continued:
[ 3.080101] pnp: PnP ACPI init
[ 3.082505] system 00:00: [io 0x0680-0x069f] has been reserved
[ 3.089137] system 00:00: [io 0x0400-0x047f] has been reserved
[ 3.095769] system 00:00: [io 0x0500-0x05fe] has been reserved
[ 3.102407] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 3.102605] pnp 00:01: Plug and Play ACPI device, IDs PNP0501 (active)
[ 3.106144] system 00:02: [mem 0x80a34000-0x80a34fff] has been reserved
[ 3.113554] system 00:02: [mem 0x80a32000-0x80a32fff] has been reserved
[ 3.120951] system 00:02: [mem 0x80a30000-0x80a30fff] has been reserved
[ 3.128353] system 00:02: [mem 0x80a1f000-0x80a1ffff] has been reserved
[ 3.135755] system 00:02: [mem 0x80a1d000-0x80a1dfff] has been reserved
[ 3.143157] system 00:02: [mem 0x80a2e000-0x80a2efff] has been reserved
[ 3.150553] system 00:02: [mem 0x80a2c000-0x80a2cfff] has been reserved
[ 3.157951] system 00:02: [mem 0x80a2a000-0x80a2afff] has been reserved
[ 3.165354] system 00:02: [mem 0x80a28000-0x80a28fff] has been reserved
[ 3.172756] system 00:02: [mem 0x80a26000-0x80a26fff] has been reserved
[ 3.180152] system 00:02: [mem 0x80a24000-0x80a24fff] has been reserved
[ 3.187553] system 00:02: [mem 0x80a22000-0x80a22fff] has been reserved
[ 3.194954] system 00:02: [mem 0x80a20000-0x80a20fff] has been reserved
[ 3.202366] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 3.202584] system 00:03: [mem 0xe0000000-0xefffffff] could not be reserved
[ 3.210373] system 00:03: [mem 0xfea00000-0xfeafffff] has been reserved
[ 3.217782] system 00:03: [mem 0xfed01000-0xfed01fff] has been reserved
[ 3.225185] system 00:03: [mem 0xfed03000-0xfed03fff] has been reserved
[ 3.232587] system 00:03: [mem 0xfed06000-0xfed06fff] has been reserved
[ 3.239983] system 00:03: [mem 0xfed08000-0xfed09fff] has been reserved
[ 3.247384] system 00:03: [mem 0xfed80000-0xfedbffff] could not be reserved
[ 3.255175] system 00:03: [mem 0xfed1c000-0xfed1cfff] has been reserved
[ 3.262577] system 00:03: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 3.270376] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 3.270683] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 3.271078] pnp 00:05: Plug and Play ACPI device, IDs PNP0c31 (active)
[ 3.271104] pnp: PnP ACPI: found 6 devices
[ 3.282306] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 3.292327] NET: Registered protocol family 2
[ 3.297384] IP idents hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 3.306546] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes, linear)
[ 3.316114] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 3.325036] TCP bind hash table entries: 16384 (order: 6, 262144 bytes, linear)
[ 3.333319] TCP: Hash tables configured (established 16384 bind 16384)
[ 3.340711] UDP hash table entries: 1024 (order: 3, 32768 bytes, linear)
[ 3.348237] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes, linear)
[ 3.356344] NET: Registered protocol family 1
[ 3.361237] pci 0000:01:00.0: can't claim BAR 6 [mem 0xfff00000-0xffffffff pref]: no compatible bridge window
[ 3.372334] pci 0000:02:00.0: can't claim BAR 6 [mem 0xfff00000-0xffffffff pref]: no compatible bridge window
[ 3.383430] pci 0000:03:00.0: can't claim BAR 6 [mem 0xfff00000-0xffffffff pref]: no compatible bridge window
[ 3.394531] pci 0000:04:00.0: can't claim BAR 6 [mem 0xfff00000-0xffffffff pref]: no compatible bridge window
[ 3.405650] pci 0000:01:00.0: BAR 6: no space for [mem size 0x00100000 pref]
[ 3.413544] pci 0000:01:00.0: BAR 6: failed to assign [mem size 0x00100000 pref]
[ 3.421817] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 3.427376] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff]
