Full-featured custom build for Dynalink DL-WRX36 (AX3600)

[hnyman]

@DarkGhostHunter

logs with this line:

Fri Dec  8 13:37:28 2023 kern.warn kernel: [   10.105851] mtdblock: MTD device 'rootfs' is NAND, please consider using UBI block devices instead.

Dunno what means.

Old stuff, normal.

Wrt32x / snapshot sysupgrade - config not saved

That is normal. It came with kernel 5.15, if I remember right. Upstream Linux started to "helpfully" warn about non-UBI FS on NAND flash (also for wifi calibration etc. read-only partitions) But you might be interested in EDIT: Regarding (the non-related) UBI NAND messages, I found the old message from bmork that he sent to kernel.org mailing list about those NAND warnings after the issue had risen here in the OpenWrt, but I can't find the original old local discussion. https://lore.…

@DarkGhostHunter

lines with this:

Fri Dec  8 13:38:40 2023 daemon.warn /usr/sbin/irqbalance: Cannot change IRQ 34 affinity: Invalid argument

Current irqbalance is more verbose about certain internal errors than earlier versions. 1.9.3-2 fixed most of the spam.

Irqbalance throwing errors on some routers after latest build following git pull

Seems that the error is not actually about the meson side (although also that might need attention, as we are still using your meson 1.9.0 build file, instead of the 1.9.3) The error is due to thinking some errors as transient and not disabling them at the (first) failure. We are specifically in some 23.05 device suffering from EINVAL error. this is from my R7800, log and strace for one interrupt (48): Sat Dec 9 10:17:27 2023 daemon.warn irqbalance: Cannot change IRQ 53 affinity: Invalid a…