101 (edited by Xylen.C4 2013-11-22 19:39:09)

Re: TP-Link TL-MR13U - small router with built-in 10,400 mAh battery

@vladorion

yesterday i was trying it. Unfourtuannely i stopped as i got the "ttyUSB1" but from this point it should be pretty easy!

The main problem was to get the kmod-usb-serial running. If you want to try, try the "packages" which i posted before. At the moment the online kmod-usb-serial does not work.

Re: TP-Link TL-MR13U - small router with built-in 10,400 mAh battery

Yesterday i made some IP changes... something goes wrong... after that i was not able to connect to the router anymore

unfourtuanely the Failsafe mode was not working.... Be carefull with my image!!!

Lucky me... after a couple of more tryes i was get access to luci!

How can i manage to enable the failsafe mode while im compiling the image?


Thanks...

103 (edited by Xylen.C4 2013-12-06 21:40:28)

Re: TP-Link TL-MR13U - small router with built-in 10,400 mAh battery

Seems to be 3G is now working for me with the ZTE MF190, i connected successfully

Thu Nov 21 20:50:31 2013 kern.info kernel: [ 1180.840000] usb 1-1: new high-speed USB device number 6 using ehci-platform
Thu Nov 21 20:50:32 2013 kern.info kernel: [ 1182.750000] usb 1-1: USB disconnect, device number 6
Thu Nov 21 20:50:33 2013 kern.info kernel: [ 1183.160000] usb 1-1: new high-speed USB device number 7 using ehci-platform
Thu Nov 21 20:50:33 2013 kern.info kernel: [ 1183.400000] option 1-1:1.0: GSM modem (1-port) converter detected
Thu Nov 21 20:50:33 2013 kern.info kernel: [ 1183.430000] usb 1-1: GSM modem (1-port) converter now attached to ttyUSB0
Thu Nov 21 20:50:33 2013 kern.info kernel: [ 1183.430000] option 1-1:1.1: GSM modem (1-port) converter detected
Thu Nov 21 20:50:33 2013 kern.info kernel: [ 1183.460000] usb 1-1: GSM modem (1-port) converter now attached to ttyUSB1
Thu Nov 21 20:50:33 2013 kern.info kernel: [ 1183.460000] option 1-1:1.2: GSM modem (1-port) converter detected
Thu Nov 21 20:50:33 2013 kern.info kernel: [ 1183.490000] usb 1-1: GSM modem (1-port) converter now attached to ttyUSB2
Thu Nov 21 20:50:36 2013 daemon.notice pppd[4571]: pppd 2.4.5 started by root, uid 0
Thu Nov 21 20:50:37 2013 local2.info chat[4574]: abort on (BUSY)
Thu Nov 21 20:50:37 2013 local2.info chat[4574]: abort on (NO CARRIER)
Thu Nov 21 20:50:37 2013 local2.info chat[4574]: abort on (ERROR)
Thu Nov 21 20:50:37 2013 local2.info chat[4574]: report (CONNECT)
Thu Nov 21 20:50:37 2013 local2.info chat[4574]: timeout set to 10 seconds
Thu Nov 21 20:50:37 2013 local2.info chat[4574]: send (AT&F^M)
Thu Nov 21 20:50:37 2013 local2.info chat[4574]: expect (OK)
Thu Nov 21 20:50:37 2013 local2.info chat[4574]: AT&F^M^M
Thu Nov 21 20:50:37 2013 local2.info chat[4574]: OK
Thu Nov 21 20:50:37 2013 local2.info chat[4574]:  -- got it
Thu Nov 21 20:50:37 2013 local2.info chat[4574]: send (ATE1^M)
Thu Nov 21 20:50:37 2013 local2.info chat[4574]: expect (OK)
Thu Nov 21 20:50:37 2013 local2.info chat[4574]: ^M
Thu Nov 21 20:50:37 2013 local2.info chat[4574]: ATE1^M^M
