Wrt32x / snapshot sysupgrade - config not saved

hnyman · March 7, 2023, 6:05pm

That is normal.
It came with kernel 5.15, if I remember right.
Upstream Linux started to "helpfully" warn about non-UBI FS on NAND flash (also for wifi calibration etc. read-only partitions)

But you might be interested in

github.com/openwrt/openwrt

ipq40xx, EA8300, DSA (master), sysupgrade does not restore settings

opened 01:22AM - 03 Jan 23 UTC

closed 02:43PM - 26 Mar 23 UTC

jeffsf

bug

### Describe the bug After installing a local build off commit c9a7c00f80 (m…aster) Author: Olliver Schinagl <oliver@schinagl.nl> Date: Tue Dec 13 16:35:37 2022 +0100 using the process described at https://github.com/openwrt/openwrt/pull/11405#issuecomment-1336614898 the system boots into the new firmware. After modifying the config and confirming `option compat_version '2.0'`, subsequent attempts to `sysupgrade` to the new firmware on the other partition flash the firmware, but do not preserve the config. This occurs with either ``` sysupgrade -u /tmp/OpenWrt-2023-01-02_1321-0800-ipq40xx-generic-linksys_ea8300-squashfs-sysupgrade.bin sysupgrade /tmp/OpenWrt-2023-01-02_1321-0800-ipq40xx-generic-linksys_ea8300-squashfs-sysupgrade.bin ``` ### OpenWrt version r21655+2-c9a7c00f80 ### OpenWrt target/subtarget ipq40xx/generic ### Device Linksys EA8300 ### Image kind Self-built image ### Steps to reproduce ``` root@devel:/# sysupgrade /tmp/Open root@devel:/# sysupgrade /tmp/OpenWrt-2023-01-02_1321-0800-ipq40xx-generic-links ys_ea8300-squashfs-sysupgrade.bin [J Sun Jan 1 22:56:23 PST 2023 upgrade: Saving config files... Sun Jan 1 22:56:24 PST 2023 upgrade: Commencing upgrade. Closing all shell sessions. Watchdog handover: fd=3 - watchdog - Watchdog did not previously reset the system [ 210.720844] ath10k_pci 0000:01:00.0: peer-unmap-event: unknown peer id 2 [ 210.989890] ath10k_pci 0000:01:00.0: peer-unmap-event: unknown peer id 1 Sun Jan 1 22:56:25 PST 2023 upgrade: Sending TERM to remaining processes ... Sun Jan 1 22:56:25 PST 2023 upgrade: Sending signal TERM to wpa_supplicant (1035) Sun Jan 1 22:56:25 PST 2023 upgrade: Sending signal TERM to wpa_supplicant (1058) Sun Jan 1 22:56:25 PST 2023 upgrade: Sending signal TERM to uwsgi (1318) [ 211.229850] ath10k_pci 0000:01:00.0: peer-unmap-event: unknown peer id 3 Sun Jan 1 22:56:29 PST 2023 upgrade: Sending KILL to remaining processes ... [ 221.540212] stage2 (2654): drop_caches: 3 Sun Jan 1 22:56:36 PST 2023 upgrade: Switching to ramdisk... [ 225.903154] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" stops [ 225.926741] UBIFS (ubi0:1): un-mount UBI device 0 Mon Jan 2 06:56:40 UTC 2023 upgrade: Performing system upgrade... [ 226.323527] ubi1: attaching mtd11 [ 226.929591] ubi1: scanning is finished [ 226.939160] ubi1: attached mtd11 (name "rootfs", size 83 MiB) [ 226.939223] ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes [ 226.943978] ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 [ 226.950719] ubi1: VID header offset: 2048 (aligned 2048), data offset: 4096 [ 226.957694] ubi1: good PEBs: 664, bad PEBs: 0, corrupted PEBs: 0 [ 226.964353] ubi1: user volume: 2, internal volumes: 1, max. volumes count: 128 [ 226.970627] ubi1: max/mean erase counter: 6/3, WL threshold: 4096, image sequence number: 1651709940 [ 226.977602] ubi1: available PEBs: 0, total reserved PEBs: 664, PEBs reserved for bad PEB handling: 40 [ 226.986953] ubi1: background thread "ubi_bgt1d" started, PID 3370 UBI device number 1, total 664 LEBs (84312064 bytes, 80.4 MiB), available 0 LEBs (0 bytes), LEB size 126976 bytes (124.0 KiB) Unlocking kernel ... Writing from <stdin> to kernel ... [ ][e][w] Volume ID 0, size 120 LEBs (15237120 bytes, 14.5 MiB), LEB size 126976 bytes (124.0 KiB), dynamic, name "rootfs", alignment 1 Set volume size to 63488000 Volume ID 1, size 500 LEBs (63488000 bytes, 60.5 MiB), LEB size 126976 bytes (124.0 KiB), dynamic, name "rootfs_data", alignment 1 Unlocking kernel ... Writing from <stdin> to kernel ... [ ][e][w][e][w][e][w][e][w][e][w][e][w][e][w][e][w][e][w][e][w][e][w][e][w][e][w][e][w][e][w][e][w][e][w][e][w][e][w][e][w][e][w][e][w][e][w][e][w] Mon Jan 2 06:56:50 UTC 2023 upgrade: Upgrade completed Mon Jan 2 06:56:51 UTC 2023 upgrade: Rebooting system... umount: can't unmount /dev: Resource busy umount: can't unmount /tmp: Resource busy [à Format: Log Type - Time(microsec) - Message - Optional Info Log