Also - please paste the fulll output of:
ifconfig
to be safe, edit your /etc/config/network and set the ip to 192.168.2.1 in the
config interface 'lan' section.
1 Like
i will hardcode the output since i cannot paste from the pc to here (vga)
1 Like
i cannot set to 2.1 is already taken but will set to other ip
If your Intel is recognized, where is it?
Taken where?
1 Like
excuse me but what is the command to see mac and ip and adapter name at the same time? ifconfig shows ip lspci shows pci device name im trying to figure by mac what device is lan or wan because i switched cables and still no internet and theorically if i switched of cables i could get at least opkg update sucessfull and it is not the case here
If you indeed have the drivers installed: ifconfig
ifconfig is not showing an Intel NIC. You are mistaken.
You only have 1 NIC (LAN) properly installed at this time, you need 2 (LAN and WAN).
Correct. But please note - seeing your device listed when running lspci doesn't mean the drivers are successfully installed. This command merely provides device information as seen on the PCI bus.
Maybe it'll help if you showed us the output of the lspci command.
i am on it thank you for your kind support
1 Like
Are you sure kmod-e1000e was included in your build as well?
onfiguring kmod-mii.
Configuring kmod-sis900.
Configuring kmod-natsemi.
Configuring libnl-tiny1.
Configuring libubox20230523.
Configuring libuci20130104.
Configuring libubus20230605.
Configuring libiwinfo-data.
Configuring libiwinfo20230701.
Configuring iwinfo.
Configuring libpthread.
Configuring librt.
Configuring libuuid1.
Configuring libf2fs6.
Configuring mkf2fs.
Configuring e100-firmware.
Configuring kmod-e100.
Configuring kmod-crypto-gf128.
Configuring libuclient20201210.
Configuring uclient-fetch.
Configuring opkg.
Configuring kmod-nls-base.
Configuring kmod-usb-core.
Configuring libjson-c5.
Configuring libblobmsg-json20230523.
Configuring ubusd.
Configuring ubus.
Configuring iw.
Configuring kmod-crypto-hash.
Configuring kmod-crypto-null.
Configuring kmod-crypto-aead.
Configuring kmod-crypto-manager.
Configuring busybox.
Configuring kmod-crypto-hmac.
Configuring kmod-crypto-sha512.
Configuring kmod-crypto-rng.
Configuring kmod-crypto-seqiv.
Configuring kmod-crypto-ctr.
Configuring libpci.
Configuring kmod-nfnetlink.
Configuring kmod-nf-reject.
Configuring kmod-nf-reject6.
Configuring kmod-nf-conntrack.
Configuring kmod-nf-conntrack6.
Configuring kmod-nf-nat.
Configuring kmod-nf-log.
Configuring kmod-nf-log6.
Configuring kmod-crypto-crc32c.
Configuring kmod-lib-crc32c.
Configuring kmod-nft-core.
Configuring kmod-nft-fib.
Configuring kmod-lib-crc-ccitt.
Configuring kmod-via-velocity.
Configuring kmod-nf-flow.
Configuring getrandom.
Configuring libucode20230711.
Configuring ucode.
Configuring ucode-mod-ubus.
Configuring r8169-firmware.
Configuring kmod-slhc.
Configuring kmod-ppp.
Configuring kmod-pppox.
Configuring kmod-pppoe.
Configuring procd-ujail.
Configuring jshn.
Configuring netifd.
Configuring jsonfilter.
Configuring usign.
Configuring openwrt-keyring.
Configuring ubox.
Configuring fstools.
Configuring fwtool.
Configuring base-files.
Configuring pciids.
Configuring kmod-input-core.
Configuring ucode-mod-uci.
Configuring libblkid1.
Configuring libsmartcols1.
Configuring partx-utils.
Configuring libmbedtls12.
Configuring libustream-mbedtls20201210.
Configuring kmod-libphy.
Configuring kmod-phy-realtek.
Configuring kmod-mdio-devres.
Configuring kmod-r8169.
Configuring kmod-nft-nat.
Configuring kmod-nft-offload.
Configuring libmnl0.
Configuring libnftnl11.
Configuring jansson4.
Configuring nftables-json.
Configuring ucode-mod-fs.
Configuring firewall4.
Configuring zlib.
Configuring libkmod.
Configuring pciutils.
Configuring dnsmasq.
