I finally could install latest openwrt, and debian, on my UFI001B . The stick finally boots regularly, but with both, the modem is down (what that I already had read, but I had hoped it was been fixed).
What attempt would you recommend to try to fix the modem?
TThanks
Also, how to see imei on openwrt or debian?
TThanks
edl?9008 mode? Plug it into your computer with the push of a button and voilà.
https://www.kancloud.cn/a813630449/ufi_car/2792820
我使用这里的openwrt，modem工作正常。
当然你也可以试试。
注意要和主板丝印版号一样。
如果123盘有下载问题，留言，我帮你转存onedrive。
我使用这里的openwrt，modem工作正常。
当然你也可以试试。
注意要和主板丝印版号一样。
如果123盘有下载问题，留言，我帮你转存onedrive。
I am using openwrt here, and the modem is working properly.
Of course, you can also give it a try.
Be sure to match the screen printing version number of the motherboard.
If there is a download issue with drive 123, leave a message and I will transfer it to onedrive for you.
Hi, thanks, 123pan.com doesn't work for me.
I downloaded from here, they seem the same files:
https://nas.nsoft.vip:7700/?dir=/Linux/ufi_rom/
I tried both openwrt and debian, UFI001B.zip , for my stick
Flashed successfully many times, but the modem never works.
Maybe the files I'm flashing are incorrect?
TThanks
The ones from Jack are more recent August 2023 in wrt.
Cannot access either
You're correct, openwrt are more recent. So hope Jack can share the latest, August 2023, .... because 123pan.com doesn't let download......
ditto
no way to get access
It seems that you all have access issues with 123pan.
I started switching to one drive.
A few Gs, be patient and wait for a few hours.
all 前言 · 随身WIFI做主控的4G远程遥控车教程 · 看云 (kancloud.cn)
Transfer to onedrive
Use files that match the screen printing on your motherboard.
adb reboot bootloader
flash.bat or flash.sh
Thanks, very appreciate your sharing.
Unfortunately the latest 2023 releases, of openwrt , all softbricked my UFI001B .
The only release that boots regularly, and for this I reflashed it, is a older release of debian , that I had already tried and yes it's the only one that boots... yes it boots... but the modem doesn't work...!!
Guys I'm quiting, really
Press the button to insert the computer, which is the eld mode
Maybe you should try compiling handsomemod yourself.
It directly supports your 001B.
I compiled a 001B based on HandsomeMod, at least adb and rndis are working properly.jack_001B.7z
https://vb4jy-my.sharepoint.com/:f:/g/personal/share_vb4jy_onmicrosoft_com/EvjANAxgrSBEtbQPujcNJogBoRrCpx5pEQ3WSN2Vh0h8Dg?e=08cUMw
I have no idea how compile....
Anyway I'll flash of course that your, see what happens
Although I don't have 001B, the firmware I compiled can recognize ADB and RNDIS. Lazy, there is no luci interface.
If you can recognize adb and rndis normally, I will continue to help you compile the firmware that suits you.
It would be great, but you should tell me exactly what to do, step by step
Anyway as said I tried to flash jack_001B release, for curiosity, but I receive errors only (and the stick remains accessible via fastboot)
About recognizing adb and rndis, yes the stick recognizes them ... although plugging it in the usb port, in normal mode, every time it comes seen as a "new" lan network on Windows (Network 2, 3, 4, 5, 6, 7, etc...etc...) I mean it never comes seen as the same network. But apart from that, it always connects to usb-lan and works regularly.....
....It's just the lte modem that won't work, it always shows "Modem bearer teardown in progress"
Can the 001B I transferred recognize ADB rndis?
Ignore the error message, it actually works.
Flashing jack_001B I get this:
ÍÏ㶢°╚Ùbootloader─ú╩¢
In attesa da 0 secondi. Per uscire, premere CTRL+C...
error: no devices/emulators found
Erasing 'boot' OKAY [ 0.132s]
Finished. Total time: 0.138s
Erasing 'rootfs' FAILED (remote: 'Partition table doesn't exist
')
fastboot: error: Command failed
Rebooting OKAY [ 0.016s]
Finished. Total time: 0.016s
flashing stickwrt_istore!
when detected a fastboot device
In attesa da 0 secondi. Per uscire, premere CTRL+C...
Warning: skip copying boot image avb footer (boot partition size: 0, boot image size: 5274457).
Sending 'boot' (5150 KB) OKAY [ 0.170s]
Writing 'boot' OKAY [ 0.600s]
Finished. Total time: 0.820s
Sending 'rootfs' (69454 KB) OKAY [ 2.314s]
Writing 'rootfs' FAILED (remote: 'partition table doesn't exist')
fastboot: error: Command failed
Rebooting OKAY [ 0.000s]
Finished. Total time: 0.000s
all done!!
Premere un tasto per continuare . . .
And the stick remains seen as ADB (Fastboot) , there's no rndis active, I think
