Watchguard T70 HW discovery

konus · March 25, 2023, 4:06pm

Another cheap x86 wired only router from ebay that I recently bought. Specs:

Celeron N3160 4 core CPU
2 GB soldered on RAM
16 GB msata boot drive
8 GB ethernet ports: 3 work out of the box, 5 port switch needs a hardware mod to get it to work
2 USB ports
spare internal sata + power port although there is no drive bracket / supports
fanless so completely silent

OpenWrt installation is straightforward: just write the OpenWrt image to the msata drive. I did this on a different machine, not sure if it could be done on the router itself.

The main issue with the device is that the 5 port switch does not work out of the box. This post on the netgate forum explains why.

https://forum.netgate.com/topic/151470/watchguard-firebox-t70

The easiest solution is to remove the heatsink from the switch chip such that there is access to the row of resistors. Carefully removing R607 with a soldering iron does make the switch work as a 'dumb' switch on eth3. This does have security implications that traffic can't be separated but does not really matter to my use case. More info about this can be found in the netgate forum post linked above.

dmesg output

root@OpenWrt:~# dmesg
[    0.000000] Linux version 5.10.161 (builder@buildhost) (x86_64-openwrt-linux-musl-gcc (OpenWrt GCC 11.2.0 r20028-43d71ad93e) 11.2.0, GNU ld (GNU Binutils) 2.37) #0 SMP Tue Jan 3 00:24:21 2023
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz root=PARTUUID=abeae232-5289-82a1-0e57-2f2fe899f402 rootwait console=tty0 console=ttyS0,115200n8 noinitrd
[    0.000000] x86/fpu: x87 FPU will use FXSAVE
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009cfff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009d000-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000752b0fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000752b1000-0x00000000752befff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000752bf000-0x000000007a4befff] usable
[    0.000000] BIOS-e820: [mem 0x000000007a4bf000-0x000000007aebefff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007aebf000-0x000000007bfbefff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000007bfbf000-0x000000007bffefff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000007bfff000-0x000000007bffffff] usable
[    0.000000] BIOS-e820: [mem 0x000000007e800000-0x000000007ebfffff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007ef00000-0x000000007fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000e3ffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fea00000-0x00000000feafffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed01000-0x00000000fed01fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed03000-0x00000000fed03fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed09fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1cfff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fedbffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.8 present.
[    0.000000] DMI: Insyde Braswell/T70, BIOS 1.16 05/12/2017
[    0.000000] tsc: Detected 1600.000 MHz processor
[    0.000687] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000695] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000715] last_pfn = 0x7c000 max_arch_pfn = 0x400000000
[    0.000722] MTRR default type: uncachable
[    0.000724] MTRR fixed ranges enabled:
[    0.000727]   00000-9FFFF write-back
[    0.000729]   A0000-BFFFF uncachable
[    0.000732]   C0000-FFFFF write-protect
[    0.000734] MTRR variable ranges enabled:
[    0.000737]   0 base 0FFC00000 mask FFFC00000 write-protect
[    0.000740]   1 base 000000000 mask F80000000 write-back
[    0.000743]   2 base 07F000000 mask FFF000000 uncachable
[    0.000745]   3 base 07E800000 mask FFF800000 uncachable
[    0.000747]   4 disabled
[    0.000749]   5 disabled
[    0.000750]   6 disabled
[    0.000752]   7 disabled
[    0.000936] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT
[    0.009381] ACPI: Early table checksum verification disabled
[    0.009393] ACPI: RSDP 0x00000000000FE020 000024 (v02 INSYDE)
[    0.009405] ACPI: XSDT 0x000000007BFFE120 00009C (v01 INSYDE INSYDE   00000003      01000013)
[    0.009420] ACPI: FACP 0x000000007BFF8000 00010C (v05 INSYDE INSYDE   00000003 ACPI 00040000)
[    0.009436] ACPI: DSDT 0x000000007BFE8000 00AC2E (v02 INSYDE INSYDE   00000003 ACPI 00040000)
[    0.009446] ACPI: FACS 0x000000007BFAA000 000040
[    0.009455] ACPI: TCPA 0x000000007BFFD000 000032 (v02 INSYDE INSYDE   00000000 ACPI 00040000)
[    0.009465] ACPI: UEFI 0x000000007BFFC000 000236 (v01 INSYDE INSYDE   00000001 ACPI 00040000)
[    0.009475] ACPI: UEFI 0x000000007BFFA000 000042 (v01 INSYDE INSYDE   00000000 ACPI 00040000)
[    0.009485] ACPI: SSDT 0x000000007BFF9000 0003A2 (v01 INSYDE TcgTable 00001000 ACPI 00040000)
[    0.009495] ACPI: APIC 0x000000007BFF7000 000084 (v03 INSYDE INSYDE   00000003 ACPI 00040000)
[    0.009505] ACPI: MCFG 0x000000007BFF6000 00003C (v01 INSYDE INSYDE   00000003 ACPI 00040000)
[    0.009515] ACPI: SLIC 0x000000007BFF5000 000176 (v01 INSYDE INSYDE   00000003 ACPI 00040000)
[    0.009525] ACPI: WDAT 0x000000007BFF4000 0001C4 (v01 INSYDE INSYDE   00000003 ACPI 00040000)
[    0.009535] ACPI: WDRT 0x000000007BFF3000 000047 (v01 INSYDE INSYDE   00000003 ACPI 00040000)
[    0.009545] ACPI: SSDT 0x000000007BFE7000 000763 (v01 INSYDE CpuPm    00003000 ACPI 00040000)
[    0.009555] ACPI: SSDT 0x000000007BFE6000 000290 (v01 INSYDE Cpu0Tst  00003000 ACPI 00040000)
