Testing discussion continue from this topic:
I've had some issues with occasional "drops" using 802.11sd mesh with two units. Additionally I've tried to setup a VSSID to add an available 5GHz network in as I'm using the 5GHz radio for the mesh backbone but it seems to create significant instability on both the mesh and the 5GHz network.
Completed benchmark testing with router and wireless client bridge mode.
I am also going to try mesh next, will see how it goes.
Here you can see in general openwrt on velop WHW01 performed pretty good, with wireless client bridge causing most performance loss, will test mesh to compare.
PC ---wire--> master_router ---wire---> iperf3_server
949 Mbits/sec
PC ---wifi(5ghz,2m)--> master_router ---wire---> iperf3_server
520 Mbits/sec
PC ---wire--> openwrt_velop ---wire--> master_router ---wire---> iperf3_server
603 Mbits/sec
PC ---wifi(5ghz,2m)--> openwrt_velop ---wire--> master_router ---wire---> iperf3_server
410 Mbits/sec
PC ---wire--> openwrt_velop ---wifi_client_bridge(5ghz,10m)---> master_router ---wire---> iperf3_server
160 Mbits/sec
PC ---wire--> openwrt_velop_iperf3_server
777 Mbits/sec
openwrt_velop ---wire---> master_router ---wire---> iperf3_server
943 Mbits/sec
openwrt_velop ---wifi_client_bridge(5ghz,10m)---> master_router ---wire---> iperf3_server
370 Mbits/sec
I found some problems with the original WHW01 support, and could use your help... 