Ath10k-firmware-qca988x mesh issue

Hello ,
I want to setup mesh network in my home on 5 GHz band.I am using ath10k-firmware-qca988x default firmware and driver(no CT) kernel 4.9.129.I am facing issue in 5 GHz where mesh link is creating very easily and fast but i am not getting L3 connectivity(IP,ping and trace route,etc) even RX is nill in both access point.I followed with wpa_supplicant and with iw too.The same thing happens quickly in 2.4 GHz band mesh ssid with L3 connectivity. There is not delay or loss in 2.4 GHz band.
Please help me. I have also configured by Luci with 802.11s option.

any solutions?

I've had just the same problem today.

I fixed if by using the ath10k-ct driver and the board.bin and firmware-5.bin_10.2.4-1.0-00025 from

Just copy
board.bin to /lib/firmware/ath10k/QCA988X/hw2.0/board.bin
firmware-5.bin_10.2.4-1.0-00025 to /lib/firmware/ath10k/QCA988X/hw2.0/ct-firmware-5.bin

Next edit /etc/modules.d/ath10k-ct and change its contents to

ath10k_core rawmode=1

After a swift reboot mesh worked just fine.

1 Like

This topic was automatically closed 10 days after the last reply. New replies are no longer allowed.