[    0.009565] ACPI: SSDT 0x000000007BFE5000 00017A (v01 INSYDE ApTst    00003000 ACPI 00040000)
[    0.009575] ACPI: CSRT 0x000000007BFE4000 00014C (v00 INSYDE INSYDE   00000005 ACPI 00040000)
[    0.009585] ACPI: FPDT 0x000000007BFE3000 000044 (v01 INSYDE INSYDE   00000002 ACPI 00040000)
[    0.009595] ACPI: Reserving FACP table memory at [mem 0x7bff8000-0x7bff810b]
[    0.009600] ACPI: Reserving DSDT table memory at [mem 0x7bfe8000-0x7bff2c2d]
[    0.009603] ACPI: Reserving FACS table memory at [mem 0x7bfaa000-0x7bfaa03f]
[    0.009607] ACPI: Reserving TCPA table memory at [mem 0x7bffd000-0x7bffd031]
[    0.009611] ACPI: Reserving UEFI table memory at [mem 0x7bffc000-0x7bffc235]
[    0.009614] ACPI: Reserving UEFI table memory at [mem 0x7bffa000-0x7bffa041]
[    0.009618] ACPI: Reserving SSDT table memory at [mem 0x7bff9000-0x7bff93a1]
[    0.009621] ACPI: Reserving APIC table memory at [mem 0x7bff7000-0x7bff7083]
[    0.009625] ACPI: Reserving MCFG table memory at [mem 0x7bff6000-0x7bff603b]
[    0.009628] ACPI: Reserving SLIC table memory at [mem 0x7bff5000-0x7bff5175]
[    0.009632] ACPI: Reserving WDAT table memory at [mem 0x7bff4000-0x7bff41c3]
[    0.009636] ACPI: Reserving WDRT table memory at [mem 0x7bff3000-0x7bff3046]
[    0.009639] ACPI: Reserving SSDT table memory at [mem 0x7bfe7000-0x7bfe7762]
[    0.009643] ACPI: Reserving SSDT table memory at [mem 0x7bfe6000-0x7bfe628f]
[    0.009646] ACPI: Reserving SSDT table memory at [mem 0x7bfe5000-0x7bfe5179]
[    0.009650] ACPI: Reserving CSRT table memory at [mem 0x7bfe4000-0x7bfe414b]
[    0.009654] ACPI: Reserving FPDT table memory at [mem 0x7bfe3000-0x7bfe3043]
[    0.009674] ACPI: Local APIC address 0xfee00000
[    0.009711] Zone ranges:
[    0.009715]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.009720]   DMA32    [mem 0x0000000001000000-0x000000007bffffff]
[    0.009725]   Normal   empty
[    0.009729] Movable zone start for each node
[    0.009732] Early memory node ranges
[    0.009736]   node   0: [mem 0x0000000000001000-0x000000000009cfff]
[    0.009739]   node   0: [mem 0x0000000000100000-0x00000000752b0fff]
[    0.009743]   node   0: [mem 0x00000000752bf000-0x000000007a4befff]
[    0.009746]   node   0: [mem 0x000000007bfff000-0x000000007bffffff]
[    0.009751] Initmem setup node 0 [mem 0x0000000000001000-0x000000007bffffff]
[    0.009756] On node 0 totalpages: 500814
[    0.009758]   DMA zone: 64 pages used for memmap
[    0.009760]   DMA zone: 21 pages reserved
[    0.009763]   DMA zone: 3996 pages, LIFO batch:0
[    0.009766]   DMA32 zone: 7872 pages used for memmap
[    0.009768]   DMA32 zone: 496818 pages, LIFO batch:63
[    0.009776] On node 0, zone DMA: 1 pages in unavailable ranges
[    0.009873] On node 0, zone DMA: 99 pages in unavailable ranges
[    0.022362] On node 0, zone DMA32: 14 pages in unavailable ranges
[    0.022625] On node 0, zone DMA32: 6976 pages in unavailable ranges
[    0.023232] On node 0, zone DMA32: 16384 pages in unavailable ranges
[    0.023489] ACPI: PM-Timer IO Port: 0x408
[    0.023499] ACPI: Local APIC address 0xfee00000
[    0.023515] ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1])
[    0.023520] ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1])
[    0.023524] ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1])
[    0.023527] ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1])
[    0.023549] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-114
[    0.023556] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.023562] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.023566] ACPI: IRQ0 used by override.
[    0.023569] ACPI: IRQ9 used by override.
[    0.023573] Using ACPI (MADT) for SMP configuration information
[    0.023580] TSC deadline timer available
[    0.023585] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.023646] [mem 0x80000000-0xdfffffff] available for PCI devices
[    0.023650] Booting paravirtualized kernel on bare hardware
[    0.023659] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.023674] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[    0.024760] percpu: Embedded 48 pages/cpu s157016 r8192 d31400 u524288
[    0.024782] pcpu-alloc: s157016 r8192 d31400 u524288 alloc=1*2097152
[    0.024787] pcpu-alloc: [0] 0 1 2 3
[    0.024848] Built 1 zonelists, mobility grouping on.  Total pages: 492857
[    0.024856] Kernel command line: BOOT_IMAGE=/boot/vmlinuz root=PARTUUID=abeae232-5289-82a1-0e57-2f2fe899f402 rootwait console=tty0 console=ttyS0,115200n8 noinitrd
[    0.025782] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.026189] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.026270] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.043655] Memory: 1941656K/2003256K available (14338K kernel code, 1127K rwdata, 2080K rodata, 1460K init, 1396K bss, 61344K reserved, 0K cma-reserved)
[    0.043778] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.043796] Kernel/User page tables isolation: enabled
[    0.043946] rcu: Hierarchical RCU implementation.
[    0.043954] rcu:     RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
[    0.043958]  Tracing variant of Tasks RCU enabled.
[    0.043962] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.043966] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.043991] NR_IRQS: 33024, nr_irqs: 1024, preallocated irqs: 16
[    0.045240] Console: colour dummy device 80x25
[    0.045740] printk: console [tty0] enabled
[    0.944062] printk: console [ttyS0] enabled
[    0.948746] ACPI: Core revision 20200925
