Re: TP-Link TL-MR13U - small router with built-in 10,400 mAh battery

Hello all, I have just installed the squashfs sysupgrade Attitude Adjustment image from otlabs' post on 2013-08-08 00:26:45 but I cannot seem to be able to get opkg running properly, it is looking for .../attitude_adjustment/12.09.1/.. which does not exist on the server as it only goes up to 12.09. Any ideas?

Re: TP-Link TL-MR13U - small router with built-in 10,400 mAh battery

This router seems to be the new version of mr13u with sd card reader....
http://translate.google.com.co/translat … mp;act=url

Re: TP-Link TL-MR13U - small router with built-in 10,400 mAh battery

Nice device, but it has a built-in 3G modem too.

Re: TP-Link TL-MR13U - small router with built-in 10,400 mAh battery

otlabs wrote:

Nice device, but it has a built-in 3G modem too.

Yes it is true . it is the next version of http://www.aliexpress.com/store/product … 07666.html
with the case of mr13u .

80 (edited by jmac928 2013-10-02 14:22:37)

Re: TP-Link TL-MR13U - small router with built-in 10,400 mAh battery

Hello
Any one could help me with this problem...
recently i tried the    mr13u new image     


  _______                     ________        __
|       |.-----.-----.-----.|  |  |  |.----.|  |_
|   -   ||  _  |  -__|     ||  |  |  ||   _||   _|
|_______||   __|_____|__|__||________||__|  |____|
          |__| W I R E L E S S   F R E E D O M
-----------------------------------------------------
BARRIER BREAKER (Bleeding Edge, r38248)






   but when i tried to install usb support i receive this
>
> opkg update
> Downloading http://downloads.openwrt.org/snapshots/ … ckages.gz.
> Updated list of available packages in /var/opkg-lists/barrier_breaker.
>
> opkg install kmod-usb-uhci
> Updated list of available packages in /var/opkg-lists/barrier_breaker.opkg install kmod-usb-uhci
>
> insmod uhci
> kmod: missing module (null)
> kmod: failed to insert (null)
>
> opkg install kmod-usb-ohci
> Package kmod-usb-ohci (3.10.12-1) installed in root is up to date.
>
> insmod usb-ohci
> kmod: missing module (null)
> kmod: failed to insert (null)
>
>
>
> any help i will appreciate it

Re: TP-Link TL-MR13U - small router with built-in 10,400 mAh battery

why are you trying to insmod them? what usb device are you trying to connect? post last dmesg lines when you plug it...

Re: TP-Link TL-MR13U - small router with built-in 10,400 mAh battery

Thanks for your reply.
I just installed the openwrt image and then tried to installusb support like says this page http://wiki.openwrt.org/doc/howto/usb.essentials
but the result is
insmod uhci
> kmod: missing module (null)
> kmod: failed to insert (null)
>
> opkg install kmod-usb-ohci
> Package kmod-usb-ohci (3.10.12-1) installed in root is up to date.
>
> insmod usb-ohci
> kmod: missing module (null)
> kmod: failed to insert (null)
>

I need usb support for a usb flash drive.

