Wavlink Quantum DAX - WAN port not working

tjfigueiredo · February 17, 2023, 11:20am

I installed Openwrt on a Wavlink Quantum DAX (same as Phicomm K3) following some posts found in this forum (due to the lack of documentation in the device page) and everything seems to be working ok except for the WAN port that doesn't work at all...

Information about the WAN port is logged in dmesg and syslog, but there's no connection to the said port and when I connect a cable nothing is logged in system logs and the connection lights in the switch won't even turn on (don't know if this is a problem in the physical port as I installed Openwrt directly without testing the original firmware). The network config is the default one, using DHCP and you can find below the server logs.

To bypass this problem I reconfigured a LAN port to act as WAN and it seems to be working as expected, but it means that I'll have one less port available.

Also, I leave here the steps I made to install Openwrt in this router, as it can be useful to someone who's planning to do the same (I want to congrat people on this forum for the incredible help provided)

Thanks in advance!

tjfigueiredo · February 17, 2023, 11:21am

dmesg

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 5.10.161 (builder@buildhost) (arm-openwrt-linux-muslgnueabi-gcc (OpenWrt GCC 11.2.0 r20028-43d71ad93e) 11.2.0, GNU ld (GNU Binutils) 2.37) #0 SMP Tue Jan 3 00:24:21 2023
[    0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=10c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] OF: fdt: Machine model: Phicomm K3
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] Hit pending asynchronous external abort (FSR=0x00001c06) during first unmask, this is most likely caused by a firmware/bootloader bug.
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x0000000000000000-0x0000000007ffffff]
[    0.000000]   HighMem  [mem 0x0000000008000000-0x000000009fffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000000000-0x0000000007ffffff]
[    0.000000]   node   0: [mem 0x0000000088000000-0x000000009fffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000009fffffff]
[    0.000000] On node 0 totalpages: 131072
[    0.000000]   Normal zone: 288 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 32768 pages, LIFO batch:7
[    0.000000]   HighMem zone: 98304 pages, LIFO batch:31
[    0.000000] percpu: Embedded 14 pages/cpu s27596 r8192 d21556 u57344
[    0.000000] pcpu-alloc: s27596 r8192 d21556 u57344 alloc=14*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 130784
[    0.000000] Kernel command line: 
[    0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes, linear)
[    0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] Memory: 509296K/524288K available (6212K kernel code, 570K rwdata, 816K rodata, 1024K init, 295K bss, 14992K reserved, 0K cma-reserved, 393216K highmem)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] rcu: Hierarchical RCU implementation.
[    0.000000] 	Tracing variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[    0.000000] L2C: DT/platform modifies aux control register: 0x0a130000 -> 0x3a530000
[    0.000000] L2C-310 enabling early BRESP for Cortex-A9
[    0.000000] L2C-310 full line of zeros enabled for Cortex-A9
[    0.000000] L2C-310 ID prefetch enabled, offset 1 lines
[    0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled
[    0.000000] L2C-310 cache controller enabled, 16 ways, 256 kB
[    0.000000] L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x7e530001
[    0.000010] sched_clock: 64 bits at 700MHz, resolution 1ns, wraps every 4398046511103ns
[    0.000024] clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0xa17102bcf3, max_idle_ns: 440795224838 ns
[    0.000043] Switching to timer-based delay loop, resolution 1ns
[    0.000220] Calibrating delay loop (skipped), value calculated using timer frequency.. 1400.00 BogoMIPS (lpj=7000000)
[    0.000231] pid_max: default: 32768 minimum: 301
[    0.000315] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.000324] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.000867] CPU: Testing write buffer coherency: ok
[    0.000901] CPU0: Spectre v2: using BPIALL workaround
[    0.001111] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.001586] Setting up static identity map for 0x100000 - 0x10003c
[    0.001702] rcu: Hierarchical SRCU implementation.
[    0.001828] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build
[    0.001981] smp: Bringing up secondary CPUs ...
[    0.002579] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.002586] CPU1: Spectre v2: using BPIALL workaround
[    0.002679] smp: Brought up 1 node, 2 CPUs
[    0.002688] SMP: Total of 2 processors activated (2800.00 BogoMIPS).
[    0.002693] CPU: WARNING: CPU(s) started in wrong/inconsistent modes (primary CPU mode 0x13)
[    0.002697] CPU: This may indicate a broken bootloader or firmware.
[    0.004436] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.004457] futex hash table entries: 512 (order: 3, 32768 bytes, linear)
[    0.004577] pinctrl core: initialized pinctrl subsystem
[    0.005246] NET: Registered protocol family 16
[    0.005915] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.006634] thermal_sys: Registered thermal governor 'step_wise'
[    0.026617] clocksource: Switched to clocksource arm_global_timer
[    0.027440] NET: Registered protocol family 2
[    0.027599] IP idents hash table entries: 2048 (order: 2, 16384 bytes, linear)
[    0.028340] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
[    0.028407] TCP established hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.028424] TCP bind hash table entries: 1024 (order: 1, 8192 bytes, linear)
[    0.028440] TCP: Hash tables configured (established 1024 bind 1024)
[    0.028559] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
[    0.028608] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
[    0.028875] NET: Registered protocol family 1
[    0.028914] PCI: CLS 0 bytes, default 64
[    0.030738] workingset: timestamp_bits=14 max_order=17 bucket_order=3
[    0.032766] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.032781] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    0.033429] bounce: pool size: 64 pages
[    0.033494] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.034676] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
[    0.035639] printk: console [ttyS0] disabled
[    0.035693] 18000300.serial: ttyS0 at MMIO 0x18000300 (irq = 26, base_baud = 7812500) is a 16550
[    0.552953] printk: console [ttyS0] enabled
[    0.557519] 18000400.serial: ttyS1 at MMIO 0x18000400 (irq = 26, base_baud = 7812500) is a 16550
[    0.567530] bcm2835-rng 18004000.rng: hwrng registered
[    0.657250] nand: device found, Manufacturer ID: 0xec, Chip ID: 0xf1
[    0.663625] nand: Samsung NAND 128MiB 3,3V 8-bit
[    0.668273] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
[    0.675875] iproc_nand 18028000.nand-controller: detected 128MiB total, 128KiB blocks, 2KiB pages, 16B OOB, 8-bit, BCH-4
[    0.686806] Scanning device for bad blocks
[    0.991291] Bad eraseblock 515 at 0x000004060000
[    1.241883] random: crng init done
[    1.291387] Bad eraseblock 1023 at 0x000007fe0000
[    1.296384] 4 fixed-partitions partitions found on MTD device brcmnand.0
[    1.303416] Creating 4 MTD partitions on "brcmnand.0":
[    1.308607] 0x000000000000-0x000000080000 : "boot"
[    1.313904] 0x000000080000-0x000000180000 : "nvram"
[    1.319303] 0x000000180000-0x000000400000 : "phicomm"
[    1.324842] 0x000000400000-0x000008000000 : "firmware"
[    1.331405] 2 trx partitions found on MTD device firmware
[    1.336860] Creating 2 MTD partitions on "firmware":
[    1.341844] 0x00000000001c-0x000000400000 : "linux"
[    1.346748] mtd: partition "linux" doesn't start on an erase/write block boundary -- force read-only
[    1.356436] 0x000000400000-0x000007c00000 : "ubi"
[    1.363413] bcm_iproc 18029200.spi: using bspi-mspi mode
[    1.370726] iproc-mdio 18003000.mdio: Broadcom iProc MDIO bus registered
[    1.378916] b53-srab-switch 18007000.ethernet-switch: found switch: BCM53012, rev 0
[    1.386794] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded
[    1.392869] bcma-host-soc 18000000.axi: bus0: Found chip with id 53030, rev 0x00 and package 0x00
[    1.401877] bcma-host-soc 18000000.axi: bus0: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x2A, class 0x0)
[    1.412476] bcma-host-soc 18000000.axi: bus0: bcma_of_get_irq() failed with rc=-22
[    1.412486] bcma-host-soc 18000000.axi: bus0: Core 1 found: Chipcommon B (manuf 0x4BF, id 0x50B, rev 0x05, class 0x0)
[    1.423217] bcma-host-soc 18000000.axi: bus0: bcma_of_get_irq() failed with rc=-22
[    1.423224] bcma-host-soc 18000000.axi: bus0: Core 2 found: DMA (manuf 0x4BF, id 0x502, rev 0x04, class 0x0)
[    1.433205] bcma-host-soc 18000000.axi: bus0: Core 3 found: GBit MAC (manuf 0x4BF, id 0x82D, rev 0x07, class 0x0)
[    1.443610] bcma-host-soc 18000000.axi: bus0: Core 4 found: GBit MAC (manuf 0x4BF, id 0x82D, rev 0x07, class 0x0)
[    1.454018] bcma-host-soc 18000000.axi: bus0: Core 5 found: GBit MAC (manuf 0x4BF, id 0x82D, rev 0x07, class 0x0)
[    1.464427] bcma-host-soc 18000000.axi: bus0: Core 6 found: GBit MAC (manuf 0x4BF, id 0x82D, rev 0x07, class 0x0)
[    1.474785] bcma-host-soc 18000000.axi: bus0: Core 7 found: PCIe Gen 2 (manuf 0x4BF, id 0x501, rev 0x07, class 0x0)
[    1.485320] bcma-host-soc 18000000.axi: bus0: Core 8 found: PCIe Gen 2 (manuf 0x4BF, id 0x501, rev 0x07, class 0x0)
[    1.495861] bcma-host-soc 18000000.axi: bus0: Core 9 found: PCIe Gen 2 (manuf 0x4BF, id 0x501, rev 0x07, class 0x0)
[    1.506413] bcma-host-soc 18000000.axi: bus0: bcma_of_get_irq() failed with rc=-22
[    1.506421] bcma-host-soc 18000000.axi: bus0: Core 10 found: ARM Cortex A9 core (ihost) (manuf 0x4BF, id 0x510, rev 0x07, class 0x0)
[    1.518445] bcma-host-soc 18000000.axi: bus0: Core 11 found: USB 2.0 (manuf 0x4BF, id 0x504, rev 0x07, class 0x0)
[    1.528837] bcma-host-soc 18000000.axi: bus0: Core 12 found: USB 3.0 (manuf 0x4BF, id 0x505, rev 0x07, class 0x0)
[    1.539226] bcma-host-soc 18000000.axi: bus0: bcma_of_get_irq() failed with rc=-22
[    1.539233] bcma-host-soc 18000000.axi: bus0: Core 13 found: SDIO3 (manuf 0x4BF, id 0x503, rev 0x01, class 0x0)
[    1.549436] bcma-host-soc 18000000.axi: bus0: bcma_of_get_irq() failed with rc=-22
[    1.549443] bcma-host-soc 18000000.axi: bus0: Core 14 found: I2S (manuf 0x4BF, id 0x834, rev 0x03, class 0x0)
[    1.559468] bcma-host-soc 18000000.axi: bus0: bcma_of_get_irq() failed with rc=-22
[    1.559475] bcma-host-soc 18000000.axi: bus0: Core 15 found: ARM Cortex A9 JTAG (manuf 0x4BF, id 0x506, rev 0x01, class 0x0)
[    1.570822] bcma-host-soc 18000000.axi: bus0: bcma_of_get_irq() failed with rc=-22
[    1.570829] bcma-host-soc 18000000.axi: bus0: Core 16 found: Denali DDR2/DDR3 memory controller (manuf 0x4BF, id 0x507, rev 0x01, class 0x0)
[    1.583557] bcma-host-soc 18000000.axi: bus0: bcma_of_get_irq() failed with rc=-22
[    1.583564] bcma-host-soc 18000000.axi: bus0: Core 17 found: ROM (manuf 0x4BF, id 0x508, rev 0x08, class 0x0)
[    1.593619] bcma-host-soc 18000000.axi: bus0: Core 18 found: NAND flash controller (manuf 0x4BF, id 0x509, rev 0x01, class 0x0)
[    1.605219] bcma-host-soc 18000000.axi: bus0: bcma_of_get_irq() failed with rc=-22
[    1.605226] bcma-host-soc 18000000.axi: bus0: Core 19 found: SPI flash controller (manuf 0x4BF, id 0x50A, rev 0x01, class 0x0)
[    1.616668] bcma-host-soc 18000000.axi: bus0: Flash type not supported
[    1.659855] bcma-host-soc 18000000.axi: bus0: Using SPROM revision 8 provided by platform.
[    1.660131] bgmac_bcma bcma0:3: Found PHY addr: 30 (NOREGS)
[    1.665737] bgmac_bcma bcma0:3: Support for Roboswitch not implemented
[    1.673183] b53-srab-switch b53-srab-switch: invalid resource
[    1.679014] b53-srab-switch: probe of b53-srab-switch failed with error -22
[    1.686712] bgmac_bcma bcma0:4: Found PHY addr: 0
[    1.691441] bgmac_bcma bcma0:4: Support for Roboswitch not implemented
[    1.698004] bgmac_bcma bcma0:4: Invalid MAC addr: 00:00:00:00:00:00
[    1.704297] bgmac_bcma bcma0:4: Using random MAC: ee:f9:7c:52:b2:60
[    1.711985] bgmac_bcma bcma0:5: Found PHY addr: 0
[    1.716761] bgmac_bcma bcma0:5: Support for Roboswitch not implemented
[    1.723314] bgmac_bcma bcma0:5: Invalid MAC addr: 00:00:00:00:00:00
[    1.729620] bgmac_bcma bcma0:5: Using random MAC: ce:0c:13:93:68:9d
[    1.737379] bgmac_bcma bcma0:6: Unsupported core_unit 3
[    1.742692] bgmac_bcma: probe of bcma0:6 failed with error -524
[    1.748797] pcie_iproc_bcma bcma0:7: host bridge /axi@18000000/pcie@12000 ranges:
[    1.756318] pcie_iproc_bcma bcma0:7:   No bus range found for /axi@18000000/pcie@12000, using [bus 00-ff]
[    1.765934] OF: /axi@18000000/pcie@12000: Missing device_type
[    1.771709] pcie_iproc_bcma bcma0:7: non-prefetchable memory resource required
[    1.896518] pcie_iproc_bcma bcma0:7: link: UP
[    1.900988] pcie_iproc_bcma bcma0:7: PCI host bridge to bus 0000:00
[    1.907298] pci_bus 0000:00: root bus resource [bus 00-ff]
[    1.912798] pci_bus 0000:00: root bus resource [mem 0x08000000-0x0fffffff]
[    1.919724] pci 0000:00:00.0: [14e4:d612] type 01 class 0x060400
[    1.925751] pci_bus 0000:00: 2-byte config write to 0000:00:00.0 offset 0x4 may corrupt adjacent RW1C bits
[    1.935476] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
[    1.942235] PCI: bus0: Fast back to back transfers disabled
[    1.947844] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[    1.955988] pci 0000:01:00.0: [14e4:4365] type 00 class 0x028000
[    1.962037] pci_bus 0000:01: 2-byte config write to 0000:01:00.0 offset 0x4 may corrupt adjacent RW1C bits