[    0.953363] APIC: Switch to symmetric I/O mode setup
[    0.960753] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x171024fa93b, max_idle_ns: 440795253189 ns
[    0.972527] Calibrating delay loop (skipped), value calculated using timer frequency.. 3200.00 BogoMIPS (lpj=16000000)
[    0.982525] pid_max: default: 32768 minimum: 301
[    0.982525] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    0.982525] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    0.982525] mce: CPU0: Thermal monitoring enabled (TM1)
[    0.982525] process: using mwait in idle threads
[    0.982525] Last level iTLB entries: 4KB 48, 2MB 0, 4MB 0
[    0.982525] Last level dTLB entries: 4KB 256, 2MB 16, 4MB 16, 1GB 0
[    0.982525] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.982525] Spectre V2 : Mitigation: Retpolines
[    0.982525] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.982525] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
[    0.982525] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
[    0.982525] MMIO Stale Data: Unknown: No mitigations
[    0.982525] Freeing SMP alternatives memory: 40K
[    0.982525] smpboot: CPU0: Intel(R) Celeron(R) CPU  N3160  @ 1.60GHz (family: 0x6, model: 0x4c, stepping: 0x4)
[    0.982935] Performance Events: PEBS fmt2+, 8-deep LBR, Silvermont events, 8-deep LBR, full-width counters, Intel PMU driver.
[    0.992533] ... version:                3
[    0.997012] ... bit width:              40
[    1.001586] ... generic registers:      2
[    1.002530] ... value mask:             000000ffffffffff
[    1.008467] ... max period:             0000007fffffffff
[    1.012529] ... fixed-purpose events:   3
[    1.017008] ... event mask:             0000000700000003
[    1.022797] rcu: Hierarchical SRCU implementation.
[    1.028279] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build
[    1.032711] smp: Bringing up secondary CPUs ...
[    1.038074] x86: Booting SMP configuration:
[    1.042536] .... node  #0, CPUs:      #1 #2 #3
[    1.043961] smp: Brought up 1 node, 4 CPUs
[    1.052538] smpboot: Max logical packages: 1
[    1.057312] smpboot: Total of 4 processors activated (12800.00 BogoMIPS)
[    1.063381] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    1.072546] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    1.080311] pinctrl core: initialized pinctrl subsystem
[    1.083235] NET: Registered protocol family 16
[    1.092527] thermal_sys: Registered thermal governor 'step_wise'
[    1.092527] thermal_sys: Registered thermal governor 'user_space'
[    1.101425] cpuidle: using governor ladder
[    1.112693] ACPI: bus type PCI registered
[    1.117176] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    1.124842] PCI: Using configuration type 1 for base access
[    1.131501] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    1.146629] cryptd: max_cpu_qlen set to 1000
[    1.152261] ACPI: Added _OSI(Module Device)
[    1.152535] ACPI: Added _OSI(Processor Device)
[    1.157501] ACPI: Added _OSI(3.0 _SCP Extensions)
[    1.162552] ACPI: Added _OSI(Processor Aggregator Device)
[    1.168580] ACPI: Added _OSI(Linux-Dell-Video)
[    1.172531] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    1.178470] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[    1.196113] ACPI: 5 ACPI AML tables successfully acquired and loaded
[    1.205979] ACPI: Dynamic OEM Table Load:
[    1.210478] ACPI: SSDT 0xFFFF888003932000 000654 (v01 PmRef  Cpu0Ist  00003000 INTL 20130117)
[    1.224257] ACPI: Dynamic OEM Table Load:
[    1.228751] ACPI: SSDT 0xFFFF888003BBD400 0003A5 (v01 PmRef  Cpu0Cst  00003001 INTL 20130117)
[    1.244391] ACPI: Dynamic OEM Table Load:
[    1.248882] ACPI: SSDT 0xFFFF888002F76200 00015F (v01 PmRef  ApIst    00003000 INTL 20130117)
[    1.253856] ACPI: Dynamic OEM Table Load:
[    1.258340] ACPI: SSDT 0xFFFF888002DC0A80 00008D (v01 PmRef  ApCst    00003000 INTL 20130117)
[    1.276197] ACPI: Interpreter enabled
[    1.280307] ACPI: (supports S0 S5)
[    1.282532] ACPI: Using IOAPIC for interrupt routing
[    1.288161] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    1.303422] ACPI: Enabled 7 GPEs in block 00 to 3F
[    1.311107] ACPI: Power Resource [USBC] (on)
[    1.320500] ACPI: Power Resource [CLK0] (on)
[    1.325776] ACPI: Power Resource [CLK0] (on)
[    1.327964] ACPI: Power Resource [CLK1] (on)
[    1.342657] ACPI: Power Resource [ID3C] (off)
[    1.353156] ACPI: Power Resource [FN00] (off)
[    1.358450] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    1.360599] acpi PNP0A08:00: _OSC: OS supports [Segments MSI HPX-Type3]
[    1.372666] acpi PNP0A08:00: _OSC failed (AE_ERROR)
[    1.378381] acpi PNP0A08:00: host bridge window expanded to [mem 0x80000000-0xdfffffff window]; [mem 0x80000000-0xdfffffff window] ignored
[    1.392831] PCI host bridge to bus 0000:00
[    1.397415] pci_bus 0000:00: root bus resource [io  0x0070-0x0077]
[    1.402533] pci_bus 0000:00: root bus resource [io  0x0000-0x006f window]
[    1.410122] pci_bus 0000:00: root bus resource [io  0x0078-0x0cf7 window]
[    1.422532] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    1.430123] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    1.432537] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[    1.440905] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000fffff window]
[    1.452532] pci_bus 0000:00: root bus resource [mem 0x80000000-0xdfffffff window]
[    1.460901] pci_bus 0000:00: root bus resource [bus 00-ff]
[    1.462554] pci 0000:00:00.0: [8086:2280] type 00 class 0x060000
