Greetings people from the forum,
Excuse me, I do not speak English so the translation will be done by Google.
I bought a new Archer C50 V1 and tried to install the OpenWRT.
The firmware in particular is ArcherC50v1-squashfs-factory-eu.bin from the address http://downloads.openwrt.org/releases/18.06.1/targets/ramips/mt7620/
Try two ways from the web of the original firmware via firmware upgrade, it did not work, apparently the router was entering BootLoop, solve it (Debrick) by cutting with DD the original TPLink firmware and using the recovery method via TFTP.
Then I used the same OpenWRT firmware (as it was downloaded) and I used the recovery method via TFTP but it was worse, now the router sent an orange light and then it turned off completely, I could not bring it back to life so I took the hand of the guarantee and accepted the change.
Now I have a C50 again I would like to know how to install this OpenWRT for the first time to this router ?.
Thank you very much for your help
SPANISH :
Saludos gente del foro,
He comprado un Archer C50 V1 nuevo y trate de instalar el OpenWRT.
El firmware en concreto es ArcherC50v1-squashfs-factory-eu.bin de la direccion http://downloads.openwrt.org/releases/18.06.1/targets/ramips/mt7620/
Trate por dos maneras desde la web del firmware original via firmware upgrade, no funciono, aparentemente el router se entraba en BootLoop, lo solucione (Debrick) recortando con DD el firmware original de TPLink y usando el metodo recovery via TFTP.
Luego use el mismo firmware de OpenWRT (tal cual lo descargue) y use el metodo recovery via TFTP pero fue peor, ahora el router mandaba una luz naranja y luego se apagaba por completo, no pude volverlo a la vida asi que heche mano de la garantia y aceptaron el cambio.
Ahora tengo nuevamente un C50 quisiera saber ¿como se instala por primera vez el OpenWRT a este router?.
Muchas gracias por su ayuda