Gl.Inet MT6000 problem?

For Developers
1

Hi,

I use this device since 3 months, never had a problem with my own build, usualy I use snapshot from main/master, but since a week or so, none of my build from master is working, I mean, I can have access to LuCi but no wifi, and after it, I just have to upload a new sysupgrade image from my 24.10 snapshot compilation to have a working build.

I use the same .config for both, as I said, everything worked 2 weeks ago.
Do you know if there is a problem about that device and or master ?
thanks

2

There are some issues with snapshots being discussed in the main topic:

1 Like
3

@hnyman I know you are using master too, do you have that problem too?

4

No problems.
Currently using a main/master image compiled two days ago:
OpenWrt SNAPSHOT r29070-8d1fe32c2c / LuCI Master 25.080.50251~fc8ad20

OpenWrt main r29070-8d1fe32c2c / 2025-03-23 18:44
---
openwrt   2025-03-22 8d1fe32 lldpd: add `custom-tlv` handling
luci      2025-03-22 bf48c56 Translated using Weblate (Swedish)
packages  2025-03-23 0b4e8e1 adguardhome: bump to 0.107.59
routing   2025-03-06 2fb5af6 opennds: update to version 10.3.1

And wifi clients connect normally:

root@router6000:~# /etc/wifi-suite.sh
Associated wifi stations' AKM suites:
hn5wpa2r: AKM suite of e0:c3:77:ae:0a:30 is 00-0f-ac-4 (WPA-PSK-FT)
hn5wpa3: AKM suite of a8:cc:6f:0a:50:f1 is 00-0f-ac-8 (WPA3-SAE)
1 Like
5

Yeah no problem here I'm on r29079 from today...The only issue for me is the long standing issue that after I flash new firmware I will have the WAN disconnected (Removing WAN/LAN cable or rebooting does not fix it). But as soon as I restore my config from before the Firmware Update I'm back in business. As I said in another thread I've been doing this since around middle of last year when other's had the same issue...I'm using Starlink.

6

ok, but IM keeping my setting during sysupgrade, so I am suuposed to be ok?

7

Should...Especially now that they've remove the EEE...

That EEE "thing" was removed from the Snapshots as of yesterday and now my Flint2 router can be upgraded and I have no more disconnect on the WAN...Tested with yesterday's and today's snapshot and no more WAN disconnect issues after an upgrade with my router and my Starlink.