[    1.472536] pci 0000:00:13.0: [8086:22a3] type 00 class 0x010601
[    1.482590] pci 0000:00:13.0: reg 0x20: [io  0x5020-0x503f]
[    1.488831] pci 0000:00:13.0: reg 0x24: [mem 0x80a2f000-0x80a2f7ff]
[    1.492604] pci 0000:00:13.0: PME# supported from D3hot
[    1.502527] pci 0000:00:14.0: [8086:22b5] type 00 class 0x0c0330
[    1.502561] pci 0000:00:14.0: reg 0x10: [mem 0x80a00000-0x80a0ffff 64bit]
[    1.510260] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    1.522800] pci 0000:00:1a.0: [8086:2298] type 00 class 0x108000
[    1.529537] pci 0000:00:1a.0: reg 0x10: [mem 0x80900000-0x809fffff]
[    1.532542] pci 0000:00:1a.0: reg 0x14: [mem 0x80800000-0x808fffff]
[    1.539635] pci 0000:00:1a.0: PME# supported from D0 D3hot
[    1.542839] pci 0000:00:1b.0: [8086:2284] type 00 class 0x040300
[    1.549585] pci 0000:00:1b.0: reg 0x10: [mem 0x80a10000-0x80a13fff 64bit]
[    1.562645] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    1.572538] pci 0000:00:1c.0: [8086:22c8] type 01 class 0x060400
[    1.572654] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    1.582527] pci 0000:00:1c.1: [8086:22ca] type 01 class 0x060400
[    1.592656] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    1.601828] pci 0000:00:1c.2: [8086:22cc] type 01 class 0x060400
[    1.602654] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    1.615770] pci 0000:00:1c.3: [8086:22ce] type 01 class 0x060400
[    1.615770] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    1.629663] pci 0000:00:1f.0: [8086:229c] type 00 class 0x060100
[    1.632881] pci 0000:00:1f.3: [8086:2292] type 00 class 0x0c0500
[    1.639655] pci 0000:00:1f.3: reg 0x10: [mem 0x80a1c000-0x80a1c01f]
[    1.642646] pci 0000:00:1f.3: reg 0x20: [io  0x5000-0x501f]
[    1.652536] pci 0000:01:00.0: [8086:1533] type 00 class 0x020000
[    1.662568] pci 0000:01:00.0: reg 0x10: [mem 0x80600000-0x806fffff]
[    1.669615] pci 0000:01:00.0: reg 0x18: [io  0x4000-0x401f]
[    1.672550] pci 0000:01:00.0: reg 0x1c: [mem 0x80700000-0x80703fff]
[    1.679614] pci 0000:01:00.0: reg 0x30: [mem 0xfff00000-0xffffffff pref]
[    1.682651] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[    1.692660] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    1.702541] pci 0000:00:1c.0:   bridge window [io  0x4000-0x4fff]
[    1.709358] pci 0000:00:1c.0:   bridge window [mem 0x80600000-0x807fffff]
[    1.712660] pci 0000:02:00.0: [8086:1533] type 00 class 0x020000
[    1.719412] pci 0000:02:00.0: reg 0x10: [mem 0x80400000-0x804fffff]
[    1.732573] pci 0000:02:00.0: reg 0x18: [io  0x3000-0x301f]
[    1.738822] pci 0000:02:00.0: reg 0x1c: [mem 0x80500000-0x80503fff]
[    1.742588] pci 0000:02:00.0: reg 0x30: [mem 0xfff00000-0xffffffff pref]
[    1.750201] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[    1.752680] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    1.758236] pci 0000:00:1c.1:   bridge window [io  0x3000-0x3fff]
[    1.772540] pci 0000:00:1c.1:   bridge window [mem 0x80400000-0x805fffff]
[    1.780260] pci 0000:03:00.0: [8086:1533] type 00 class 0x020000
[    1.782568] pci 0000:03:00.0: reg 0x10: [mem 0x80200000-0x802fffff]
[    1.789614] pci 0000:03:00.0: reg 0x18: [io  0x2000-0x201f]
[    1.792551] pci 0000:03:00.0: reg 0x1c: [mem 0x80300000-0x80303fff]
[    1.799615] pci 0000:03:00.0: reg 0x30: [mem 0xfff00000-0xffffffff pref]
[    1.812653] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[    1.822526] pci 0000:00:1c.2: PCI bridge to [bus 03]
[    1.822536] pci 0000:00:1c.2:   bridge window [io  0x2000-0x2fff]
[    1.829352] pci 0000:00:1c.2:   bridge window [mem 0x80200000-0x803fffff]
[    1.842667] pci 0000:04:00.0: [8086:1537] type 00 class 0x020000
[    1.849419] pci 0000:04:00.0: reg 0x10: [mem 0x80000000-0x800fffff]
[    1.852573] pci 0000:04:00.0: reg 0x18: [io  0x1000-0x101f]
[    1.858822] pci 0000:04:00.0: reg 0x1c: [mem 0x80100000-0x80103fff]
[    1.862589] pci 0000:04:00.0: reg 0x30: [mem 0xfff00000-0xffffffff pref]
[    1.870205] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
[    1.882678] pci 0000:00:1c.3: PCI bridge to [bus 04]
[    1.888233] pci 0000:00:1c.3:   bridge window [io  0x1000-0x1fff]
[    1.892535] pci 0000:00:1c.3:   bridge window [mem 0x80000000-0x801fffff]
[    1.900156] pci_bus 0000:00: on NUMA node 0
[    2.978148] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *7
[    2.982681] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
[    2.990528] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[    3.002675] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
[    3.010513] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
[    3.012674] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *7
[    3.020707] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *10 11 12 14 15)
[    3.032682] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    3.047709] SCSI subsystem initialized
[    3.052042] libata version 3.00 loaded.
[    3.052042] ACPI: bus type USB registered
[    3.052558] usbcore: registered new interface driver usbfs
[    3.062567] usbcore: registered new interface driver hub
[    3.068533] usbcore: registered new device driver usb
[    3.074819] PCI: Using ACPI for IRQ routing
[    3.077779] PCI: pci_cache_line_size set to 64 bytes
[    3.077873] e820: reserve RAM buffer [mem 0x0009d000-0x0009ffff]
[    3.077877] e820: reserve RAM buffer [mem 0x752b1000-0x77ffffff]
[    3.077880] e820: reserve RAM buffer [mem 0x7a4bf000-0x7bffffff]
[    3.079929] clocksource: Switched to clocksource tsc-early