Configuring libjson-script20230523.
Configuring procd.
Configuring wireless-regdb.
Configuring kmod-cfg80211.
Configuring kmod-crypto-cmac.
Configuring kmod-crypto-ccm.
Configuring kmod-crypto-ghash.
Configuring kmod-crypto-gcm.
Configuring hostapd-common.
Configuring kmod-mac80211.
Configuring kmod-rtl8xxxu.
Configuring kmod-8139cp.
Configuring kmod-nls-cp437.
Configuring kmod-nls-iso8859-1.
Configuring kmod-nls-utf8.
Configuring kmod-fs-vfat.
Configuring grub2-bios-setup.
Configuring odhcp6c.
Configuring uci.
Configuring dropbear.
Configuring mtd.
Configuring odhcpd-ipv6only.
Configuring procd-seccomp.
Configuring urandom-seed.
Configuring libcomerr0.
Configuring ppp.
Configuring logd.
Configuring kmod-pps.
Configuring kmod-ptp.
Configuring kmod-tg3.
Configuring kmod-ne2k-pci.
Configuring kmod-8139too.
Configuring kmod-pcnet32.
Configuring libss2.
Configuring libext2fs2.
Configuring e2fsprogs.
Configuring kmod-e1000.
Configuring ca-bundle.
Configuring kmod-forcedeth.
Configuring kmod-3c59x.
Configuring kmod-via-rhine.
Configuring kmod-button-hotplug.
Configuring urngd.
Configuring ppp-mod-pppoe.
here is the make image
make image PROFILE="generic" PACKAGES="kmod-8139too pciutils kmod-8139cp kmod-phy-realtek kmod-rtl8xxxu kmod-tg3" FILES="" DISABLED_SERVICES=""
Building images for x86 - Generic x86
Packages: kmod-8139too pciutils kmod-8139cp kmod-phy-realtek kmod-rtl8xxxu kmod-tg3 base-files busybox ca-bundle dnsmasq dropbear e2fsprogs firewall4 fstools grub2-bios-setup kernel kmod-3c59x kmod-8139too kmod-button-hotplug kmod-e100 kmod-e1000 kmod-forcedeth kmod-fs-vfat kmod-natsemi kmod-ne2k-pci kmod-nft-offload kmod-pcnet32 kmod-r8169 kmod-sis900 kmod-tg3 kmod-via-rhine kmod-via-velocity libc libgcc libustream-mbedtls logd mkf2fs mtd netifd nftables odhcp6c odhcpd-ipv6only opkg partx-utils ppp ppp-mod-pppoe procd procd-seccomp procd-ujail uci uclient-fetch urandom-seed urngd
Package list missing or not up-to-date, generating it.
still ifconfig not showing more than eth0 and if i can recall eth0 was the intel nic on the motherboard, so realtek is not showing
Let's try again one more time.
Install: kmod-e1000e. You only have kmod-e1000 (i.e. no e) listed.
Incorrect. The installed MAC address was non-Intel.
1 Like
make image PROFILE="generic" PACKAGES="kmod-8139too pciutils kmod-8139cp kmod-phy-realtek kmod-rtl8xxxu kmod-tg3 kmod-e1000e" FILES="" DISABLED_SERVICES=""
im on it
bingo! e1000e did the job eth1 showing on the console
1 Like
So now you have two ports, one lan, one wan.
2 Likes
and opkg is working my dear similar nickname namesake!! im happy i was on it from since 1 week thank you for everyone now i have other question, should i create other ticket? (it was related shadowsocks, where i live there is heavy traffic throttling and censorship, im not a front liner but i just need to dont get my torrent traffic throttled and found cloaking as html may work
1 Like
Yeah, open a new thread about shadowsocks.
2 Likes
can i ask what is the best cloak protocol here? or may i roam to other forum? i see answer time here is pretty fast, and you all are like the jack of all trades of information technology
Depends how the restrictions are implemented...
2 Likes
i was using openvpn tcp on 443 port but it got throttled maybe they are snooping the traffic because they are... i mean how they could know i was using vpn . unless they dpi firewall the traffic
- Perhaps because you have non-stop asymmetric traffic on 443/tcp to the same DST IP?
- and the DST is not an HTTPS server (imagine that)?
- I assume at this time, other unencrypted traffic exiting WAN - ceases