Folder appears un-indexed (hidden) at this time...but...
Some devices may not have yet been built. Have patience, the hamsters powering the build boxes are running as fast as they can.
7 Likes
Really excited for this, it's been ages!
Anyone know if there is any updated install guide/documentation? The main web page www.openwrt.org looks like it hasn't been updated since 2015 
Asking because currently running davidc502's build on my WRT32X and would love to start from scratch and try out the stable release but would need the newest mwlwifi drivers too.
by the time it's done they should name it 18.08
Found the mvebu build yesterday and upgraded from 17.01.3 for linksys wrt1900ac_v1, works smoothly and the new wifi driver is definitely a lot better.
The old look of the website was an explicit requirement for the openwrt-lede merge by some old devs who controlled the openwrt.org domain. So it looks like in 2011...
1 Like
No official announcement yet, but I just flashed my Archer C7 v2 from 18.06RC2 to this one successfully.
Understood, mainly I meant no mention of a big new release, no installation guide, etc. Wish there was something I could help out writing if it got neglected.
Well, the release is not yet officially released, so no wonder that there is no big announcement on the front page, yet. We should not jump the gun.
But apparently a larger release info page is being prepared behind the scenes: https://openwrt.org/releases/18.06/notes-18.06.0
For most devices there is no need for any special installation instructions or such.
1 Like
I had a problem with 18.06 on mvebu wrt1200ac. I couldnt log in into luci before and after I set the password. After I installed luci-ssl it worked.
If you were using SSL on the old build, it could be because your browser cache insists on redirecting to https. Clear the cache.
1 Like
Clean 18.06 installed this morning on WRT1900ACS, working great so far.
I have 18.06 Running on a TP-Link TL-WDR3600. So far so good. The LUCI web interface has a few changes and is a little more colorful than previous releases I have used.
Netgert R6100 can not find 802.11ac in Wireless Setting with 18.06,but 17.01.4 have,Please help
@jow Why didn't you bump kernel before the release?
sit is broken now in the 4.9 kernel. But upstream fix it long ago enough. Just the next kernel 4.9.112.
Lack of time. WIll happen with .1
Sorry，I don`t konw what dmesg is.But I find this in my Kernel Log.
[ 13.542380] PCI: Enabling device 0000:00:00.0 (0000 -> 0002)
[ 13.548353] ath10k_pci 0000:00:00.0: pci irq legacy oper_irq_mode 1 irq_mode 0 reset_mode 0
[ 13.820612] ath10k_pci 0000:00:00.0: Direct firmware load for ath10k/pre-cal-pci-0000:00:00.0.bin failed with error -2
[ 13.831507] ath10k_pci 0000:00:00.0: Falling back to user helper
[ 13.994166] firmware ath10k!pre-cal-pci-0000:00:00.0.bin: firmware_loading_store: map pages failed
[ 14.003637] ath10k_pci 0000:00:00.0: Direct firmware load for ath10k/cal-pci-0000:00:00.0.bin failed with error -2
[ 14.014180] ath10k_pci 0000:00:00.0: Falling back to user helper
[ 14.219926] firmware ath10k!cal-pci-0000:00:00.0.bin: firmware_loading_store: map pages failed
[ 14.229054] ath10k_pci 0000:00:00.0: Direct firmware load for ath10k/QCA988X/hw2.0/firmware-6.bin failed with error -2
[ 14.239953] ath10k_pci 0000:00:00.0: Falling back to user helper
[ 14.442011] firmware ath10k!QCA988X!hw2.0!firmware-6.bin: firmware_loading_store: map pages failed
[ 14.467268] ath10k_pci 0000:00:00.0: qca988x hw2.0 target 0x4100016c chip_id 0x043222ff sub 0000:0000
[ 14.476637] ath10k_pci 0000:00:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 1
[ 14.491121] ath10k_pci 0000:00:00.0: firmware ver 10.2.4-1.0-00033 api 5 features no-p2p,raw-mode,mfp,allows-mesh-bcast crc32 c41417d0
[ 14.577145] ath10k_pci 0000:00:00.0: Direct firmware load for ath10k/QCA988X/hw2.0/board-2.bin failed with error -2
[ 14.587785] ath10k_pci 0000:00:00.0: Falling back to user helper
[ 14.694507] firmware ath10k!QCA988X!hw2.0!board-2.bin: firmware_loading_store: map pages failed
[ 14.731020] ath10k_pci 0000:00:00.0: board_file api 1 bmi_id N/A crc32 bebc7c08
[ 14.885766] ath10k_pci 0000:00:00.0: otp calibration failed: 2
[ 14.891724] ath10k_pci 0000:00:00.0: failed to run otp: -22
[ 14.897399] ath10k_pci 0000:00:00.0: could not init core (-22)
[ 14.903428] ath10k_pci 0000:00:00.0: could not probe fw (-22)
@Willen Thanks. I've ordered an R6100 now and will investigate once it arrived. Consider downgrading to LEDE 17.01.5 and wait until 18.06.1 for the issue to be fixed.
I found the same errors in my Archer C5, but everything is working as far as I could test.
[ 11.665601] PCI: Enabling device 0000:01:00.0 (0000 -> 0002)
[ 11.671536] ath10k_pci 0000:01:00.0: pci irq legacy oper_irq_mode 1 irq_mode 0 reset_mode 0
[ 11.950693] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/pre-cal-pci-0000:01:00.0.bin failed with error -2
[ 11.961577] ath10k_pci 0000:01:00.0: Falling back to user helper
[ 12.030559] firmware ath10k!pre-cal-pci-0000:01:00.0.bin: firmware_loading_store: map pages failed
[ 12.041724] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/QCA988X/hw2.0/firmware-6.bin failed with error -2
[ 12.052613] ath10k_pci 0000:01:00.0: Falling back to user helper
[ 12.198141] firmware ath10k!QCA988X!hw2.0!firmware-6.bin: firmware_loading_store: map pages failed
[ 12.211534] ath10k_pci 0000:01:00.0: qca988x hw2.0 target 0x4100016c chip_id 0x043202ff sub 0000:0000
[ 12.220927] ath10k_pci 0000:01:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 1
[ 12.233943] ath10k_pci 0000:01:00.0: firmware ver 10.2.4-1.0-00033 api 5 features no-p2p,raw-mode,mfp,allows-mesh-bcast crc32 c41417d0
[ 12.330779] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/QCA988X/hw2.0/board-2.bin failed with error -2
[ 12.341413] ath10k_pci 0000:01:00.0: Falling back to user helper
[ 12.413818] firmware ath10k!QCA988X!hw2.0!board-2.bin: firmware_loading_store: map pages failed
[ 12.423058] ath10k_pci 0000:01:00.0: board_file api 1 bmi_id N/A crc32 bebc7c08
[ 13.522272] ath10k_pci 0000:01:00.0: htt-ver 2.1 wmi-op 5 htt-op 2 cal file max-sta 128 raw 0 hwcrypto 1