Type: B - Since Boot(Power On Reset), D - Delta, S - Statistic ``` [...] ``` Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 5.15.85 (jeff@deb-devel) (arm-openwrt-linux-muslgnueabi-gcc (OpenWrt GCC 11.3.0 r21655+1-c9a7c00f80) 11.3.0, GNU ld (GNU Binutils) 2.39) #0 SMP Mon Jan 2 06:46:27 2023 [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Linksys EA8300 (Dallas) [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000080000000-0x000000008fffffff] [ 0.000000] HighMem empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x0000000087dfffff] [ 0.000000] node 0: [mem 0x0000000087e00000-0x0000000087ffffff] [ 0.000000] node 0: [mem 0x0000000088000000-0x000000008fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000008fffffff] [ 0.000000] percpu: Embedded 11 pages/cpu s16332 r8192 d20532 u45056 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 64960 [ 0.000000] Kernel command line: init=/sbin/init rootfstype=ubifs ubi.mtd=11,2048 root=ubi0:ubifs rootwait rw root=/dev/ubiblock0_0 rootfstype=squashfs ro [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes, linear) [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 246208K/262144K available (6618K kernel code, 607K rwdata, 1672K rodata, 1024K init, 237K bss, 15936K reserved, 0K cma-reserved, 0K highmem) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] arch_timer: cp15 timer(s) running at 48.00MHz (virt). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xb11fd3bfb, max_idle_ns: 440795203732 ns [ 0.000001] sched_clock: 56 bits at 48MHz, resolution 20ns, wraps every 4398046511096ns [ 0.000024] Switching to timer-based delay loop, resolution 20ns [ 0.000326] Calibrating delay loop (skipped), value calculated using timer frequency.. 96.00 BogoMIPS (lpj=480000) [ 0.000356] pid_max: default: 32768 minimum: 301 [ 0.000590] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.000619] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.001627] CPU: Testing write buffer coherency: ok [ 0.001980] qcom_scm: convention: smc legacy [ 0.003082] Setting up static identity map for 0x80300000 - 0x8030003c [ 0.003254] rcu: Hierarchical SRCU implementation. [ 0.003508] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.003843] smp: Bringing up secondary CPUs ... [ 0.007107] smp: Brought up 1 node, 4 CPUs [ 0.007143] SMP: Total of 4 processors activated (384.00 BogoMIPS). [ 0.007159] CPU: All CPU(s) started in SVC mode. [ 0.012198] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5 [ 0.012359] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.012394] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.012638] pinctrl core: initialized pinctrl subsystem [ 0.014292] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.014721] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.015797] thermal_sys: Registered thermal governor 'step_wise' [ 0.016218] cpuidle: using governor ladder [ 0.016280] cpuidle: using governor menu [ 0.043146] cryptd: max_cpu_qlen set to 1000 [ 0.047226] usbcore: registered new interface driver usbfs [ 0.047304] usbcore: registered new interface driver hub [ 0.047372] usbcore: registered new device driver usb [ 0.047422] pps_core: LinuxPPS API ver. 1 registered [ 0.047435] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> [ 0.047464] PTP clock support registered [ 0.049488] clocksource: Switched to clocksource arch_sys_counter [ 0.050486] NET: Registered PF_INET protocol family [ 0.050715] IP idents hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.051410] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) [ 0.051462] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.051484] TCP established hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.051526] TCP bind hash table entries: 2048 (order: 2, 16384 bytes, linear) [ 0.051582] TCP: Hash tables configured (established 2048 bind 2048) [ 0.051700] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.051753] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.052024] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.052077] PCI: CLS 0 bytes, default 64 [ 0.054407] workingset: timestamp_bits=14 max_order=16 bucket_order=2 [ 0.059139] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.059167] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. [ 0.192123] qcom-pcie 40000000.pci: host bridge /soc/pci@40000000 ranges: [ 0.192199] qcom-pcie 40000000.pci: IO 0x0040200000..0x00402fffff -> 0x0040200000 [ 0.192237] qcom-pcie 40000000.pci: MEM 0x0040300000..0x0040ffffff -> 0x0040300000 [ 0.371076] qcom-pcie 40000000.pci: iATU unroll: disabled [ 0.371110] qcom-pcie 40000000.pci: Detected iATU regions: 32 outbound, 8 inbound [ 0.471211] qcom-pcie 40000000.pci: Link up [ 0.471373] qcom-pcie 40000000.pci: PCI host bridge to bus 0000:00 [ 0.471395] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.471419] pci_bus 0000:00: root bus resource [io 0x0000-0xfffff] (bus address [0x40200000-0x402fffff]) [ 0.471440] pci_bus 0000:00: root bus resource [mem 0x40300000-0x40ffffff] [ 0.471495] pci 0000:00:00.0: [17cb:1001] type 01 class 0x060400 [ 0.471531] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x00000fff] [ 0.471608] pci 0000:00:00.0: PME# supported from D0 D3hot [ 0.473185] PCI: bus0: Fast back to back transfers disabled [ 0.473458] pci 0000:01:00.0: [168c:0056] type 00 class 0x028000 [ 0.473590] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit] [ 0.474167] pci 0000:01:00.0: PME# supported from D0 D3hot [ 0.475883] PCI: bus1: Fast back to back transfers disabled [ 0.475936] pci 0000:00:00.0: BAR 8: assigned [mem 0x40400000-0x405fffff] [ 0.475962] pci 0000:00:00.0: BAR 0: assigned [mem 0x40300000-0x40300fff] [ 0.475989] pci 0000:01:00.0: BAR 0: assigned [mem 0x40400000-0x405fffff 64bit] [ 0.476061] pci 0000:00:00.0: PCI bridge to [bus 01-ff] [ 0.476083] pci 0000:00:00.0: bridge window [mem 0x40400000-0x405fffff] [ 0.478920] pcieport 0000:00:00.0: AER: enabled with IRQ 102 [ 0.481057] bam-dma-engine 8e04000.dma: num-channels unspecified in dt [ 0.481089] bam-dma-engine 8e04000.dma: num-ees unspecified in dt [ 0.482419] tcsr 1949000.tcsr: setting wifi_glb_cfg = 41000000 [ 0.482526] tcsr 194b000.tcsr: setting usb hs phy mode select = e700e7 [ 0.482620] tcsr 1953000.ess_tcsr: setting ess interface select = 0 [ 0.482715] tcsr 1957000.tcsr: setting wifi_noc_memtype_m0_m2 = 2222222 [ 0.483026] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled [ 0.483560] msm_serial 78af000.serial: msm_serial: detected port #0 [ 0.483610] msm_serial 78af000.serial: uartclk = 1843200 [ 0.483664] 78af000.serial: ttyMSM0 at MMIO 0x78af000 (irq = 32, base_baud = 115200) is a MSM [ 0.483701] msm_serial: console setup on port #0 [ 1.192316] printk: console [ttyMSM0] enabled [ 1.197403] msm_serial: driver initialized [ 1.206365] loop: module loaded [ 1.207966] nand: device found, Manufacturer ID: 0xef, Chip ID: 0xda [ 1.208327] nand: Winbond W29N02GV [ 1.214965] nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64 [ 1.218235] 16 fixed-partitions partitions found on MTD device qcom_nand.0 [ 1.225729] Creating 16 MTD partitions on "qcom_nand.0": [ 1.232563] 0x000000000000-0x000000100000 : "sbl1" [ 1.239636] 0x000000100000-0x000000200000 : "mibib" [ 1.244121] 0x000000200000-0x000000300000 : "qsee" [ 1.248868] 0x000000300000-0x000000380000 : "cdt" [ 1.253302] 0x000000380000-0x000000400000 : "appsblenv" [ 1.258003] 0x000000400000-0x000000480000 : "ART" [ 1.263082] 0x000000480000-0x000000680000 : "appsbl" [ 1.269373] 0x000000680000-0x000000700000 : "u_env" [ 1.272977] 0x000000700000-0x000000740000 : "s_env" [ 1.277318] 0x000000740000-0x000000780000 : "devinfo" [ 1.282222] 0x000000780000-0x000005f80000 : "kernel" [ 1.371703] 0x000000c80000-0x000005f80000 : "rootfs" [ 1.446836] mtd: setting mtd11 (rootfs) as root device [ 1.447175] mtdsplit: no squashfs found in "rootfs" [ 1.450932] 0x000005f80000-0x00000b780000 : "alt_kernel" [ 1.535450] 0x000006480000-0x00000b780000 : "alt_rootfs" [ 1.610775] 0x00000b780000-0x00000b880000 : "sysdiag" [ 1.612213] 0x00000b880000-0x00000ff00000 : "syscfg" [ 1.731758] i2c_dev: i2c /dev entries driver [ 1.733545] sdhci: Secure Digital Host Controller Interface driver [ 1.735109] sdhci: Copyright(c) Pierre Ossman [ 1.741137] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.749007] NET: Registered PF_INET6 protocol family [ 1.752888] Segment Routing with IPv6 [ 1.756261] In-situ OAM (IOAM) with IPv6 [ 1.759884] NET: Registered PF_PACKET protocol family [ 1.764019] 8021q: 802.1Q VLAN Support v1.8 [ 1.768855] Registering SWP/SWPB emulation handler [ 1.784936] qca8k-ipq4019 c000000.switch: configuring for fixed/internal link mode [ 1.785180] qca8k-ipq4019 c000000.switch: Link is Up - 1Gbps/Full - flow control rx/tx [ 1.874218] qca8k-ipq4019 c000000.switch lan1 (uninitialized): PHY [90000.mdio-1:00] driver [Qualcomm QCA8075] (irq=POLL) [ 1.964542] qca8k-ipq4019 c000000.switch lan2 (uninitialized): PHY [90000.mdio-1:01] driver [Qualcomm QCA8075] (irq=POLL) [ 2.054672] qca8k-ipq4019 c000000.switch lan3 (uninitialized): PHY [90000.mdio-1:02] driver [Qualcomm QCA8075] (irq=POLL) [ 2.144545] qca8k-ipq4019 c000000.switch lan4 (uninitialized): PHY [90000.mdio-1:03] driver [Qualcomm QCA8075] (irq=POLL) [ 2.236237] qca8k-ipq4019 c000000.switch wan (uninitialized): PHY [90000.mdio-1:04] driver [Qualcomm QCA8075] (irq=POLL) [ 2.246917] DSA: tree 0 setup [ 2.250895] ubi0: attaching mtd11 [ 2.837351] ubi0: scanning is finished [ 2.846574] ubi0: attached mtd11 (name "rootfs", size 83 MiB) [ 2.846633] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes [ 2.851409] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 [ 2.858099] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096 [ 2.864984] ubi0: good PEBs: 664, bad PEBs: 0, corrupted PEBs: 0 [ 2.871749] ubi0: user volume: 2, internal volumes: 1, max. volumes count: 128 [ 2.877980] ubi0: max/mean erase counter: 6/4, WL threshold: 4096, image sequence number: 1651709940 [ 2.885036] ubi0: available PEBs: 0, total reserved PEBs: 664, PEBs reserved for bad PEB handling: 40 [ 2.894347] ubi0: background thread "ubi_bgt0d" started, PID 134 [ þ[ 2.915531] VFS: Mounted root (squashfs filesystem) readonly on device 254:0. [ 2.917539] Freeing unused kernel image (initmem) memory: 1024K [ 2.952989] Run /sbin/init as init process [ 3.354194] init: Console is alive [ 3.354509] init: - watchdog - [ 4.069516] random: crng init done [ 4.440314] kmodloader: loading kernel modules from /etc/modules-boot.d/* [ 4.730108] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 4.730232] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 4.734783] xhci-hcd xhci-hcd.0.auto: hcc params 0x0228f665 hci version 0x100 quirks 0x0000000002010010 [ 4.742201] xhci-hcd xhci-hcd.0.auto: irq 105, io mem 0x08a00000 [ 4.751695] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 4.757709] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 4.763028] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed [ 4.771248] hub 1-0:1.0: USB hub found [ 4.777186] hub 1-0:1.0: 1 port detected [ 4.781355] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 4.785497] hub 2-0:1.0: USB hub found [ 4.793104] hub 2-0:1.0: 1 port detected [ 4.797096] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller [ 4.800718] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 3 [ 4.806190] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220f665 hci version 0x100 quirks 0x0000000002010010 [ 4.813639] xhci-hcd xhci-hcd.1.auto: irq 106, io mem 0x06000000 [ 4.823095] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller [ 4.829149] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 4 [ 4.834492] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed [ 4.845204] hub 3-0:1.0: USB hub found [ 4.848622] hub 3-0:1.0: 1 port detected [ 4.852795] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. [ 4.856953] hub 4-0:1.0: USB hub found [ 4.864535] hub 4-0:1.0: config failed, hub doesn't have any ports! (err -19) [ 4.870789] kmodloader: done loading kernel modules from /etc/modules-boot.d/* [ 4.885875] init: - preinit - [ 5.716696] mtdblock: MTD device 'devinfo' is NAND, please consider using UBI block devices instead. /bin/board_detect: /etc/board.d/#02_network#: line 92: syntax error: unexpected redirection (expecting ")") [ 6.691450] mtdblock: MTD device 'devinfo' is NAND, please consider using UBI block devices instead. [ 7.057688] ipqess-edma c080000.ethernet eth0: configuring for fixed/internal link mode [ 7.058493] device eth0 entered promiscuous mode [ 7.064691] qca8k-ipq4019 c000000.switch lan1: configuring for phy/psgmii link mode [ 7.070136] ipqess-edma c080000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx [ 8.118882] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready Press the [f] key and hit [enter] to enter failsafe mode Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level [ 10.350559] mount_root: loading kmods from internal overlay [ 10.366276] kmodloader: loading kernel modules from //etc/modules-boot.d/* [ 10.368058] kmodloader: done loading kernel modules from //etc/modules-boot.d/* [ 10.477985] mtdblock: MTD device 'rootfs' is NAND, please consider using UBI block devices instead. [ 10.557562] UBIFS (ubi0:1): default