Thu Nov 21 20:50:37 2013 local2.info chat[4574]: OK
Thu Nov 21 20:50:37 2013 local2.info chat[4574]:  -- got it
Thu Nov 21 20:50:37 2013 local2.info chat[4574]: send (AT+CGDCONT=1,"IP","internet.t-mobile"^M)
Thu Nov 21 20:50:37 2013 local2.info chat[4574]: timeout set to 30 seconds
Thu Nov 21 20:50:37 2013 local2.info chat[4574]: expect (OK)
Thu Nov 21 20:50:37 2013 local2.info chat[4574]: ^M
Thu Nov 21 20:50:37 2013 local2.info chat[4574]: AT+CGDCONT=1,"IP","internet.t-mobile"^M^M
Thu Nov 21 20:50:37 2013 local2.info chat[4574]: OK
Thu Nov 21 20:50:37 2013 local2.info chat[4574]:  -- got it
Thu Nov 21 20:50:37 2013 local2.info chat[4574]: send (ATD*99***1#^M)
Thu Nov 21 20:50:38 2013 local2.info chat[4574]: expect (CONNECT)
Thu Nov 21 20:50:38 2013 local2.info chat[4574]: ^M
Thu Nov 21 20:50:38 2013 local2.info chat[4574]: ATD*99***1#^M^M
Thu Nov 21 20:50:38 2013 local2.info chat[4574]: CONNECT
Thu Nov 21 20:50:38 2013 local2.info chat[4574]:  -- got it
Thu Nov 21 20:50:38 2013 local2.info chat[4574]: send ( ^M)
Thu Nov 21 20:50:38 2013 daemon.info pppd[4571]: Serial connection established.
Thu Nov 21 20:50:38 2013 daemon.info pppd[4571]: Using interface 3g-Telecom
Thu Nov 21 20:50:38 2013 daemon.notice pppd[4571]: Connect: 3g-Telecom <--> /dev/ttyUSB2
Thu Nov 21 20:50:39 2013 daemon.info pppd[4571]: CHAP authentication succeeded
Thu Nov 21 20:50:39 2013 daemon.notice pppd[4571]: CHAP authentication succeeded
Thu Nov 21 20:50:46 2013 daemon.warn pppd[4571]: Could not determine remote IP address: defaulting to 10.64.64.64
Thu Nov 21 20:50:46 2013 daemon.notice pppd[4571]: local  IP address 10.30.200.160
Thu Nov 21 20:50:46 2013 daemon.notice pppd[4571]: remote IP address 10.64.64.64
Thu Nov 21 20:50:46 2013 daemon.notice pppd[4571]: primary   DNS address 10.74.210.210
Thu Nov 21 20:50:46 2013 daemon.notice pppd[4571]: secondary DNS address 10.74.210.211
Thu Nov 21 20:50:46 2013 daemon.notice netifd: Interface 'Telecom' is now up
Thu Nov 21 20:50:46 2013 user.notice firewall: Reloading firewall due to ifup of Telecom (3g-Telecom)
Thu Nov 21 20:50:52 2013 daemon.info dnsmasq[2876]: reading /tmp/resolv.conf.auto
Thu Nov 21 20:50:52 2013 daemon.info dnsmasq[2876]: using nameserver 10.74.210.211#53
Thu Nov 21 20:50:52 2013 daemon.info dnsmasq[2876]: using nameserver 10.74.210.210#53
Thu Nov 21 20:50:52 2013 daemon.info dnsmasq[2876]: using local addresses only for domain lan

http://bildr.no/thumb/R3dsNldi.jpeg
http://bildr.no/thumb/dnZsdWdi.jpeg
http://bildr.no/thumb/SnB5ZVEw.jpeg


Modules additional installed by default:
- comgt
- kmod-usb2
- kmod-usb-ohci
- kmod-usb-uhci
- kmod-usb-serial
- kmod-usb-serial-option,
- kmod-usb-serial-wwan
- kmod-usb-acm
- luci-proto-3g
- usb-modeswitch
- ppp-mod-pptp

Modules which are NOT installed by default:
- huaweiAktBbo
- luci-proto-ppp

Modules which are removed:
- Some IPv6 packages


Images: (use at your own risk)
- Sysupgrade including Luci
- Factory image including Luci (not tested)
- md5sums
- Packages
- Complete package



@anarchy99: I do not understand, what do you need?

