on wa901v4 i tryed to flash some openwrt these one https://archive.openwrt.org/snapshots/targets/ar71xx/tiny/openwrt-ar71xx-tiny-tl-wa901nd-v4-squashfs-sysupgrade.bin i lost after that acces on ui and i go to soft reset with firstboot && reboot now after that was same i cant acces ui than i was typed umount /overlay && jffs2reset && reboot now and still all same like is bricked is it? wifi guard is seen ip address 192.168.1.1 on lan but i can only acces via ssh can i do somthing with putty on ssh port?
snapshots are web UI less, there's only SSH.
you could try the ath79 images, they come with web UI
how to do that is cli command promt ?
what is download link for that 79 ath for wa901v4 please
is it posibile just to enable wifi and via that acces?
yup, that's what the link I provided is for.
Yes, it comes with wifi (the ath79 is the new, physically smaller, wifi driver)
how to do that how to turn on wifi frollic please help me friend
ssh is like these
BusyBox v1.31.0 () built-in shell (ash) _______ ________ __ | |.-----.-----.-----.| | | |.----.| |_ | - || _ | -__| || | | || _|| _| |_______|| __|_____|__|__||________||__| |____| |__| W I R E L E S S F R E E D O M ----------------------------------------------------- OpenWrt SNAPSHOT, r10242-3c401f4
is memory free sorry i do these firs time
root@OpenWrt:~# free total used free shared buff/cache available Mem: 27220 14132 5652 88 7436 10768 Swap: 0 0 0 root@OpenWrt:~# ^C
you don't need wifi to flash the fw, just use wget.
ok i try now step by step
i downloaded these image says sysimage
https://openwrt.ashus.net/19.07.2-targets-ath79-tiny-luci-upnp/openwrt-ath79-tiny-tplink_tl-wa901nd-v2-squashfs-sysupgrade.bin oh no its for v2 where is for v4?
great, good luck with the flashing.
thanks i need it i copied in tmp folder fw now i really need to flash via putty i copied via scp
need to past enter in putty currently
sysupgrade -v /tmp/openwrt-ath79-tiny-tplink_tl-wa901nd-v4-squashfs-sysupgrade.bin