file-system created [ 10.558271] UBIFS (ubi0:1): Mounting in unauthenticated mode [ 10.561955] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 302 [ 10.642612] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "rootfs_data" [ 10.642682] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes [ 10.649543] UBIFS (ubi0:1): FS size: 62218240 bytes (59 MiB, 490 LEBs), max 500 LEBs, journal size 3174400 bytes (3 MiB, 25 LEBs) [ 10.659362] UBIFS (ubi0:1): reserved for root: 2938721 bytes (2869 KiB) [ 10.671031] UBIFS (ubi0:1): media format: w5/r0 (latest is w5/r0), UUID 94E5997B-38C3-47E6-9C95-429945F3EFB2, small LPT model [ 10.678377] block: attempting to load /tmp/ubifs_cfg/upper/etc/config/fstab [ 10.689170] block: unable to load configuration (fstab: Entry not found) [ 10.695886] block: attempting to load /tmp/ubifs_cfg/etc/config/fstab [ 10.702805] block: unable to load configuration (fstab: Entry not found) [ 10.709028] block: attempting to load /etc/config/fstab [ 10.717855] block: unable to load configuration (fstab: Entry not found) [ 10.720831] block: no usable configuration [ 10.730654] UBIFS (ubi0:1): un-mount UBI device 0 [ 10.731525] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" stops [ 10.741837] UBIFS (ubi0:1): Mounting in unauthenticated mode [ 10.742576] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 303 [ 10.818346] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "rootfs_data" [ 10.818472] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes [ 10.825286] UBIFS (ubi0:1): FS size: 62218240 bytes (59 MiB, 490 LEBs), max 500 LEBs, journal size 3174400 bytes (3 MiB, 25 LEBs) [ 10.835161] UBIFS (ubi0:1): reserved for root: 2938721 bytes (2869 KiB) [ 10.846801] UBIFS (ubi0:1): media format: w5/r0 (latest is w5/r0), UUID 94E5997B-38C3-47E6-9C95-429945F3EFB2, small LPT model [ 10.861367] mtdblock: MTD device 'rootfs' is NAND, please consider using UBI block devices instead. [ 10.910315] block: attempting to load /tmp/ubifs_cfg/upper/etc/config/fstab [ 10.910612] block: unable to load configuration (fstab: Entry not found) [ 10.916266] block: attempting to load /tmp/ubifs_cfg/etc/config/fstab [ 10.923384] block: unable to load configuration (fstab: Entry not found) [ 10.929579] block: attempting to load /etc/config/fstab [ 10.936328] block: unable to load configuration (fstab: Entry not found) [ 10.941255] block: no usable configuration [ 10.949715] mount_root: overlay filesystem has not been fully initialized yet [ 10.952522] mount_root: switching to ubifs overlay [ 10.966886] urandom-seed: Seed file not found (/etc/urandom.seed) [ 11.015238] device eth0 left promiscuous mode [ 11.032039] procd: - early - [ 11.032303] procd: - watchdog - [ 11.618738] procd: - watchdog - [ 11.620459] procd: - ubus - [ 11.800117] procd: - init - Please press Enter to activate this console. [ 12.447958] kmodloader: loading kernel modules from /etc/modules.d/* [ 12.458035] Loading modules backported from Linux version v6.1-rc8-0-g76dcd734eca2 [ 12.458089] Backport generated by backports.git v5.15.81-1-41-g02e352527db5 [ 12.459741] urngd: v1.0.2 started. [ 12.555848] ath10k 5.15 driver, optimized for CT firmware, probing pci device: 0x56. [ 12.556806] ath10k_pci 0000:01:00.0: enabling device (0140 -> 0142) [ 12.563366] ath10k_pci 0000:01:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0 [ 13.994392] ath10k_pci 0000:01:00.0: qca9888 hw2.0 target 0x01000000 chip_id 0x00000000 sub 0000:0000 [ 13.994462] ath10k_pci 0000:01:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 0 [ 14.006810] ath10k_pci 0000:01:00.0: firmware ver 10.4b-ct-9888-fW-13-5ae337bb1 api 5 features mfp,peer-flow-ctrl,txstatus-noack,wmi-10.x-CT,ratemask-CT,regdump-CT,txrate-CT,flush-all-CT,pingpong-CT,ch-regs-CT,nop-CT,set-special-CT,tx-rc-CT,cust-stats-CT,txrate2-CT,beacon-cb-CT,wmi-block-ack-CT,wmi-bcn-rc-CT crc32 59e741e7 [ 14.323245] ath10k_pci 0000:01:00.0: Loading BDF type 0 [ 14.350847] ath10k_pci 0000:01:00.0: board_file api 2 bmi_id 0:23 crc32 b050e9d6 [ 16.105061] ath10k_pci 0000:01:00.0: 10.4 wmi init: vdevs: 16 peers: 48 tid: 96 [ 16.105142] ath10k_pci 0000:01:00.0: msdu-desc: 2500 skid: 32 [ 16.159487] ath10k_pci 0000:01:00.0: wmi print 'P 48/48 V 16 K 144 PH 176 T 186 msdu-desc: 2500 sw-crypt: 0 ct-sta: 0' [ 16.160395] ath10k_pci 0000:01:00.0: wmi print 'free: 114572 iram: 12644 sram: 29508' [ 16.408033] ath10k_pci 0000:01:00.0: