UF896 - Qualcomm MSM8916 LTE router ~384MiB RAM/2.4GiB flash, Android: OpenWrt?

[wackejohn]

@jackadam1981

Very interested

So, mailbox or other contact ?

[fbataill]

Not possible to put it on a github?

[Kioto]

Unfortunately I have no idea about compilation, so I'm stucked. Thus I think the only thing to do is hoping to find a stock Android firmware 100% capable with my ufi001b and use it with that only. I mean I'd like openwrt but I realized it's really beyond my current knowledges how to get the modem working. I'm trying but.......... no hope

[Andrew33]

Hi all. I have new revision of msm8916 modem. And I want to install OpenWRT to it. But I don't know which version is right for me.
Modem details:
motherboard - HMUF02-V05
CPU - MSM8916
RAM - Samsung KMF5X0005C-B211 (4Gb+512Mb)
modem - WTR1605L
Wi-Fi - WCN3620
web interface SW - UFI_HM_SIM1_V010_230615.

[Andrew33]

Back side

[evgenii_n]

Yes, I`ve got the same device and the same questions

[markSilv]

Hello, i have the dongle 4g lte, the mainboard is uz801...when i run the open wrt firmare, my device briked, aparentily it no have botable partiton, the lights don't turn on...i uploaded the picture from the process updating

I downloaded the firmware in https://vb4jy-my.sharepoint.com/personal/share_vb4jy_onmicrosoft_com/_layouts/15/onedrive.aspx?ga=1&id=%2Fpersonal%2Fshare_vb4jy_onmicrosoft_com%2FDocuments%2Fufi_rom%2Fopenwrt%2F2023-08-02
i

[markSilv]

i did change the original firmware finale, but now, the dongle don't recognize the sim...anyone have this problem?

[shashankx86]

Hi,

If you have the time, could you please guide me in building OpenWrt for my device (JMR540)?
it seems like my device similar to your

All details are here:

Help with Building OpenWrt for JMR540 / JioFi 3

Hi, Is there any guide I can follow to build for my device (read docs, but its fricking hard) Device: JMR540 (or JioFi 3) CPU: there no CPU on board just a mem chip, MDM9207 and IC's Type: LTE/GSM router I have been working on a project: At first idea was to add custom binary into stock firmware, but installing deps driving me crazy So, i decided to build Openwrt for it Stock Firmware: https://github.com/ExtendedFi/JMR540_Firmware /proc Dump: https://github.com/ExtendedFi/JMR540_proc_D…

@dreieck

[markSilv]

hi, anyone know how can i enable this?

phisicaly on my device aparentily all things working.

[AVIA_Ukraine]

Hello. I have exactly such a device. You can suggest the version of openwrt that will suit it. tried versions UFI003, UFI001, but the modem does not work in them. Maybe I don't know how to turn it on?

[AVIA_Ukraine]

ModemManager

try to go to config and fix the lowpower parameter. It might work. Although I think the problem is a different GPIO pinout

[markSilv]

thanks, i did this but not work

[BlueHeisenberg]

I have the same issue, did you manage to fix it?

[davidbuzz]

I've got this one, just arrived from china... any hope?

more info, and a few adb shell commands here:

is this board supported? box label: Model U96

[davidbuzz]

[davidbuzz]

Can anyone help me identify this board? in the photo's above? the only thing on the PCB is a 'JP20230922-D' that looks like it's manufactured/printed on 22nd Sept 2023, ie within the last couple of months.?

[antenna wire was my work , ignore]

[markSilv]

i didn't fix it...my dongle still isn't working

[avolkov-1221]

Have you flashed the original backup? Or downloaded from somewhere? Since "persist", "modems*", "fsg" are critical and unique for each dongle. They contains calibration and some modem related data.

[markSilv]

hi, yes, if i flashed the original rom, this dongle work, but from openwrt version don't conect 3g/4g