Re: TP-Link TL-MR13U - small router with built-in 10,400 mAh battery

Greetings,

I have one (noob?) question about sysupgrade: there are 3 different binaries:
ap96-squashfs-sysupgrade.bin
pb42-squashfs-sysupgrade.bin
pb44-squashfs-sysupgrade.bin
in the repository: http://downloads.openwrt.org/snapshots/trunk/ar71xx/
can you, please, explain what's the difference (and how I should choose which-one to use)?

Best regards...

Re: TP-Link TL-MR13U - small router with built-in 10,400 mAh battery

Normally you should use

http://downloads.openwrt.org/snapshots/ … actory.bin

or

http://downloads.openwrt.org/snapshots/ … pgrade.bin

for the MR13U, this is different for other devices!

Be aware... this images does not include LUCI

Re: TP-Link TL-MR13U - small router with built-in 10,400 mAh battery

hmmm... failsafe mode was working for me so maybe i was doing something wrong?

This week i was working in Dalian (China), afterwork i was trying to get the TL-TR861 10400E at the local markets... no changse this device is not available. At leas i found 2 sellers for this device, i asked about 50+ shops. The market price was betrween 220 Yuan to 250 Yuan.

Also a chinese colleague at work tryed to get it over the internet (TL-TR861 10400E). Nothing! I dindt want to get it to any price!

107 (edited by Vincent Orange 2014-01-20 16:06:58)

Re: TP-Link TL-MR13U - small router with built-in 10,400 mAh battery

Hi,

I'm and teacher and I'd like to use the TP-Link MR13U as a LibraryBox/PirateBox for students for get materials, books etc,

So far I have replaced the TP-Link made firmware with OpenWRT firmware version made specially for this device which I got from here. http://downloads.openwrt.org/snapshots/ … actory.bin

I have also been able to telnet to the device set a password and then SSH into it and modify /etc/config/wireless (I noticed there were two lines that said "option disable 0" so i deleted both and then the wifi started working)

I'm now looking to put librarybox onto it.

- Do I need to install LuCI enable me to install librarybox?
- Are there MR13U specific instrcutions or can I just use the instructions written for MR3020 seen here http://librarybox.us/MR3020.php or for the MR3020 (or WR703N) http://daviddarts.com/piratebox-diy-openwrt/

thanks to all the contributors.

Re: TP-Link TL-MR13U - small router with built-in 10,400 mAh battery

Vincent Orange wrote:

Hi,

I'm and teacher and I'd like to use the TP-Link MR13U as a LibraryBox/PirateBox for students for get materials, books etc,

So far I have replaced the TP-Link made firmware with OpenWRT firmware version made specially for this device which I got from here. http://downloads.openwrt.org/snapshots/ … actory.bin

I have also been able to telnet to the device set a password and then SSH into it and modify /etc/config/wireless (I noticed there were two lines that said "option disable 0" so i deleted both and then the wifi started working)

I'm now looking to put librarybox onto it.

- Do I need to install LuCI enable me to install librarybox?
- Are there MR13U specific instrcutions or can I just use the instructions written for MR3020 seen here http://librarybox.us/MR3020.php or for the MR3020 (or WR703N) http://daviddarts.com/piratebox-diy-openwrt/

thanks to all the contributors.


I've manage to get this device working with ful piratebox features by using a zustom firmware build supplied by fried zombie.
http://stable.openwrt.piratebox.de/ar71xx_AA_BB_0.1/

Re: TP-Link TL-MR13U - small router with built-in 10,400 mAh battery

My backup solution for MR13U:
Mount Flash memory on a small PCB with headers for be able to deattach it.
I have constructed a adapter for use a TotalPhase Aardvark I2C/SPI Host Adapter.

deattachable memory


deattachable memory

110 (edited by vladorion 2014-04-09 13:52:41)

Re: TP-Link TL-MR13U - small router with built-in 10,400 mAh battery


So, as I can see you got it to work with 3G modem. Can you explain me what image should i flash to get 3G modems working? I am using both ZTE and Huawei modems and I need Luci.

