Hello all,
These errors are normal when mounting a USB on a wrt1900acs v2 Kernel Version
5.4.45, It should be noted that wrt190acs v2 supports usb 3.0 ?!
Those errors are not happening when mounting the drive, you are installing the packages...
When you get the message “Cannot satisfy the following dependencies for…” it is most likely because you installed a snapshot version of OpenWrt.
Read here for possible solutions.
3 Likes
Can anyone confirm if I managed to mount the stick?
root@swrt:~# opkg update && opkg install block-mount e2fsprogs kmod-fs-ext4 kmod
-usb-storage kmod-usb2 kmod-usb3
Downloading http://downloads.lede-project.org/snapshots/targets/mvebu/cortexa9/p ackages/Packages.gz
Updated list of available packages in /var/opkg-lists/superwrt_core
Downloading http://downloads.lede-project.org/snapshots/targets/mvebu/cortexa9/p ackages/Packages.sig
Signature check passed.
Downloading http://downloads.lede-project.org/snapshots/packages/arm_cortex-a9_v fpv3-d16/base/Packages.gz
Updated list of available packages in /var/opkg-lists/superwrt_base
Downloading http://downloads.lede-project.org/snapshots/packages/arm_cortex-a9_v fpv3-d16/base/Packages.sig
Signature check passed.
Downloading http://downloads.lede-project.org/snapshots/packages/arm_cortex-a9_v fpv3-d16/luci/Packages.gz
Updated list of available packages in /var/opkg-lists/superwrt_luci
Downloading http://downloads.lede-project.org/snapshots/packages/arm_cortex-a9_v fpv3-d16/luci/Packages.sig
Signature check passed.
Downloading http://downloads.lede-project.org/snapshots/packages/arm_cortex-a9_v fpv3-d16/packages/Packages.gz
Updated list of available packages in /var/opkg-lists/superwrt_packages
Downloading http://downloads.lede-project.org/snapshots/packages/arm_cortex-a9_v fpv3-d16/packages/Packages.sig
Signature check passed.
Downloading http://downloads.lede-project.org/snapshots/packages/arm_cortex-a9_v fpv3-d16/routing/Packages.gz
Updated list of available packages in /var/opkg-lists/superwrt_routing
Downloading http://downloads.lede-project.org/snapshots/packages/arm_cortex-a9_v fpv3-d16/routing/Packages.sig
Signature check passed.
Package block-mount (2020-05-12-84269037-1) installed in root is up to date.
Package e2fsprogs (1.45.6-1) installed in root is up to date.
Upgrading kmod-fs-ext4 on root from 5.4.45-1 to 5.4.46-1...
Downloading http://downloads.lede-project.org/snapshots/targets/mvebu/cortexa9/packages/kmod-fs-ext4_5.4.46-1_arm_cortex-a9_vfpv3-d16.ipk
Upgrading kmod-usb-storage on root from 5.4.45-1 to 5.4.46-1...
Downloading http://downloads.lede-project.org/snapshots/targets/mvebu/cortexa9/packages/kmod-usb-storage_5.4.46-1_arm_cortex-a9_vfpv3-d16.ipk
Upgrading kmod-usb2 on root from 5.4.45-1 to 5.4.46-1...
Downloading http://downloads.lede-project.org/snapshots/targets/mvebu/cortexa9/packages/kmod-usb2_5.4.46-1_arm_cortex-a9_vfpv3-d16.ipk
Upgrading kmod-usb3 on root from 5.4.45-1 to 5.4.46-1...
Downloading http://downloads.lede-project.org/snapshots/targets/mvebu/cortexa9/packages/kmod-usb3_5.4.46-1_arm_cortex-a9_vfpv3-d16.ipk
Collected errors:
* satisfy_dependencies_for: Cannot satisfy the following dependencies for kmod-fs-ext4:
* kernel (= 5.4.46-1-0adca1c1acedb5e08a79b8fdac8553b9)
* opkg_install_cmd: Cannot install package kmod-fs-ext4.
* satisfy_dependencies_for: Cannot satisfy the following dependencies for kmod-usb-storage:
* kernel (= 5.4.46-1-0adca1c1acedb5e08a79b8fdac8553b9)
* opkg_install_cmd: Cannot install package kmod-usb-storage.
* satisfy_dependencies_for: Cannot satisfy the following dependencies for kmod-usb2:
* kernel (= 5.4.46-1-0adca1c1acedb5e08a79b8fdac8553b9)
* opkg_install_cmd: Cannot install package kmod-usb2.
* satisfy_dependencies_for: Cannot satisfy the following dependencies for kmod-usb3:
* kernel (= 5.4.46-1-0adca1c1acedb5e08a79b8fdac8553b9)
* opkg_install_cmd: Cannot install package kmod-usb3.
root@swrt:~# mkfs.ext4 /dev/sda1
mke2fs 1.45.6 (20-Mar-2020)
/dev/sda1 contains a vfat file system
Proceed anyway? (y,N) y
Creating filesystem with 944688 4k blocks and 236176 inodes
Filesystem UUID: 7a1c8251-fb23-4261-8e0c-c08244e545a8
Superblock backups stored on blocks:
32768, 98304, 163840, 229376, 294912, 819200, 884736
Allocating group tables: done
Writing inode tables: done
Creating journal (16384 blocks): done
Writing superblocks and filesystem accounting information: done
root@swrt:~# block detect | uci import fstab
root@swrt:~# uci set fstab.@mount[0].enabled='1' && uci set fstab.@global[0].anon_mount='1' && uci commit
root@swrt:~# /sbin/block mount && service fstab enable
block: No "mount.ubi" utility available
block: mounting /dev/mtdblock7 (ubi) as /mnt/mtdblock7 failed (2) - No such file or directory
block: No "mount.ubi" utility available
block: mounting /dev/mtdblock8 (ubi) as /mnt/mtdblock8 failed (2) - No such file or directory
root@swrt:~# ls -al /dev/sd*
brw------- 1 root root 8, 0 Jun 22 07:43 /dev/sda
brw------- 1 root root 8, 1 Jun 22 07:47 /dev/sda1
root@swrt:~#
I would like to set my database path on the usb stick to stop using the internal flash for so many writes.
Everything that means adblock and statistics with graphs ....
What would be the commands on the command line, to use this usb for collection?
Yes, the drive has been mounted at /mnt/sda1.
Can someone help me or guide me with the commands on the command line to use this usb?
I would like to set my database path on the usb stick to stop using the internal flash for so many writes..
Everything that means adblock and statistics with graphs .
Thanks
We have solved this problem, this topic can be closed.
Thx
This topic was automatically closed 10 days after the last reply. New replies are no longer allowed.