Re: TP-Link TL-MR13U - small router with built-in 10,400 mAh battery

_______                     ________        __
|       |.-----.-----.-----.|  |  |  |.----.|  |_
|   -   ||  _  |  -__|     ||  |  |  ||   _||   _|
|_______||   __|_____|__|__||________||__|  |____|
          |__| W I R E L E S S   F R E E D O M
-----------------------------------------------------
BARRIER BREAKER (Bleeding Edge, r38248)
-----------------------------------------------------
  * 1/2 oz Galliano         Pour all ingredients into
  * 4 oz cold Coffee        an irish coffee mug filled
  * 1 1/2 oz Dark Rum       with crushed ice. Stir.
  * 2 tsp. Creme de Cacao
-----------------------------------------------------
root@OpenWrt:~# ping google.com
PING google.com (190.248.35.30): 56 data bytes
64 bytes from 190.248.35.30: seq=0 ttl=60 time=15.683 ms
64 bytes from 190.248.35.30: seq=1 ttl=60 time=14.746 ms
64 bytes from 190.248.35.30: seq=2 ttl=60 time=14.444 ms
64 bytes from 190.248.35.30: seq=3 ttl=60 time=16.158 ms
64 bytes from 190.248.35.30: seq=4 ttl=60 time=16.288 ms
^C
--- google.com ping statistics ---
5 packets transmitted, 5 packets received, 0% packet loss
round-trip min/avg/max = 14.444/15.463/16.288 ms
root@OpenWrt:~# opkg install kmod-usb-uhci
Package kmod-usb-uhci (3.10.13-1) installed in root is up to date.
root@OpenWrt:~# insmod uhci
kmod: missing module (null)
kmod: failed to insert (null)
root@OpenWrt:~# opkg install kmod-usb-ohci
Package kmod-usb-ohci (3.10.13-1) installed in root is up to date.
root@OpenWrt:~# insmod usb-ohci
kmod: missing module (null)
kmod: failed to insert (null)
root@OpenWrt:~# dmesg
[    0.000000] Linux version 3.10.13 (openwrt@carme) (gcc version 4.6.4 (OpenWrt                                      /Linaro GCC 4.6-2013.05 r38248) ) #1 Mon Sep 30 04:50:52 PDT 2013
[    0.000000] MyLoader: sysp=07b3bfca, boardp=b3199526, parts=de1baeea
[    0.000000] bootconsole [early0] enabled
[    0.000000] CPU revision is: 00019374 (MIPS 24Kc)
[    0.000000] SoC: Atheros AR9330 rev 1
[    0.000000] Clocks: CPU:400.000MHz, DDR:400.000MHz, AHB:200.000MHz, Ref:25.00                                      0MHz
[    0.000000] Determined physical RAM map:
[    0.000000]  memory: 02000000 @ 00000000 (usable)
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x00000000-0x01ffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00000000-0x01ffffff]
[    0.000000] On node 0 totalpages: 8192
[    0.000000] free_area_init_node: node 0, pgdat 80322b60, node_mem_map 8100000                                      0
[    0.000000]   Normal zone: 64 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 8192 pages, LIFO batch:0
[    0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
[    0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32                                       bytes
[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[    0.000000] pcpu-alloc: [0] 0
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pag                                      es: 8128
[    0.000000] Kernel command line:  board=TL-MR13U console=ttyATH0,115200 rootf                                      stype=squashfs,jffs2 noinitrd
[    0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
[    0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Writing ErrCtl register=00000000
[    0.000000] Readback ErrCtl register=00000000
[    0.000000] Memory: 28716k/32768k available (2312k kernel code, 4052k reserve                                      d, 604k data, 216k init, 0k highmem)
[    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] NR_IRQS:51
[    0.080000] Calibrating delay loop... 265.42 BogoMIPS (lpj=1327104)
[    0.080000] pid_max: default: 32768 minimum: 301
[    0.080000] Mount-cache hash table entries: 512
[    0.090000] NET: Registered protocol family 16
[    0.100000] MIPS: machine is TP-LINK TL-MR13U v1
[    0.350000] bio: create slab <bio-0> at 0
[    0.360000] Switching to clocksource MIPS
[    0.360000] NET: Registered protocol family 2
[    0.370000] TCP established hash table entries: 512 (order: 0, 4096 bytes)
[    0.370000] TCP bind hash table entries: 512 (order: -1, 2048 bytes)
[    0.370000] TCP: Hash tables configured (established 512 bind 512)
[    0.380000] TCP: reno registered
[    0.380000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.390000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.400000] NET: Registered protocol family 1
[    0.400000] PCI: CLS 0 bytes, default 32
[    0.420000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.420000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORIT                                      Y) (c) 2001-2006 Red Hat, Inc.
[    0.430000] msgmni has been set to 56
[    0.440000] io scheduler noop registered
[    0.440000] io scheduler deadline registered (default)
[    0.450000] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
[    0.460000] ar933x-uart: ttyATH0 at MMIO 0x18020000 (irq = 11) is a AR933X UA                                      RT
[    0.460000] console [ttyATH0] enabled, bootconsole disabled
[    0.480000] ath79-spi ath79-spi: master is unqueued, this is deprecated
[    0.490000] m25p80 spi0.0: found en25q64, expected m25p80
[    0.490000] m25p80 spi0.0: en25q64 (8192 Kbytes)
[    0.490000] 5 tp-link partitions found on MTD device spi0.0
[    0.500000] Creating 5 MTD partitions on "spi0.0":
[    0.500000] 0x000000000000-0x000000020000 : "u-boot"
[    0.510000] 0x000000020000-0x0000001234a8 : "kernel"
[    0.510000] mtd: partition "kernel" must either start or end on erase block b                                      oundary or be smaller than an erase block -- forcing read-only
[    0.530000] 0x0000001234a8-0x0000007f0000 : "rootfs"