[ 3.434201] pci 0000:00:1c.0: bridge window [mem 0x80600000-0x807fffff]
[ 3.441802] pci 0000:02:00.0: BAR 6: no space for [mem size 0x00100000 pref]
[ 3.449690] pci 0000:02:00.0: BAR 6: failed to assign [mem size 0x00100000 pref]
[ 3.457972] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 3.463530] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff]
[ 3.470347] pci 0000:00:1c.1: bridge window [mem 0x80400000-0x805fffff]
[ 3.477953] pci 0000:03:00.0: BAR 6: no space for [mem size 0x00100000 pref]
[ 3.485841] pci 0000:03:00.0: BAR 6: failed to assign [mem size 0x00100000 pref]
[ 3.494119] pci 0000:00:1c.2: PCI bridge to [bus 03]
[ 3.499671] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff]
[ 3.506493] pci 0000:00:1c.2: bridge window [mem 0x80200000-0x803fffff]
[ 3.514097] pci 0000:04:00.0: BAR 6: no space for [mem size 0x00100000 pref]
[ 3.521979] pci 0000:04:00.0: BAR 6: failed to assign [mem size 0x00100000 pref]
[ 3.530258] pci 0000:00:1c.3: PCI bridge to [bus 04]
[ 3.535816] pci 0000:00:1c.3: bridge window [io 0x1000-0x1fff]
[ 3.542639] pci 0000:00:1c.3: bridge window [mem 0x80000000-0x801fffff]
[ 3.550231] pci_bus 0000:00: resource 4 [io 0x0070-0x0077]
[ 3.556467] pci_bus 0000:00: resource 5 [io 0x0000-0x006f window]
[ 3.563381] pci_bus 0000:00: resource 6 [io 0x0078-0x0cf7 window]
[ 3.570290] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window]
[ 3.577209] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
[ 3.584904] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
[ 3.592598] pci_bus 0000:00: resource 10 [mem 0x000e0000-0x000fffff window]
[ 3.600382] pci_bus 0000:00: resource 11 [mem 0x80000000-0xdfffffff window]
[ 3.608172] pci_bus 0000:01: resource 0 [io 0x4000-0x4fff]
[ 3.614407] pci_bus 0000:01: resource 1 [mem 0x80600000-0x807fffff]
[ 3.621416] pci_bus 0000:02: resource 0 [io 0x3000-0x3fff]
[ 3.627641] pci_bus 0000:02: resource 1 [mem 0x80400000-0x805fffff]
[ 3.634658] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
[ 3.640888] pci_bus 0000:03: resource 1 [mem 0x80200000-0x803fffff]
[ 3.647900] pci_bus 0000:04: resource 0 [io 0x1000-0x1fff]
[ 3.654135] pci_bus 0000:04: resource 1 [mem 0x80000000-0x801fffff]
[ 3.663185] PCI: CLS 64 bytes, default 64
[ 3.667956] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x171024fa93b, max_idle_ns: 440795253189 ns
[ 3.679184] clocksource: Switched to clocksource tsc
[ 3.686932] workingset: timestamp_bits=46 max_order=19 bucket_order=0
[ 3.696247] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 3.703153] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[ 3.713273] hv_vmbus: registering driver hyperv_fb
[ 3.718675] intel_idle: MWAIT substates: 0x33000020
[ 3.718678] intel_idle: v0.5.1 model 0x4C
[ 3.719378] intel_idle: Local APIC timer is reliable in all C-states
[ 3.719760] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:01/input/input0
[ 3.729280] ACPI: Power Button [PWR2]
[ 3.733495] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[ 3.742910] ACPI: Sleep Button [SLPB]
[ 3.747111] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 3.755726] ACPI: Power Button [PWRF]
[ 3.765748] thermal LNXTHERM:00: registered as thermal_zone0
[ 3.772088] ACPI: Thermal Zone [TZ01] (27 C)
[ 3.777162] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
[ 3.804791] 00:01: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 3.814404] Non-volatile memory driver v1.3
[ 3.819234] Linux agpgart interface v0.103
[ 3.827186] loop: module loaded
[ 3.830788] Guest personality initialized and is inactive
[ 3.836897] VMCI host device registered (name=vmci, major=10, minor=63)
[ 3.844312] Initialized host personality
[ 3.848995] Loading iSCSI transport class v2.0-870.