Re: TP-Link TL-MR13U - small router with built-in 10,400 mAh battery

micke_s wrote:

My backup solution for MR13U:
Mount Flash memory on a small PCB with headers for be able to deattach it.
I have constructed a adapter for use a TotalPhase Aardvark I2C/SPI Host Adapter.

My device got bricked. Now i guess i have to disassemble it and connect a serial cable. Can you explain how to open the case with minimal damage?

Re: TP-Link TL-MR13U - small router with built-in 10,400 mAh battery

I first used a knife(that you eat with), to first break the glue, a thin one.
After i have separate it a little bit i take two more knives and bending.

Re: TP-Link TL-MR13U - small router with built-in 10,400 mAh battery

Opened it already with a surgery scalpel. Now I need to solder wires to tx, rx and gnd pads, they are very small sad

114 (edited by nebbia88 2014-04-14 18:26:31)

Re: TP-Link TL-MR13U - small router with built-in 10,400 mAh battery

good luck... if you are not expert in soldering i'd try keeping the wires on pads by hand.. call a friend to help xD

115

Re: TP-Link TL-MR13U - small router with built-in 10,400 mAh battery

Hello!
Search for new firmware for TP-Link TL-MR13U and found that TP-Link relise source of original firmware under GPL - http://www.tp-link.com/resources/gpl/150Router.tar
Maybe somebody can translate original firmware on english?

Re: TP-Link TL-MR13U - small router with built-in 10,400 mAh battery

otlabs wrote:

Christmas comes early this year. Especially for @grayman4hire ;-)

This patch brings support for TP-Link TL-MR13U in Attitude Adjustment 12.09 (r37729, latest release for AA):