[    0.530000] mtd: partition "rootfs" must either start or end on erase block b                                      oundary or be smaller than an erase block -- forcing read-only
[    0.550000] mtd: partition "rootfs" set to be root filesystem
[    0.550000] 1 squashfs-split partitions found on MTD device rootfs
[    0.560000] 0x0000002e0000-0x0000007f0000 : "rootfs_data"
[    0.560000] 0x0000007f0000-0x000000800000 : "art"
[    0.570000] 0x000000020000-0x0000007f0000 : "firmware"
[    0.590000] libphy: ag71xx_mdio: probed
[    0.590000] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode:MII
[    1.150000] ag71xx ag71xx.0 eth0: connected to PHY at ag71xx-mdio.1:04 [uid=0                                      04dd041, driver=Generic PHY]
[    1.160000] TCP: cubic registered
[    1.160000] NET: Registered protocol family 17
[    1.160000] Bridge firewalling registered
[    1.170000] 8021q: 802.1Q VLAN Support v1.8
[    1.180000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
[    1.190000] Freeing unused kernel memory: 216K (8033a000 - 80370000)
[    4.040000] usbcore: registered new interface driver usbfs
[    4.040000] usbcore: registered new interface driver hub
[    4.050000] usbcore: registered new device driver usb
[    4.060000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    4.060000] ehci-platform: EHCI generic platform driver
[    4.070000] ehci-platform ehci-platform: EHCI Host Controller
[    4.070000] ehci-platform ehci-platform: new USB bus registered, assigned bus                                       number 1
[    4.080000] ehci-platform ehci-platform: irq 3, io mem 0x1b000000
[    4.110000] ehci-platform ehci-platform: USB 2.0 started, EHCI 1.00
[    4.110000] hub 1-0:1.0: USB hub found
[    4.110000] hub 1-0:1.0: 1 port detected
[    4.120000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    7.240000] eth0: link up (100Mbps/Full duplex)
[    7.750000] jffs2: notice: (322) jffs2_build_xattr_subsystem: complete buildi                                      ng xattr subsystem, 1 of xdatum (0 unchecked, 0 orphan) and 13 of xref (0 dead,                                       2 orphan) found.
[    7.790000] eth0: link down
[    8.900000] NET: Registered protocol family 10
[    8.920000] nf_conntrack version 0.5.0 (452 buckets, 1808 max)
[    8.930000] ip6_tables: (C) 2000-2006 Netfilter Core Team
[    8.960000] uhci_hcd: USB Universal Host Controller Interface driver
[    8.970000] Loading modules backported from Linux version master-2013-06-27-0                                      -gdcfa6d5
[    8.980000] Backport generated by backports.git backports-20130617-4-ge3220f5
[    8.990000] ip_tables: (C) 2000-2006 Netfilter Core Team
[    9.040000] xt_time: kernel timezone is -0000
[    9.070000] cfg80211: Calling CRDA to update world regulatory domain
[    9.070000] cfg80211: World regulatory domain updated:
[    9.080000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gai                                      n, max_eirp)
[    9.080000] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 20                                      00 mBm)
[    9.090000] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 20                                      00 mBm)
[    9.100000] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 20                                      00 mBm)
[    9.110000] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 20                                      00 mBm)
[    9.110000] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 20                                      00 mBm)
[    9.200000] PPP generic driver version 2.4.2
[    9.200000] NET: Registered protocol family 24
[    9.280000] ath: EEPROM regdomain: 0x0
[    9.280000] ath: EEPROM indicates default country code should be used
[    9.280000] ath: doing EEPROM country->regdmn map search
[    9.280000] ath: country maps to regdmn code: 0x3a
[    9.280000] ath: Country alpha2 being used: US
[    9.280000] ath: Regpair used: 0x3a
[    9.290000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[    9.300000] ieee80211 phy0: Atheros AR9330 Rev:1 mem=0xb8100000, irq=2
[    9.310000] cfg80211: Calling CRDA for country: US
[    9.310000] cfg80211: Regulatory domain changed to country: US
[    9.320000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gai                                      n, max_eirp)
[    9.320000] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 27                                      00 mBm)
[    9.330000] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 17                                      00 mBm)
[    9.340000] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 20                                      00 mBm)
[    9.350000] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 20                                      00 mBm)
[    9.360000] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 20                                      00 mBm)
[    9.360000] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 30                                      00 mBm)
[   14.620000] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   14.620000] device eth0 entered promiscuous mode
[   14.630000] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
[   15.270000] eth0: link up (100Mbps/Full duplex)
[   15.270000] br-lan: port 1(eth0) entered forwarding state
[   15.280000] br-lan: port 1(eth0) entered forwarding state
[   15.280000] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   15.300000] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
[   17.280000] br-lan: port 1(eth0) entered forwarding state
[ 1186.290000] usb 1-1: new high-speed USB device number 2 using ehci-platform
root@OpenWrt:~#

