Hey guys. I am trying to install OpenWRT but when running following command: mtd write openwrt-18.06.2-ramips-mt7621-mir3g-squashfs-kernel1.bin kernel1
I get error: Couldn't open image file: openwrt-18.06.2-ramips-mt7621-mir3g-squashfs-kernel1.bin!
What may be a problem?
Welcome. Please try to avoid hijacking or reusing existing topics if they are not about the exact issue you have (or a strongly related one), particularly when it's a long topic that had too many posts already.
You are using the wrong file name. Your file is 18.06.04 while your command looks for 18.06.02.
If your problem isn't solved, please start a new topic.
I received my Router Today, but the one I get have no USB Port.
Is this the Old Version?
I had a Problem with flashing the Developer Software, when I upload the firmware I get "Verification failed" and after a few trys sometimes the 100% Upload "stay there for 5 Minutes" and then I get a error "Upgrade Failed System Error or root partition full"
Anyone has an idea what I can do? I reset the router a few times but every time the same. The Softwareversion on the router is 2.28.8
Your version without USB is the V2 of R3G and is currently not supported by OpenWRT.
There is a patch on the mailing list, but flashing is much harder and requires a hw programmer as of actual state...
That's a real PITA. I have an "old" 3G, which is not so simple to flash, either, but its worth because of all the great aspects of the 3G: Powerful, cool design, good price.
And now XIAOMI makes it even more difficult to flash the "new" 3G.
One could imagine, there is some type of "Trojan" in the org firmware, XIAOMI (?) has to keep alive ...
With the last version i cannot sysupgrade error is : **The uploaded image file does not contain a supported format. Make sure that you choose the generic image format for your platform. Select 'Force upgrade' to flash the image even if the image format check fails. Use only if you are sure that the firmware is correct and meant for your device!**
Has anyone tried 19.07 RC1 yet? Any major issues?
Also, I saw that the sysupgrade is in a .bin format so I can't go from 18.06 to 19.07 directly... Luci doesn't accept that format... Do I need to flash like the first time? With mtd kernel1 and rootfs ?