htt-ver 2.2 wmi-op 6 htt-op 4 cal pre-cal-file max-sta 32 raw 0 hwcrypto 1 [ 18.370609] ath10k_ahb a000000.wifi: qca4019 hw1.0 target 0x01000000 chip_id 0x003b00ff sub 0000:0000 [ 18.370680] ath10k_ahb a000000.wifi: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 0 [ 18.382484] ath10k_ahb a000000.wifi: firmware ver 10.4b-ct-4019-fW-13-5ae337bb1 api 5 features mfp,peer-flow-ctrl,txstatus-noack,wmi-10.x-CT,ratemask-CT,regdump-CT,txrate-CT,flush-all-CT,pingpong-CT,ch-regs-CT,nop-CT,set-special-CT,tx-rc-CT,cust-stats-CT,txrate2-CT,beacon-cb-CT,wmi-block-ack-CT,wmi-bcn-rc-CT crc32 6b2b5c5b [ 18.434264] ath10k_ahb a000000.wifi: Loading BDF type 0 [ 18.462540] ath10k_ahb a000000.wifi: board_file api 2 bmi_id 0:20 crc32 8fda7e22 [ 19.749936] ath10k_ahb a000000.wifi: 10.4 wmi init: vdevs: 16 peers: 48 tid: 96 [ 19.750012] ath10k_ahb a000000.wifi: msdu-desc: 2500 skid: 32 [ 19.796571] ath10k_ahb a000000.wifi: wmi print 'P 48/48 V 16 K 144 PH 176 T 186 msdu-desc: 2500 sw-crypt: 0 ct-sta: 0' [ 19.798200] ath10k_ahb a000000.wifi: wmi print 'free: 53252 iram: 13432 sram: 35752' [ 19.936746] ath10k_ahb a000000.wifi: htt-ver 2.2 wmi-op 6 htt-op 4 cal pre-cal-file max-sta 32 raw 0 hwcrypto 1 [ 21.286134] ath10k_ahb a800000.wifi: qca4019 hw1.0 target 0x01000000 chip_id 0x003b00ff sub 0000:0000 [ 21.286230] ath10k_ahb a800000.wifi: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 0 [ 21.299583] ath10k_ahb a800000.wifi: firmware ver 10.4b-ct-4019-fW-13-5ae337bb1 api 5 features mfp,peer-flow-ctrl,txstatus-noack,wmi-10.x-CT,ratemask-CT,regdump-CT,txrate-CT,flush-all-CT,pingpong-CT,ch-regs-CT,nop-CT,set-special-CT,tx-rc-CT,cust-stats-CT,txrate2-CT,beacon-cb-CT,wmi-block-ack-CT,wmi-bcn-rc-CT crc32 6b2b5c5b [ 21.349792] ath10k_ahb a800000.wifi: Loading BDF type 0 [ 21.350530] ath10k_ahb a800000.wifi: board_file api 2 bmi_id 0:21 crc32 8fda7e22 [ 22.641580] ath10k_ahb a800000.wifi: 10.4 wmi init: vdevs: 16 peers: 48 tid: 96 [ 22.641649] ath10k_ahb a800000.wifi: msdu-desc: 2500 skid: 32 [ 22.688857] ath10k_ahb a800000.wifi: wmi print 'P 48/48 V 16 K 144 PH 176 T 186 msdu-desc: 2500 sw-crypt: 0 ct-sta: 0' [ 22.690554] ath10k_ahb a800000.wifi: wmi print 'free: 53252 iram: 13432 sram: 35752' [ 22.827766] ath10k_ahb a800000.wifi: htt-ver 2.2 wmi-op 6 htt-op 4 cal pre-cal-file max-sta 32 raw 0 hwcrypto 1 [ 23.011679] batman_adv: B.A.T.M.A.N. advanced 2022.3-openwrt-1 (compatibility version 15) loaded [ 23.024183] usbcore: registered new interface driver ath9k_htc [ 23.024675] kmodloader: done loading kernel modules from /etc/modules.d/* [ 23.273221] mtdblock: MTD device 'devinfo' is NAND, please consider using UBI block devices instead. [ 29.001495] mtdblock: MTD device 'rootfs' is NAND, please consider using UBI block devices instead. [ 32.607006] ipqess-edma c080000.ethernet eth0: Link is Down [ 32.611649] ipqess-edma c080000.ethernet eth0: configuring for fixed/internal link mode [ 32.611904] ipqess-edma c080000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx [ 32.619452] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 32.630502] device eth0 entered promiscuous mode [ 32.634034] qca8k-ipq4019 c000000.switch lan1: configuring for phy/psgmii link mode [ 32.641202] br-lan: port 1(lan1) entered blocking state [ 32.646247] br-lan: port 1(lan1) entered disabled state [ 32.651962] device lan1 entered promiscuous mode [ 32.666643] qca8k-ipq4019 c000000.switch lan2: configuring for phy/psgmii link mode [ 32.668790] br-lan: port 2(lan2) entered blocking state [ 32.673228] br-lan: port 2(lan2) entered disabled state [ 32.678798] device lan2 entered promiscuous mode [ 32.686992] qca8k-ipq4019 c000000.switch lan3: configuring for phy/psgmii link mode [ 32.690685] br-lan: port 3(lan3) entered blocking state [ 32.695799] br-lan: port 3(lan3) entered disabled state [ 32.701584] device lan3 entered promiscuous mode [ 32.709678] qca8k-ipq4019 c000000.switch lan4: configuring for phy/psgmii link mode [ 32.713211] br-lan: port 4(lan4) entered blocking state [ 32.718456] br-lan: port 4(lan4) entered disabled state [ 32.724316] device lan4 entered promiscuous mode [ 32.737414] qca8k-ipq4019 c000000.switch wan: configuring for phy/psgmii link mode [ 36.821633] qca8k-ipq4019 c000000.switch lan1: Link is Up - 1Gbps/Full - flow control rx/tx [ 36.821761] br-lan: port 1(lan1) entered blocking state [ 36.828846] br-lan: port 1(lan1) entered forwarding state [ 36.836123] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready crond[1981]: crond (busybox 1.35.0) started, log level 5 BusyBox v1.35.0 (2023-01-02 06:46:27 UTC) built-in shell (ash) _______ ________ __ | |.