konus · March 25, 2023, 4:08pm

continued:

[    3.080101] pnp: PnP ACPI init
[    3.082505] system 00:00: [io  0x0680-0x069f] has been reserved
[    3.089137] system 00:00: [io  0x0400-0x047f] has been reserved
[    3.095769] system 00:00: [io  0x0500-0x05fe] has been reserved
[    3.102407] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    3.102605] pnp 00:01: Plug and Play ACPI device, IDs PNP0501 (active)
[    3.106144] system 00:02: [mem 0x80a34000-0x80a34fff] has been reserved
[    3.113554] system 00:02: [mem 0x80a32000-0x80a32fff] has been reserved
[    3.120951] system 00:02: [mem 0x80a30000-0x80a30fff] has been reserved
[    3.128353] system 00:02: [mem 0x80a1f000-0x80a1ffff] has been reserved
[    3.135755] system 00:02: [mem 0x80a1d000-0x80a1dfff] has been reserved
[    3.143157] system 00:02: [mem 0x80a2e000-0x80a2efff] has been reserved
[    3.150553] system 00:02: [mem 0x80a2c000-0x80a2cfff] has been reserved
[    3.157951] system 00:02: [mem 0x80a2a000-0x80a2afff] has been reserved
[    3.165354] system 00:02: [mem 0x80a28000-0x80a28fff] has been reserved
[    3.172756] system 00:02: [mem 0x80a26000-0x80a26fff] has been reserved
[    3.180152] system 00:02: [mem 0x80a24000-0x80a24fff] has been reserved
[    3.187553] system 00:02: [mem 0x80a22000-0x80a22fff] has been reserved
[    3.194954] system 00:02: [mem 0x80a20000-0x80a20fff] has been reserved
[    3.202366] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    3.202584] system 00:03: [mem 0xe0000000-0xefffffff] could not be reserved
[    3.210373] system 00:03: [mem 0xfea00000-0xfeafffff] has been reserved
[    3.217782] system 00:03: [mem 0xfed01000-0xfed01fff] has been reserved
[    3.225185] system 00:03: [mem 0xfed03000-0xfed03fff] has been reserved
[    3.232587] system 00:03: [mem 0xfed06000-0xfed06fff] has been reserved
[    3.239983] system 00:03: [mem 0xfed08000-0xfed09fff] has been reserved
[    3.247384] system 00:03: [mem 0xfed80000-0xfedbffff] could not be reserved
[    3.255175] system 00:03: [mem 0xfed1c000-0xfed1cfff] has been reserved
[    3.262577] system 00:03: [mem 0xfee00000-0xfeefffff] could not be reserved
[    3.270376] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[    3.270683] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[    3.271078] pnp 00:05: Plug and Play ACPI device, IDs PNP0c31 (active)
[    3.271104] pnp: PnP ACPI: found 6 devices
[    3.282306] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    3.292327] NET: Registered protocol family 2
[    3.297384] IP idents hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    3.306546] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes, linear)
[    3.316114] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    3.325036] TCP bind hash table entries: 16384 (order: 6, 262144 bytes, linear)
[    3.333319] TCP: Hash tables configured (established 16384 bind 16384)
[    3.340711] UDP hash table entries: 1024 (order: 3, 32768 bytes, linear)
[    3.348237] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes, linear)
[    3.356344] NET: Registered protocol family 1
[    3.361237] pci 0000:01:00.0: can't claim BAR 6 [mem 0xfff00000-0xffffffff pref]: no compatible bridge window
[    3.372334] pci 0000:02:00.0: can't claim BAR 6 [mem 0xfff00000-0xffffffff pref]: no compatible bridge window
[    3.383430] pci 0000:03:00.0: can't claim BAR 6 [mem 0xfff00000-0xffffffff pref]: no compatible bridge window
[    3.394531] pci 0000:04:00.0: can't claim BAR 6 [mem 0xfff00000-0xffffffff pref]: no compatible bridge window
[    3.405650] pci 0000:01:00.0: BAR 6: no space for [mem size 0x00100000 pref]
[    3.413544] pci 0000:01:00.0: BAR 6: failed to assign [mem size 0x00100000 pref]
[    3.421817] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    3.427376] pci 0000:00:1c.0:   bridge window [io  0x4000-0x4fff]
[    3.434201] pci 0000:00:1c.0:   bridge window [mem 0x80600000-0x807fffff]
[    3.441802] pci 0000:02:00.0: BAR 6: no space for [mem size 0x00100000 pref]
[    3.449690] pci 0000:02:00.0: BAR 6: failed to assign [mem size 0x00100000 pref]
[    3.457972] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    3.463530] pci 0000:00:1c.1:   bridge window [io  0x3000-0x3fff]
[    3.470347] pci 0000:00:1c.1:   bridge window [mem 0x80400000-0x805fffff]
[    3.477953] pci 0000:03:00.0: BAR 6: no space for [mem size 0x00100000 pref]
[    3.485841] pci 0000:03:00.0: BAR 6: failed to assign [mem size 0x00100000 pref]
[    3.494119] pci 0000:00:1c.2: PCI bridge to [bus 03]
[    3.499671] pci 0000:00:1c.2:   bridge window [io  0x2000-0x2fff]
[    3.506493] pci 0000:00:1c.2:   bridge window [mem 0x80200000-0x803fffff]
[    3.514097] pci 0000:04:00.0: BAR 6: no space for [mem size 0x00100000 pref]
[    3.521979] pci 0000:04:00.0: BAR 6: failed to assign [mem size 0x00100000 pref]
