Hello at all,
I've got some WNDAP360 AccessPoint here with OpenWrt SNAPSHOT r6350-175b262328 Firmware on it.
I want to do a Mesh Network with them.
I already got to configure the Mesh Interface and all AccessPoint are connecting to each other.
This is my actual network connection. Everything is working fine. No error Messages at all.
What I need and want to do is the following thing:
When I now conenct the secund AccessPoint I got a lot of messages like:
kern.warn kernel: [ 3829.727147] br-LAN: received packet on wlan0 with own address as source address
What do I need to do that I can do a "Full Mesh"?
I already tried to activate STP.. Without any changes...
Config of AP1:
root@04-A1-51-92-E9-C1:/# cat /etc/config/network
config interface 'LAN'
option proto 'static'
option ipaddr '172.21.0.63'
option netmask '255.255.255.0'
option type 'bridge'
option _orig_ifname 'eth0.110'
option _orig_bridge 'true'
option ifname 'eth0.110'
config interface 'loopback'
option ipaddr '127.0.0.1'
option ifname 'lo'
option netmask '255.0.0.0'
option proto 'static'
root@04-A1-51-92-E9-C1:/# cat /etc/config/wireless
config wifi-device 'radio0'
option channel '11'
option country 'DE'
option disabled '0'
option htmode 'HT20'
option hwmode '11g'
option path 'pci0000:00/0000:00:11.0'
option type 'mac80211'
option legacy_rates '1'
config wifi-iface
option device 'radio0'
option mode 'mesh'
option mesh_id 'mesh.guenthart.intern'
option mesh_fwding '1'
option encryption 'none'
option network 'LAN'
Config of AP2:
root@04-A1-51-92-E8-61:/# cat /etc/config/network
config interface 'LAN'
option proto 'static'
option ipaddr '172.21.0.64'
option netmask '255.255.255.0'
option type 'bridge'
option _orig_ifname 'eth0.110'
option _orig_bridge 'true'
option ifname 'eth0.110'
config interface 'loopback'
option ipaddr '127.0.0.1'
option ifname 'lo'
option netmask '255.0.0.0'
option proto 'static'
root@04-A1-51-92-E8-61:/# cat /etc/config/wireless
config wifi-device 'radio0'
option channel '11'
option country 'DE'
option disabled '0'
option htmode 'HT20'
option hwmode '11g'
option path 'pci0000:00/0000:00:11.0'
option type 'mac80211'
option legacy_rates '1'
config wifi-iface
option device 'radio0'
option encryption 'none'
option mode 'mesh'
option mesh_fwding '1'
option mesh_id 'mesh.guenthart.intern'
option network 'LAN'
Config of AP3:
root@04-A1-51-92-E9-E1:/# cat /etc/config/network
config interface 'VLAN110'
option proto 'static'
option ipaddr '172.21.0.65'
option netmask '255.255.255.0'
option type 'bridge'
option _orig_ifname 'eth0.110'
option _orig_bridge 'true'
option ifname 'eth0.110'
config interface 'loopback'
option ipaddr '127.0.0.1'
option ifname 'lo'
option netmask '255.0.0.0'
option proto 'static'
root@04-A1-51-92-E9-E1:/# cat /etc/config/wireless
config wifi-device 'radio0'
option channel '11'
option disabled '0'
option htmode 'HT20'
option hwmode '11g'
option path 'pci0000:00/0000:00:11.0'
option type 'mac80211'
option country 'DE'
option legacy_rates '1'
config wifi-iface
option device 'radio0'
option encryption 'none'
option mode 'mesh'
option mesh_id 'mesh.guenthart.intern'
option mesh_fwding '1'
option network 'VLAN110'
I don't know if it's important:
The APs are connected to a configurable Switch (Enterasys C3G124-24P).
Thanks for helping
Greetings
superwinni2