Re: TP-Link TL-MR13U - small router with built-in 10,400 mAh battery

But when i try to use usb the process of reading stops....

85 (edited by nebbia88 2013-10-03 05:46:13)

Re: TP-Link TL-MR13U - small router with built-in 10,400 mAh battery

the only kmod you need is kmod-usb-storage, and you do not have to use insmod at all afaik.
start from a clean image (restore factory defaults), install usb-storage, then plug the flash drive and post dmesg.

then if you want to mount some fs you will need for exemple kmod-fs-ext4 for ext FS....

http://wiki.openwrt.org/doc/howto/usb.storage

Re: TP-Link TL-MR13U - small router with built-in 10,400 mAh battery

nebbia88 wrote:

the only kmod you need is kmod-usb-storage, and you do not have to use insmod at all afaik.
start from a clean image (restore factory defaults), install usb-storage, then plug the flash drive and post dmesg.

then if you want to mount some fs you will need for exemple kmod-fs-ext4 for ext FS....

http://wiki.openwrt.org/doc/howto/usb.storage



Thanks nebbia88 for your reply
I followed the http://wiki.openwrt.org/doc/howto/usb.storage  suggestion but to continue with this, first you have to obtain basic usb support http://wiki.openwrt.org/doc/howto/usb.essentials and that points me to the same problem

USB Storage

Once you have obtained Basic USB support,

Add USB support to OpenWRT by installing and enabling the following packages:

opkg update
opkg install kmod-usb-uhci
insmod uhci
opkg install kmod-usb-ohci
insmod usb-ohci


and the result is 


login as: root
root@192.168.1.100's password:


BusyBox v1.19.4 (2013-10-03 07:24:50 UTC) built-in shell (ash)
Enter 'help' for a list of built-in commands.

  _______                     ________        __
|       |.-----.-----.-----.|  |  |  |.----.|  |_
|   -   ||  _  |  -__|     ||  |  |  ||   _||   _|
|_______||   __|_____|__|__||________||__|  |____|
          |__| W I R E L E S S   F R E E D O M
-----------------------------------------------------
BARRIER BREAKER (Bleeding Edge, r38294)
-----------------------------------------------------
  * 1/2 oz Galliano         Pour all ingredients into
  * 4 oz cold Coffee        an irish coffee mug filled
  * 1 1/2 oz Dark Rum       with crushed ice. Stir.
  * 2 tsp. Creme de Cacao
-----------------------------------------------------
root@OpenWrt:~# ping google.com
PING google.com (190.248.35.49): 56 data bytes
64 bytes from 190.248.35.49: seq=0 ttl=60 time=13.578 ms
64 bytes from 190.248.35.49: seq=1 ttl=60 time=13.135 ms
64 bytes from 190.248.35.49: seq=2 ttl=60 time=15.621 ms
^C
--- google.com ping statistics ---
3 packets transmitted, 3 packets received, 0% packet loss
round-trip min/avg/max = 13.135/14.111/15.621 ms
root@OpenWrt:~# opkg update
Downloading http://downloads.openwrt.org/snapshots/ … es/Package             s.gz.
Updated list of available packages in /var/opkg-lists/barrier_breaker.
root@OpenWrt:~# opkg install kmod-usb-uhci
Installing kmod-usb-uhci (3.10.13-1) to root...
Downloading http://downloads.openwrt.org/snapshots/ … es/kmod-us             b-uhci_3.10.13-1_ar71xx.ipk.
Configuring kmod-usb-uhci.
root@OpenWrt:~# insmod uhci
kmod: missing module (null)
kmod: failed to insert (null)
root@OpenWrt:~# opkg install kmod-usb-ohci
Package kmod-usb-ohci (3.10.13-1) installed in root is up to date.
root@OpenWrt:~# insmod usb-ohci
kmod: missing module (null)
kmod: failed to insert (null)
root@OpenWrt:~#