diff --git a/target/linux/ar71xx/base-files/etc/diag.sh b/target/linux/ar71xx/base-files/etc/diag.sh
index 416322d..7590414 100755
--- a/target/linux/ar71xx/base-files/etc/diag.sh
+++ b/target/linux/ar71xx/base-files/etc/diag.sh
@@ -139,6 +139,7 @@ get_status_led() {
     tl-wr941nd)
         status_led="tp-link:green:system"
         ;;
+    tl-mr13u | \
     tl-wdr4300 | \
     tl-wr703n)
         status_led="tp-link:blue:system"
diff --git a/target/linux/ar71xx/base-files/etc/uci-defaults/network b/target/linux/ar71xx/base-files/etc/uci-defaults/network
index 7fa219d..6daf568 100755
--- a/target/linux/ar71xx/base-files/etc/uci-defaults/network
+++ b/target/linux/ar71xx/base-files/etc/uci-defaults/network
@@ -154,6 +154,7 @@ eap7660d |\
 mr600 |\
 rb-411 |\
 tl-mr11u |\
+tl-mr13u |\
 tl-mr3020 |\
 tl-mr3040 |\
 tl-wa901nd |\
diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh
index 2bc8194..ed3b33e 100755
--- a/target/linux/ar71xx/base-files/lib/ar71xx.sh
+++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh
@@ -111,6 +111,9 @@ tplink_board_detect() {
     "110101"*)
         model="TP-Link TL-MR11U"
         ;;
+    "001301"*)
+        model="TP-Link TL-MR13U"
+        ;;
     "302000"*)
         model="TP-Link TL-MR3020"
         ;;
@@ -384,6 +387,9 @@ ar71xx_board_detect() {
     *"TL-MR11U")
         name="tl-mr11u"
         ;;
+    *"TL-MR13U")
+        name="tl-mr13u"
+        ;;
     *UniFi)
         name="unifi"
         ;;
diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
index 49b1de9..c105318 100755
--- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
@@ -148,6 +148,7 @@ platform_check_image() {
         return 1
         ;;
     tl-mr11u | \
+    tl-mr13u | \
     tl-mr3020 | \
     tl-mr3040 | \
     tl-mr3220 | \
diff --git a/target/linux/ar71xx/config-3.3 b/target/linux/ar71xx/config-3.3
index 446f202..ff1db6a 100644
--- a/target/linux/ar71xx/config-3.3
+++ b/target/linux/ar71xx/config-3.3
@@ -56,6 +56,7 @@ CONFIG_ATH79_MACH_TEW_632BRP=y
 CONFIG_ATH79_MACH_TEW_673GRU=y
 CONFIG_ATH79_MACH_TEW_712BR=y
 CONFIG_ATH79_MACH_TL_MR11U=y
+CONFIG_ATH79_MACH_TL_MR13U=y
 CONFIG_ATH79_MACH_TL_MR3020=y
 CONFIG_ATH79_MACH_TL_MR3X20=y
 CONFIG_ATH79_MACH_TL_WA901ND=y
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-mr13u.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-mr13u.c
new file mode 100644
index 0000000..8b03645
--- /dev/null
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-mr13u.c
@@ -0,0 +1,107 @@
+/*
+ *  TP-LINK TL-MR13U board support
+ *
+ *  Copyright (C) 2011 dongyuqi <729650915@qq.com>
+ *  Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ */
+
+#include <linux/gpio.h>
+
+#include <asm/mach-ath79/ath79.h>
+
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-usb.h"
+#include "dev-wmac.h"
+#include "machtypes.h"
+
+#define TL_MR13U_GPIO_LED_SYSTEM    27
+
