Firewall Parental Controls

Installing and Using OpenWrt
1

Hello,

I seem to be having an issue getting the correct time to work under the reject action. Ever since day light saving time happened last weekend I have to add an hour to the start and end times to reject and open access. I have the stock NTP servers enabled and time (pacific time) is showing correct on the Overview page, but all custom firewall rules I have to add +1 to the hour start/end times. Is this normal or is there something I'm missing?

I'm running 18.06.1 on WRT1900ACS and have followed the entire guide located here: https://openwrt.org/docs/guide-user/firewall/fw3_configurations/fw3_parent_controls

Any help is appreciated. Thanks!

2

By any chance...have you rebooted yet, since PST came into effect on Sunday morning?

3

Yeah, I've rebooted a couple times since daylight saving time went into effect.

4

If your problem persists, I'd suggest using UTC. This will not affect your ability to get PST time on your clients.

5

I'm having this same issue. After recent switch from Daylight to Standard time, firewall rules are off by one hour.
OpenWrt SNAPSHOT r14459-96586ad8ca / LuCI Master git-20.254.65894-a314b59

6