Support for TL-MR3420 v3

[s_nakamoto]

Challenge: TL-MR3420 v3 is currently unsupported.

To whom it may concern:

Please consider supporting a viable solution that supports OpenWrt to run on TL-MR3420 v3.
I would like to pose the possibility of changing the default USB modem port into a USB expansion port that will facilitate a USB hub. The goal is to be able mount / unmount / mv the primary kernal directory onto an external hard drive or flash drive. Of course we will need to facilitate hardware driver compatibility that auto-detects the USB hub and automatically reserves two USB ports on the hub - one for the modem and the the other for the external HD.

I am just thinking out loud. I have done no research on this whatsoever. I would just like to know if this is possible.

Satoshi

[lleachii]

TP-Link TL-MR3420 & TL-MR3220

Listed as unsupported. Do you have the following information?

@lleachii

Are you willing to open it up and search for a 4-pin TTL serial port???

An SSH server can also be enabled on this device...but using serial, we can look at the bootloader from power on.

We need to determine mainly:

• CPU
• Memory
• Flash Chip
• Wireless
• Switch Chip

Photographs are good too.

[eddie1]

Mine is using the patch from this thread. It works but I only tested it with LEDE

TP-Link TL-MR-3420 V3 Build

Actually, I don't have this router but I try build the firmware using this patch > http://lists.infradead.org/pipermail/lede-dev/2016-November/003782.html I think you should be try