[    1.971742] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00007fff 64bit]
[    1.978562] pci 0000:01:00.0: reg 0x18: [mem 0x00000000-0x007fffff 64bit]
[    1.985369] pci 0000:01:00.0: reg 0x20: [mem 0x00000000-0x000fffff 64bit pref]
[    1.992694] pci 0000:01:00.0: supports D1 D2
[    1.997572] PCI: bus1: Fast back to back transfers disabled
[    2.003168] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
[    2.009831] pci 0000:00:00.0: BAR 8: assigned [mem 0x08000000-0x08bfffff]
[    2.016652] pci 0000:00:00.0: BAR 9: assigned [mem 0x08c00000-0x08cfffff 64bit pref]
[    2.024420] pci 0000:01:00.0: BAR 2: assigned [mem 0x08000000-0x087fffff 64bit]
[    2.031765] pci 0000:01:00.0: BAR 4: assigned [mem 0x08c00000-0x08cfffff 64bit pref]
[    2.039541] pci 0000:01:00.0: BAR 0: assigned [mem 0x08800000-0x08807fff 64bit]
[    2.046877] pci 0000:00:00.0: PCI bridge to [bus 01]
[    2.051852] pci 0000:00:00.0:   bridge window [mem 0x08000000-0x08bfffff]
[    2.058664] pci 0000:00:00.0:   bridge window [mem 0x08c00000-0x08cfffff 64bit pref]
[    2.066648] pcie_iproc_bcma bcma0:8: host bridge /axi@18000000/pcie@13000 ranges:
[    2.074168] pcie_iproc_bcma bcma0:8:   No bus range found for /axi@18000000/pcie@13000, using [bus 00-ff]
[    2.083791] pcie_iproc_bcma bcma0:8: non-prefetchable memory resource required
[    2.206514] pcie_iproc_bcma bcma0:8: link: UP
[    2.210982] pcie_iproc_bcma bcma0:8: PCI host bridge to bus 0001:00
[    2.217298] pci_bus 0001:00: root bus resource [bus 00-ff]
[    2.222799] pci_bus 0001:00: root bus resource [mem 0x20000000-0x27ffffff]
[    2.229726] pci 0001:00:00.0: [14e4:d612] type 01 class 0x060400
[    2.235752] pci_bus 0001:00: 2-byte config write to 0001:00:00.0 offset 0x4 may corrupt adjacent RW1C bits
[    2.245479] pci 0001:00:00.0: PME# supported from D0 D3hot D3cold
[    2.252212] PCI: bus0: Fast back to back transfers disabled
[    2.257821] pci 0001:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[    2.265962] pci 0001:01:00.0: [14e4:4365] type 00 class 0x028000
[    2.272011] pci_bus 0001:01: 2-byte config write to 0001:01:00.0 offset 0x4 may corrupt adjacent RW1C bits
[    2.281714] pci 0001:01:00.0: reg 0x10: [mem 0x00000000-0x00007fff 64bit]
[    2.288536] pci 0001:01:00.0: reg 0x18: [mem 0x00000000-0x007fffff 64bit]
[    2.295344] pci 0001:01:00.0: reg 0x20: [mem 0x00000000-0x000fffff 64bit pref]
[    2.302669] pci 0001:01:00.0: supports D1 D2
[    2.307561] PCI: bus1: Fast back to back transfers disabled
[    2.313153] pci_bus 0001:01: busn_res: [bus 01-ff] end is updated to 01
[    2.319817] pci 0001:00:00.0: BAR 8: assigned [mem 0x20000000-0x20bfffff]
[    2.326636] pci 0001:00:00.0: BAR 9: assigned [mem 0x20c00000-0x20cfffff 64bit pref]
[    2.334395] pci 0001:01:00.0: BAR 2: assigned [mem 0x20000000-0x207fffff 64bit]
[    2.341739] pci 0001:01:00.0: BAR 4: assigned [mem 0x20c00000-0x20cfffff 64bit pref]
[    2.349517] pci 0001:01:00.0: BAR 0: assigned [mem 0x20800000-0x20807fff 64bit]
[    2.356853] pci 0001:00:00.0: PCI bridge to [bus 01]
[    2.361828] pci 0001:00:00.0:   bridge window [mem 0x20000000-0x20bfffff]
[    2.368640] pci 0001:00:00.0:   bridge window [mem 0x20c00000-0x20cfffff 64bit pref]
[    2.376611] pcie_iproc_bcma bcma0:9: host bridge /axi@18000000/pcie@14000 ranges:
[    2.384127] pcie_iproc_bcma bcma0:9:   No bus range found for /axi@18000000/pcie@14000, using [bus 00-ff]
[    2.393750] pcie_iproc_bcma bcma0:9: non-prefetchable memory resource required
[    2.516514] pcie_iproc_bcma bcma0:9: PHY or data link is INACTIVE!
[    2.522712] pcie_iproc_bcma bcma0:9: no PCIe EP device detected
[    2.529454] bcm47xx-wdt bcm47xx-wdt.0: BCM47xx Watchdog Timer enabled (30 seconds, Software Timer)
[    2.538528] bcma-host-soc 18000000.axi: bus0: Bus registered
[    2.545048] NET: Registered protocol family 10
[    2.550481] Segment Routing with IPv6
[    2.554201] NET: Registered protocol family 17
[    2.558744] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[    2.571917] 8021q: 802.1Q VLAN Support v1.8
[    2.576136] Registering SWP/SWPB emulation handler
[    2.583643] b53-srab-switch 18007000.ethernet-switch: found switch: BCM53012, rev 0
[    2.709500] b53-srab-switch 18007000.ethernet-switch lan1 (uninitialized): PHY [dsa-0.0:00] driver [Generic PHY] (irq=POLL)
[    2.721961] b53-srab-switch 18007000.ethernet-switch lan2 (uninitialized): PHY [dsa-0.0:01] driver [Generic PHY] (irq=POLL)
[    2.734367] b53-srab-switch 18007000.ethernet-switch lan3 (uninitialized): PHY [dsa-0.0:02] driver [Generic PHY] (irq=POLL)
[    2.746805] b53-srab-switch 18007000.ethernet-switch wan (uninitialized): PHY [dsa-0.0:03] driver [Generic PHY] (irq=POLL)
[    2.758573] b53-srab-switch 18007000.ethernet-switch: Using legacy PHYLIB callbacks. Please migrate to PHYLINK!
[    2.768967] DSA: tree 0 setup
[    2.772641] UBI: auto-attach mtd5
[    2.775976] ubi0: attaching mtd5
[    3.393602] ubi0: scanning is finished
[    3.405927] ubi0: attached mtd5 (name "ubi", size 120 MiB)
[    3.411475] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[    3.418379] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[    3.425176] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
[    3.432155] ubi0: good PEBs: 958, bad PEBs: 2, corrupted PEBs: 0
[    3.438177] ubi0: user volume: 2, internal volumes: 1, max. volumes count: 128
[    3.445414] ubi0: max/mean erase counter: 2/0, WL threshold: 4096, image sequence number: 1672705461
[    3.454578] ubi0: available PEBs: 0, total reserved PEBs: 958, PEBs reserved for bad PEB handling: 18
[    3.463871] ubi0: background thread "ubi_bgt0d" started, PID 456
[    3.470726] block ubiblock0_0: created from ubi0:0(rootfs)
[    3.476246] ubiblock: device ubiblock0_0 (rootfs) set to be root filesystem
[    3.486739] VFS: Mounted root (squashfs filesystem) readonly on device 254:0.
[    3.494669] Freeing unused kernel memory: 1024K
[    3.536626] Run /sbin/init as init process
[    3.540729]   with arguments:
[    3.540731]     /sbin/init
[    3.540733]   with environment:
[    3.540736]     HOME=/
[    3.540738]     TERM=linux
[    3.738217] init: Console is alive
[    3.741818] init: - watchdog -
[    4.022259] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[    4.086697] usbcore: registered new interface driver usbfs
[    4.092285] usbcore: registered new interface driver hub
[    4.097695] usbcore: registered new device driver usb
[    4.105413] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    4.112750] ehci-fsl: Freescale EHCI Host controller driver
[    4.119212] ehci-platform: EHCI generic platform driver
[    4.126986] ehci-platform 18021000.usb: EHCI Host Controller
[    4.129435] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    4.132697] ehci-platform 18021000.usb: new USB bus registered, assigned bus number 1
[    4.140014] ohci-platform: OHCI generic platform driver
[    4.147003] ehci-platform 18021000.usb: irq 45, io mem 0x18021000
[    4.152329] ohci-platform 18022000.usb: Generic Platform OHCI controller
[    4.165036] ohci-platform 18022000.usb: new USB bus registered, assigned bus number 2
[    4.173030] ohci-platform 18022000.usb: irq 45, io mem 0x18022000
[    4.186621] ehci-platform 18021000.usb: USB 2.0 started, EHCI 1.00
[    4.193286] hub 1-0:1.0: USB hub found
[    4.197133] hub 1-0:1.0: 2 ports detected
[    4.251063] hub 2-0:1.0: USB hub found
[    4.254874] hub 2-0:1.0: 2 ports detected
[    4.285885] xhci-hcd 18023000.usb: xHCI Host Controller
[    4.291179] xhci-hcd 18023000.usb: new USB bus registered, assigned bus number 3
[    4.298816] xhci-hcd 18023000.usb: hcc params 0x02501164 hci version 0x100 quirks 0x0000200000010010
[    4.308030] xhci-hcd 18023000.usb: irq 46, io mem 0x18023000
[    4.315134] hub 3-0:1.0: USB hub found
[    4.318971] hub 3-0:1.0: config failed, hub doesn't have any ports! (err -19)
[    4.326267] xhci-hcd 18023000.usb: xHCI Host Controller
[    4.331553] xhci-hcd 18023000.usb: new USB bus registered, assigned bus number 4
[    4.339004] xhci-hcd 18023000.usb: Host supports USB 3.0 SuperSpeed
[    4.346588] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[    4.355104] hub 4-0:1.0: USB hub found
[    4.358937] hub 4-0:1.0: 1 port detected
[    4.364816] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[    4.374424] init: - preinit -
[    5.285713] b53-srab-switch 18007000.ethernet-switch lan1: configuring for phy/gmii link mode
[    5.294371] bgmac_bcma bcma0:3 eth0: Link is Up - 1Gbps/Full - flow control off
[    5.301883] 8021q: adding VLAN 0 to HW filter on device lan1
[    5.366605] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[    9.541532] UBIFS (ubi0:1): Mounting in unauthenticated mode
[    9.547396] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 615
[    9.603928] UBIFS (ubi0:1): recovery needed
[    9.729769] UBIFS (ubi0:1): recovery completed
[    9.734295] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "rootfs_data"
[    9.742151] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[    9.752094] UBIFS (ubi0:1): FS size: 113008640 bytes (107 MiB, 890 LEBs), journal size 5713920 bytes (5 MiB, 45 LEBs)
[    9.762731] UBIFS (ubi0:1): reserved for root: 4952683 bytes (4836 KiB)
[    9.769362] UBIFS (ubi0:1): media format: w5/r0 (latest is w5/r0), UUID 29D57AB9-245C-400C-93B4-6387A5AC29C3, small LPT model
[    9.783482] mount_root: switching to ubifs overlay
[    9.797072] urandom-seed: Seeding with /etc/urandom.seed
[    9.970105] procd: - early -
[    9.973107] procd: - watchdog -
[   10.511423] procd: - watchdog -
[   10.515970] procd: - ubus -
[   10.574211] procd: - init -
[   11.015480] urngd: v1.0.2 started.
[   11.088243] kmodloader: loading kernel modules from /etc/modules.d/*
[   11.150023] Loading modules backported from Linux version v5.15.81-0-ge4a7232c917c
[   11.157639] Backport generated by backports.git v5.15.81-1-0-ge1867d55
[   11.204259] PPP generic driver version 2.4.2
[   11.210494] NET: Registered protocol family 24
[   11.219298] usbcore: registered new interface driver brcmfmac
[   11.225228] pci 0000:00:00.0: enabling device (0140 -> 0142)
[   11.230948] brcmfmac 0000:01:00.0: enabling device (0140 -> 0142)
[   11.356813] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac4366c-pcie for chip BCM4366/4
[   11.365585] brcmfmac 0000:01:00.0: Direct firmware load for brcm/brcmfmac4366c-pcie.phicomm,k3.bin failed with error -2
[   11.587846] brcmfmac 0000:01:00.0: Direct firmware load for brcm/brcmfmac4366c-pcie.phicomm,k3.txt failed with error -2
[   11.598738] brcmfmac 0000:01:00.0: Direct firmware load for brcm/brcmfmac4366c-pcie.txt failed with error -2
[   11.959235] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac4366c-pcie for chip BCM4366/4
[   11.967978] brcmfmac: brcmf_c_process_clm_blob: no clm_blob available (err=-2), device may have limited channels available
[   11.979236] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4366/4 wl0: Nov  5 2018 03:19:56 version 10.28.2 (r769115) FWID 01-d2cbb8fd
[   11.999388] pci 0001:00:00.0: enabling device (0140 -> 0142)
[   12.005089] brcmfmac 0001:01:00.0: enabling device (0140 -> 0142)
[   12.126911] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac4366c-pcie for chip BCM4366/4
[   12.135621] brcmfmac 0001:01:00.0: Direct firmware load for brcm/brcmfmac4366c-pcie.phicomm,k3.bin failed with error -2
[   12.149824] brcmfmac 0001:01:00.0: Direct firmware load for brcm/brcmfmac4366c-pcie.phicomm,k3.txt failed with error -2
[   12.160731] brcmfmac 0001:01:00.0: Direct firmware load for brcm/brcmfmac4366c-pcie.txt failed with error -2
[   12.501677] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac4366c-pcie for chip BCM4366/4
[   12.510431] brcmfmac: brcmf_c_process_clm_blob: no clm_blob available (err=-2), device may have limited channels available
[   12.521761] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4366/4 wl0: Nov  5 2018 03:19:56 version 10.28.2 (r769115) FWID 01-d2cbb8fd
[   12.552010] kmodloader: done loading kernel modules from /etc/modules.d/*
[   16.266315] bgmac_bcma bcma0:3 eth0: Link is Up - 1Gbps/Full - flow control off
[   16.275290] b53-srab-switch 18007000.ethernet-switch lan1: configuring for phy/gmii link mode
[   16.287495] 8021q: adding VLAN 0 to HW filter on device lan1
[   16.346945] br-lan: port 1(lan1) entered blocking state
[   16.352246] br-lan: port 1(lan1) entered disabled state
[   16.357892] device lan1 entered promiscuous mode
[   16.362547] device eth0 entered promiscuous mode
[   16.458209] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   16.494317] b53-srab-switch 18007000.ethernet-switch lan2: configuring for phy/gmii link mode
[   16.509821] 8021q: adding VLAN 0 to HW filter on device lan2
[   16.575784] br-lan: port 2(lan2) entered blocking state
[   16.581102] br-lan: port 2(lan2) entered disabled state
[   16.586757] device lan2 entered promiscuous mode
[   16.680269] b53-srab-switch 18007000.ethernet-switch lan3: configuring for phy/gmii link mode
[   16.692261] 8021q: adding VLAN 0 to HW filter on device lan3
[   16.786710] br-lan: port 3(lan3) entered blocking state
[   16.792001] br-lan: port 3(lan3) entered disabled state
[   16.797636] device lan3 entered promiscuous mode
[   16.920108] b53-srab-switch 18007000.ethernet-switch wan: configuring for phy/gmii link mode
[   16.930555] 8021q: adding VLAN 0 to HW filter on device wan
[   19.523827] br-lan: port 4(wlan1) entered blocking state
[   19.529209] br-lan: port 4(wlan1) entered disabled state
[   19.534729] device wlan1 entered promiscuous mode
[   31.904730] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[   31.911253] br-lan: port 4(wlan1) entered blocking state
[   31.916622] br-lan: port 4(wlan1) entered forwarding state
[   31.923351] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready

