Never say never. It is quite easy to implement.
Anyone who really needs it can do it 
I've never said never.
As the stuff for mach file based devices exist it shouldn't be that hard, but i don't need control over the switch leds... And i think it eats up some cpu cycles if they are not controlled by the switch itself for indicating port traffic.
@Vulpix You only want to disable it?
This should be easy possible with other init vals for the switch led ctrl registers.
I didn't look deep but I think they are controlled by the switch itself. To control the leds we write to swich registers.
Even if that is true, it's nothing.
Not if they are registered as led device, because no one want concurrent acces to the leds...
Never say nothing 
1 Like
Yeah I just want to turn all of them off. I know the router is working and I prefer to not have 999 blinking lights in my room 
If it's simple to do, I'd be very happy if you could tell me how!
Thanks!
1 Like
Will OpenWRT ath97 branch support Netgear R6100?
Specification:
- Atheros AR9344
- 128 MB of RAM
- 128 MB of Flash
- 4x 10/100 Ethernet
Also Netgear released a GPL source pack for this router, wonder if this helps.
There is no reason why it wouldn't be supported by ath79 in the future (conceptually it looks very similar to the tl-wdr3600/4300, just with a 802.11ac 5 GHz wlan card instead of 802.11n), but like for all other devices that have already been ported from ar71xx to ath79, it needs someone with the actual hardware on the desk to work on it (and predictions about when (or if) someone turns their attention to it aren't possible).
Unfortunately it is not possible to mass-convert ar71xx mach files to ath79 and device tree in an automated fashion, without looking at- and testing on the actual hardware.
1 Like
IĀ“ve added a new build!
Changelog:
- kernel version 4.14.66
- updated packages
Included features / packages (build with: -O2 -nomips16):
default build:
- same packages as on openwrt snapshot / trunk builds
- luci-ssl + luci-theme-bootstarp
- luci-app-sqm + sqm
- luci-app-ddns + ddns-scripts
- luci-app-openvpn + openvpn-mbedtls
- wpad
- nano
- support for ath9k dynack
minimal build:
- same packages as on openwrt snapshot / trunk builds
- support for ath9k dynack
Supported device images:
- D-LINK DIR-825 B1
- NETGEAR WNDR3700 (wan port issues)
- NETGEAR WNDR3700 V2 (wan port issues)
- NETGEAR WNDR3800 (wan port issues)
- Phicomm K2T
- TP-Link Archer C7 V2
- TP-Link RE450 V2
- TP-Link WDR3600
- TP-Link WDR4300
- TP-Link WDR4900 V2
- TP-Link WR1043 V1
- TP-Link WR1043 V2
- TP-Link WR1043 V3
- TP-Link WR1043 V4
- TP-Link WR2543 V1
- Ubiquiti UniFi AC Pro
- Ubiquiti UniFi AC-Mesh
- Ubiquiti UniFi AC-Mesh Pro
- Ubiquiti UniFi AC-Lite
Download 4.14.66 (default build)
Download 4.14.66 (minimal build)
Please read first post if you come from ar71xx
1 Like
Hey @juppin i've tried the build, it works but i still only get 300 mbps on archer c7 v2 with the offloading set, but with the regular firmware i can get close to a gigabit speeds, you have any ideas?
Same here @sycohexor. Actually I'm getting even lower speeds as I'm seeing ~260 Mbits/sec on WiFi connections. My setup is like this:
Edge Router X <> TP Link C7 v2 <> Laptop on AC connection
iperf3 -s is running on the Edge Router X and I'm connecting to it with a few different wireless devices to get a sample size.
Itās not just wireless for me itās wired, I run iperf on the router and iperf on my laptop, 300 mbps is what it tops out at
Well, with this setup you will not have any improvement with flow offloading! No routing/nat involved...
I suggest you havenĀ“t tested it this way with factory fw? I donĀ“t think you have iperf running on tp linkĀ“s fw.
Your test environment should be:
computer (should have a bit horse power) <> [wan] c7v2 [lan] <> computer (should have a bit horse power)
Iperf is a bit heavy on cpu! So if you want to benchmark the routing/nat throughput of a low powered router device, you should not run any cpu heavy stuff on this device.
My WDR3600 does reach about 190 MBit/s over wifi with flow offloading:
notebook [wifi: intel 8260] <> [5g wifi] wdr3600 [wan] <> my server
About 920 MBit/s over lan with flow offloading:
notebook [realtek XXXX] <> [lan] wdr3600 [wan] <> my server
1 Like
@juppin Wan port issues on WNDR should be fixed now in master. The patches have been committed.
Also wireless speed issues on ar7100 are gone with my patch.
2 Likes
IĀ“ve added a new build!
Changelog:
- kernel version 4.14.67
- updated packages
- ar7100-pci interrupt bug fix (commits: 8132e0, fd20fd) [fixes Netgear devices]
- mii ctrl configuration (commit: 028daa) [fixes Netgear devices]
Included features / packages (build with: -O2 -nomips16):
default build:
- same packages as on openwrt snapshot / trunk builds
- luci-ssl + luci-theme-bootstarp
- luci-app-sqm + sqm
- luci-app-ddns + ddns-scripts
- luci-app-openvpn + openvpn-mbedtls
- wpad
- nano
- support for ath9k dynack
minimal build:
- same packages as on openwrt snapshot / trunk builds
- support for ath9k dynack
Supported device images:
- D-LINK DIR-825 B1
- NETGEAR WNDR3700
- NETGEAR WNDR3700 V2
- NETGEAR WNDR3800
- Phicomm K2T
- TP-Link Archer C7 V2
- TP-Link RE450 V2
- TP-Link WDR3600
- TP-Link WDR4300
- TP-Link WDR4900 V2
- TP-Link WR1043 V1
- TP-Link WR1043 V2
- TP-Link WR1043 V3
- TP-Link WR1043 V4
- TP-Link WR2543 V1
- Ubiquiti UniFi AC Pro
- Ubiquiti UniFi AC-Mesh
- Ubiquiti UniFi AC-Mesh Pro
- Ubiquiti UniFi AC-Lite
Download 4.14.67 (default build)
Download 4.14.67 (minimal build)
Please read first post if you come from ar71xx
1 Like
Thanks My TPlink wdr4300 use now 4.14.63, you update 4.14.67. Need update me?
There was an vulnerability in the kernel (ddos) that is fixed with 4.14.66 and some vulnerabilities in the wireless implementation if i'm right. Also dropbear (ssh server) was was affected by a vulnerability. You should consider to update to the latest build.
Stability and performance should be the same as with the older build for your wdr4300.
1 Like
Tnx i now update. How all leds off? plz make manual. I install MC not work correct.
Sorry, the switch leds are not controllable at the moment. Use a black tape as described above...
What is MC?
Midnight Commander =MC