-----.-----.-----.| | | |.----.| |_ | - || _ | -__| || | | || _|| _| |_______|| __|_____|__|__||________||__| |____| |__| W I R E L E S S F R E E D O M ----------------------------------------------------- OpenWrt-2023-01-02_1321-0800-ipq40xx-generic OpenWrt SNAPSHOT, r21655+2-c9a7c00f80 ----------------------------------------------------- === WARNING! ===================================== There is no root password defined on this device! Use the "passwd" command to set up a new password in order to prevent unauthorized SSH logins. -------------------------------------------------- root@OpenWrt:/# ``` ### Actual behaviour The configuration is not preserved ### Expected behaviour The configuration would be preserved from the previous firmware version ### Additional info _No response_ ### Diffconfig ```text jeff@deb-devel:~/devel/openwrt-ea8300-dsa-devel$ ./scripts/diffconfig.sh CONFIG_TARGET_ipq40xx=y CONFIG_TARGET_ipq40xx_generic=y CONFIG_TARGET_ipq40xx_generic_DEVICE_linksys_ea8300=y CONFIG_DEVEL=y CONFIG_BUSYBOX_CUSTOM=y CONFIG_BATMAN_ADV_BATMAN_V=y CONFIG_BATMAN_ADV_BLA=y CONFIG_BATMAN_ADV_DAT=y CONFIG_BATMAN_ADV_MCAST=y CONFIG_BUILD_LOG=y CONFIG_BUSYBOX_CONFIG_FEATURE_EDITING_SAVEHISTORY=y CONFIG_BUSYBOX_CONFIG_FEATURE_EDITING_SAVE_ON_EXIT=y CONFIG_BUSYBOX_CONFIG_FEATURE_REVERSE_SEARCH=y CONFIG_CCACHE=y CONFIG_DOWNLOAD_FOLDER="/home/jeff/devel/openwrt_dl" CONFIG_LIBCURL_COOKIES=y CONFIG_LIBCURL_FILE=y CONFIG_LIBCURL_FTP=y CONFIG_LIBCURL_HTTP=y CONFIG_LIBCURL_NGHTTP2=y CONFIG_LIBCURL_NO_SMB="!" CONFIG_LIBCURL_PROXY=y CONFIG_LIBCURL_WOLFSSL=y CONFIG_LUA_ECO_DEFAULT_OPENSSL=y CONFIG_LUA_ECO_OPENSSL=y # CONFIG_LUA_ECO_WOLFSSL is not set # CONFIG_LUCI_CSSTIDY is not set # CONFIG_LUCI_JSMIN is not set CONFIG_NGINX_HEADERS_MORE=y CONFIG_NGINX_HTTP_ACCESS=y CONFIG_NGINX_HTTP_AUTH_BASIC=y CONFIG_NGINX_HTTP_AUTOINDEX=y CONFIG_NGINX_HTTP_BROWSER=y CONFIG_NGINX_HTTP_CACHE=y CONFIG_NGINX_HTTP_CHARSET=y CONFIG_NGINX_HTTP_EMPTY_GIF=y CONFIG_NGINX_HTTP_FASTCGI=y CONFIG_NGINX_HTTP_GEO=y CONFIG_NGINX_HTTP_GZIP=y CONFIG_NGINX_HTTP_GZIP_STATIC=y CONFIG_NGINX_HTTP_LIMIT_CONN=y CONFIG_NGINX_HTTP_LIMIT_REQ=y CONFIG_NGINX_HTTP_MAP=y CONFIG_NGINX_HTTP_MEMCACHED=y CONFIG_NGINX_HTTP_PROXY=y CONFIG_NGINX_HTTP_REFERER=y CONFIG_NGINX_HTTP_REWRITE=y CONFIG_NGINX_HTTP_SCGI=y CONFIG_NGINX_HTTP_SPLIT_CLIENTS=y CONFIG_NGINX_HTTP_SSI=y CONFIG_NGINX_HTTP_UPSTREAM_HASH=y CONFIG_NGINX_HTTP_UPSTREAM_IP_HASH=y CONFIG_NGINX_HTTP_UPSTREAM_KEEPALIVE=y CONFIG_NGINX_HTTP_UPSTREAM_LEAST_CONN=y CONFIG_NGINX_HTTP_USERID=y CONFIG_NGINX_HTTP_UWSGI=y CONFIG_NGINX_HTTP_V2=y CONFIG_NGINX_NAXSI=y CONFIG_NGINX_PCRE=y CONFIG_NGINX_UBUS=y CONFIG_OPENSSH_LIBFIDO2=y CONFIG_OPENSSL_ENGINE=y CONFIG_OPENSSL_PREFER_CHACHA_OVER_GCM=y CONFIG_OPENSSL_WITH_ASM=y CONFIG_OPENSSL_WITH_CHACHA_POLY1305=y CONFIG_OPENSSL_WITH_CMS=y CONFIG_OPENSSL_WITH_DEPRECATED=y CONFIG_OPENSSL_WITH_ERROR_MESSAGES=y CONFIG_OPENSSL_WITH_PSK=y CONFIG_OPENSSL_WITH_SRP=y CONFIG_OPENSSL_WITH_TLS13=y CONFIG_PACKAGE_ath9k-htc-firmware=y CONFIG_PACKAGE_batctl-default=y CONFIG_PACKAGE_block-mount=y CONFIG_PACKAGE_build-details=y CONFIG_PACKAGE_cJSON=y CONFIG_PACKAGE_cgi-io=y CONFIG_PACKAGE_diffutils=y # CONFIG_PACKAGE_dnsmasq is not set # CONFIG_PACKAGE_dropbear is not set CONFIG_PACKAGE_findutils-find=y CONFIG_PACKAGE_git=y CONFIG_PACKAGE_glib2=y CONFIG_PACKAGE_htop=y CONFIG_PACKAGE_iftop=y CONFIG_PACKAGE_ip-bridge=y CONFIG_PACKAGE_ip-full=y # CONFIG_PACKAGE_iw is not set CONFIG_PACKAGE_iw-full=y CONFIG_PACKAGE_kmod-ath9k-common=y CONFIG_PACKAGE_kmod-ath9k-htc=y CONFIG_PACKAGE_kmod-batman-adv=y CONFIG_PACKAGE_kmod-fs-ext4=y # CONFIG_PACKAGE_kmod-lib-crc-ccitt is not set CONFIG_PACKAGE_kmod-lib-crc16=y CONFIG_PACKAGE_kmod-nf-nat6=y # CONFIG_PACKAGE_kmod-ppp is not set CONFIG_PACKAGE_kmod-random-core=y CONFIG_PACKAGE_less=y CONFIG_PACKAGE_libacl=y CONFIG_PACKAGE_libattr=y CONFIG_PACKAGE_libbpf=y CONFIG_PACKAGE_libcap=y CONFIG_PACKAGE_libcares=y CONFIG_PACKAGE_libcbor=y CONFIG_PACKAGE_libcurl=y CONFIG_PACKAGE_libdbi=y CONFIG_PACKAGE_libelf=y CONFIG_PACKAGE_libevdev=y CONFIG_PACKAGE_libffi=y CONFIG_PACKAGE_libfido2=y CONFIG_PACKAGE_libiwinfo-lua=y CONFIG_PACKAGE_liblua=y CONFIG_PACKAGE_liblucihttp=y CONFIG_PACKAGE_liblucihttp-lua=y