New v21.02.4 build:
https://jmomo.net/files/lede/TRENDnet_TEW-827DRU_20221013024558_OpenWRT_v21.02.4_luci/bin/
New v22.03.1 build:
https://jmomo.net/files/lede/TRENDnet_TEW-827DRU_20221013045607_OpenWRT_v22.03.1_luci/bin/
1 Like
New build for v21.02.5:
https://jmomo.net/files/lede/TRENDnet_TEW-827DRU_20221018035243_OpenWRT_v21.02.5_luci/bin/
New build for v22.03.2:
https://jmomo.net/files/lede/TRENDnet_TEW-827DRU_20221018175240_OpenWRT_v22.03.2_luci/bin/
No change to patches.
1 Like
How can i help You to finish making support with official openwrt build?
OpenWRT/LEDE Project leaders previously rejected all of my patches and I didn't see any situation where it was possible to get them merged so I gave up trying. If someone else wants to take my work and move on with it, you are welcome to do so.
1 Like
Hey @jmomo
Thanks for preparing images for TEW-827DRU.
I am wondering whether you could make one time build with addition of NSS from Ipq806x NSS build (Netgear R7800 / TP-Link C2600 / Linksys EA8500)?
Few guys already asked author of above images to build extra target, but so far no luck.
OpenWrt 22.03.3 was released today. It may be a couple of weeks before I can do a build, due to heavy work and personal obligations I have right now.
2 Likes
Thanks for the update, hope you’re doing well.
New build 22.03.3 is out:
https://jmomo.net/files/lede/TRENDnet_TEW-827DRU_20230128033123_OpenWRT_v22.03.3_luci/bin/
I have not tested this. Report back if you have any install problems.
2 Likes
New builds are out. I did both a v21.02 and v22.03 so be sure to grab the right one.
https://jmomo.net/files/lede/TRENDnet_TEW-827DRU_20230414185418_OpenWRT_v21.02.6_luci/bin/
https://jmomo.net/files/lede/TRENDnet_TEW-827DRU_20230414203244_OpenWRT_v22.03.4_luci/bin/
I have not tested these. Please report any problems if you find them.
1 Like
Due to a busy schedule, I may not be able to produce new builds for the latest release any time soon. It might be 6-12 weeks from now. I'm not sure. Eventually I will get around to it.
1 Like
New builds are out.
https://jmomo.net/files/lede/TRENDnet_TEW-827DRU_20230626233627_OpenWRT_v21.02.7_luci/bin/
https://jmomo.net/files/lede/TRENDnet_TEW-827DRU_20230627014555_OpenWRT_v22.03.5_luci/bin/
3 Likes
Thanks jmomo! I'll give it a try, what about v22 is it stable?
Using v22 for a while, everything is fine but docker
what about v22 is it stable?
In a word, yes.
It's going to be as stable as all other ipq806x devices. The code that is specific to this hardware doesn't affect stability or performance compared to other models.
The one thing that is unique about this device is the SLC NAND flash, which is better than most other models. It's super fast, relatively large compared to NOR devices and even other NAND devices, and it has the freespace area and second redundant system partitions which you can use for logs or something else.
1 Like
I have started working on v23.05.0. It might be a few days/weeks before I am done and there are new patches and builds. I'm low on free time.
3 Likes
Looking forward to a new build, any idea when you have time to finish it ?
Thx !
1 Like
Hi jmomo,
Any news about 23.05.x?
Thanks a lot.
Yes I will be doing a rebuild here soon. I've been busy with life stuff lately, but it's still on my task list.
In fact I think I already built and published the last version. I think I just forgot to do an announcement here. I'll look into it and you should hear from me in the next week or so.
1 Like
New patch set v20 is for OpenWRT v23.05.x.
New builds are out.
https://jmomo.net/files/openwrt/TRENDnet_TEW-827DRU_20240329020701_OpenWRT_v23.05.3_luci/bin/
I also did a build for v22.03.6 back in December but forgot to post it.
https://jmomo.net/files/openwrt/TRENDnet_TEW-827DRU_20231205164135_OpenWRT_v22.03.6_luci/bin/
Remember to always back up your config and files before upgrades.
3 Likes