Thanks again for your help.

Re: TP-Link TL-MR13U - small router with built-in 10,400 mAh battery

TL-TR861 10400E

http://translate.google.com/translate?h … ;sandbox=1

429 yuan = 51€ = 70USD

Re: TP-Link TL-MR13U - small router with built-in 10,400 mAh battery

Need help, guys.
I have bought this device for use with 3g modems. Installed trunk version. Cannot install luci - "No space left on device". What should I do now? Looks like I can install AA which is smaller and already have luci. But how to do this from trunk? And what about AA and 3G modems? Or maybe there is any other way to get trunk and luci working?

89 (edited by vladorion 2013-11-14 18:57:38)

Re: TP-Link TL-MR13U - small router with built-in 10,400 mAh battery

How to install AA over trunk? As I can see there is no ready AA version for the device, but I can find some "patches". Also the procedure of downgrading is not clear.

90 (edited by obadi.mi.se 2013-11-15 09:04:28)

Re: TP-Link TL-MR13U - small router with built-in 10,400 mAh battery

hello all!
first of all thanks to the contributors for this project!
since i read about the piratebox i instantly liked the idea behind it. therefor i bought the mr13u.
i installed openwrt and then continued to piratebox
but unfortunately already few times it get stucked here:

Configuring python-mini.
Configuring python.
Configuring piratebox.
/etc/rc.common: line 139: /opt/piratebox/init.d/piratebox_router: not found
losetup: /dev/loop0: detach failed: No such device or address
Command failed: Not found


or here:

Installing python-mini (2.7.3-2) to piratebox...
Downloading h t t p : / / downloads.openwrt.org/snapshots/trunk/ar71xx/packages/python-mini_2.7.3-2_ar71xx.ipk

or
screenshot:
https://bayimg.com/PACEFaAfH

i have wifi access, ssh, can connect to inet through home router......
but no piratebox interface in the browser....
i've been struggling for few days...
any ideas?!?!?

thanks!

Re: TP-Link TL-MR13U - small router with built-in 10,400 mAh battery

Hello all,

today i received the TL-MR13U from china. I successfully installed the last snapshot.

after this i configured my network to get an internet connection, it worked just fine:

uci set network.lan.proto=static
uci set network.lan.ipaddr=192.168.1.250
uci set network.lan.netmask=255.255.255.0
uci set network.lan.gateway=192.168.1.1
uci set network.lan.dns=8.8.8.8
/etc/init.d/network restart

the next thing i was trying is to install luci but it failed: (No space left on device. as like vladorion)



BusyBox v1.19.4 (2013-11-15 17:04:27 EST) built-in shell (ash)
Enter 'help' for a list of built-in commands.

