autist wrote:Eyerex wrote:davidc502 wrote:I have, but not with the 1200. However, if it works for the 1900/3200, it should also work for the 1200 as well.
These are the NTFS packages already installed.
root@lede:/etc/config# opkg list-installed |grep ntfs
kmod-fs-ntfs - 4.9.37-1
ntfs-3g - 2017.3.23-1-fuseint
Is a USB drive been formatted with NTFS or a Hard Drive?
Hello am i missing something as trying to mount a 5TB Seagate Expansion drive NTFS on a 1900ACS V1 using Lede Reboot SNAPSHOT r4576-9fe9175 but it doesn't show up in Mount Points so do i need to enable something to get it to work ? drive works fine under DD-WRT
Same issue, it does not show up in Mount Points. The ntfs packages are installed like David said but for some reason it does not show up.
I mount my ntfs drive by putting the mount command in /etc/rc.local (System>Startup>Local Startup in Luci), here's mine for example -
ntfs-3g /dev/sda1 /mnt/storage -o rw,async
that way it mounts at boot, or you can just run your mount command manually, ntfs will never show up in mount points as far as I'm aware.
edit - just wanted to clarify that while ntfs won't show up in Mount Points, it will show up in Mounted File Systems once mounted (in Luci>Mount Points).
(Last edited by beachbum on 18 Jul 2017, 01:17)