Hi. Easy question. Just too hard for me because I’m kind of stupid. So I changed the default LAN address to access the router GUI from 192.168.1.1 to 10.36.1.1 (let’s just say that it was this address). Aside from this MR8300 router that I have which has OpenWRT installed, I have the providers rout…

LuCI has some kind of failsafe that probes for connectivity. The easiest way to achieve what you want would be to do this (given that your LAN IP is 192.168.1.1): # sed -i 's|192.168.1.1|10.36.1.1|' /etc/config/network # /etc/init.d/network restart Then disconnect your client if your router hasn't…

Lost connectivity to OpenWrt GUI

Installing and Using OpenWrt

16F84 July 7, 2021, 10:29am 6

No you can still go back. 3x10 method.

Here's another thread on the MR8300.