  _______                     ________        __
|       |.-----.-----.-----.|  |  |  |.----.|  |_
|   -   ||  _  |  -__|     ||  |  |  ||   _||   _|
|_______||   __|_____|__|__||________||__|  |____|
          |__| W I R E L E S S   F R E E D O M
-----------------------------------------------------
BARRIER BREAKER (Bleeding Edge, r38805)
-----------------------------------------------------
  * 1/2 oz Galliano         Pour all ingredients into
  * 4 oz cold Coffee        an irish coffee mug filled
  * 1 1/2 oz Dark Rum       with crushed ice. Stir.
  * 2 tsp. Creme de Cacao
-----------------------------------------------------
root@OpenWrt:/# uname -a
Linux OpenWrt 3.10.18 #1 Fri Nov 15 17:30:36 EST 2013 mips GNU/Linux
root@OpenWrt:/# free
             total         used         free       shared      buffers
Mem:         28924        17320        11604            0         1580
-/+ buffers:              15740        13184
Swap:            0            0            0
root@OpenWrt:/# df -h
Filesystem                Size      Used Available Use% Mounted on
rootfs                  768.0K    384.0K    384.0K  50% /
/dev/root                 2.0M      2.0M         0 100% /rom
tmpfs                    14.1M     60.0K     14.1M   0% /tmp
/dev/mtdblock3          768.0K    384.0K    384.0K  50% /overlay
overlayfs:/overlay      768.0K    384.0K    384.0K  50% /
tmpfs                   512.0K         0    512.0K   0% /dev
root@OpenWrt:/# opkg update
Downloading http://downloads.openwrt.org/snapshots/ … ckages.gz.
Updated list of available packages in /var/opkg-lists/barrier_breaker.
root@OpenWrt:/# opkg install luci
Installing luci (svn-r9934-1) to root...
Downloading http://downloads.openwrt.org/snapshots/ … r71xx.ipk.
Installing uhttpd (2013-11-11-881d6102cf1f7bc6b54ab395c5e4addbfe1ed34c) to root...
Downloading http://downloads.openwrt.org/snapshots/ … r71xx.ipk.
Installing uhttpd-mod-ubus (2013-11-11-881d6102cf1f7bc6b54ab395c5e4addbfe1ed34c) to root...
Downloading http://downloads.openwrt.org/snapshots/ … r71xx.ipk.
Installing luci-mod-admin-full (svn-r9934-1) to root...
Downloading http://downloads.openwrt.org/snapshots/ … r71xx.ipk.
Installing luci-mod-admin-core (svn-r9934-1) to root...
Downloading http://downloads.openwrt.org/snapshots/ … r71xx.ipk.
Installing luci-lib-web (svn-r9934-1) to root...
Downloading http://downloads.openwrt.org/snapshots/ … r71xx.ipk.
Installing luci-lib-core (svn-r9934-1) to root...
Downloading http://downloads.openwrt.org/snapshots/ … r71xx.ipk.
Installing lua (5.1.5-1) to root...
Downloading http://downloads.openwrt.org/snapshots/ … r71xx.ipk.
Installing liblua (5.1.5-1) to root...
Downloading http://downloads.openwrt.org/snapshots/ … r71xx.ipk.
Installing libuci-lua (2013-10-15.1-1) to root...
Downloading http://downloads.openwrt.org/snapshots/ … r71xx.ipk.
Installing libubus-lua (2013-11-07-8ea96670367e5dd23988b51ee4f0f790393effaf) to root...
Downloading http://downloads.openwrt.org/snapshots/ … r71xx.ipk.
Installing luci-lib-sys (svn-r9934-1) to root...
Downloading http://downloads.openwrt.org/snapshots/ … r71xx.ipk.
Installing luci-lib-nixio (svn-r9934-1) to root...
Downloading http://downloads.openwrt.org/snapshots/ … r71xx.ipk.
Installing luci-sgi-cgi (svn-r9934-1) to root...
Downloading http://downloads.openwrt.org/snapshots/ … r71xx.ipk.
Installing luci-proto-core (svn-r9934-1) to root...
Downloading http://downloads.openwrt.org/snapshots/ … r71xx.ipk.
Installing luci-i18n-english (svn-r9934-1) to root...
Downloading http://downloads.openwrt.org/snapshots/ … r71xx.ipk.
Installing luci-lib-ipkg (svn-r9934-1) to root...