[    3.530258] pci 0000:00:1c.3: PCI bridge to [bus 04]
[    3.535816] pci 0000:00:1c.3:   bridge window [io  0x1000-0x1fff]
[    3.542639] pci 0000:00:1c.3:   bridge window [mem 0x80000000-0x801fffff]
[    3.550231] pci_bus 0000:00: resource 4 [io  0x0070-0x0077]
[    3.556467] pci_bus 0000:00: resource 5 [io  0x0000-0x006f window]
[    3.563381] pci_bus 0000:00: resource 6 [io  0x0078-0x0cf7 window]
[    3.570290] pci_bus 0000:00: resource 7 [io  0x0d00-0xffff window]
[    3.577209] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
[    3.584904] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
[    3.592598] pci_bus 0000:00: resource 10 [mem 0x000e0000-0x000fffff window]
[    3.600382] pci_bus 0000:00: resource 11 [mem 0x80000000-0xdfffffff window]
[    3.608172] pci_bus 0000:01: resource 0 [io  0x4000-0x4fff]
[    3.614407] pci_bus 0000:01: resource 1 [mem 0x80600000-0x807fffff]
[    3.621416] pci_bus 0000:02: resource 0 [io  0x3000-0x3fff]
[    3.627641] pci_bus 0000:02: resource 1 [mem 0x80400000-0x805fffff]
[    3.634658] pci_bus 0000:03: resource 0 [io  0x2000-0x2fff]
[    3.640888] pci_bus 0000:03: resource 1 [mem 0x80200000-0x803fffff]
[    3.647900] pci_bus 0000:04: resource 0 [io  0x1000-0x1fff]
[    3.654135] pci_bus 0000:04: resource 1 [mem 0x80000000-0x801fffff]
[    3.663185] PCI: CLS 64 bytes, default 64
[    3.667956] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x171024fa93b, max_idle_ns: 440795253189 ns
[    3.679184] clocksource: Switched to clocksource tsc
[    3.686932] workingset: timestamp_bits=46 max_order=19 bucket_order=0
[    3.696247] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    3.703153] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    3.713273] hv_vmbus: registering driver hyperv_fb
[    3.718675] intel_idle: MWAIT substates: 0x33000020
[    3.718678] intel_idle: v0.5.1 model 0x4C
[    3.719378] intel_idle: Local APIC timer is reliable in all C-states
[    3.719760] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:01/input/input0
[    3.729280] ACPI: Power Button [PWR2]
[    3.733495] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[    3.742910] ACPI: Sleep Button [SLPB]
[    3.747111] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    3.755726] ACPI: Power Button [PWRF]
[    3.765748] thermal LNXTHERM:00: registered as thermal_zone0
[    3.772088] ACPI: Thermal Zone [TZ01] (27 C)
[    3.777162] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
[    3.804791] 00:01: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    3.814404] Non-volatile memory driver v1.3
[    3.819234] Linux agpgart interface v0.103
[    3.827186] loop: module loaded
[    3.830788] Guest personality initialized and is inactive
[    3.836897] VMCI host device registered (name=vmci, major=10, minor=63)
[    3.844312] Initialized host personality
[    3.848995] Loading iSCSI transport class v2.0-870.
[    3.855469] VMware PVSCSI driver - version 1.0.7.0-k
[    3.861080] hv_vmbus: registering driver hv_storvsc
[    3.867715] ahci 0000:00:13.0: version 3.0
[    3.868138] ahci 0000:00:13.0: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[    3.877228] ahci 0000:00:13.0: flags: 64bit ncq led clo only pio slum part deso sadm sds apst
[    3.887618] scsi host0: ahci
[    3.891464] scsi host1: ahci
[    3.894861] ata1: SATA max UDMA/133 abar m2048@0x80a2f000 port 0x80a2f100 irq 119
[    3.903256] ata2: SATA max UDMA/133 abar m2048@0x80a2f000 port 0x80a2f180 irq 119
[    3.911996] VMware vmxnet3 virtual NIC driver - version 1.5.0.0-k-NAPI
[    3.919344] hv_vmbus: registering driver hv_netvsc
[    3.924710] Fusion MPT base driver 3.04.20
[    3.929280] Copyright (c) 1999-2008 LSI Corporation
[    3.934749] Fusion MPT SPI Host driver 3.04.20
[    3.939751] Fusion MPT SAS Host driver 3.04.20
[    3.944773] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    3.952076] ehci-pci: EHCI PCI platform driver
[    3.957087] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    3.964022] ohci-pci: OHCI PCI platform driver
[    3.969022] ohci-platform: OHCI generic platform driver
[    3.974905] uhci_hcd: USB Universal Host Controller Interface driver
[    3.982404] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    3.988277] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[    3.997730] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000081509810
[    4.008044] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    4.017083] hub 1-0:1.0: USB hub found
[    4.021435] hub 1-0:1.0: 7 ports detected
[    4.028348] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    4.034218] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    4.042500] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[    4.050965] hub 2-0:1.0: USB hub found