[ 3.855469] VMware PVSCSI driver - version 1.0.7.0-k
[ 3.861080] hv_vmbus: registering driver hv_storvsc
[ 3.867715] ahci 0000:00:13.0: version 3.0
[ 3.868138] ahci 0000:00:13.0: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[ 3.877228] ahci 0000:00:13.0: flags: 64bit ncq led clo only pio slum part deso sadm sds apst
[ 3.887618] scsi host0: ahci
[ 3.891464] scsi host1: ahci
[ 3.894861] ata1: SATA max UDMA/133 abar m2048@0x80a2f000 port 0x80a2f100 irq 119
[ 3.903256] ata2: SATA max UDMA/133 abar m2048@0x80a2f000 port 0x80a2f180 irq 119
[ 3.911996] VMware vmxnet3 virtual NIC driver - version 1.5.0.0-k-NAPI
[ 3.919344] hv_vmbus: registering driver hv_netvsc
[ 3.924710] Fusion MPT base driver 3.04.20
[ 3.929280] Copyright (c) 1999-2008 LSI Corporation
[ 3.934749] Fusion MPT SPI Host driver 3.04.20
[ 3.939751] Fusion MPT SAS Host driver 3.04.20
[ 3.944773] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.952076] ehci-pci: EHCI PCI platform driver
[ 3.957087] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 3.964022] ohci-pci: OHCI PCI platform driver
[ 3.969022] ohci-platform: OHCI generic platform driver
[ 3.974905] uhci_hcd: USB Universal Host Controller Interface driver
[ 3.982404] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 3.988277] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 3.997730] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000081509810
[ 4.008044] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 4.017083] hub 1-0:1.0: USB hub found
[ 4.021435] hub 1-0:1.0: 7 ports detected
[ 4.028348] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 4.034218] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 4.042500] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[ 4.050965] hub 2-0:1.0: USB hub found
[ 4.055283] hub 2-0:1.0: 6 ports detected
[ 4.061654] usbcore: registered new interface driver usb-storage
[ 4.068486] i8042: PNP: No PS/2 controller found.
[ 4.073759] hv_vmbus: registering driver hyperv_keyboard
[ 4.079776] rtc_cmos 00:04: RTC can wake from S4
[ 4.085422] rtc_cmos 00:04: registered as rtc0
[ 4.090763] rtc_cmos 00:04: setting system clock to 2023-03-25T15:29:00 UTC (1679758140)
[ 4.099829] rtc_cmos 00:04: alarms up to one month, y3k, 242 bytes nvram
[ 4.109067] intel_pstate: Intel P-state driver initializing
[ 4.116035] sdhci: Secure Digital Host Controller Interface driver
[ 4.122998] sdhci: Copyright(c) Pierre Ossman
[ 4.128268] hid: raw HID events driver (C) Jiri Kosina
[ 4.129603] mmc0: SDHCI controller on ACPI [INT33BB:00] using ADMA
[ 4.134074] hv_vmbus: registering driver hid_hyperv
[ 4.146484] usbcore: registered new interface driver usbhid
[ 4.152716] usbhid: USB HID core driver
[ 4.154084] mmc1: SDHCI controller on ACPI [80860F14:00] using ADMA
[ 4.157152] hv_utils: Registering HyperV Utility Driver
[ 4.169876] hv_vmbus: registering driver hv_utils
[ 4.175137] hv_vmbus: registering driver hv_balloon
[ 4.181056] NET: Registered protocol family 10
[ 4.187518] Segment Routing with IPv6
[ 4.191924] NET: Registered protocol family 17
[ 4.197092] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[ 4.212280] 8021q: 802.1Q VLAN Support v1.8
[ 4.217020] NET: Registered protocol family 40
[ 4.223344] microcode: sig=0x406c4, pf=0x1, revision=0x40a
[ 4.229700] microcode: Microcode Update Driver: v2.2.
[ 4.229710] IPI shorthand broadcast: enabled
[ 4.240538] SSE version of gcm_enc/dec engaged.
