] ieee80211 phy0: Channel: 132: 0x0 0x0 0xf
[   13.895336] ieee80211 phy0: d d d d d d d d e e e e e e e e
[   13.901091] ieee80211 phy0: Channel: 136: 0x0 0x0 0xf
[   13.906171] ieee80211 phy0: d d d d d d d d e e e e e e e e
[   13.911858] ieee80211 phy0: Channel: 140: 0x0 0x0 0xf
[   13.916935] ieee80211 phy0: d d d d d d d d e e e e e e e e
[   13.922632] ieee80211 phy0: Channel: 149: 0x0 0x0 0xf
[   13.927706] ieee80211 phy0: d d d d d d d d e e e e e e e e
[   15.231424] br-lan: port 1(eth1) entered forwarding state

hope that helps

Both wireless are discovered but never go into the forwarding state.

Without SSH it's hard to see what's going on in the background.. 

Well, have you tried manually disabling both wireless and saving the configuration... Then reboot and enable both interfaces and save the configuration.

Hi at davidc502 if i install your build is there a way for me to install the luci adblock plugin?

@tapper,

I'm testing a new build with new packages that will include adblock.  Everything looks good so far, so I should be posting it up on the server later today.

did that nothing changed...just flashed back to stock to check the radio is working all all ok on stock 

It's a lede configuration issue on this build. It's hard to say what needs to be changed.

Nice one mate just give me a shout when it's up and i will give it a test run!

dam....thanks for you help on this issue....back to stock for me....for now 

Nice one mate just give me a shout when it's up and i will give it a test run!

@liamhere,This seems to be happening frequently on new installs as of late, mostly shelby devices it seems. Doing this followed by bouncing your wifi, wifi down; wifi up, seems to be enough to get things working. Sometimes just bouncing wifi. From ssh though.

I specially miss Transmission and Adblock

Thanks!!

Was recommended, but he/she had already bounced back to stock before it could be executed.

Hi @davidc502 when you put the new build up can you post a link pleas to make sure i get the rite file thanks

The new build is failing due to curl.  Looks like something that will take time to sort out.

curlopt-constants.c: In function 'constant':
curlopt-constants.c:19:58: warning: 'return' with no value, in function returning non-void
             if (strEQ(name, "DID_MEMORY_FUNC_TYPEDEFS")) return CURL_DID_MEMORY_FUNC_TYPEDEFS;
                                                          ^
curlopt-constants.c:128:49: error: 'CURL_STRICTER' undeclared (first use in this function)
             if (strEQ(name, "STRICTER")) return CURL_STRICTER;
                                                 ^
curlopt-constants.c:128:49: note: each undeclared identifier is reported only once for each function it appears in
Makefile:357: recipe for target 'Curl.o' failed
make[4]: *** [Curl.o] Error 1

Hi davidc502

Thanks for your great work on the firmware, have been running your LEDE builds for quite some time now on my 1900ACS V1 and I never had issues. Only with your last build from 9. October I lost 5GHz wireless sometime during the night (country CH, channel 36), the 2,4GHz (Channel 11) continued to work. 5GHz WLAN LED was still lighting but no client was connecting. Disabling and enabling wireless & reboot didn't help. I didn't have time to play with the settings or do a reset with clean reconfiguring so I went back to last build from 6. October with 4.4.23 kernel, 5GHz running again.

For upgrade I always reset the router, then boot into stock partition, upgrade firmware and do another reset and than import the settings from backup.

(Last edited by p4p4 on 10 Oct 2016, 07:10)