tjfigueiredo · February 17, 2023, 11:23am

syslog 1/2

Thu Feb 16 14:10:32 2023 kern.info kernel: [    0.000000] Booting Linux on physical CPU 0x0
Thu Feb 16 14:10:32 2023 kern.notice kernel: [    0.000000] Linux version 5.10.161 (builder@buildhost) (arm-openwrt-linux-muslgnueabi-gcc (OpenWrt GCC 11.2.0 r20028-43d71ad93e) 11.2.0, GNU ld (GNU Binutils) 2.37) #0 SMP Tue Jan 3 00:24:21 2023
Thu Feb 16 14:10:32 2023 kern.info kernel: [    0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=10c5387d
Thu Feb 16 14:10:32 2023 kern.info kernel: [    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Thu Feb 16 14:10:32 2023 kern.info kernel: [    0.000000] OF: fdt: Machine model: Phicomm K3
Thu Feb 16 14:10:32 2023 kern.info kernel: [    0.000000] Memory policy: Data cache writealloc
Thu Feb 16 14:10:32 2023 kern.warn kernel: [    0.000000] Hit pending asynchronous external abort (FSR=0x00001c06) during first unmask, this is most likely caused by a firmware/bootloader bug.
Thu Feb 16 14:10:32 2023 kern.info kernel: [    0.000000] Zone ranges:
Thu Feb 16 14:10:32 2023 kern.info kernel: [    0.000000]   Normal   [mem 0x0000000000000000-0x0000000007ffffff]
Thu Feb 16 14:10:32 2023 kern.info kernel: [    0.000000]   HighMem  [mem 0x0000000008000000-0x000000009fffffff]
Thu Feb 16 14:10:32 2023 kern.info kernel: [    0.000000] Movable zone start for each node
Thu Feb 16 14:10:32 2023 kern.info kernel: [    0.000000] Early memory node ranges
Thu Feb 16 14:10:32 2023 kern.info kernel: [    0.000000]   node   0: [mem 0x0000000000000000-0x0000000007ffffff]
Thu Feb 16 14:10:32 2023 kern.info kernel: [    0.000000]   node   0: [mem 0x0000000088000000-0x000000009fffffff]
Thu Feb 16 14:10:32 2023 kern.info kernel: [    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000009fffffff]
Thu Feb 16 14:10:32 2023 kern.debug kernel: [    0.000000] On node 0 totalpages: 131072
Thu Feb 16 14:10:32 2023 kern.debug kernel: [    0.000000]   Normal zone: 288 pages used for memmap
Thu Feb 16 14:10:32 2023 kern.debug kernel: [    0.000000]   Normal zone: 0 pages reserved
Thu Feb 16 14:10:32 2023 kern.debug kernel: [    0.000000]   Normal zone: 32768 pages, LIFO batch:7
Thu Feb 16 14:10:32 2023 kern.debug kernel: [    0.000000]   HighMem zone: 98304 pages, LIFO batch:31
Thu Feb 16 14:10:32 2023 kern.info kernel: [    0.000000] percpu: Embedded 14 pages/cpu s27596 r8192 d21556 u57344
Thu Feb 16 14:10:32 2023 kern.debug kernel: [    0.000000] pcpu-alloc: s27596 r8192 d21556 u57344 alloc=14*4096
Thu Feb 16 14:10:32 2023 kern.debug kernel: [    0.000000] pcpu-alloc: [0] 0 [0] 1
Thu Feb 16 14:10:32 2023 kern.info kernel: [    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 130784
Thu Feb 16 14:10:32 2023 kern.notice kernel: [    0.000000] Kernel command line:
Thu Feb 16 14:10:32 2023 kern.info kernel: [    0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes, linear)
Thu Feb 16 14:10:32 2023 kern.info kernel: [    0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes, linear)
Thu Feb 16 14:10:32 2023 kern.info kernel: [    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
Thu Feb 16 14:10:32 2023 kern.info kernel: [    0.000000] Memory: 509296K/524288K available (6212K kernel code, 570K rwdata, 816K rodata, 1024K init, 295K bss, 14992K reserved, 0K cma-reserved, 393216K highmem)
Thu Feb 16 14:10:32 2023 kern.info kernel: [    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Thu Feb 16 14:10:32 2023 kern.info kernel: [    0.000000] rcu: Hierarchical RCU implementation.
Thu Feb 16 14:10:32 2023 kern.info kernel: [    0.000000] 	Tracing variant of Tasks RCU enabled.
Thu Feb 16 14:10:32 2023 kern.info kernel: [    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
Thu Feb 16 14:10:32 2023 kern.info kernel: [    0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
Thu Feb 16 14:10:32 2023 kern.warn kernel: [    0.000000] L2C: DT/platform modifies aux control register: 0x0a130000 -> 0x3a530000
Thu Feb 16 14:10:32 2023 kern.info kernel: [    0.000000] L2C-310 enabling early BRESP for Cortex-A9
Thu Feb 16 14:10:32 2023 kern.info kernel: [    0.000000] L2C-310 full line of zeros enabled for Cortex-A9
Thu Feb 16 14:10:32 2023 kern.info kernel: [    0.000000] L2C-310 ID prefetch enabled, offset 1 lines
Thu Feb 16 14:10:32 2023 kern.info kernel: [    0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled
Thu Feb 16 14:10:32 2023 kern.info kernel: [    0.000000] L2C-310 cache controller enabled, 16 ways, 256 kB
Thu Feb 16 14:10:32 2023 kern.info kernel: [    0.000000] L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x7e530001
Thu Feb 16 14:10:32 2023 kern.info kernel: [    0.000010] sched_clock: 64 bits at 700MHz, resolution 1ns, wraps every 4398046511103ns
Thu Feb 16 14:10:32 2023 kern.info kernel: [    0.000024] clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0xa17102bcf3, max_idle_ns: 440795224838 ns
Thu Feb 16 14:10:32 2023 kern.info kernel: [    0.000043] Switching to timer-based delay loop, resolution 1ns
Thu Feb 16 14:10:32 2023 kern.info kernel: [    0.000220] Calibrating delay loop (skipped), value calculated using timer frequency.. 1400.00 BogoMIPS (lpj=7000000)
Thu Feb 16 14:10:32 2023 kern.info kernel: [    0.000231] pid_max: default: 32768 minimum: 301
Thu Feb 16 14:10:32 2023 kern.info kernel: [    0.000315] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
Thu Feb 16 14:10:32 2023 kern.info kernel: [    0.000324] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
Thu Feb 16 14:10:32 2023 kern.info kernel: [    0.000867] CPU: Testing write buffer coherency: ok
Thu Feb 16 14:10:32 2023 kern.info kernel: [    0.000901] CPU0: Spectre v2: using BPIALL workaround
Thu Feb 16 14:10:32 2023 kern.info kernel: [    0.001111] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Thu Feb 16 14:10:32 2023 kern.info kernel: [    0.001586] Setting up static identity map for 0x100000 - 0x10003c
Thu Feb 16 14:10:32 2023 kern.info kernel: [    0.001702] rcu: Hierarchical SRCU implementation.
Thu Feb 16 14:10:32 2023 kern.info kernel: [    0.001828] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build
Thu Feb 16 14:10:32 2023 kern.info kernel: [    0.001981] smp: Bringing up secondary CPUs ...
Thu Feb 16 14:10:32 2023 kern.info kernel: [    0.002579] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
Thu Feb 16 14:10:32 2023 kern.info kernel: [    0.002586] CPU1: Spectre v2: using BPIALL workaround
Thu Feb 16 14:10:32 2023 kern.info kernel: [    0.002679] smp: Brought up 1 node, 2 CPUs
Thu Feb 16 14:10:32 2023 kern.info kernel: [    0.002688] SMP: Total of 2 processors activated (2800.00 BogoMIPS).
Thu Feb 16 14:10:32 2023 kern.warn kernel: [    0.002693] CPU: WARNING: CPU(s) started in wrong/inconsistent modes (primary CPU mode 0x13)
Thu Feb 16 14:10:32 2023 kern.warn kernel: [    0.002697] CPU: This may indicate a broken bootloader or firmware.
Thu Feb 16 14:10:32 2023 kern.info kernel: [    0.004436] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
Thu Feb 16 14:10:32 2023 kern.info kernel: [    0.004457] futex hash table entries: 512 (order: 3, 32768 bytes, linear)
Thu Feb 16 14:10:32 2023 kern.info kernel: [    0.004577] pinctrl core: initialized pinctrl subsystem
Thu Feb 16 14:10:32 2023 kern.info kernel: [    0.005246] NET: Registered protocol family 16
Thu Feb 16 14:10:32 2023 kern.info kernel: [    0.005915] DMA: preallocated 256 KiB pool for atomic coherent allocations
Thu Feb 16 14:10:32 2023 kern.info kernel: [    0.006634] thermal_sys: Registered thermal governor 'step_wise'
Thu Feb 16 14:10:32 2023 kern.info kernel: [    0.026617] clocksource: Switched to clocksource arm_global_timer
Thu Feb 16 14:10:32 2023 kern.info kernel: [    0.027440] NET: Registered protocol family 2
Thu Feb 16 14:10:32 2023 kern.info kernel: [    0.027599] IP idents hash table entries: 2048 (order: 2, 16384 bytes, linear)
Thu Feb 16 14:10:32 2023 kern.info kernel: [    0.028340] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
Thu Feb 16 14:10:32 2023 kern.info kernel: [    0.028407] TCP established hash table entries: 1024 (order: 0, 4096 bytes, linear)
Thu Feb 16 14:10:32 2023 kern.info kernel: [    0.028424] TCP bind hash table entries: 1024 (order: 1, 8192 bytes, linear)
Thu Feb 16 14:10:32 2023 kern.info kernel: [    0.028440] TCP: Hash tables configured (established 1024 bind 1024)
Thu Feb 16 14:10:32 2023 kern.info kernel: [    0.028559] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
Thu Feb 16 14:10:32 2023 kern.info kernel: [    0.028608] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
Thu Feb 16 14:10:32 2023 kern.info kernel: [    0.028875] NET: Registered protocol family 1
Thu Feb 16 14:10:32 2023 kern.info kernel: [    0.028914] PCI: CLS 0 bytes, default 64
Thu Feb 16 14:10:32 2023 kern.info kernel: [    0.030738] workingset: timestamp_bits=14 max_order=17 bucket_order=3
Thu Feb 16 14:10:32 2023 kern.info kernel: [    0.032766] squashfs: version 4.0 (2009/01/31) Phillip Lougher
Thu Feb 16 14:10:32 2023 kern.info kernel: [    0.032781] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
Thu Feb 16 14:10:32 2023 kern.info kernel: [    0.033429] bounce: pool size: 64 pages
Thu Feb 16 14:10:32 2023 kern.info kernel: [    0.033494] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
Thu Feb 16 14:10:32 2023 kern.info kernel: [    0.034676] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
Thu Feb 16 14:10:32 2023 kern.info kernel: [    0.035639] printk: console [ttyS0] disabled
Thu Feb 16 14:10:32 2023 kern.info kernel: [    0.035693] 18000300.serial: ttyS0 at MMIO 0x18000300 (irq = 26, base_baud = 7812500) is a 16550
Thu Feb 16 14:10:32 2023 kern.info kernel: [    0.552953] printk: console [ttyS0] enabled
Thu Feb 16 14:10:32 2023 kern.info kernel: [    0.557519] 18000400.serial: ttyS1 at MMIO 0x18000400 (irq = 26, base_baud = 7812500) is a 16550
Thu Feb 16 14:10:32 2023 kern.info kernel: [    0.567530] bcm2835-rng 18004000.rng: hwrng registered
Thu Feb 16 14:10:32 2023 kern.info kernel: [    0.657250] nand: device found, Manufacturer ID: 0xec, Chip ID: 0xf1
Thu Feb 16 14:10:32 2023 kern.info kernel: [    0.663625] nand: Samsung NAND 128MiB 3,3V 8-bit