[ 4.243026] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 4.251761] sched_clock: Marking stable (3323428850, 928139425)->(4421802988, -170234713)
[ 4.252849] ata2: SATA link down (SStatus 0 SControl 300)
[ 4.261996] registered taskstats version 1
[ 4.278567] ata1.00: NCQ Send/Recv Log not supported
[ 4.284226] ata1.00: ATA-10: InnoDisk Corp. - mSATA 3ME4, L17606, max UDMA/133
[ 4.292315] ata1.00: 31277232 sectors, multi 1: LBA48 NCQ (depth 32), AA
[ 19.372956] ata1.00: qc timeout (cmd 0x47)
[ 19.380206] ata1.00: READ LOG DMA EXT failed, trying PIO
[ 19.386240] ata1.00: NCQ Send/Recv Log not supported
[ 19.391838] ata1.00: configured for UDMA/133
[ 19.724974] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 19.742592] ata1.00: NCQ Send/Recv Log not supported
[ 19.764706] ata1.00: NCQ Send/Recv Log not supported
[ 19.770318] ata1.00: configured for UDMA/133
[ 19.775968] scsi 0:0:0:0: Direct-Access ATA InnoDisk Corp. - 06 PQ: 0 ANSI: 5
[ 19.787063] sd 0:0:0:0: [sda] 31277232 512-byte logical blocks: (16.0 GB/14.9 GiB)
[ 19.795757] sd 0:0:0:0: [sda] Write Protect is off
[ 19.801150] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 19.801549] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 19.819664] Alternate GPT is invalid, using primary GPT.
[ 19.825666] sda: sda1 sda2 sda128
[ 19.830818] sd 0:0:0:0: [sda] Attached SCSI disk
[ 20.901814] EXT4-fs (sda2): mounted filesystem without journal. Opts: (null)
[ 20.909766] VFS: Mounted root (ext4 filesystem) readonly on device 8:2.
[ 20.919043] Freeing unused kernel image (initmem) memory: 1460K
[ 20.983041] Write protecting the kernel read-only data: 20480k
[ 20.992938] Freeing unused kernel image (text/rodata gap) memory: 2044K
[ 21.002877] Freeing unused kernel image (rodata/data gap) memory: 2016K
[ 21.010839] Run /sbin/init as init process
[ 21.015438] with arguments:
[ 21.015442] /sbin/init
[ 21.015445] with environment:
[ 21.015447] HOME=/
[ 21.015450] TERM=linux
[ 21.015454] BOOT_IMAGE=/boot/vmlinuz
[ 21.050266] init: Console is alive
[ 21.129393] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[ 21.143173] pps_core: LinuxPPS API ver. 1 registered
[ 21.148737] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 21.163098] PTP clock support registered
[ 21.173367] Button Hotplug driver version 0.4.1
[ 21.183275] igb: Intel(R) Gigabit Ethernet Network Driver
[ 21.189329] igb: Copyright (c) 2007-2014 Intel Corporation.