Downloading http://downloads.openwrt.org/snapshots/ … r71xx.ipk.
Installing luci-theme-bootstrap (svn-r9934-1) to root...
Downloading http://downloads.openwrt.org/snapshots/ … r71xx.ipk.
Installing luci-theme-base (svn-r9934-1) to root...
Downloading http://downloads.openwrt.org/snapshots/ … r71xx.ipk.
Configuring luci-lib-sys.
Configuring liblua.
Configuring libuci-lua.
Configuring lua.
Configuring libubus-lua.
Configuring luci-lib-core.
Configuring luci-lib-nixio.
Configuring luci-sgi-cgi.
Configuring luci-lib-web.
Configuring luci-proto-core.
Configuring luci-i18n-english.
uci: I/O error
Configuring luci-mod-admin-core.
ln: /etc/rc.d/S05luci_fixtime: No space left on device
ln: /etc/rc.d/K95luci_fixtime: No space left on device
ln: /etc/rc.d/S59luci_dhcp_migrate: No space left on device
Configuring luci-theme-bootstrap.
Configuring luci-lib-ipkg.
Configuring luci-mod-admin-full.
Configuring uhttpd.
Configuring uhttpd-mod-ubus.
Collected errors:
* wfopen: //usr/lib/opkg/info/luci-theme-bootstrap.postinst: No space left on device.
* wfopen: //usr/lib/opkg/info/luci-theme-bootstrap.control: No space left on device.
* extract_archive: Cannot make dir /www/luci-static/bootstrap/: No space left on device.
* wfopen: /www/luci-static/bootstrap/html5.js: No such file or directory.
* wfopen: /www/luci-static/bootstrap/mobile.css: No such file or directory.
* wfopen: /www/luci-static/bootstrap/favicon.ico: No such file or directory.
* wfopen: /www/luci-static/bootstrap/cascade.css: No such file or directory.
* wfopen: /etc/uci-defaults/luci-theme-bootstrap: No space left on device.
* set_flags_from_control: Failed to open //usr/lib/opkg/info/luci-theme-bootstrap.control: No such file or directory.
* wfopen: /www/luci-static/resources/icons/tunnel_disabled.png: No space left on device.
* wfopen: /www/luci-static/resources/icons/wifi_big_disabled.png: No space left on device.
* wfopen: /www/luci-static/resources/icons/switch_disabled.png: No space left on device.
* wfopen: /www/luci-static/resources/icons/bridge.png: No space left on device.
* wfopen: /www/luci-static/resources/icons/signal-none.png: No space left on device.
* wfopen: /www/luci-static/resources/icons/vlan_disabled.png: No space left on device.
* wfopen: /www/luci-static/resources/icons/port_down.png: No space left on device.
* wfopen: /www/luci-static/resources/icons/vlan.png: No space left on device.
* wfopen: /www/luci-static/resources/icons/bridge_disabled.png: No space left on device.
* wfopen: /www/luci-static/resources/icons/encryption.png: No space left on device.
* wfopen: /www/luci-static/resources/icons/wifi_big.png: No space left on device.
* wfopen: /www/luci-static/resources/icons/ethernet_disabled.png: No space left on device.
* wfopen: /www/luci-static/resources/icons/tunnel.png: No space left on device.
* wfopen: /www/luci-static/resources/icons/wifi.png: No space left on device.
* wfopen: /www/luci-static/resources/icons/signal-75-100.png: No space left on device.
* wfopen: /www/luci-static/resources/icons/signal-0-25.png: No space left on device.
* wfopen: /www/luci-static/resources/icons/ethernet.png: No space left on device.
* wfopen: /www/luci-static/resources/icons/switch.png: No space left on device.
* pkg_write_filelist: Failed to open //usr/lib/opkg/info/luci-theme-base.list: No space left on device.
* opkg_install_pkg: Failed to extract data files for luci-theme-base. Package debris may remain!
* opkg_install_cmd: Cannot install package luci.
* opkg_conf_write_status_files: Can't open status file //usr/lib/opkg/status: No space left on device.
root@OpenWrt:/#

