TP-Link C7 v4 5Ghz wi-fi crash/disappearing

Installing and Using OpenWrt
1

I am using a TP-Link C7 v4 as an Access Point.

Running:

DISTRIB_ID='OpenWrt'
DISTRIB_RELEASE='23.05.5'
DISTRIB_REVISION='r24106-10cc5fcd00'
DISTRIB_TARGET='ath79/generic'
DISTRIB_ARCH='mips_24kc'
DISTRIB_DESCRIPTION='OpenWrt 23.05.5 r24106-10cc5fcd00'
DISTRIB_TAINTS=''

Uptime was about 4 days when I faced this issue. I noticed that the 5GHz AP "disappeared" but not the 2.4 GHz AP.

Here's what I see in the kernel log:

[401995.553122] ------------[ cut here ]------------
[401995.558118] WARNING: CPU: 0 PID: 9567 at backports-6.1.110-1/net/wireless/chan.c:475 0x81bb57d0 [cfg80211@46e704c3+0x45620]
[401995.569915] Modules linked in: ath10k_pci ath9k ath9k_common pppoe ppp_async nft_fib_inet nf_flow_table_ipv6 nf_flow_table_ipv4 nf_flow_table_inet ath9k_hw ath10k_core ath pppox ppp_generic nft_reject_ipv6 nft_reject_ipv4 nft_reject_inet nft_reject nft_redir nft_quota nft_objref nft_numgen nft_nat nft_masq nft_log nft_limit nft_hash nft_flow_offload nft_fib_ipv6 nft_fib_ipv4 nft_fib nft_ct nft_counter nft_chain_nat nf_tables nf_nat nf_flow_table nf_conntrack mac80211 lzo cfg80211 slhc nfnetlink nf_reject_ipv6 nf_reject_ipv4 nf_log_syslog nf_defrag_ipv6 nf_defrag_ipv4 lzo_rle lzo_decompress lzo_compress libcrc32c hwmon crc_ccitt compat ledtrig_usbport sha512_generic seqiv jitterentropy_rng drbg hmac cmac crypto_acompress fsl_mph_dr_of ehci_platform ehci_fsl ehci_hcd gpio_button_hotplug usbcore nls_base usb_common crc32c_generic [last unloaded: ath10k_pci]
[401995.648571] CPU: 0 PID: 9567 Comm: kworker/u2:0 Not tainted 5.15.167 #0
[401995.655511] Workqueue: events_unbound 0x81b80228 [cfg80211@46e704c3+0x45620]
[401995.663212] Stack : 80658d10 80668940 80720000 83333580 00000000 00000000 00000000 00000000
[401995.672024]         00000000 00000000 00000000 00000000 00000000 00000001 80d1dcc0 63fdd347
[401995.680872]         80d1dd58 00000000 00000000 80d1db48 00000038 80331144 00000000 ffffffea
[401995.689732]         000001f0 80d1db54 000001f0 8072a078 80668940 80d1dca0 00000000 81bb57d0
[401995.698531]         00000009 821d0000 80c09005 833335c0 00000000 8039cd80 00000000 808e0000
[401995.707359]         ...
[401995.710032] Call Trace:
[401995.710045] [<80331144>] 0x80331144
[401995.716363] [<81bb57d0>] 0x81bb57d0 [cfg80211@46e704c3+0x45620]
[401995.722762] [<8039cd80>] 0x8039cd80
[401995.726471] [<80066544>] 0x80066544
[401995.730190] [<8006654c>] 0x8006654c
[401995.733916] [<80084900>] 0x80084900
[401995.737613] [<81bb57d0>] 0x81bb57d0 [cfg80211@46e704c3+0x45620]
[401995.743851] [<800849e4>] 0x800849e4
[401995.747650] [<81bb57d0>] 0x81bb57d0 [cfg80211@46e704c3+0x45620]
[401995.753955] [<8064f698>] 0x8064f698
[401995.757676] [<8204d8ac>] 0x8204d8ac [mac80211@bfb2abfd+0x8d0c0]
[401995.764139] [<81b802c4>] 0x81b802c4 [cfg80211@46e704c3+0x45620]
[401995.770514] [<8009ab94>] 0x8009ab94
[401995.774245] [<8009cc44>] 0x8009cc44