[ 21.226719] pps pps0: new PPS source ptp0
[ 21.231293] igb 0000:01:00.0: added PHC on eth0
[ 21.236395] igb 0000:01:00.0: Intel(R) Gigabit Ethernet Network Connection
[ 21.244100] igb 0000:01:00.0: eth0: (PCIe:2.5Gb/s:Width x1) 00:90:7f:03:a5:30
[ 21.252147] igb 0000:01:00.0: eth0: PBA No: 000300-000
[ 21.257904] igb 0000:01:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)
[ 21.297562] pps pps1: new PPS source ptp1
[ 21.302136] igb 0000:02:00.0: added PHC on eth1
[ 21.307238] igb 0000:02:00.0: Intel(R) Gigabit Ethernet Network Connection
[ 21.314944] igb 0000:02:00.0: eth1: (PCIe:2.5Gb/s:Width x1) 00:90:7f:03:a5:31
[ 21.322998] igb 0000:02:00.0: eth1: PBA No: 000300-000
[ 21.328746] igb 0000:02:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)
[ 21.368354] pps pps2: new PPS source ptp2
[ 21.372935] igb 0000:03:00.0: added PHC on eth2
[ 21.378008] igb 0000:03:00.0: Intel(R) Gigabit Ethernet Network Connection
[ 21.385714] igb 0000:03:00.0: eth2: (PCIe:2.5Gb/s:Width x1) 00:90:7f:03:a5:32
[ 21.393773] igb 0000:03:00.0: eth2: PBA No: 000300-000
[ 21.399522] igb 0000:03:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)
[ 21.436127] pps pps3: new PPS source ptp3
[ 21.440710] igb 0000:04:00.0: added PHC on eth3
[ 21.445810] igb 0000:04:00.0: Intel(R) Gigabit Ethernet Network Connection
[ 21.453519] igb 0000:04:00.0: eth3: (PCIe:2.5Gb/s:Width x1) 00:a0:c9:00:00:00
[ 21.461569] igb 0000:04:00.0: eth3: PBA No: 000300-000
[ 21.467328] igb 0000:04:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)
[ 23.455410] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[ 23.469729] init: - preinit -
[ 23.604913] random: jshn: uninitialized urandom read (4 bytes read)
[ 23.642289] random: jshn: uninitialized urandom read (4 bytes read)
[ 23.659447] random: jshn: uninitialized urandom read (4 bytes read)
[ 23.754702] 8021q: adding VLAN 0 to HW filter on device eth0
[ 27.877973] mount_root: mounting /dev/root
[ 27.885371] EXT4-fs (sda2): re-mounted. Opts: (null)
[ 28.076355] urandom-seed: Seeding with /etc/urandom.seed
[ 28.141848] procd: - early -
[ 28.706577] procd: - ubus -
[ 28.718762] random: ubusd: uninitialized urandom read (4 bytes read)
[ 28.760555] random: ubusd: uninitialized urandom read (4 bytes read)
[ 28.767985] random: ubusd: uninitialized urandom read (4 bytes read)
[ 28.779810] procd: - init -
[ 28.914967] urngd: v1.0.2 started.
[ 28.933343] random: crng init done
[ 28.937157] random: 25 urandom warning(s) missed due to ratelimiting
[ 28.945878] kmodloader: loading kernel modules from /etc/modules.d/*
[ 28.971709] e1000: Intel(R) PRO/1000 Network Driver
[ 28.977222] e1000: Copyright (c) 1999-2006 Intel Corporation.
[ 28.988905] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver
[ 28.995780] ixgbe: Copyright (c) 1999-2016 Intel Corporation.
[ 29.005299] i2c /dev entries driver
[ 29.038867] e1000e: Intel(R) PRO/1000 Network Driver
[ 29.044507] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 29.055122] Intel(R) 2.5G Ethernet Linux Driver
[ 29.060198] Copyright(c) 2018 Intel Corporation.
[ 29.101671] PPP generic driver version 2.4.2
[ 29.107588] NET: Registered protocol family 24
[ 29.117389] kmodloader: done loading kernel modules from /etc/modules.d/*
[ 31.964130] 8021q: adding VLAN 0 to HW filter on device eth1
[ 31.970983] br-lan: port 1(eth1) entered blocking state
[ 31.976946] br-lan: port 1(eth1) entered disabled state
[ 31.982984] device eth1 entered promiscuous mode
[ 32.014128] 8021q: adding VLAN 0 to HW filter on device eth2
[ 32.020876] br-lan: port 2(eth2) entered blocking state
[ 32.026771] br-lan: port 2(eth2) entered disabled state
[ 32.032781] device eth2 entered promiscuous mode
[ 32.053883] 8021q: adding VLAN 0 to HW filter on device eth3
[ 32.060293] igb 0000:04:00.0 eth3: igb: eth3 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
[ 32.062967] br-lan: port 3(eth3) entered blocking state
[ 32.076609] br-lan: port 3(eth3) entered disabled state
[ 32.082796] device eth3 entered promiscuous mode
[ 32.091116] br-lan: port 3(eth3) entered blocking state
[ 32.096987] br-lan: port 3(eth3) entered forwarding state
[ 32.103383] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
[ 32.133511] 8021q: adding VLAN 0 to HW filter on device eth0
Original board before removal of R607:
