Update hardwaredata, missing vendor pages

Could someone create the missing (in red) pages at https://openwrt.org/toh/hwdata/start ?
I'm allowed to add them, but there's no template, and the exisiting ones can't be viewed,
so I don't know what the content should be :frowning:

Was primary going to edit the Dynalink, Qnap and Reyee pages.


I created Dynalink, does this look right?

1 Like

Yes it does,

thank you very much.

Now the techdata pages can be modifed, to contain the correct speeds for the ethernet ports

Besides the indexpages for the hwdata pages, please also create in parallel the indexpages for the devicepages, e.g. https://openwrt.org/toh/dynalink/start

As template for both, hwdata and devicepages, I usually take the respective pages for D-Link. No special reason, just easy to remember for me :slight_smile:


1 Like

OK - techdata is done, I'm on the devicepages now.
@tmomas I think you made a small mistake in the Dynalink page at https://openwrt.org/toh/dynalink/start, is my change fine or should I have replaced D-Link by Dynalink?

Dynalink != D-Link, or did you mean something else ?

I know that, please see the last change at https://openwrt.org/toh/dynalink/start?rev=1678140010&do=diff

Well spotted!
The * can lead to problems though, therefore query for the brand name instead.
I have done this now with https://openwrt.org/toh/dynalink/start?do=diff&rev2[0]=1678140529&rev2[1]=1678143269&difftype=sidebyside

OK, I'll update the rest. But, why is this only done for the techdata pages and not for the device pages? The devicepage query still has (and had) an asterisk...

Because querying specifically the hwdata namespace with "*" will lead to problems.
No problems with the devicepage namespaces.