two year ago i had the wr703n (same specs) and luci was working fine.


is there a solution for this?

Thanks in advance!

Re: TP-Link TL-MR13U - small router with built-in 10,400 mAh battery

Finally Luci is working, i compiled the firmware from source including luci.

The only thing i was changing is to activate luci

- Compiling for Dummies
- Image of working LUCI

Images: (use at your own risk)
- Sysupgrade including Luci
- Factory image including Luci (not tested)
- md5sums


Another question:

Is there a tutorial, how to add not included drivers? I'd like to add the ASIX AX88772A USB Network Bridge


Thanks

Re: TP-Link TL-MR13U - small router with built-in 10,400 mAh battery

Xylen.C4 wrote:

Finally Luci is working, i compiled the firmware from source including luci.

Good news!

Can you explain me how to upgrade to your build? I have trunk installed but without luci.

94 (edited by Xylen.C4 2013-11-17 11:10:17)

Re: TP-Link TL-MR13U - small router with built-in 10,400 mAh battery

Depens how much you know, do you already know how to work with putty/telnet?
Do you know how to get access to your local network/internet for your TL-MR13U?

The main thing is to get the Firmware to the /tmp folder of your TL-MR13U! There are many ways to do this!

You can use this tutorial: OpenWrt Sysupgrade

95 (edited by bjarte.o.kvamme 2013-11-19 18:03:21)

Re: TP-Link TL-MR13U - small router with built-in 10,400 mAh battery

Does anybody have problems with the charging of the device?

I can't seem to get past the one bar, which I assume corresponds to 25% of the capacity. I have had two devices, and both seem to stop at one bar.

When it reaches one bar, the "indicator" strips goes dark, and doesn't turn on.

When I press the battery button, it shows just the one bar.

I have tried multiple cables and chargers, but it does not go past one bar.

edit: Is there a way to read current battery status from shell?

Re: TP-Link TL-MR13U - small router with built-in 10,400 mAh battery

Xylen.C4 wrote:

Finally Luci is working, i compiled the firmware from source including luci.

The only thing i was changing is to activate luci

- Compiling for Dummies
- Image of working LUCI

Images: (use at your own risk)
- Sysupgrade including Luci
- Factory image including Luci (not tested)
- md5sums


Another question:

Is there a tutorial, how to add not included drivers? I'd like to add the ASIX AX88772A USB Network Bridge


Thanks

thanks for your work.
so if I want to install openwrt from factory firmware I just need to download your "Factory image including Luci" then flash from web? and after that can I simply login from web without telnet stuff?

Re: TP-Link TL-MR13U - small router with built-in 10,400 mAh battery

@charia

Yes but i've never tested this image! (Factory Image)

Using this images is at your own risk!

Re: TP-Link TL-MR13U - small router with built-in 10,400 mAh battery

bjarte.o.kvamme wrote:

Does anybody have problems with the charging of the device?

I can't seem to get past the one bar, which I assume corresponds to 25% of the capacity. I have had two devices, and both seem to stop at one bar.

When it reaches one bar, the "indicator" strips goes dark, and doesn't turn on.

When I press the battery button, it shows just the one bar.

I have tried multiple cables and chargers, but it does not go past one bar.

edit: Is there a way to read current battery status from shell?

Seems like a common case of user stupidity.

I thought that the entire blue strip should be filled when the battery was fully charged, but no.

http://bildr.no/thumb/ZzBrUEhP.jpeg

The bottom one is fully charged, while the top one has < 25% of juice left. Good to know.

Oh well, a great device, so it doesn't hurt to have two smile

99 (edited by Xylen.C4 2013-11-21 23:22:41)

Re: TP-Link TL-MR13U - small router with built-in 10,400 mAh battery

Today i was trying to connect my UMTS dongle to the device. Therefore i made a new image including the necessarily packages but it was not working at all.... i was not able to see the "ttyUSB1".

unfourtuanely the last  kmod-usb-serial (online source) is not working with my image...

after i recognized it i was taken the packages which where generated with my image ... after it it was working successfully!


If you want to use my packages you have to make them visible for your router & you also have to change the sorurce for example at luci  (dont forget to update the packages after changing the source e.g.  "opkg update")


Im working with the dongle "Bus 001 Device 003: ID 12d1:1003 Huawei Technologies Co., Ltd. E220 HSDPA Modem / E230/E270/E870 HSDPA/HSUPA Modem"



Link to the tutorial which was working for me



For the moment i dont have this battery problem... annoying thing, did you contact TP-Link because of this?

The Router is working well... no problems at all (expecting this annoying UMTS thing)

Uptime is at the moment 30h (mostly no clients) an there is till one LED on (approx. 25%)

Re: TP-Link TL-MR13U - small router with built-in 10,400 mAh battery

Xylen.C4 wrote:

Depens how much you know, do you already know how to work with putty/telnet?
Do you know how to get access to your local network/internet for your TL-MR13U?

The main thing is to get the Firmware to the /tmp folder of your TL-MR13U! There are many ways to do this!

You can use this tutorial: OpenWrt Sysupgrade

Updated router with your image, thanks a lot. Sysupgrade didn't work but mtd worked fine.

I suppose to use the router with 3G modems (mostly Huawei)? Are you experienced problems with it?