+#define TL_MR13U_GPIO_BTN_RESET        11
+#define TL_MR13U_GPIO_BTN_SW1        6
+#define TL_MR13U_GPIO_BTN_SW2        7
+
+#define TL_MR13U_GPIO_USB_POWER        18
+
+#define TL_MR13U_KEYS_POLL_INTERVAL    20    /* msecs */
+#define TL_MR13U_KEYS_DEBOUNCE_INTERVAL    (3 * TL_MR13U_KEYS_POLL_INTERVAL)
+
+static const char *tl_mr13u_part_probes[] = {
+    "tp-link",
+    NULL,
+};
+
+static struct flash_platform_data tl_mr13u_flash_data = {
+    .part_probes    = tl_mr13u_part_probes,
+};
+
+static struct gpio_led tl_mr13u_leds_gpio[] __initdata = {
+    {
+        .name        = "tp-link:blue:system",
+        .gpio        = TL_MR13U_GPIO_LED_SYSTEM,
+        .active_low    = 1,
+    },
+};
+
+static struct gpio_keys_button tl_mr13u_gpio_keys[] __initdata = {
+    {
+        .desc        = "reset",
+        .type        = EV_KEY,
+        .code        = KEY_RESTART,
+        .debounce_interval = TL_MR13U_KEYS_DEBOUNCE_INTERVAL,
+        .gpio        = TL_MR13U_GPIO_BTN_RESET,
+        .active_low    = 0,
+    },
+    {
+        .desc        = "sw1",
+        .type        = EV_KEY,
+        .code        = BTN_0,
+        .debounce_interval = TL_MR13U_KEYS_DEBOUNCE_INTERVAL,
+        .gpio        = TL_MR13U_GPIO_BTN_SW1,
+        .active_low    = 0,
+    },
+    {
+        .desc        = "sw2",
+        .type        = EV_KEY,
+        .code        = BTN_1,
+        .debounce_interval = TL_MR13U_KEYS_DEBOUNCE_INTERVAL,
+        .gpio        = TL_MR13U_GPIO_BTN_SW2,
+        .active_low    = 0,
+    },
+};
+
+static void __init tl_mr13u_setup(void)
+{
+    u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
+    u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
+
+    /* disable PHY_SWAP and PHY_ADDR_SWAP bits */
+    ath79_setup_ar933x_phy4_switch(false, false);
+
+    ath79_register_m25p80(&tl_mr13u_flash_data);
+    ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_mr13u_leds_gpio),
+                 tl_mr13u_leds_gpio);
+    ath79_register_gpio_keys_polled(-1, TL_MR13U_KEYS_POLL_INTERVAL,
+                    ARRAY_SIZE(tl_mr13u_gpio_keys),
+                    tl_mr13u_gpio_keys);
+
+    gpio_request_one(TL_MR13U_GPIO_USB_POWER,
+             GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
+             "USB power");
+    ath79_register_usb();
+
+    ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
+
+    ath79_register_mdio(0, 0x0);
+    ath79_register_eth(0);
+    ath79_register_wmac(ee, mac);
+}
+
+MIPS_MACHINE(ATH79_MACH_TL_MR13U, "TL-MR13U", "TP-LINK TL-MR13U v1",
+         tl_mr13u_setup);
diff --git a/target/linux/ar71xx/generic/profiles/tp-link.mk b/target/linux/ar71xx/generic/profiles/tp-link.mk
index 07d7059..34c7933 100644
--- a/target/linux/ar71xx/generic/profiles/tp-link.mk
+++ b/target/linux/ar71xx/generic/profiles/tp-link.mk
@@ -16,6 +16,17 @@ endef
 $(eval $(call Profile,TLMR11U))
 