[    4.055283] hub 2-0:1.0: 6 ports detected
[    4.061654] usbcore: registered new interface driver usb-storage
[    4.068486] i8042: PNP: No PS/2 controller found.
[    4.073759] hv_vmbus: registering driver hyperv_keyboard
[    4.079776] rtc_cmos 00:04: RTC can wake from S4
[    4.085422] rtc_cmos 00:04: registered as rtc0
[    4.090763] rtc_cmos 00:04: setting system clock to 2023-03-25T15:29:00 UTC (1679758140)
[    4.099829] rtc_cmos 00:04: alarms up to one month, y3k, 242 bytes nvram
[    4.109067] intel_pstate: Intel P-state driver initializing
[    4.116035] sdhci: Secure Digital Host Controller Interface driver
[    4.122998] sdhci: Copyright(c) Pierre Ossman
[    4.128268] hid: raw HID events driver (C) Jiri Kosina
[    4.129603] mmc0: SDHCI controller on ACPI [INT33BB:00] using ADMA
[    4.134074] hv_vmbus: registering driver hid_hyperv
[    4.146484] usbcore: registered new interface driver usbhid
[    4.152716] usbhid: USB HID core driver
[    4.154084] mmc1: SDHCI controller on ACPI [80860F14:00] using ADMA
[    4.157152] hv_utils: Registering HyperV Utility Driver
[    4.169876] hv_vmbus: registering driver hv_utils
[    4.175137] hv_vmbus: registering driver hv_balloon
[    4.181056] NET: Registered protocol family 10
[    4.187518] Segment Routing with IPv6
[    4.191924] NET: Registered protocol family 17
[    4.197092] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[    4.212280] 8021q: 802.1Q VLAN Support v1.8
[    4.217020] NET: Registered protocol family 40
[    4.223344] microcode: sig=0x406c4, pf=0x1, revision=0x40a
[    4.229700] microcode: Microcode Update Driver: v2.2.
[    4.229710] IPI shorthand broadcast: enabled
[    4.240538] SSE version of gcm_enc/dec engaged.
[    4.243026] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    4.251761] sched_clock: Marking stable (3323428850, 928139425)->(4421802988, -170234713)
[    4.252849] ata2: SATA link down (SStatus 0 SControl 300)
[    4.261996] registered taskstats version 1
[    4.278567] ata1.00: NCQ Send/Recv Log not supported
[    4.284226] ata1.00: ATA-10: InnoDisk Corp. - mSATA 3ME4, L17606, max UDMA/133
[    4.292315] ata1.00: 31277232 sectors, multi 1: LBA48 NCQ (depth 32), AA
[   19.372956] ata1.00: qc timeout (cmd 0x47)
[   19.380206] ata1.00: READ LOG DMA EXT failed, trying PIO
[   19.386240] ata1.00: NCQ Send/Recv Log not supported
[   19.391838] ata1.00: configured for UDMA/133
[   19.724974] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[   19.742592] ata1.00: NCQ Send/Recv Log not supported
[   19.764706] ata1.00: NCQ Send/Recv Log not supported
[   19.770318] ata1.00: configured for UDMA/133
[   19.775968] scsi 0:0:0:0: Direct-Access     ATA      InnoDisk Corp. - 06   PQ: 0 ANSI: 5
[   19.787063] sd 0:0:0:0: [sda] 31277232 512-byte logical blocks: (16.0 GB/14.9 GiB)
[   19.795757] sd 0:0:0:0: [sda] Write Protect is off
[   19.801150] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   19.801549] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   19.819664] Alternate GPT is invalid, using primary GPT.
[   19.825666]  sda: sda1 sda2 sda128
[   19.830818] sd 0:0:0:0: [sda] Attached SCSI disk
[   20.901814] EXT4-fs (sda2): mounted filesystem without journal. Opts: (null)
[   20.909766] VFS: Mounted root (ext4 filesystem) readonly on device 8:2.
[   20.919043] Freeing unused kernel image (initmem) memory: 1460K
[   20.983041] Write protecting the kernel read-only data: 20480k
[   20.992938] Freeing unused kernel image (text/rodata gap) memory: 2044K
[   21.002877] Freeing unused kernel image (rodata/data gap) memory: 2016K
[   21.010839] Run /sbin/init as init process
[   21.015438]   with arguments:
[   21.015442]     /sbin/init
[   21.015445]   with environment:
[   21.015447]     HOME=/
[   21.015450]     TERM=linux
[   21.015454]     BOOT_IMAGE=/boot/vmlinuz
[   21.050266] init: Console is alive
[   21.129393] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[   21.143173] pps_core: LinuxPPS API ver. 1 registered
[   21.148737] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[   21.163098] PTP clock support registered
[   21.173367] Button Hotplug driver version 0.4.1
[   21.183275] igb: Intel(R) Gigabit Ethernet Network Driver
[   21.189329] igb: Copyright (c) 2007-2014 Intel Corporation.
[   21.226719] pps pps0: new PPS source ptp0
[   21.231293] igb 0000:01:00.0: added PHC on eth0
[   21.236395] igb 0000:01:00.0: Intel(R) Gigabit Ethernet Network Connection
[   21.244100] igb 0000:01:00.0: eth0: (PCIe:2.5Gb/s:Width x1) 00:90:7f:03:a5:30
[   21.252147] igb 0000:01:00.0: eth0: PBA No: 000300-000
[   21.257904] igb 0000:01:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)
[   21.297562] pps pps1: new PPS source ptp1
[   21.302136] igb 0000:02:00.0: added PHC on eth1
[   21.307238] igb 0000:02:00.0: Intel(R) Gigabit Ethernet Network Connection
