wa901NDv3 is there lede/openwrt for wa

Installing and Using OpenWrt
21

ok so i be able to flash with lower version if reset to defoult via web? is that ok?

22

You keep asking about a particular version, you'll know if you:

  • soft brick;
  • or cannot save settings

Luckily, it seems (from what I'm reading) like this device won't over flash, causing a hard brick in some devices (I don't know this for sure).

1 Like
23

but i love openwrt :frowning:

1 Like
24

is there anyone to suggest me lower verions of openwrt for wa901ndv3 wich it work ok?

25

Using old versions is never recommended.

2 Likes
26

They would be a fool to suggest an older version with known vulnerabilities - discovered over time.

Supported Since Rel: 14.07

Supported Current Rel: 18.06.9

~ from https://openwrt.org/toh/hwdata/tp-link/tp-link_tl-wa901nd_v3

1 Like
27

so i must to use 18.06.9 what is the beste sysupgrade , or facory openwrt file?

28

:man_facepalming:

I understand you really want to use this router badly. Personally, I cannot continue to proceed when it's clear you're receiving contrary advise. You should know (using OpenWrt since 2015, and having made/responded to many threads) that you have to use the correct file for the install you're performing (i.e. factory or upgrading OpenWrt) - see the Wiki.

I admire your spunk and wish you well!

2 Likes
29

i see i will use factory openwrt bin file. just to say these in these post


  thttps://forum.archive.openwrt.org/viewtopic.php?id=46990

one man says that he used ooonix opnewrt is that ok? or better is 18.06.9 factory openwrt.bin ? and andyx fw are lite ? is that maybe good?

30

lleachii thank you so much i need it friend :slight_smile:

1 Like
31

one thing is giving me hope v4 page openwrt details for router

https://openwrt.org/toh/hwdata/tp-link/tp-link_tl-wa901nd_v4

also have red write warrning and i use v4 long time and shows verry ok :slight_smile: i had smal problems with cli wich i solved for 90 minutes before that same ram and flash memory like v3 works full right :slight_smile: so i think it be good

32

works ok :slight_smile: thank you open wrt,even success installed uhttpd for ports app

https://i.imgur.com/tsJpDmZ.jpeg

i uset these openwrt

https://downloads.openwrt.org/releases/18.06.9/targets/ar71xx/tiny/openwrt-18.06.9-ar71xx-tiny-tl-wa901nd-v3-squashfs-factory.bin

ui works softly good speed responding ok saving changes

its super fantastic :slight_smile: thank you openwrt

1 Like
33

This topic was automatically closed 10 days after the last reply. New replies are no longer allowed.