Thu Feb 16 14:10:32 2023 kern.info kernel: [    0.668273] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
Thu Feb 16 14:10:32 2023 kern.info kernel: [    0.675875] iproc_nand 18028000.nand-controller: detected 128MiB total, 128KiB blocks, 2KiB pages, 16B OOB, 8-bit, BCH-4
Thu Feb 16 14:10:32 2023 kern.info kernel: [    0.686806] Scanning device for bad blocks
Thu Feb 16 14:10:32 2023 kern.warn kernel: [    0.991291] Bad eraseblock 515 at 0x000004060000
Thu Feb 16 14:10:32 2023 kern.notice kernel: [    1.241883] random: crng init done
Thu Feb 16 14:10:32 2023 kern.warn kernel: [    1.291387] Bad eraseblock 1023 at 0x000007fe0000
Thu Feb 16 14:10:32 2023 kern.notice kernel: [    1.296384] 4 fixed-partitions partitions found on MTD device brcmnand.0
Thu Feb 16 14:10:32 2023 kern.notice kernel: [    1.303416] Creating 4 MTD partitions on "brcmnand.0":
Thu Feb 16 14:10:32 2023 kern.notice kernel: [    1.308607] 0x000000000000-0x000000080000 : "boot"
Thu Feb 16 14:10:32 2023 kern.notice kernel: [    1.313904] 0x000000080000-0x000000180000 : "nvram"
Thu Feb 16 14:10:32 2023 kern.notice kernel: [    1.319303] 0x000000180000-0x000000400000 : "phicomm"
Thu Feb 16 14:10:32 2023 kern.notice kernel: [    1.324842] 0x000000400000-0x000008000000 : "firmware"
Thu Feb 16 14:10:32 2023 kern.notice kernel: [    1.331405] 2 trx partitions found on MTD device firmware
Thu Feb 16 14:10:32 2023 kern.notice kernel: [    1.336860] Creating 2 MTD partitions on "firmware":
Thu Feb 16 14:10:32 2023 kern.notice kernel: [    1.341844] 0x00000000001c-0x000000400000 : "linux"
Thu Feb 16 14:10:32 2023 kern.warn kernel: [    1.346748] mtd: partition "linux" doesn't start on an erase/write block boundary -- force read-only
Thu Feb 16 14:10:32 2023 kern.notice kernel: [    1.356436] 0x000000400000-0x000007c00000 : "ubi"
Thu Feb 16 14:10:32 2023 kern.info kernel: [    1.363413] bcm_iproc 18029200.spi: using bspi-mspi mode
Thu Feb 16 14:10:32 2023 kern.info kernel: [    1.370726] iproc-mdio 18003000.mdio: Broadcom iProc MDIO bus registered
Thu Feb 16 14:10:32 2023 kern.info kernel: [    1.378916] b53-srab-switch 18007000.ethernet-switch: found switch: BCM53012, rev 0
Thu Feb 16 14:10:32 2023 kern.info kernel: [    1.386794] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded
Thu Feb 16 14:10:32 2023 kern.info kernel: [    1.392869] bcma-host-soc 18000000.axi: bus0: Found chip with id 53030, rev 0x00 and package 0x00
Thu Feb 16 14:10:32 2023 kern.info kernel: [    1.401877] bcma-host-soc 18000000.axi: bus0: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x2A, class 0x0)
Thu Feb 16 14:10:32 2023 kern.debug kernel: [    1.412476] bcma-host-soc 18000000.axi: bus0: bcma_of_get_irq() failed with rc=-22
Thu Feb 16 14:10:32 2023 kern.info kernel: [    1.412486] bcma-host-soc 18000000.axi: bus0: Core 1 found: Chipcommon B (manuf 0x4BF, id 0x50B, rev 0x05, class 0x0)
Thu Feb 16 14:10:32 2023 kern.debug kernel: [    1.423217] bcma-host-soc 18000000.axi: bus0: bcma_of_get_irq() failed with rc=-22
Thu Feb 16 14:10:32 2023 kern.info kernel: [    1.423224] bcma-host-soc 18000000.axi: bus0: Core 2 found: DMA (manuf 0x4BF, id 0x502, rev 0x04, class 0x0)
Thu Feb 16 14:10:32 2023 kern.info kernel: [    1.433205] bcma-host-soc 18000000.axi: bus0: Core 3 found: GBit MAC (manuf 0x4BF, id 0x82D, rev 0x07, class 0x0)
Thu Feb 16 14:10:32 2023 kern.info kernel: [    1.443610] bcma-host-soc 18000000.axi: bus0: Core 4 found: GBit MAC (manuf 0x4BF, id 0x82D, rev 0x07, class 0x0)
Thu Feb 16 14:10:32 2023 kern.info kernel: [    1.454018] bcma-host-soc 18000000.axi: bus0: Core 5 found: GBit MAC (manuf 0x4BF, id 0x82D, rev 0x07, class 0x0)
Thu Feb 16 14:10:32 2023 kern.info kernel: [    1.464427] bcma-host-soc 18000000.axi: bus0: Core 6 found: GBit MAC (manuf 0x4BF, id 0x82D, rev 0x07, class 0x0)
Thu Feb 16 14:10:32 2023 kern.info kernel: [    1.474785] bcma-host-soc 18000000.axi: bus0: Core 7 found: PCIe Gen 2 (manuf 0x4BF, id 0x501, rev 0x07, class 0x0)
Thu Feb 16 14:10:32 2023 kern.info kernel: [    1.485320] bcma-host-soc 18000000.axi: bus0: Core 8 found: PCIe Gen 2 (manuf 0x4BF, id 0x501, rev 0x07, class 0x0)
Thu Feb 16 14:10:32 2023 kern.info kernel: [    1.495861] bcma-host-soc 18000000.axi: bus0: Core 9 found: PCIe Gen 2 (manuf 0x4BF, id 0x501, rev 0x07, class 0x0)
Thu Feb 16 14:10:32 2023 kern.debug kernel: [    1.506413] bcma-host-soc 18000000.axi: bus0: bcma_of_get_irq() failed with rc=-22
Thu Feb 16 14:10:32 2023 kern.info kernel: [    1.506421] bcma-host-soc 18000000.axi: bus0: Core 10 found: ARM Cortex A9 core (ihost) (manuf 0x4BF, id 0x510, rev 0x07, class 0x0)
Thu Feb 16 14:10:32 2023 kern.info kernel: [    1.518445] bcma-host-soc 18000000.axi: bus0: Core 11 found: USB 2.0 (manuf 0x4BF, id 0x504, rev 0x07, class 0x0)
Thu Feb 16 14:10:32 2023 kern.info kernel: [    1.528837] bcma-host-soc 18000000.axi: bus0: Core 12 found: USB 3.0 (manuf 0x4BF, id 0x505, rev 0x07, class 0x0)
Thu Feb 16 14:10:32 2023 kern.debug kernel: [    1.539226] bcma-host-soc 18000000.axi: bus0: bcma_of_get_irq() failed with rc=-22
Thu Feb 16 14:10:32 2023 kern.info kernel: [    1.539233] bcma-host-soc 18000000.axi: bus0: Core 13 found: SDIO3 (manuf 0x4BF, id 0x503, rev 0x01, class 0x0)
Thu Feb 16 14:10:32 2023 kern.debug kernel: [    1.549436] bcma-host-soc 18000000.axi: bus0: bcma_of_get_irq() failed with rc=-22
Thu Feb 16 14:10:32 2023 kern.info kernel: [    1.549443] bcma-host-soc 18000000.axi: bus0: Core 14 found: I2S (manuf 0x4BF, id 0x834, rev 0x03, class 0x0)
Thu Feb 16 14:10:32 2023 kern.debug kernel: [    1.559468] bcma-host-soc 18000000.axi: bus0: bcma_of_get_irq() failed with rc=-22
Thu Feb 16 14:10:32 2023 kern.info kernel: [    1.559475] bcma-host-soc 18000000.axi: bus0: Core 15 found: ARM Cortex A9 JTAG (manuf 0x4BF, id 0x506, rev 0x01, class 0x0)
Thu Feb 16 14:10:32 2023 kern.debug kernel: [    1.570822] bcma-host-soc 18000000.axi: bus0: bcma_of_get_irq() failed with rc=-22
Thu Feb 16 14:10:32 2023 kern.info kernel: [    1.570829] bcma-host-soc 18000000.axi: bus0: Core 16 found: Denali DDR2/DDR3 memory controller (manuf 0x4BF, id 0x507, rev 0x01, class 0x0)
Thu Feb 16 14:10:32 2023 kern.debug kernel: [    1.583557] bcma-host-soc 18000000.axi: bus0: bcma_of_get_irq() failed with rc=-22
Thu Feb 16 14:10:32 2023 kern.info kernel: [    1.583564] bcma-host-soc 18000000.axi: bus0: Core 17 found: ROM (manuf 0x4BF, id 0x508, rev 0x08, class 0x0)
Thu Feb 16 14:10:32 2023 kern.info kernel: [    1.593619] bcma-host-soc 18000000.axi: bus0: Core 18 found: NAND flash controller (manuf 0x4BF, id 0x509, rev 0x01, class 0x0)
Thu Feb 16 14:10:32 2023 kern.debug kernel: [    1.605219] bcma-host-soc 18000000.axi: bus0: bcma_of_get_irq() failed with rc=-22
Thu Feb 16 14:10:32 2023 kern.info kernel: [    1.605226] bcma-host-soc 18000000.axi: bus0: Core 19 found: SPI flash controller (manuf 0x4BF, id 0x50A, rev 0x01, class 0x0)
Thu Feb 16 14:10:32 2023 kern.err kernel: [    1.616668] bcma-host-soc 18000000.axi: bus0: Flash type not supported
Thu Feb 16 14:10:32 2023 kern.debug kernel: [    1.659855] bcma-host-soc 18000000.axi: bus0: Using SPROM revision 8 provided by platform.
Thu Feb 16 14:10:32 2023 kern.info kernel: [    1.660131] bgmac_bcma bcma0:3: Found PHY addr: 30 (NOREGS)
Thu Feb 16 14:10:32 2023 kern.warn kernel: [    1.665737] bgmac_bcma bcma0:3: Support for Roboswitch not implemented
Thu Feb 16 14:10:32 2023 kern.err kernel: [    1.673183] b53-srab-switch b53-srab-switch: invalid resource
Thu Feb 16 14:10:32 2023 kern.warn kernel: [    1.679014] b53-srab-switch: probe of b53-srab-switch failed with error -22
Thu Feb 16 14:10:32 2023 kern.info kernel: [    1.686712] bgmac_bcma bcma0:4: Found PHY addr: 0
Thu Feb 16 14:10:32 2023 kern.warn kernel: [    1.691441] bgmac_bcma bcma0:4: Support for Roboswitch not implemented
Thu Feb 16 14:10:32 2023 kern.err kernel: [    1.698004] bgmac_bcma bcma0:4: Invalid MAC addr: 00:00:00:00:00:00
Thu Feb 16 14:10:32 2023 kern.warn kernel: [    1.704297] bgmac_bcma bcma0:4: Using random MAC: ee:f9:7c:52:b2:60
Thu Feb 16 14:10:32 2023 kern.info kernel: [    1.711985] bgmac_bcma bcma0:5: Found PHY addr: 0
Thu Feb 16 14:10:32 2023 kern.warn kernel: [    1.716761] bgmac_bcma bcma0:5: Support for Roboswitch not implemented
Thu Feb 16 14:10:32 2023 kern.err kernel: [    1.723314] bgmac_bcma bcma0:5: Invalid MAC addr: 00:00:00:00:00:00
Thu Feb 16 14:10:32 2023 kern.warn kernel: [    1.729620] bgmac_bcma bcma0:5: Using random MAC: ce:0c:13:93:68:9d
Thu Feb 16 14:10:32 2023 kern.err kernel: [    1.737379] bgmac_bcma bcma0:6: Unsupported core_unit 3
Thu Feb 16 14:10:32 2023 kern.warn kernel: [    1.742692] bgmac_bcma: probe of bcma0:6 failed with error -524
Thu Feb 16 14:10:32 2023 kern.info kernel: [    1.748797] pcie_iproc_bcma bcma0:7: host bridge /axi@18000000/pcie@12000 ranges:
Thu Feb 16 14:10:32 2023 kern.info kernel: [    1.756318] pcie_iproc_bcma bcma0:7:   No bus range found for /axi@18000000/pcie@12000, using [bus 00-ff]
Thu Feb 16 14:10:32 2023 kern.warn kernel: [    1.765934] OF: /axi@18000000/pcie@12000: Missing device_type
Thu Feb 16 14:10:32 2023 kern.warn kernel: [    1.771709] pcie_iproc_bcma bcma0:7: non-prefetchable memory resource required
Thu Feb 16 14:10:32 2023 kern.info kernel: [    1.896518] pcie_iproc_bcma bcma0:7: link: UP
Thu Feb 16 14:10:32 2023 kern.info kernel: [    1.900988] pcie_iproc_bcma bcma0:7: PCI host bridge to bus 0000:00
Thu Feb 16 14:10:32 2023 kern.info kernel: [    1.907298] pci_bus 0000:00: root bus resource [bus 00-ff]
Thu Feb 16 14:10:32 2023 kern.info kernel: [    1.912798] pci_bus 0000:00: root bus resource [mem 0x08000000-0x0fffffff]
Thu Feb 16 14:10:32 2023 kern.info kernel: [    1.919724] pci 0000:00:00.0: [14e4:d612] type 01 class 0x060400
Thu Feb 16 14:10:32 2023 kern.warn kernel: [    1.925751] pci_bus 0000:00: 2-byte config write to 0000:00:00.0 offset 0x4 may corrupt adjacent RW1C bits
Thu Feb 16 14:10:32 2023 kern.info kernel: [    1.935476] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
Thu Feb 16 14:10:32 2023 kern.info kernel: [    1.942235] PCI: bus0: Fast back to back transfers disabled
