I do not want to provide pre-compiled images because everyone has their own needs and some packages require specific kernel modules. Since my source code is different from Openwrt's build server's, you will see errors like this if you install such packages via opkg install
The installed version of package kernel is not compatible, require 5.4.117-1-8f820b1b… while 5.4.113-1-7fc72863… is installed.
meaning: you should select all software packages you need during compile time.
That is not something I can help with. I use the built-in functions provided by Openwrt to set up network devices, and if these functions are broken, you should report bugs to Openwrt devs instead.
Hello, friends. I read this thread to the end, but I could not find a solution to my problem. Help me figure out the firmware of the Orange Pi R1 Plus. OpenWRT not see the USB-modem HILINK LTE. I tried a lot of different firmwares, but no success.
That is because the default config does not contain any USB Ethernet drivers (except the onboard RTL8153B). You will need to figure out the driver for the dongle, enable it and recompile your own firmware.
As the R1 Plus is not upstreamed yet, you cannot just download the driver via opkg and hope it will work. Compile from source code is required.
Thank you very much for your advice!
Please help me to do this.
My knowledge is not enough to do this.
Do I need to install an additional driver?
I don't really know how to do this.
with minimal configuration (only uhttpd, openvpn and docker) . The fwd runs well, but the filesystem seems has problem with only a few MB free ( i use sdcard 16gb)
I found a video clip where a man made friends with a modem and an Orange Pi R1 Plus. In the description of the video, the firmware is attached. I installed it, but the modem didn't even turn on. Here is the video: https://www.youtube.com/watch?v=jI1CBzbU340
Friends, please help me fix the firmware to work with the modem!