XE3000 questions

I run 24.10.0 on GL.iNet XE3000 and all works excellent. Thanks and congratulations to all people here who helped me and all developers who implemented the necessary code.

I have two questions:

  • is there a way to inspect or monitor battery percentage ?

  • has anyone upgraded modem software using QFirehose ?

NoFanTasi,

I read some of your posts on Gl Inet forum and here, I think I am in a similar situation but with my Puli AX XE3000 router. I had OpenWRT(24.10.0 bin), and the OpenWRT uboot firmware (24.10.0 kernel bin) loaded on my XE3000, and tried switching back to tue Gl Inet (XE3000-4.7.4-0317 bin) and cannot reach my router via uboot, recovery, 192.168.1.1 Luci and B2l.html. And with the new OpenWRT I cannot hold the reset + power button to recover via uboot. I reached out to Gl Inet but haven't heard back, do you or anyone else have any suggestions, or will I have to send it back? Thank you!

@Jbck74 sorry for late reaction. My situation was different I never tried to switch back from OpenWRT (24.10.0) to GlL.iNet (4.7.x). In fact, to my knowledge I did not flash OpenWRT uboot firmware (24.10.0) unless if flashing openwrt-24.10.0-mediatek-filogic-glinet_gl-xe3000-squashfs-sysupgrade.bin includes OpenWRT uboot firmware (24.10.0). By the way, how did you flash OpenWRT+uboot? My mistake was to cut&paste 'sysupgrade -F -v -n /tmp/openwrt-mediatek-filogic-glinet_gl-x3000-squashfs-sysupgrade.bin' with nonexisting file :blush:.

Somehow (I think perhaps by first doing factory reset pressing reset 10 seconds) I eventually got into regular uboot from where I then flashed.