-> stefs
when you have internet running:
opkg update
opkg install ( the content of the list )
Sorry guy, for me it was only this problem...
Then you have to use the hopefully left the original kernel untouched in partition kernel1 for recovery with a USB stick as described in the wiki page.
If this also doesn't work, you have to solder a serial header and use the serial console of the booloader, to boot OpenWRT initram image from tftp and reflash your device.
To go to putty and log in to router and then do this?
Just type this and type all you say? in once or time from time?
Someone for tips for me?
? 
... 
What is your question?
Reading the wiki is probably the fastest way - there is a lot of information out there..
Searching here will also yield a lot of information:
Thanks but i still dont understand.
When i go to smbd -V i see that i have version 3.6.25
What i should do next?
When i go to /etc/config/samba i get permission denied
When i type opkg list-installed | grep usb i get:
kmod-usb-core - 4.14.151-1
kmod-usb-storage - 4.14.151-1
kmod-usb3 - 4.14.151-1
I do this, and still nothing:
https://openwrt.org/docs/guide-user/storage/usb-drives-quickstart
?
As this is a generic question, you should open a own thread for you problem...
1 Like
If i dont get help here, i think i dont on new theme also, this is the reason why i dont open new theme.
Hello guys,
After installing version 19.07.0 via sysupgrade, I'm trying to install Luci but I got this error:
root@OpenWrt:~# opkg install luci
Installing luci (git-20.010.60094-335692a-1) to root...
Downloading http://downloads.openwrt.org/releases/19.07.0/packages/mipsel_24kc/luci/luci_git-20.010.60094-335692a-1_all.ipk
Collected errors:
* satisfy_dependencies_for: Cannot satisfy the following dependencies for luci:
* libc
* kernel (= 4.14.162-1-2e88863ccdd594fb8e842df3c25842ee)
* libc
* opkg_install_cmd: Cannot install package luci.
Do you know how to fix it ?
Thanks
Luci should already be installed on a stable release.
1 Like
FYI - I have create a new topic for 19.07.x issues with Xiaomi Wifi Router 3G.
Please use the new topic for questions specific to 19.07.x
3 Likes
I will ask my question again, maybe my english is too bad so u dont understand me.
I install 18.06 on my Xiaomi Router 3g. And i want to get Samba 3 for my usb.
But samba not work.
I install samba36-client, samba36-hotplug, samba36-net, samba36-server.
But when i put my usb and go to Mount Point, nothing happens.
I format USB from NTFS to EXFAT, but its the same.
Help?
This topic was automatically closed 20 days after the last reply. New replies are no longer allowed.