Lennert,
I know that I shouldnt have paired the 0x2a02 pci id with the name fmimage_8363.fw.
My misstake. I will remove the patch.
The reason that I wanted to include the hashes of the fw was so it would be easy for us to identify them after extraction.
Can you get the FW files any other way? They are not in the linux-fw-git-tree. How did you get yours?
So far we have used the mrv8k_extract_fw tool as our only source for FW.
( Im talking about the regular 8363, 8687, 8366 fw )
I will send you the FW-files I used.
Full demsg:
Linux version 2.6.32.12 (erik@thinkpad) (gcc version 4.3.3 (GCC) ) #3 Wed May 5 22:22:43 CEST 2010
CPU: Feroceon [41069260] revision 0 (ARMv5TEJ), cr=a0053177
CPU: VIVT data cache, VIVT instruction cache
Machine: Netgear WNR854T
Clearing invalid memory bank 0KB@0xffffffff
Clearing invalid memory bank 0KB@0xffffffff
Clearing invalid memory bank 0KB@0xffffffff
Ignoring unrecognised tag 0x00000000
Ignoring unrecognised tag 0x00000000
Ignoring unrecognised tag 0x00000000
Memory policy: ECC disabled, Data cache writeback
On node 0 totalpages: 8192
free_area_init_node: node 0, pgdat c0249a08, node_mem_map c025b000
Normal zone: 64 pages used for memmap
Normal zone: 0 pages reserved
Normal zone: 8128 pages, LIFO batch:0
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8128
Kernel command line: root=/dev/mtdblock1 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200
PID hash table entries: 128 (order: -3, 512 bytes)
Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
Memory: 32MB = 32MB total
Memory: 30076KB available (2144K code, 132K data, 92K init, 0K highmem)
Hierarchical RCU implementation.
NR_IRQS:64
Calibrating delay loop... 332.59 BogoMIPS (lpj=1662976)
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
NET: Registered protocol family 16
Orion ID: MV88F5181-Rev-B1. TCLK=166666667.
Applying Orion-1/Orion-NAS PCIe config read transaction workaround
pci 0000:00:00.0: reg 10 64bit mmio pref: [0xf1000000-0xf10fffff]
pci 0000:00:00.0: reg 18 32bit mmio: [0x000000-0x1ffffff]
PCI: bus0: Fast back to back transfers disabled
pci 0000:01:00.0: reg 10 64bit mmio pref: [0x000000-0x1ffffff]
pci 0000:01:00.0: reg 18 64bit mmio pref: [0x10000000-0x1fffffff]
pci 0000:01:00.0: reg 20 64bit mmio: [0xf1000000-0xf10fffff]
pci 0000:01:00.0: reg 30 32bit mmio pref: [0xe0000000-0xe7ffffff]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot
pci 0000:01:00.0: PME# disabled
pci 0000:01:07.0: reg 10 32bit mmio: [0x40000000-0x4000ffff]
pci 0000:01:07.0: reg 14 32bit mmio: [0x40010000-0x4001ffff]
PCI: bus1: Fast back to back transfers enabled
bio: create slab <bio-0> at 0
Switching to clocksource orion_clocksource
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 1024 (order: 1, 8192 bytes)
TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
TCP: Hash tables configured (established 1024 bind 1024)
TCP reno registered
NET: Registered protocol family 1
squashfs: version 4.0 (2009/01/31) Phillip Lougher
Registering mini_fo version $Id$
JFFS2 version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
msgmni has been set to 58
io scheduler noop registered
io scheduler deadline registered (default)
Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 3) is a 16550A
console [ttyS0] enabled
physmap platform flash device: 00800000 at f4000000
physmap-flash.0: Found 1 x16 devices at 0x0 in 16-bit bank
Intel/Sharp Extended Query Table at 0x0031
Intel/Sharp Extended Query Table at 0x0031
Using buffer write method
cfi_cmdset_0001: Erase suspend on write enabled
erase region 0: offset=0x0,size=0x20000,blocks=64
cmdlinepart partition parsing not available
RedBoot partition parsing not available
Using physmap partition information
Creating 4 MTD partitions on "physmap-flash.0":
0x000000000000-0x000000100000 : "kernel"
0x000000100000-0x000000760000 : "rootfs"
mtd: partition "rootfs" set to be root filesystem
mtd: partition "rootfs_data" created automatically, ofs=260000, len=500000
0x000000260000-0x000000760000 : "rootfs_data"
0x000000760000-0x0000007a0000 : "uboot"
0x000000000000-0x000000760000 : "image"
MV-643xx 10/100/1000 ethernet driver version 1.4
mv643xx_eth smi: probed
net eth0: port 0 with MAC address 00:00:00:00:51:81
i2c /dev entries driver
TCP westwood registered
NET: Registered protocol family 17
Distributed Switch Architecture driver version 0.1
eth0[0]: detected a Marvell 88E6131 switch
dsa slave smi: probed
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
VFS: Mounted root (squashfs filesystem) readonly on device 31:1.
Freeing init memory: 92K
Please be patient, while OpenWrt loads ...
mini_fo: using base directory: /
mini_fo: using storage directory: /overlay
eth0: link up, 1000 Mb/s, full duplex, flow control disabled
device lan3 entered promiscuous mode
device eth0 entered promiscuous mode
device lan4 entered promiscuous mode
device lan1 entered promiscuous mode
device lan2 entered promiscuous mode
Generic kernel compatibility enabled based on linux-next next-20100113
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
(2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
(2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
(2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
(5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
(5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Marvell TOPDOG(R) 802.11 Wireless Network Driver version 0.12
phy0: Selected rate control algorithm 'minstrel'
phy0: 88w8363 v4, 00:18:4d:20:2a:bf, STA firmware 2.1.4.25
PPP generic driver version 2.4.2
ip_tables: (C) 2000-2006 Netfilter Core Team
NET: Registered protocol family 24
nf_conntrack version 0.5.0 (471 buckets, 1884 max)
lan3: link up, 1000 Mb/s, full duplex, flow control disabled
br-lan: port 1(lan3) entering forwarding state
egisteredlash.0: Found 1 x16 devices at 0x0 in 16-bit bank
io scheduler deadline registered (default)
Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 3) is a 16550A
console [ttyS0] enabled
physmap platform flash device: 00800000 at f4000000
physmap-flash.0: Found 1 x16 devices at 0x0 in 16-bit bank
Intel/Sharp Extended Query Table at 0x0031
Intel/Sharp Extended Query Table at 0x0031
Using buffer write method
cfi_cmdset_0001: Erase suspend on write enabled
erase region 0: offset=0x0,size=0x20000,blocks=64
cmdlinepart partition parsing not available
RedBoot partition parsing not available
Using physmap partition information
Creating 4 MTD partitions on "physmap-flash.0":
0x000000000000-0x000000100000 : "kernel"
0x000000100000-0x000000760000 : "rootfs"
mtd: partition "rootfs" set to be root filesystem
mtd: partition "rootfs_data" created automatically, ofs=260000, len=500000
0x000000260000-0x000000760000 : "rootfs_data"
0x000000760000-0x0000007a0000 : "uboot"
0x000000000000-0x000000760000 : "image"
MV-643xx 10/100/1000 ethernet driver version 1.4
mv643xx_eth smi: probed
net eth0: port 0 with MAC address 00:00:00:00:51:81
i2c /dev entries driver
TCP westwood registered
NET: Registered protocol family 17
Distributed Switch Architecture driver version 0.1
eth0[0]: detected a Marvell 88E6131 switch
dsa slave smi: probed
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
//Erik