Thu Feb 16 14:10:32 2023 kern.info kernel: [    1.947844] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
Thu Feb 16 14:10:32 2023 kern.info kernel: [    1.955988] pci 0000:01:00.0: [14e4:4365] type 00 class 0x028000
Thu Feb 16 14:10:32 2023 kern.warn kernel: [    1.962037] pci_bus 0000:01: 2-byte config write to 0000:01:00.0 offset 0x4 may corrupt adjacent RW1C bits
Thu Feb 16 14:10:32 2023 kern.info kernel: [    1.971742] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00007fff 64bit]
Thu Feb 16 14:10:32 2023 kern.info kernel: [    1.978562] pci 0000:01:00.0: reg 0x18: [mem 0x00000000-0x007fffff 64bit]
Thu Feb 16 14:10:32 2023 kern.info kernel: [    1.985369] pci 0000:01:00.0: reg 0x20: [mem 0x00000000-0x000fffff 64bit pref]
Thu Feb 16 14:10:32 2023 kern.info kernel: [    1.992694] pci 0000:01:00.0: supports D1 D2
Thu Feb 16 14:10:32 2023 kern.info kernel: [    1.997572] PCI: bus1: Fast back to back transfers disabled
Thu Feb 16 14:10:32 2023 kern.info kernel: [    2.003168] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
Thu Feb 16 14:10:32 2023 kern.info kernel: [    2.009831] pci 0000:00:00.0: BAR 8: assigned [mem 0x08000000-0x08bfffff]
Thu Feb 16 14:10:32 2023 kern.info kernel: [    2.016652] pci 0000:00:00.0: BAR 9: assigned [mem 0x08c00000-0x08cfffff 64bit pref]
Thu Feb 16 14:10:32 2023 kern.info kernel: [    2.024420] pci 0000:01:00.0: BAR 2: assigned [mem 0x08000000-0x087fffff 64bit]
Thu Feb 16 14:10:32 2023 kern.info kernel: [    2.031765] pci 0000:01:00.0: BAR 4: assigned [mem 0x08c00000-0x08cfffff 64bit pref]
Thu Feb 16 14:10:32 2023 kern.info kernel: [    2.039541] pci 0000:01:00.0: BAR 0: assigned [mem 0x08800000-0x08807fff 64bit]
Thu Feb 16 14:10:32 2023 kern.info kernel: [    2.046877] pci 0000:00:00.0: PCI bridge to [bus 01]
Thu Feb 16 14:10:32 2023 kern.info kernel: [    2.051852] pci 0000:00:00.0:   bridge window [mem 0x08000000-0x08bfffff]
Thu Feb 16 14:10:32 2023 kern.info kernel: [    2.058664] pci 0000:00:00.0:   bridge window [mem 0x08c00000-0x08cfffff 64bit pref]
Thu Feb 16 14:10:32 2023 kern.info kernel: [    2.066648] pcie_iproc_bcma bcma0:8: host bridge /axi@18000000/pcie@13000 ranges:
Thu Feb 16 14:10:32 2023 kern.info kernel: [    2.074168] pcie_iproc_bcma bcma0:8:   No bus range found for /axi@18000000/pcie@13000, using [bus 00-ff]
Thu Feb 16 14:10:32 2023 kern.warn kernel: [    2.083791] pcie_iproc_bcma bcma0:8: non-prefetchable memory resource required
Thu Feb 16 14:10:32 2023 kern.info kernel: [    2.206514] pcie_iproc_bcma bcma0:8: link: UP
Thu Feb 16 14:10:32 2023 kern.info kernel: [    2.210982] pcie_iproc_bcma bcma0:8: PCI host bridge to bus 0001:00
Thu Feb 16 14:10:32 2023 kern.info kernel: [    2.217298] pci_bus 0001:00: root bus resource [bus 00-ff]
Thu Feb 16 14:10:32 2023 kern.info kernel: [    2.222799] pci_bus 0001:00: root bus resource [mem 0x20000000-0x27ffffff]
Thu Feb 16 14:10:32 2023 kern.info kernel: [    2.229726] pci 0001:00:00.0: [14e4:d612] type 01 class 0x060400
Thu Feb 16 14:10:32 2023 kern.warn kernel: [    2.235752] pci_bus 0001:00: 2-byte config write to 0001:00:00.0 offset 0x4 may corrupt adjacent RW1C bits
Thu Feb 16 14:10:32 2023 kern.info kernel: [    2.245479] pci 0001:00:00.0: PME# supported from D0 D3hot D3cold
Thu Feb 16 14:10:32 2023 kern.info kernel: [    2.252212] PCI: bus0: Fast back to back transfers disabled
Thu Feb 16 14:10:32 2023 kern.info kernel: [    2.257821] pci 0001:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
Thu Feb 16 14:10:32 2023 kern.info kernel: [    2.265962] pci 0001:01:00.0: [14e4:4365] type 00 class 0x028000
Thu Feb 16 14:10:32 2023 kern.warn kernel: [    2.272011] pci_bus 0001:01: 2-byte config write to 0001:01:00.0 offset 0x4 may corrupt adjacent RW1C bits
Thu Feb 16 14:10:32 2023 kern.info kernel: [    2.281714] pci 0001:01:00.0: reg 0x10: [mem 0x00000000-0x00007fff 64bit]
Thu Feb 16 14:10:32 2023 kern.info kernel: [    2.288536] pci 0001:01:00.0: reg 0x18: [mem 0x00000000-0x007fffff 64bit]
Thu Feb 16 14:10:32 2023 kern.info kernel: [    2.295344] pci 0001:01:00.0: reg 0x20: [mem 0x00000000-0x000fffff 64bit pref]
Thu Feb 16 14:10:32 2023 kern.info kernel: [    2.302669] pci 0001:01:00.0: supports D1 D2
Thu Feb 16 14:10:32 2023 kern.info kernel: [    2.307561] PCI: bus1: Fast back to back transfers disabled
Thu Feb 16 14:10:32 2023 kern.info kernel: [    2.313153] pci_bus 0001:01: busn_res: [bus 01-ff] end is updated to 01
Thu Feb 16 14:10:32 2023 kern.info kernel: [    2.319817] pci 0001:00:00.0: BAR 8: assigned [mem 0x20000000-0x20bfffff]
Thu Feb 16 14:10:32 2023 kern.info kernel: [    2.326636] pci 0001:00:00.0: BAR 9: assigned [mem 0x20c00000-0x20cfffff 64bit pref]
Thu Feb 16 14:10:32 2023 kern.info kernel: [    2.334395] pci 0001:01:00.0: BAR 2: assigned [mem 0x20000000-0x207fffff 64bit]
Thu Feb 16 14:10:32 2023 kern.info kernel: [    2.341739] pci 0001:01:00.0: BAR 4: assigned [mem 0x20c00000-0x20cfffff 64bit pref]
Thu Feb 16 14:10:32 2023 kern.info kernel: [    2.349517] pci 0001:01:00.0: BAR 0: assigned [mem 0x20800000-0x20807fff 64bit]
Thu Feb 16 14:10:32 2023 kern.info kernel: [    2.356853] pci 0001:00:00.0: PCI bridge to [bus 01]
Thu Feb 16 14:10:32 2023 kern.info kernel: [    2.361828] pci 0001:00:00.0:   bridge window [mem 0x20000000-0x20bfffff]
Thu Feb 16 14:10:32 2023 kern.info kernel: [    2.368640] pci 0001:00:00.0:   bridge window [mem 0x20c00000-0x20cfffff 64bit pref]
Thu Feb 16 14:10:32 2023 kern.info kernel: [    2.376611] pcie_iproc_bcma bcma0:9: host bridge /axi@18000000/pcie@14000 ranges:
Thu Feb 16 14:10:32 2023 kern.info kernel: [    2.384127] pcie_iproc_bcma bcma0:9:   No bus range found for /axi@18000000/pcie@14000, using [bus 00-ff]
Thu Feb 16 14:10:32 2023 kern.warn kernel: [    2.393750] pcie_iproc_bcma bcma0:9: non-prefetchable memory resource required
Thu Feb 16 14:10:32 2023 kern.err kernel: [    2.516514] pcie_iproc_bcma bcma0:9: PHY or data link is INACTIVE!
Thu Feb 16 14:10:32 2023 kern.err kernel: [    2.522712] pcie_iproc_bcma bcma0:9: no PCIe EP device detected
Thu Feb 16 14:10:32 2023 kern.info kernel: [    2.529454] bcm47xx-wdt bcm47xx-wdt.0: BCM47xx Watchdog Timer enabled (30 seconds, Software Timer)
Thu Feb 16 14:10:32 2023 kern.info kernel: [    2.538528] bcma-host-soc 18000000.axi: bus0: Bus registered
Thu Feb 16 14:10:32 2023 kern.info kernel: [    2.545048] NET: Registered protocol family 10
Thu Feb 16 14:10:32 2023 kern.info kernel: [    2.550481] Segment Routing with IPv6
Thu Feb 16 14:10:32 2023 kern.info kernel: [    2.554201] NET: Registered protocol family 17
Thu Feb 16 14:10:32 2023 kern.info kernel: [    2.558744] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
Thu Feb 16 14:10:32 2023 kern.info kernel: [    2.571917] 8021q: 802.1Q VLAN Support v1.8
Thu Feb 16 14:10:32 2023 kern.notice kernel: [    2.576136] Registering SWP/SWPB emulation handler
Thu Feb 16 14:10:32 2023 kern.info kernel: [    2.583643] b53-srab-switch 18007000.ethernet-switch: found switch: BCM53012, rev 0
Thu Feb 16 14:10:32 2023 kern.info kernel: [    2.709500] b53-srab-switch 18007000.ethernet-switch lan1 (uninitialized): PHY [dsa-0.0:00] driver [Generic PHY] (irq=POLL)
Thu Feb 16 14:10:32 2023 kern.info kernel: [    2.721961] b53-srab-switch 18007000.ethernet-switch lan2 (uninitialized): PHY [dsa-0.0:01] driver [Generic PHY] (irq=POLL)
Thu Feb 16 14:10:32 2023 kern.info kernel: [    2.734367] b53-srab-switch 18007000.ethernet-switch lan3 (uninitialized): PHY [dsa-0.0:02] driver [Generic PHY] (irq=POLL)
Thu Feb 16 14:10:32 2023 kern.info kernel: [    2.746805] b53-srab-switch 18007000.ethernet-switch wan (uninitialized): PHY [dsa-0.0:03] driver [Generic PHY] (irq=POLL)
Thu Feb 16 14:10:32 2023 kern.warn kernel: [    2.758573] b53-srab-switch 18007000.ethernet-switch: Using legacy PHYLIB callbacks. Please migrate to PHYLINK!
Thu Feb 16 14:10:32 2023 kern.info kernel: [    2.768967] DSA: tree 0 setup
Thu Feb 16 14:10:32 2023 kern.notice kernel: [    2.772641] UBI: auto-attach mtd5
Thu Feb 16 14:10:32 2023 kern.notice kernel: [    2.775976] ubi0: attaching mtd5
Thu Feb 16 14:10:32 2023 kern.notice kernel: [    3.393602] ubi0: scanning is finished
Thu Feb 16 14:10:32 2023 kern.notice kernel: [    3.405927] ubi0: attached mtd5 (name "ubi", size 120 MiB)
Thu Feb 16 14:10:32 2023 kern.notice kernel: [    3.411475] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
Thu Feb 16 14:10:32 2023 kern.notice kernel: [    3.418379] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
Thu Feb 16 14:10:32 2023 kern.notice kernel: [    3.425176] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
Thu Feb 16 14:10:32 2023 kern.notice kernel: [    3.432155] ubi0: good PEBs: 958, bad PEBs: 2, corrupted PEBs: 0
Thu Feb 16 14:10:32 2023 kern.notice kernel: [    3.438177] ubi0: user volume: 2, internal volumes: 1, max. volumes count: 128
Thu Feb 16 14:10:32 2023 kern.notice kernel: [    3.445414] ubi0: max/mean erase counter: 2/0, WL threshold: 4096, image sequence number: 1672705461
Thu Feb 16 14:10:32 2023 kern.notice kernel: [    3.454578] ubi0: available PEBs: 0, total reserved PEBs: 958, PEBs reserved for bad PEB handling: 18
Thu Feb 16 14:10:32 2023 kern.notice kernel: [    3.463871] ubi0: background thread "ubi_bgt0d" started, PID 456
Thu Feb 16 14:10:32 2023 kern.info kernel: [    3.470726] block ubiblock0_0: created from ubi0:0(rootfs)
Thu Feb 16 14:10:32 2023 kern.notice kernel: [    3.476246] ubiblock: device ubiblock0_0 (rootfs) set to be root filesystem
Thu Feb 16 14:10:32 2023 kern.info kernel: [    3.486739] VFS: Mounted root (squashfs filesystem) readonly on device 254:0.
Thu Feb 16 14:10:32 2023 kern.info kernel: [    3.494669] Freeing unused kernel memory: 1024K
Thu Feb 16 14:10:32 2023 kern.info kernel: [    3.536626] Run /sbin/init as init process
Thu Feb 16 14:10:32 2023 kern.debug kernel: [    3.540729]   with arguments:
Thu Feb 16 14:10:32 2023 kern.debug kernel: [    3.540731]     /sbin/init
Thu Feb 16 14:10:32 2023 kern.debug kernel: [    3.540733]   with environment:
Thu Feb 16 14:10:32 2023 kern.debug kernel: [    3.540736]     HOME=/
Thu Feb 16 14:10:32 2023 kern.debug kernel: [    3.540738]     TERM=linux

tjfigueiredo · February 17, 2023, 11:24am

syslog 2/2

Thu Feb 16 14:10:32 2023 user.info kernel: [    3.738217] init: Console is alive
Thu Feb 16 14:10:32 2023 user.info kernel: [    3.741818] init: - watchdog -
Thu Feb 16 14:10:32 2023 user.info kernel: [    4.022259] kmodloader: loading kernel modules from /etc/modules-boot.d/*
Thu Feb 16 14:10:32 2023 kern.info kernel: [    4.086697] usbcore: registered new interface driver usbfs
Thu Feb 16 14:10:32 2023 kern.info kernel: [    4.092285] usbcore: registered new interface driver hub
Thu Feb 16 14:10:32 2023 kern.info kernel: [    4.097695] usbcore: registered new device driver usb
Thu Feb 16 14:10:32 2023 kern.info kernel: [    4.105413] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Thu Feb 16 14:10:32 2023 kern.info kernel: [    4.112750] ehci-fsl: Freescale EHCI Host controller driver
Thu Feb 16 14:10:32 2023 kern.info kernel: [    4.119212] ehci-platform: EHCI generic platform driver
Thu Feb 16 14:10:32 2023 kern.info kernel: [    4.126986] ehci-platform 18021000.usb: EHCI Host Controller
Thu Feb 16 14:10:32 2023 kern.info kernel: [    4.129435] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Thu Feb 16 14:10:32 2023 kern.info kernel: [    4.132697] ehci-platform 18021000.usb: new USB bus registered, assigned bus number 1
Thu Feb 16 14:10:32 2023 kern.info kernel: [    4.140014] ohci-platform: OHCI generic platform driver
Thu Feb 16 14:10:32 2023 kern.info kernel: [    4.147003] ehci-platform 18021000.usb: irq 45, io mem 0x18021000
Thu Feb 16 14:10:32 2023 kern.info kernel: [    4.152329] ohci-platform 18022000.usb: Generic Platform OHCI controller
Thu Feb 16 14:10:32 2023 kern.info kernel: [    4.165036] ohci-platform 18022000.usb: new USB bus registered, assigned bus number 2
Thu Feb 16 14:10:32 2023 kern.info kernel: [    4.173030] ohci-platform 18022000.usb: irq 45, io mem 0x18022000
Thu Feb 16 14:10:32 2023 kern.info kernel: [    4.186621] ehci-platform 18021000.usb: USB 2.0 started, EHCI 1.00
Thu Feb 16 14:10:32 2023 kern.info kernel: [    4.193286] hub 1-0:1.0: USB hub found
Thu Feb 16 14:10:32 2023 kern.info kernel: [    4.197133] hub 1-0:1.0: 2 ports detected
Thu Feb 16 14:10:32 2023 kern.info kernel: [    4.251063] hub 2-0:1.0: USB hub found
Thu Feb 16 14:10:32 2023 kern.info kernel: [    4.254874] hub 2-0:1.0: 2 ports detected
Thu Feb 16 14:10:32 2023 kern.info kernel: [    4.285885] xhci-hcd 18023000.usb: xHCI Host Controller
Thu Feb 16 14:10:32 2023 kern.info kernel: [    4.291179] xhci-hcd 18023000.usb: new USB bus registered, assigned bus number 3
Thu Feb 16 14:10:32 2023 kern.info kernel: [    4.298816] xhci-hcd 18023000.usb: hcc params 0x02501164 hci version 0x100 quirks 0x0000200000010010
Thu Feb 16 14:10:32 2023 kern.info kernel: [    4.308030] xhci-hcd 18023000.usb: irq 46, io mem 0x18023000
Thu Feb 16 14:10:32 2023 kern.info kernel: [    4.315134] hub 3-0:1.0: USB hub found
Thu Feb 16 14:10:32 2023 kern.err kernel: [    4.318971] hub 3-0:1.0: config failed, hub doesn't have any ports! (err -19)
Thu Feb 16 14:10:32 2023 kern.info kernel: [    4.326267] xhci-hcd 18023000.usb: xHCI Host Controller
Thu Feb 16 14:10:32 2023 kern.info kernel: [    4.331553] xhci-hcd 18023000.usb: new USB bus registered, assigned bus number 4
Thu Feb 16 14:10:32 2023 kern.info kernel: [    4.339004] xhci-hcd 18023000.usb: Host supports USB 3.0 SuperSpeed
Thu Feb 16 14:10:32 2023 kern.info kernel: [    4.346588] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
Thu Feb 16 14:10:32 2023 kern.info kernel: [    4.355104] hub 4-0:1.0: USB hub found
Thu Feb 16 14:10:32 2023 kern.info kernel: [    4.358937] hub 4-0:1.0: 1 port detected
Thu Feb 16 14:10:32 2023 user.info kernel: [    4.364816] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
Thu Feb 16 14:10:32 2023 user.info kernel: [    4.374424] init: - preinit -
Thu Feb 16 14:10:32 2023 kern.info kernel: [    5.285713] b53-srab-switch 18007000.ethernet-switch lan1: configuring for phy/gmii link mode
Thu Feb 16 14:10:32 2023 kern.info kernel: [    5.294371] bgmac_bcma bcma0:3 eth0: Link is Up - 1Gbps/Full - flow control off
Thu Feb 16 14:10:32 2023 kern.info kernel: [    5.301883] 8021q: adding VLAN 0 to HW filter on device lan1
Thu Feb 16 14:10:32 2023 kern.info kernel: [    5.366605] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Thu Feb 16 14:10:32 2023 kern.notice kernel: [    9.541532] UBIFS (ubi0:1): Mounting in unauthenticated mode
Thu Feb 16 14:10:32 2023 kern.notice kernel: [    9.547396] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 615
Thu Feb 16 14:10:32 2023 kern.notice kernel: [    9.603928] UBIFS (ubi0:1): recovery needed
Thu Feb 16 14:10:32 2023 kern.notice kernel: [    9.729769] UBIFS (ubi0:1): recovery completed
Thu Feb 16 14:10:32 2023 kern.notice kernel: [    9.734295] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "rootfs_data"
Thu Feb 16 14:10:32 2023 kern.notice kernel: [    9.742151] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
Thu Feb 16 14:10:32 2023 kern.notice kernel: [    9.752094] UBIFS (ubi0:1): FS size: 113008640 bytes (107 MiB, 890 LEBs), journal size 5713920 bytes (5 MiB, 45 LEBs)
Thu Feb 16 14:10:32 2023 kern.notice kernel: [    9.762731] UBIFS (ubi0:1): reserved for root: 4952683 bytes (4836 KiB)
Thu Feb 16 14:10:32 2023 kern.notice kernel: [    9.769362] UBIFS (ubi0:1): media format: w5/r0 (latest is w5/r0), UUID 29D57AB9-245C-400C-93B4-6387A5AC29C3, small LPT model
Thu Feb 16 14:10:32 2023 user.info kernel: [    9.783482] mount_root: switching to ubifs overlay
Thu Feb 16 14:10:32 2023 user.warn kernel: [    9.797072] urandom-seed: Seeding with /etc/urandom.seed
Thu Feb 16 14:10:32 2023 user.info kernel: [    9.970105] procd: - early -
Thu Feb 16 14:10:32 2023 user.info kernel: [    9.973107] procd: - watchdog -
Thu Feb 16 14:10:32 2023 user.info kernel: [   10.511423] procd: - watchdog -
Thu Feb 16 14:10:32 2023 user.info kernel: [   10.515970] procd: - ubus -
Thu Feb 16 14:10:32 2023 user.info kernel: [   10.574211] procd: - init -
Thu Feb 16 14:10:32 2023 user.info kernel: [   11.015480] urngd: v1.0.2 started.
Thu Feb 16 14:10:32 2023 user.info kernel: [   11.088243] kmodloader: loading kernel modules from /etc/modules.d/*
Thu Feb 16 14:10:32 2023 kern.info kernel: [   11.150023] Loading modules backported from Linux version v5.15.81-0-ge4a7232c917c
Thu Feb 16 14:10:32 2023 kern.info kernel: [   11.157639] Backport generated by backports.git v5.15.81-1-0-ge1867d55
Thu Feb 16 14:10:32 2023 kern.info kernel: [   11.204259] PPP generic driver version 2.4.2
Thu Feb 16 14:10:32 2023 kern.info kernel: [   11.210494] NET: Registered protocol family 24
Thu Feb 16 14:10:32 2023 kern.info kernel: [   11.219298] usbcore: registered new interface driver brcmfmac
Thu Feb 16 14:10:32 2023 kern.info kernel: [   11.225228] pci 0000:00:00.0: enabling device (0140 -> 0142)
Thu Feb 16 14:10:32 2023 kern.info kernel: [   11.230948] brcmfmac 0000:01:00.0: enabling device (0140 -> 0142)
Thu Feb 16 14:10:32 2023 kern.info kernel: [   11.356813] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac4366c-pcie for chip BCM4366/4
Thu Feb 16 14:10:32 2023 kern.warn kernel: [   11.365585] brcmfmac 0000:01:00.0: Direct firmware load for brcm/brcmfmac4366c-pcie.phicomm,k3.bin failed with error -2
Thu Feb 16 14:10:32 2023 kern.warn kernel: [   11.587846] brcmfmac 0000:01:00.0: Direct firmware load for brcm/brcmfmac4366c-pcie.phicomm,k3.txt failed with error -2
Thu Feb 16 14:10:32 2023 kern.warn kernel: [   11.598738] brcmfmac 0000:01:00.0: Direct firmware load for brcm/brcmfmac4366c-pcie.txt failed with error -2
Thu Feb 16 14:10:32 2023 kern.info kernel: [   11.959235] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac4366c-pcie for chip BCM4366/4
Thu Feb 16 14:10:32 2023 kern.info kernel: [   11.967978] brcmfmac: brcmf_c_process_clm_blob: no clm_blob available (err=-2), device may have limited channels available
Thu Feb 16 14:10:32 2023 kern.info kernel: [   11.979236] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4366/4 wl0: Nov  5 2018 03:19:56 version 10.28.2 (r769115) FWID 01-d2cbb8fd
Thu Feb 16 14:10:32 2023 kern.info kernel: [   11.999388] pci 0001:00:00.0: enabling device (0140 -> 0142)
Thu Feb 16 14:10:32 2023 kern.info kernel: [   12.005089] brcmfmac 0001:01:00.0: enabling device (0140 -> 0142)
Thu Feb 16 14:10:32 2023 kern.info kernel: [   12.126911] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac4366c-pcie for chip BCM4366/4
Thu Feb 16 14:10:32 2023 kern.warn kernel: [   12.135621] brcmfmac 0001:01:00.0: Direct firmware load for brcm/brcmfmac4366c-pcie.phicomm,k3.bin failed with error -2
Thu Feb 16 14:10:32 2023 kern.warn kernel: [   12.149824] brcmfmac 0001:01:00.0: Direct firmware load for brcm/brcmfmac4366c-pcie.phicomm,k3.txt failed with error -2
Thu Feb 16 14:10:32 2023 kern.warn kernel: [   12.160731] brcmfmac 0001:01:00.0: Direct firmware load for brcm/brcmfmac4366c-pcie.txt failed with error -2
Thu Feb 16 14:10:32 2023 kern.info kernel: [   12.501677] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac4366c-pcie for chip BCM4366/4
Thu Feb 16 14:10:32 2023 kern.info kernel: [   12.510431] brcmfmac: brcmf_c_process_clm_blob: no clm_blob available (err=-2), device may have limited channels available
Thu Feb 16 14:10:32 2023 kern.info kernel: [   12.521761] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4366/4 wl0: Nov  5 2018 03:19:56 version 10.28.2 (r769115) FWID 01-d2cbb8fd
Thu Feb 16 14:10:32 2023 user.info kernel: [   12.552010] kmodloader: done loading kernel modules from /etc/modules.d/*
Thu Feb 16 14:10:32 2023 user.notice dnsmasq: DNS rebinding protection is active, will discard upstream RFC1918 responses!
Thu Feb 16 14:10:32 2023 user.notice dnsmasq: Allowing 127.0.0.0/8 responses
Thu Feb 16 14:10:33 2023 daemon.info dnsmasq[1]: started, version 2.86 cachesize 150
Thu Feb 16 14:10:33 2023 daemon.info dnsmasq[1]: DNS service limited to local subnets
Thu Feb 16 14:10:33 2023 daemon.info dnsmasq[1]: compile time options: IPv6 GNU-getopt no-DBus UBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth no-cryptohash no-DNSSEC no-ID loop-detect inotify dumpfile
Thu Feb 16 14:10:33 2023 daemon.info dnsmasq[1]: UBus support enabled: connected to system bus
Thu Feb 16 14:10:33 2023 daemon.info dnsmasq[1]: using only locally-known addresses for test
Thu Feb 16 14:10:33 2023 daemon.info dnsmasq[1]: using only locally-known addresses for onion
Thu Feb 16 14:10:33 2023 daemon.info dnsmasq[1]: using only locally-known addresses for localhost
Thu Feb 16 14:10:33 2023 daemon.info dnsmasq[1]: using only locally-known addresses for local
Thu Feb 16 14:10:33 2023 daemon.info dnsmasq[1]: using only locally-known addresses for invalid
Thu Feb 16 14:10:33 2023 daemon.info dnsmasq[1]: using only locally-known addresses for bind
Thu Feb 16 14:10:33 2023 daemon.info dnsmasq[1]: using only locally-known addresses for lan
Thu Feb 16 14:10:33 2023 daemon.warn dnsmasq[1]: no servers found in /tmp/resolv.conf.d/resolv.conf.auto, will retry
Thu Feb 16 14:10:33 2023 daemon.info dnsmasq[1]: read /etc/hosts - 4 addresses
Thu Feb 16 14:10:33 2023 daemon.info dnsmasq[1]: read /tmp/hosts/dhcp.cfg01411c - 0 addresses
Thu Feb 16 14:10:33 2023 authpriv.info dropbear[1415]: Not backgrounding
Thu Feb 16 14:10:34 2023 daemon.notice wpa_supplicant[1540]: Successfully initialized wpa_supplicant
Thu Feb 16 14:10:34 2023 user.notice : Added device handler type: bonding
Thu Feb 16 14:10:34 2023 user.notice : Added device handler type: 8021ad
Thu Feb 16 14:10:34 2023 user.notice : Added device handler type: 8021q
Thu Feb 16 14:10:34 2023 user.notice : Added device handler type: macvlan
Thu Feb 16 14:10:34 2023 user.notice : Added device handler type: veth
Thu Feb 16 14:10:34 2023 user.notice : Added device handler type: bridge
Thu Feb 16 14:10:34 2023 user.notice : Added device handler type: Network device
Thu Feb 16 14:10:34 2023 user.notice : Added device handler type: tunnel
Thu Feb 16 14:10:34 2023 daemon.notice procd: /etc/rc.d/S25fastnetwork: /etc/rc.common: line 41: can't create /sys/class/net/br-lan/queues/rx-0/rps_cpus: nonexistent directory
Thu Feb 16 14:10:35 2023 user.notice ucitrack: Setting up /etc/config/dhcp reload dependency on /etc/config/network
Thu Feb 16 14:10:35 2023 user.notice ucitrack: Setting up /etc/config/network reload dependency on /etc/config/wireless
Thu Feb 16 14:10:35 2023 user.notice ucitrack: Setting up /etc/config/luci-splash reload dependency on /etc/config/firewall
Thu Feb 16 14:10:35 2023 user.notice ucitrack: Setting up /etc/config/qos reload dependency on /etc/config/firewall
Thu Feb 16 14:10:35 2023 kern.info kernel: [   16.266315] bgmac_bcma bcma0:3 eth0: Link is Up - 1Gbps/Full - flow control off
Thu Feb 16 14:10:35 2023 kern.info kernel: [   16.275290] b53-srab-switch 18007000.ethernet-switch lan1: configuring for phy/gmii link mode
Thu Feb 16 14:10:35 2023 kern.info kernel: [   16.287495] 8021q: adding VLAN 0 to HW filter on device lan1
Thu Feb 16 14:10:35 2023 user.notice ucitrack: Setting up /etc/config/miniupnpd reload dependency on /etc/config/firewall
Thu Feb 16 14:10:35 2023 kern.info kernel: [   16.346945] br-lan: port 1(lan1) entered blocking state
Thu Feb 16 14:10:35 2023 kern.info kernel: [   16.352246] br-lan: port 1(lan1) entered disabled state
Thu Feb 16 14:10:35 2023 kern.info kernel: [   16.357892] device lan1 entered promiscuous mode
Thu Feb 16 14:10:35 2023 kern.info kernel: [   16.362547] device eth0 entered promiscuous mode
Thu Feb 16 14:10:35 2023 user.notice ucitrack: Setting up /etc/config/odhcpd reload dependency on /etc/config/dhcp
Thu Feb 16 14:10:35 2023 kern.info kernel: [   16.458209] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Thu Feb 16 14:10:35 2023 daemon.notice netifd: Interface 'lan' is enabled
Thu Feb 16 14:10:35 2023 daemon.notice netifd: Interface 'lan' is setting up now
Thu Feb 16 14:10:35 2023 daemon.notice netifd: Interface 'lan' is now up
Thu Feb 16 14:10:35 2023 kern.info kernel: [   16.494317] b53-srab-switch 18007000.ethernet-switch lan2: configuring for phy/gmii link mode
Thu Feb 16 14:10:35 2023 kern.info kernel: [   16.509821] 8021q: adding VLAN 0 to HW filter on device lan2
Thu Feb 16 14:10:35 2023 user.notice ucitrack: Setting up non-init /etc/config/fstab reload handler: /sbin/block mount
Thu Feb 16 14:10:35 2023 kern.info kernel: [   16.575784] br-lan: port 2(lan2) entered blocking state
Thu Feb 16 14:10:35 2023 kern.info kernel: [   16.581102] br-lan: port 2(lan2) entered disabled state
Thu Feb 16 14:10:35 2023 kern.info kernel: [   16.586757] device lan2 entered promiscuous mode
Thu Feb 16 14:10:35 2023 user.notice ucitrack: Setting up /etc/config/system reload trigger for non-procd /etc/init.d/led
Thu Feb 16 14:10:35 2023 kern.info kernel: [   16.680269] b53-srab-switch 18007000.ethernet-switch lan3: configuring for phy/gmii link mode
Thu Feb 16 14:10:35 2023 kern.info kernel: [   16.692261] 8021q: adding VLAN 0 to HW filter on device lan3
Thu Feb 16 14:10:35 2023 user.notice ucitrack: Setting up /etc/config/luci_statistics reload dependency on /etc/config/system
Thu Feb 16 14:10:35 2023 user.notice ucitrack: Setting up /etc/config/dhcp reload dependency on /etc/config/system
Thu Feb 16 14:10:35 2023 user.notice firewall: Reloading firewall due to ifup of lan (br-lan)
Thu Feb 16 14:10:36 2023 kern.info kernel: [   16.786710] br-lan: port 3(lan3) entered blocking state
Thu Feb 16 14:10:36 2023 kern.info kernel: [   16.792001] br-lan: port 3(lan3) entered disabled state
Thu Feb 16 14:10:36 2023 kern.info kernel: [   16.797636] device lan3 entered promiscuous mode
Thu Feb 16 14:10:36 2023 daemon.notice netifd: Interface 'loopback' is enabled
Thu Feb 16 14:10:36 2023 daemon.notice netifd: Interface 'loopback' is setting up now
Thu Feb 16 14:10:36 2023 daemon.notice netifd: Interface 'loopback' is now up
Thu Feb 16 14:10:36 2023 kern.info kernel: [   16.920108] b53-srab-switch 18007000.ethernet-switch wan: configuring for phy/gmii link mode
Thu Feb 16 14:10:36 2023 kern.info kernel: [   16.930555] 8021q: adding VLAN 0 to HW filter on device wan
Thu Feb 16 14:10:36 2023 daemon.notice netifd: Interface 'wan' is enabled
Thu Feb 16 14:10:36 2023 daemon.notice netifd: Interface 'wan6' is enabled
Thu Feb 16 14:10:36 2023 daemon.notice netifd: Network device 'eth0' link is up
Thu Feb 16 14:10:36 2023 daemon.notice netifd: Network device 'lo' link is up
Thu Feb 16 14:10:36 2023 daemon.notice netifd: Interface 'loopback' has link connectivity
Thu Feb 16 14:10:36 2023 daemon.notice netifd: radio1 (2215): command failed: No error information (-524)
Thu Feb 16 14:10:36 2023 daemon.info procd: - init complete -
Thu Feb 16 14:10:37 2023 daemon.err odhcpd[1704]: Failed to send to ff02::1%lan@br-lan (Address not available)
Thu Feb 16 14:10:37 2023 daemon.notice netifd: radio1 (2215): command failed: I/O error (-5)
Thu Feb 16 14:10:38 2023 daemon.notice hostapd: Configuration file: /var/run/hostapd-phy1.conf (phy wlan1) --> new PHY
Thu Feb 16 14:10:38 2023 kern.info kernel: [   19.523827] br-lan: port 4(wlan1) entered blocking state
Thu Feb 16 14:10:38 2023 kern.info kernel: [   19.529209] br-lan: port 4(wlan1) entered disabled state
Thu Feb 16 14:10:38 2023 kern.info kernel: [   19.534729] device wlan1 entered promiscuous mode
Thu Feb 16 14:10:38 2023 daemon.notice hostapd: wlan1: interface state UNINITIALIZED->COUNTRY_UPDATE
Thu Feb 16 14:10:38 2023 daemon.notice hostapd: ACS: Automatic channel selection started, this may take a bit
Thu Feb 16 14:10:38 2023 daemon.notice hostapd: wlan1: interface state COUNTRY_UPDATE->ACS
Thu Feb 16 14:10:38 2023 daemon.notice hostapd: wlan1: ACS-STARTED
Thu Feb 16 14:10:39 2023 daemon.notice netifd: Wireless device 'radio1' is now up
Thu Feb 16 14:10:40 2023 daemon.info dnsmasq[1]: exiting on receipt of SIGTERM
Thu Feb 16 14:10:40 2023 daemon.info dnsmasq[1]: started, version 2.86 cachesize 150
Thu Feb 16 14:10:40 2023 daemon.info dnsmasq[1]: DNS service limited to local subnets
Thu Feb 16 14:10:40 2023 daemon.info dnsmasq[1]: compile time options: IPv6 GNU-getopt no-DBus UBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth no-cryptohash no-DNSSEC no-ID loop-detect inotify dumpfile
Thu Feb 16 14:10:40 2023 daemon.info dnsmasq[1]: UBus support enabled: connected to system bus
Thu Feb 16 14:10:40 2023 daemon.info dnsmasq-dhcp[1]: DHCP, IP range 192.168.2.100 -- 192.168.2.249, lease time 12h
Thu Feb 16 14:10:40 2023 daemon.info dnsmasq[1]: using only locally-known addresses for test
Thu Feb 16 14:10:40 2023 daemon.info dnsmasq[1]: using only locally-known addresses for onion
Thu Feb 16 14:10:40 2023 daemon.info dnsmasq[1]: using only locally-known addresses for localhost
Thu Feb 16 14:10:40 2023 daemon.info dnsmasq[1]: using only locally-known addresses for local
Thu Feb 16 14:10:40 2023 daemon.info dnsmasq[1]: using only locally-known addresses for invalid
Thu Feb 16 14:10:40 2023 daemon.info dnsmasq[1]: using only locally-known addresses for bind
Thu Feb 16 14:10:40 2023 daemon.info dnsmasq[1]: using only locally-known addresses for lan
Thu Feb 16 14:10:40 2023 daemon.warn dnsmasq[1]: no servers found in /tmp/resolv.conf.d/resolv.conf.auto, will retry
Thu Feb 16 14:10:40 2023 daemon.info dnsmasq[1]: read /etc/hosts - 4 addresses
Thu Feb 16 14:10:40 2023 daemon.info dnsmasq[1]: read /tmp/hosts/dhcp.cfg01411c - 1 addresses
Thu Feb 16 14:10:40 2023 daemon.info dnsmasq-dhcp[1]: read /etc/ethers - 0 addresses
Thu Feb 16 14:10:48 2023 daemon.notice hostapd: ACS: Survey is missing channel time
Thu Feb 16 14:10:48 2023 daemon.notice hostapd: ACS: Survey is missing RX and busy time (at least one is required)
Thu Feb 16 14:10:48 2023 daemon.notice hostapd: ACS: Survey is missing channel time
Thu Feb 16 14:10:48 2023 daemon.notice hostapd: ACS: Survey is missing RX and busy time (at least one is required)
Thu Feb 16 14:10:48 2023 daemon.err hostapd: ACS: Survey data missing
Thu Feb 16 14:10:48 2023 daemon.notice hostapd: ACS: Survey is missing channel time
Thu Feb 16 14:10:48 2023 daemon.notice hostapd: ACS: Survey is missing RX and busy time (at least one is required)
Thu Feb 16 14:10:48 2023 daemon.err hostapd: ACS: Survey data missing
Thu Feb 16 14:10:48 2023 daemon.notice hostapd: ACS: Survey is missing channel time
Thu Feb 16 14:10:48 2023 daemon.notice hostapd: ACS: Survey is missing RX and busy time (at least one is required)
Thu Feb 16 14:10:48 2023 daemon.err hostapd: ACS: Survey data missing
Thu Feb 16 14:10:48 2023 daemon.notice hostapd: ACS: Survey is missing channel time
Thu Feb 16 14:10:48 2023 daemon.notice hostapd: ACS: Survey is missing RX and busy time (at least one is required)
Thu Feb 16 14:10:48 2023 daemon.err hostapd: ACS: Survey data missing
Thu Feb 16 14:10:48 2023 daemon.notice hostapd: ACS: Survey is missing channel time
Thu Feb 16 14:10:48 2023 daemon.notice hostapd: ACS: Survey is missing RX and busy time (at least one is required)
Thu Feb 16 14:10:48 2023 daemon.err hostapd: ACS: Survey data missing
Thu Feb 16 14:10:48 2023 daemon.notice hostapd: ACS: Survey is missing channel time
Thu Feb 16 14:10:48 2023 daemon.notice hostapd: ACS: Survey is missing RX and busy time (at least one is required)
Thu Feb 16 14:10:48 2023 daemon.notice hostapd: ACS: Survey is missing channel time
Thu Feb 16 14:10:48 2023 daemon.notice hostapd: ACS: Survey is missing RX and busy time (at least one is required)
Thu Feb 16 14:10:48 2023 daemon.err hostapd: ACS: Survey data missing
Thu Feb 16 14:10:48 2023 daemon.notice hostapd: ACS: Survey is missing channel time
Thu Feb 16 14:10:48 2023 daemon.notice hostapd: ACS: Survey is missing RX and busy time (at least one is required)
Thu Feb 16 14:10:48 2023 daemon.err hostapd: ACS: Survey data missing
Thu Feb 16 14:10:48 2023 daemon.notice hostapd: ACS: Survey is missing channel time
Thu Feb 16 14:10:48 2023 daemon.notice hostapd: ACS: Survey is missing RX and busy time (at least one is required)
Thu Feb 16 14:10:48 2023 daemon.err hostapd: ACS: Survey data missing
Thu Feb 16 14:10:48 2023 daemon.notice hostapd: ACS: Survey is missing channel time
Thu Feb 16 14:10:48 2023 daemon.notice hostapd: ACS: Survey is missing RX and busy time (at least one is required)
Thu Feb 16 14:10:48 2023 daemon.err hostapd: ACS: Survey data missing
Thu Feb 16 14:10:48 2023 daemon.notice hostapd: ACS: Survey is missing channel time
Thu Feb 16 14:10:48 2023 daemon.notice hostapd: ACS: Survey is missing RX and busy time (at least one is required)
Thu Feb 16 14:10:48 2023 daemon.err hostapd: ACS: Survey data missing
Thu Feb 16 14:10:48 2023 daemon.notice hostapd: ACS: Survey is missing channel time
Thu Feb 16 14:10:48 2023 daemon.notice hostapd: ACS: Survey is missing RX and busy time (at least one is required)
Thu Feb 16 14:10:48 2023 daemon.notice hostapd: ACS: Survey is missing channel time
Thu Feb 16 14:10:48 2023 daemon.notice hostapd: ACS: Survey is missing RX and busy time (at least one is required)
Thu Feb 16 14:10:48 2023 daemon.notice hostapd: ACS: Survey is missing channel time
Thu Feb 16 14:10:48 2023 daemon.notice hostapd: ACS: Survey is missing RX and busy time (at least one is required)
Thu Feb 16 14:10:48 2023 daemon.notice hostapd: ACS: Survey is missing channel time
Thu Feb 16 14:10:48 2023 daemon.notice hostapd: ACS: Survey is missing RX and busy time (at least one is required)
Thu Feb 16 14:10:48 2023 daemon.notice hostapd: wlan1: ACS-COMPLETED freq=5180 channel=36
Thu Feb 16 14:10:48 2023 daemon.notice hostapd: wlan1: interface state ACS->HT_SCAN
Thu Feb 16 14:10:51 2023 kern.info kernel: [   31.904730] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
Thu Feb 16 14:10:51 2023 kern.info kernel: [   31.911253] br-lan: port 4(wlan1) entered blocking state
Thu Feb 16 14:10:51 2023 kern.info kernel: [   31.916622] br-lan: port 4(wlan1) entered forwarding state
Thu Feb 16 14:10:51 2023 daemon.notice netifd: Network device 'wlan1' link is up
Thu Feb 16 14:10:51 2023 kern.info kernel: [   31.923351] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
Thu Feb 16 14:10:51 2023 daemon.notice netifd: bridge 'br-lan' link is up
Thu Feb 16 14:10:51 2023 daemon.notice netifd: Interface 'lan' has link connectivity
Thu Feb 16 14:10:51 2023 daemon.notice hostapd: wlan1: interface state HT_SCAN->ENABLED
Thu Feb 16 14:10:51 2023 daemon.notice hostapd: wlan1: AP-ENABLED
Thu Feb 16 14:10:52 2023 daemon.err odhcpd[1704]: Failed to send to ff02::1%lan@br-lan (Address not available)
Thu Feb 16 14:10:52 2023 daemon.info dnsmasq[1]: read /etc/hosts - 4 addresses
Thu Feb 16 14:10:52 2023 daemon.info dnsmasq[1]: read /tmp/hosts/dhcp.cfg01411c - 1 addresses
Thu Feb 16 14:10:52 2023 daemon.info dnsmasq-dhcp[1]: read /etc/ethers - 0 addresses
Thu Feb 16 14:12:42 2023 daemon.info hostapd: wlan1: STA 74:e5:f9:c9:79:5d IEEE 802.11: associated
Thu Feb 16 14:12:42 2023 daemon.notice hostapd: wlan1: AP-STA-CONNECTED 74:e5:f9:c9:79:5d
Thu Feb 16 14:12:42 2023 daemon.info hostapd: wlan1: STA 74:e5:f9:c9:79:5d WPA: pairwise key handshake completed (RSN)
Thu Feb 16 14:12:42 2023 daemon.notice hostapd: wlan1: EAPOL-4WAY-HS-COMPLETED 74:e5:f9:c9:79:5d
Thu Feb 16 14:12:42 2023 daemon.info dnsmasq-dhcp[1]: DHCPREQUEST(br-lan) 192.168.2.119 74:e5:f9:c9:79:5d
Thu Feb 16 14:12:42 2023 daemon.info dnsmasq-dhcp[1]: DHCPACK(br-lan) 192.168.2.119 74:e5:f9:c9:79:5d pop-os
Thu Feb 16 14:12:44 2023 daemon.info dnsmasq[1]: read /etc/hosts - 4 addresses
Thu Feb 16 14:12:44 2023 daemon.info dnsmasq[1]: read /tmp/hosts/dhcp.cfg01411c - 1 addresses
Thu Feb 16 14:12:44 2023 daemon.info dnsmasq[1]: read /tmp/hosts/odhcpd - 1 addresses
Thu Feb 16 14:12:44 2023 daemon.info dnsmasq-dhcp[1]: read /etc/ethers - 0 addresses
Thu Feb 16 14:13:02 2023 authpriv.info dropbear[2927]: Child connection from 192.168.2.119:44670
Thu Feb 16 14:13:05 2023 authpriv.info dropbear[2927]: Exit before auth from <192.168.2.119:44670>: (user 'root', 0 fails): Exited normally
Thu Feb 16 14:13:11 2023 user.info : luci: accepted login on /admin/status/logs for root from 192.168.2.119

