Tp-link AX23 wrong firmware version number after reverting

Installing and Using OpenWrt
160

I see there is a language barrier here.

Smakib if by chance your language is hindi, since you got a US device which is sold in south asia, let me know.

161

who knows what damage @smakib01 has done to their US hardware by installing EU firmware, it's not resetting so there's probably something overwritten that should not have been, so I do not know if what is stored on the specific blocks they have would be any use to anyone else as they have a factory reset issue.

1 Like
162

It was all frolic, I did almost nothing. :heart:

163

Really ?
I see pure spoon feeding :slight_smile:

1 Like
164

np, thank you for verifying it.

2 Likes
165

Lmao, potato potato.

That doesn't really work online, does it? Imagine I said it like it's supposed to be.

166

it does, if someone's holding the spoon ... :wink:
it's not going to be me though.

167

Here comes the airplane...

Anyway, have we got a proven solution for EU AX23s?

168

LOL

So it would seem, yes.
Still need to verify it for the other regions.

171

When I was revert us firmware from openwrt...the reset was not working on that time..but when I go back to openwrt again...the reset is working on openwrt firmware

172

Hnmm, what region firmware you have currently? Go back to us

173

Okay then???flash openwrt ?? Then???

174

Let's not fill this thread with one step per message.

Answer my last question and I'll answer and guide you in one message.

175

Okay tell me all steps in one message ..

176

First tell me what region are you currently on? US or EU? I told you to go back to US.

177

I am on EU..my router is us version.I will go to us firmware ..then flash openwrt ? Right?
Or first go to openwrt then revert to us stock..

Then ?

178

You can't reflash stock from stock firmware. How did you install EU from US stock firmware after you reverted from openwrt.

What language do you speak? Use a Google translate if need be.

179

My language is Bangla...I know little english.
Okay I will go openwrt at first then I will be able to flash us firmware with TP-Linksafeloader openwrt upgrade support firmware...then?

180

Then you will go back to openwrt.

Then run the following

dd of=/tmp/a if=/dev/mtd6 skip=198673 count=11 bs=1

cat /tmp/a

Then you will show me the output.

Credit to frollic for the above by the way.

181

Do I need to run this command with putty software??