 
+define Profile/TLMR13U
+    NAME:=TP-LINK TL-MR13U
+    PACKAGES:=kmod-usb-core kmod-usb2 kmod-ledtrig-usbdev
+endef
+
+define Profile/TLMR13U/Description
+    Package set optimized for the TP-LINK TL-MR13U.
+endef
+$(eval $(call Profile,TLMR13U))
+
+
 define Profile/TLMR3020
     NAME:=TP-LINK TL-MR3020
     PACKAGES:=kmod-usb-core kmod-usb2 kmod-ledtrig-usbdev
diff --git a/target/linux/ar71xx/image/Makefile b/target/linux/ar71xx/image/Makefile
index 9ebe486..5206b9b 100644
--- a/target/linux/ar71xx/image/Makefile
+++ b/target/linux/ar71xx/image/Makefile
@@ -873,6 +873,7 @@ $(eval $(call SingleProfile,TPLINK,$(fs_64kraw),TLWR941NV4,tl-wr941nd-v4,TL-WR74
 $(eval $(call SingleProfile,TPLINK,$(fs_64kraw),TLWR1043,tl-wr1043nd-v1,TL-WR1043ND,ttyS0,115200,0x10430001,1,8M))
 
 $(eval $(call SingleProfile,TPLINK-LZMA,$(fs_64kraw),TLMR11U,tl-mr11u-v1,TL-MR11U,ttyATH0,115200,0x00110101,1,4Mlzma))
+$(eval $(call SingleProfile,TPLINK-LZMA,$(fs_64kraw),TLMR13U,tl-mr13u-v1,TL-MR13U,ttyATH0,115200,0x00130101,1,4Mlzma))
 $(eval $(call SingleProfile,TPLINK-LZMA,$(fs_64kraw),TLMR3020,tl-mr3020-v1,TL-MR3020,ttyATH0,115200,0x30200001,1,4Mlzma))
 $(eval $(call SingleProfile,TPLINK-LZMA,$(fs_64kraw),TLMR3040,tl-mr3040-v1,TL-MR3040,ttyATH0,115200,0x30400001,1,4Mlzma))
 $(eval $(call SingleProfile,TPLINK-LZMA,$(fs_64kraw),TLWR703,tl-wr703n-v1,TL-WR703N,ttyATH0,115200,0x07030101,1,4Mlzma))
diff --git a/target/linux/ar71xx/patches-3.3/930-add-tl-mr13u-support.patch b/target/linux/ar71xx/patches-3.3/930-add-tl-mr13u-support.patch
new file mode 100644
index 0000000..2daf6cd
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.3/930-add-tl-mr13u-support.patch
@@ -0,0 +1,39 @@
+--- a/arch/mips/ath79/Kconfig
++++ b/arch/mips/ath79/Kconfig
+@@ -441,6 +441,16 @@ config ATH79_MACH_TL_MR11U
+     select ATH79_DEV_USB
+     select ATH79_DEV_WMAC
+ 
++config ATH79_MACH_TL_MR13U
++    bool "TP-LINK TL-MR13U support"
++    select SOC_AR933X
++    select ATH79_DEV_ETH
++    select ATH79_DEV_GPIO_BUTTONS
++    select ATH79_DEV_LEDS_GPIO
++    select ATH79_DEV_M25P80
++    select ATH79_DEV_USB
++    select ATH79_DEV_WMAC
++
+ config ATH79_MACH_TL_MR3020
+     bool "TP-LINK TL-MR3020 support"
+     select SOC_AR933X
+--- a/arch/mips/ath79/Makefile
++++ b/arch/mips/ath79/Makefile
+@@ -75,6 +75,7 @@ obj-$(CONFIG_ATH79_MACH_TEW_632BRP)    += m
+ obj-$(CONFIG_ATH79_MACH_TEW_673GRU)    += mach-tew-673gru.o
+ obj-$(CONFIG_ATH79_MACH_TEW_712BR)    += mach-tew-712br.o
+ obj-$(CONFIG_ATH79_MACH_TL_MR11U)    += mach-tl-mr11u.o
++obj-$(CONFIG_ATH79_MACH_TL_MR13U)    += mach-tl-mr13u.o
+ obj-$(CONFIG_ATH79_MACH_TL_MR3020)    += mach-tl-mr3020.o
+ obj-$(CONFIG_ATH79_MACH_TL_MR3X20)    += mach-tl-mr3x20.o
+ obj-$(CONFIG_ATH79_MACH_TL_WA901ND)    += mach-tl-wa901nd.o
+--- a/arch/mips/ath79/machtypes.h
++++ b/arch/mips/ath79/machtypes.h
+@@ -72,6 +72,7 @@ enum ath79_mach_type {
+     ATH79_MACH_TEW_673GRU,        /* TRENDnet TEW-673GRU */
+     ATH79_MACH_TEW_712BR,        /* TRENDnet TEW-712BR */
+     ATH79_MACH_TL_MR11U,        /* TP-LINK TL-MR11U */
++    ATH79_MACH_TL_MR13U,        /* TP-LINK TL-MR13U */
+     ATH79_MACH_TL_MR3020,        /* TP-LINK TL-MR3020 */
+     ATH79_MACH_TL_MR3040,        /* TP-LINK TL-MR3040 */
+     ATH79_MACH_TL_MR3220,        /* TP-LINK TL-MR3220 */
diff --git a/tools/firmware-utils/src/mktplinkfw.c b/tools/firmware-utils/src/mktplinkfw.c
index 2be6335..595e6f9 100644
--- a/tools/firmware-utils/src/mktplinkfw.c
+++ b/tools/firmware-utils/src/mktplinkfw.c
@@ -30,6 +30,7 @@
 #define ALIGN(x,a) ({ typeof(a) __a = (a); (((x) + __a - 1) & ~(__a - 1)); })
 
 #define HEADER_VERSION_V1    0x01000000
+#define HWID_TL_MR13U_V1    0x00130101
 #define HWID_TL_MR3020_V1    0x30200001
 #define HWID_TL_MR3220_V1    0x32200001
 #define HWID_TL_MR3420_V1    0x34200001
@@ -179,6 +180,11 @@ static struct flash_layout layouts[] = {
 
 static struct board_info boards[] = {
     {
+        .id        = "TL-MR13Uv1",
+        .hw_id        = HWID_TL_MR13U_V1,
+        .hw_rev        = 1,
+        .layout_id    = "4Mlzma",
+    }, {
         .id        = "TL-MR3020v1",
         .hw_id        = HWID_TL_MR3020_V1,
         .hw_rev        = 1,

You can get a patch file, firmware images and some packages from MEGA:

20130807 (Folder Link, 38.1 MiB)
https://mega.co.nz/#F!UVQmibwD!YYg-tmcyCaZpKtmAOpPsBA

WARNING: I had no time to test this build, so use it at your own risk (or wait till I get some time to test it).


@otlabs I installed your factory version from this post but it's got a password, can you please make it public or send it to me at peterstavroulakis@hotmail.com as I've installed it on two routers now!! Thanks.