Bill · February 17, 2023, 11:29am

Thanks for the Git Directions.

Have you considered and or even know that you too can join to edit the Wiki?

Good job on the markup and pictures and I hope some member can address the WAN port issue in the near future.

hecatae · February 17, 2023, 11:46am

@tjfigueiredo thanks for the write up, does the WAN issue happen on all Openwrt releases or only 22.03.3?

I have two Quantum DAX here, but neither are using 22.03.3, my WAN ports on both work.

tjfigueiredo · February 17, 2023, 11:50am

It's my goal to do so, but I was trying to fix all the problems and make a more "final" version of the docs before doing it.

tjfigueiredo · February 17, 2023, 11:54am

Tried also with 21.02.5, 19.07.10 and SNAPSHOT. I'm starting to assume that it should be a problem in the physical port...

Want to thank you for the comments in other posts that helped me a lot figuring out how to do this installation!

hecatae · February 17, 2023, 12:04pm

Did the port work on stock firmware?

Bill · February 17, 2023, 12:11pm

Seems he posted this at the OP.

hecatae · February 17, 2023, 12:30pm

There's 5 versions of the K3,
The Quantum Dax is believed to be the Phicomm K3 D1, but if Wavlink are just reflashing any boards they get and putting them in DAX shells, this could be a different model number.

If @tjfigueiredo is willing to install stock firmware then we could check if the WAN port works.

tjfigueiredo · February 17, 2023, 12:38pm

Hmm, interesting... Didn't know about the 5 versions.

I don't know if I'll have time to do so in a near future, but it'll be in my TODO list and I'll get back here with updates when done

infor69 · February 17, 2023, 9:58pm

Thanks for the guide
Obrigado pelo guia que criaste no github. Também comprei o router pela possibilidade de instalar o openwrt.
Posso testar a porta wan antes e depois de instalar o openwrt se quiseres. Mas também acredito que seja um problema físico da porta do teu router. Diz-me uma coisa. É preciso soltar alguma coisa na pcb para ligar lá o adaptador USB ttl?

hecatae · February 18, 2023, 12:44am

The forum prefers every post to be in English.

What do you require regarding the PCB?

infor69 · February 18, 2023, 9:35am

Is necessary soldering some pins on pcb to connect the dupont connectors of the ttl adapter?

hecatae · February 18, 2023, 9:49am

You don't need to, mine were held down with a clothes peg.

infor69 · February 18, 2023, 1:33pm

My wan port works with stock firmware and Now with openwrt. Your router maybe have some problem in the hardware. Now its time to test openwrt and Probably make some changes

tjfigueiredo · February 18, 2023, 2:54pm

Hi,

(Answering in english for other people context)

You don't need to solder it, I just got mine connected using something "kind of" heavy on the cables, just to assure it's connected. You just need to make sure it's firmly connected, otherwise you'll only have some scrambled characters on your screen (or nothing at all).

infor69 · February 18, 2023, 6:37pm

I have found an usb pin header connector and break to take the "pins" and inserted in the female dupond connectors of the ttl adapter and in the holes of the pcb and flashed successfully.