Status system little bug?

Hi

is this a little bug?
/dev/sda1 (mnt/sda1) with 0% and no showing.

Thanks
Wolle

what do you mean by "no showing", it's right there ?

0% is also correct, 100MiB of 110GiB is about 0% :slight_smile:

2 Likes

Hi frollic,

It's the "Balken" in german.

in this picture, we have 0.09% it's O.K.
Or is the diff. to little?

Thanks
Wolle

So you'd expect a tiny bit of blue in the bar because of the 0.09%?

Technically, that would be possible. This is how 0.09% look like (I edited the site source code in the debugger to show the status bar with 0.09% - I did not change any value):

image

However, it seems that the value is rounded, I have 0.15% connections in use and the interface turns it into 0.00%.

image

1 Like

Hi andyboeh,
I understand.

Thanks
Wolle

If your problem is solved, please consider marking this topic as [Solved]. See How to mark a topic as [Solved] for a short how-to.
Thanks! :slight_smile:

This topic was automatically closed 10 days after the last reply. New replies are no longer allowed.