Hi, My first question so please be kind, I have a zbt wd323 4G LTE router, it is an industrial bonding router , with the default software the router would power cycle once or twice a day which meant we lost internet access at those times, to "solve" this issue I upgraded the software through the Bleed Web interface with this Powered by LuCI openwrt-19.07 branch (git-20.247.75781-0d0ab01) / OpenWrt 19.07.4 r11208-ce6496d796
Now the router power cycles every 30 seconds so its unusable
You were already told (it's usually poor taste in forums to ignore the reply; or even make another thread - simply because you don't know what the poster meant):
It's nothing Linux-specific as it's not software. It's a hardware feature on circuit boards. Hope this helps. Also, feel free to ask if you don't know.
You cannot use a text editor to alter a binary file (and in general circumstances, a binary file cannot be edited, even with the appropriate software). You'd have to build the working solution into a custom firmware and/or have a big fix completed - so it makes it to the official firmware.