[   21.314944] igb 0000:02:00.0: eth1: (PCIe:2.5Gb/s:Width x1) 00:90:7f:03:a5:31
[   21.322998] igb 0000:02:00.0: eth1: PBA No: 000300-000
[   21.328746] igb 0000:02:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)
[   21.368354] pps pps2: new PPS source ptp2
[   21.372935] igb 0000:03:00.0: added PHC on eth2
[   21.378008] igb 0000:03:00.0: Intel(R) Gigabit Ethernet Network Connection
[   21.385714] igb 0000:03:00.0: eth2: (PCIe:2.5Gb/s:Width x1) 00:90:7f:03:a5:32
[   21.393773] igb 0000:03:00.0: eth2: PBA No: 000300-000
[   21.399522] igb 0000:03:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)
[   21.436127] pps pps3: new PPS source ptp3
[   21.440710] igb 0000:04:00.0: added PHC on eth3
[   21.445810] igb 0000:04:00.0: Intel(R) Gigabit Ethernet Network Connection
[   21.453519] igb 0000:04:00.0: eth3: (PCIe:2.5Gb/s:Width x1) 00:a0:c9:00:00:00
[   21.461569] igb 0000:04:00.0: eth3: PBA No: 000300-000
[   21.467328] igb 0000:04:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)
[   23.455410] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[   23.469729] init: - preinit -
[   23.604913] random: jshn: uninitialized urandom read (4 bytes read)
[   23.642289] random: jshn: uninitialized urandom read (4 bytes read)
[   23.659447] random: jshn: uninitialized urandom read (4 bytes read)
[   23.754702] 8021q: adding VLAN 0 to HW filter on device eth0
[   27.877973] mount_root: mounting /dev/root
[   27.885371] EXT4-fs (sda2): re-mounted. Opts: (null)
[   28.076355] urandom-seed: Seeding with /etc/urandom.seed
[   28.141848] procd: - early -
[   28.706577] procd: - ubus -
[   28.718762] random: ubusd: uninitialized urandom read (4 bytes read)
[   28.760555] random: ubusd: uninitialized urandom read (4 bytes read)
[   28.767985] random: ubusd: uninitialized urandom read (4 bytes read)
[   28.779810] procd: - init -
[   28.914967] urngd: v1.0.2 started.
[   28.933343] random: crng init done
[   28.937157] random: 25 urandom warning(s) missed due to ratelimiting
[   28.945878] kmodloader: loading kernel modules from /etc/modules.d/*
[   28.971709] e1000: Intel(R) PRO/1000 Network Driver
[   28.977222] e1000: Copyright (c) 1999-2006 Intel Corporation.
[   28.988905] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver
[   28.995780] ixgbe: Copyright (c) 1999-2016 Intel Corporation.
[   29.005299] i2c /dev entries driver
[   29.038867] e1000e: Intel(R) PRO/1000 Network Driver
[   29.044507] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[   29.055122] Intel(R) 2.5G Ethernet Linux Driver
[   29.060198] Copyright(c) 2018 Intel Corporation.
[   29.101671] PPP generic driver version 2.4.2
[   29.107588] NET: Registered protocol family 24
[   29.117389] kmodloader: done loading kernel modules from /etc/modules.d/*
[   31.964130] 8021q: adding VLAN 0 to HW filter on device eth1
[   31.970983] br-lan: port 1(eth1) entered blocking state
[   31.976946] br-lan: port 1(eth1) entered disabled state
[   31.982984] device eth1 entered promiscuous mode
[   32.014128] 8021q: adding VLAN 0 to HW filter on device eth2
[   32.020876] br-lan: port 2(eth2) entered blocking state
[   32.026771] br-lan: port 2(eth2) entered disabled state
[   32.032781] device eth2 entered promiscuous mode
[   32.053883] 8021q: adding VLAN 0 to HW filter on device eth3
[   32.060293] igb 0000:04:00.0 eth3: igb: eth3 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
[   32.062967] br-lan: port 3(eth3) entered blocking state
[   32.076609] br-lan: port 3(eth3) entered disabled state
[   32.082796] device eth3 entered promiscuous mode
[   32.091116] br-lan: port 3(eth3) entered blocking state
[   32.096987] br-lan: port 3(eth3) entered forwarding state
[   32.103383] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
[   32.133511] 8021q: adding VLAN 0 to HW filter on device eth0

Original board before removal of R607:

stephenw10 · April 6, 2023, 2:41pm

Did you try to enable access to the switch on igb3 at all?

stephenw10 · April 6, 2023, 3:38pm

Mmm, maybe that MDIO bus code isn't in OpenWRT:

I had thought it was form the Velocloud sources but it looks like it was custom and not upstreamed.

konus · April 6, 2023, 7:49pm

As far as I understand from the post on the netgate forum a custom driver / code is needed to get the switch to work. That is way above my skill level but removing a small resistor is no problem

stephenw10 · April 7, 2023, 2:47pm

In FreeBSD it does. I was hoping OpenWRT might already contain some way to access it but it looks like it doesn't. At least not via the igb mii interface. There are devices running Linux that are configured like this though. The Watchguard OS itself is that.
The T70 does have that set of dip switches that appear to be for moving the switch config interface though.