CONFIG_PACKAGE_liblucihttp-ucode=y CONFIG_PACKAGE_liblzma=y CONFIG_PACKAGE_libmosquitto-ssl=y CONFIG_PACKAGE_libncurses=y CONFIG_PACKAGE_libnghttp2=y CONFIG_PACKAGE_libopenssl=y CONFIG_PACKAGE_libopenssl-conf=y CONFIG_PACKAGE_libpcap=y CONFIG_PACKAGE_libpcre=y CONFIG_PACKAGE_libpcre2=y CONFIG_PACKAGE_libpopt=y CONFIG_PACKAGE_librt=y CONFIG_PACKAGE_libstdcpp=y CONFIG_PACKAGE_libtirpc=y CONFIG_PACKAGE_libubus-lua=y CONFIG_PACKAGE_libudev-zero=y CONFIG_PACKAGE_libuuid=y # CONFIG_PACKAGE_logd is not set CONFIG_PACKAGE_logrotate=y CONFIG_PACKAGE_lsof=y CONFIG_PACKAGE_lua=y CONFIG_PACKAGE_luci-app-firewall=y CONFIG_PACKAGE_luci-app-opkg=y CONFIG_PACKAGE_luci-base=y CONFIG_PACKAGE_luci-lib-base=y CONFIG_PACKAGE_luci-lib-ip=y CONFIG_PACKAGE_luci-lib-jsonc=y CONFIG_PACKAGE_luci-lib-nixio=y CONFIG_PACKAGE_luci-lua-runtime=y CONFIG_PACKAGE_luci-mod-admin-full=y CONFIG_PACKAGE_luci-mod-dashboard=y CONFIG_PACKAGE_luci-mod-network=y CONFIG_PACKAGE_luci-mod-status=y CONFIG_PACKAGE_luci-mod-system=y CONFIG_PACKAGE_luci-proto-batman-adv=y CONFIG_PACKAGE_luci-proto-ipv6=y CONFIG_PACKAGE_luci-proto-ppp=y CONFIG_PACKAGE_luci-ssl-nginx=y CONFIG_PACKAGE_luci-theme-bootstrap=y CONFIG_PACKAGE_luci-theme-openwrt-2020=y CONFIG_PACKAGE_mosquitto-client-ssl=y CONFIG_PACKAGE_nand-utils=y CONFIG_PACKAGE_nano-full=y CONFIG_PACKAGE_nginx=y CONFIG_PACKAGE_nginx-mod-luci=y CONFIG_PACKAGE_nginx-mod-luci-ssl=y CONFIG_PACKAGE_nginx-ssl=y CONFIG_PACKAGE_nginx-ssl-util=y CONFIG_PACKAGE_nginx-util=y # CONFIG_PACKAGE_odhcp6c is not set # CONFIG_PACKAGE_odhcpd-ipv6only is not set CONFIG_PACKAGE_openssh-client=y CONFIG_PACKAGE_openssh-keygen=y CONFIG_PACKAGE_openssh-server=y CONFIG_PACKAGE_openssl-util=y # CONFIG_PACKAGE_ppp is not set CONFIG_PACKAGE_procps-ng=y CONFIG_PACKAGE_procps-ng-free=y CONFIG_PACKAGE_procps-ng-kill=y CONFIG_PACKAGE_procps-ng-pgrep=y CONFIG_PACKAGE_procps-ng-pkill=y CONFIG_PACKAGE_procps-ng-pmap=y CONFIG_PACKAGE_procps-ng-ps=y CONFIG_PACKAGE_procps-ng-pwdx=y CONFIG_PACKAGE_procps-ng-skill=y CONFIG_PACKAGE_procps-ng-slabtop=y CONFIG_PACKAGE_procps-ng-snice=y CONFIG_PACKAGE_procps-ng-tload=y CONFIG_PACKAGE_procps-ng-top=y CONFIG_PACKAGE_procps-ng-uptime=y CONFIG_PACKAGE_procps-ng-vmstat=y CONFIG_PACKAGE_procps-ng-w=y CONFIG_PACKAGE_procps-ng-watch=y CONFIG_PACKAGE_rpcd=y CONFIG_PACKAGE_rpcd-mod-file=y CONFIG_PACKAGE_rpcd-mod-iwinfo=y CONFIG_PACKAGE_rpcd-mod-luci=y CONFIG_PACKAGE_rpcd-mod-rrdns=y CONFIG_PACKAGE_rpcd-mod-ucode=y CONFIG_PACKAGE_rsync=y CONFIG_PACKAGE_socat=y CONFIG_PACKAGE_sudo=y CONFIG_PACKAGE_syslog-ng=y CONFIG_PACKAGE_tcpdump-mini=y CONFIG_PACKAGE_terminfo=y CONFIG_PACKAGE_ucode-mod-html=y CONFIG_PACKAGE_ucode-mod-lua=y CONFIG_PACKAGE_ucode-mod-math=y CONFIG_PACKAGE_uwsgi=y CONFIG_PACKAGE_uwsgi-cgi-plugin=y CONFIG_PACKAGE_uwsgi-luci-support=y CONFIG_PACKAGE_uwsgi-syslog-plugin=y CONFIG_PACKAGE_wpad-basic-wolfssl=m CONFIG_PACKAGE_wpad-mesh-openssl=y CONFIG_PACKAGE_xz=y CONFIG_PACKAGE_xz-utils=y CONFIG_PACKAGE_zlib=y CONFIG_PCRE2_JIT_ENABLED=y CONFIG_PCRE_JIT_ENABLED=y CONFIG_RSYNC_acl=y CONFIG_RSYNC_xattr=y # CONFIG_WOLFSSL_HAS_OPENVPN is not set ``` ``` ### Terms - [X] I am reporting an issue for OpenWrt, not an unsupported fork.

github.com/openwrt/openwrt

ipq40xx: Fix Linksys upgrade, restore config step

openwrt:master ← jeffsf:pr-2023-01-04-ipq40xx-sysupgrade

opened 05:43PM - 04 Jan 23 UTC

jeffsf

+6 -1

It appears that the refactor of the upgrade process for NAND devices resulted in… the nand_do_upgrade_success step not being called for devices using the linksys.sh script. As a result, configuration was not preserved over sysupgrade steps. This was restored for some devices in commit 84ff6c9. This commit restores preservation of config for ipq40xx devices using the linksys.sh script. Other devices and targets have not been examined. Closes: #11677 Fixes: e25e6d8e54 ("base-files: fix and clean up nand sysupgrade code") Tested-on: EA8300 Signed-off-by: Jeff Kletsky <git-commits@allycomm.com>

EDIT:
Regarding (the non-related) UBI NAND messages, I found the old message from bmork that he sent to kernel.org mailing list about those NAND warnings after the issue had risen here in the OpenWrt, but I can't find the original old local discussion.

https://lore.kernel.org/all/20220328161108.87757-1-bjorn@mork.no/T/

EDIT2:
Surprisingly, the discussion was newer, and in the LuCI repo...

https://github.com/openwrt/luci/issues/6092