(I've extended both networks to separate wifi SSIDs, in which you might see where this is going).
My challenge is:
When I'm on VLAN20 I have no internet connection. Or I cannot reach anything other than the gw/OpenWRT and other devices on the same VLAN. This goes nevertheless if my firewall is connected to the VPN-server or not. (Pasted snippet of my OpenVPN tab further down).
When connected to VLAN50, I reach both the LAN on the VPN server side as well as getting online through the external network. Which is fine/as it shall be. Not that it's relevant to me and how I want stuff to run, but for the sake of the trouble shooting: When I disconnect OpenWRT from the OpenVPN server, I also loose internet traffic through to wan.
OpenVPN client on OpenWRT GUI:
I wasn't allowed to put more media in this post....
My goal:
Wanting to reach the VPN network as of now, through VLAN50.
Wanting to have regular internet access through VLAN20, independent of which my OpenVPN connection is up/down.
What more do you guys need? Any configs I should share?
Thanks for any help here, hope that I made this easy enough to read etc.
Hey, thanks trendy and vgaetera for helping out.
Got it working as I want to.
One more thing I do not understand. I've tried to read about it, and it's the formatting I don't seem to understand... I want to change the name server addresses assigned by the DHCP server. For one network interface.
Understand I can do this either in terminal by editing the config file, or type something similar in one field under Advanced Settings in the DHCP Server tab on the interface. I tried the following without any changes on the clients side: 6,192.168.1.50
What is the no. 6 mean? (The IP addr. is the DC and DNS server on one of the LANs.)