[401995.777976] [<8009d400>] 0x8009d400
[401995.781772] [<8009d294>] 0x8009d294
[401995.785573] [<8009d294>] 0x8009d294
[401995.789319] [<800a48d0>] 0x800a48d0
[401995.793041] [<800a4790>] 0x800a4790
[401995.796907] [<800a4790>] 0x800a4790
[401995.800657] [<80061e18>] 0x80061e18
[401995.804468]
[401995.806099] ---[ end trace ecd659b65794fa7a ]---
[401995.811017] ------------[ cut here ]------------
[401995.815874] WARNING: CPU: 0 PID: 9567 at backports-6.1.110-1/net/wireless/nl80211.c:3823 0x81b968fc [cfg80211@46e704c3+0x45620]
[401995.827959] Modules linked in: ath10k_pci ath9k ath9k_common pppoe ppp_async nft_fib_inet nf_flow_table_ipv6 nf_flow_table_ipv4 nf_flow_table_inet ath9k_hw ath10k_core ath pppox ppp_generic nft_reject_ipv6 nft_reject_ipv4 nft_reject_inet nft_reject nft_redir nft_quota nft_objref nft_numgen nft_nat nft_masq nft_log nft_limit nft_hash nft_flow_offload nft_fib_ipv6 nft_fib_ipv4 nft_fib nft_ct nft_counter nft_chain_nat nf_tables nf_nat nf_flow_table nf_conntrack mac80211 lzo cfg80211 slhc nfnetlink nf_reject_ipv6 nf_reject_ipv4 nf_log_syslog nf_defrag_ipv6 nf_defrag_ipv4 lzo_rle lzo_decompress lzo_compress libcrc32c hwmon crc_ccitt compat ledtrig_usbport sha512_generic seqiv jitterentropy_rng drbg hmac cmac crypto_acompress fsl_mph_dr_of ehci_platform ehci_fsl ehci_hcd gpio_button_hotplug usbcore nls_base usb_common crc32c_generic [last unloaded: ath10k_pci]
[401995.906779] CPU: 0 PID: 9567 Comm: kworker/u2:0 Tainted: G        W         5.15.167 #0
[401995.915215] Workqueue: events_unbound 0x81b80228 [cfg80211@46e704c3+0x45620]
[401995.922741] Stack : 80658d10 80668940 80720000 83333580 00000000 00000000 00000000 00000000
[401995.931535]         00000000 00000000 00000000 00000000 00000000 00000001 80d1dc50 63fdd347
[401995.940299]         80d1dce8 00000000 00000000 80d1dad8 00000038 80331144 00000000 ffffffea
[401995.949059]         00000213 80d1dae4 00000213 8072a078 80668940 80d1dc30 00000000 81b968fc
[401995.957961]         00000009 00000cc0 00000000 81bc0000 00000000 8039cd80 00000000 808e0000
[401995.966742]         ...
[401995.969385] Call Trace:
[401995.969396] [<80331144>] 0x80331144
[401995.975810] [<81b968fc>] 0x81b968fc [cfg80211@46e704c3+0x45620]
[401995.982107] [<8039cd80>] 0x8039cd80
[401995.985831] [<80066544>] 0x80066544
[401995.989918] [<8006654c>] 0x8006654c
[401995.993632] [<80084900>] 0x80084900
[401995.997353] [<81b968fc>] 0x81b968fc [cfg80211@46e704c3+0x45620]
[401996.003896] [<800849e4>] 0x800849e4
[401996.007695] [<81b968fc>] 0x81b968fc [cfg80211@46e704c3+0x45620]
[401996.014069] [<80310bd8>] 0x80310bd8
[401996.017799] [<81bb4954>] 0x81bb4954 [cfg80211@46e704c3+0x45620]
[401996.024064] [<81bb5810>] 0x81bb5810 [cfg80211@46e704c3+0x45620]
[401996.030397] [<8064f698>] 0x8064f698
[401996.034145] [<8204d8ac>] 0x8204d8ac [mac80211@bfb2abfd+0x8d0c0]
[401996.040435] [<81b802c4>] 0x81b802c4 [cfg80211@46e704c3+0x45620]
[401996.046657] [<8009ab94>] 0x8009ab94
[401996.050373] [<8009cc44>] 0x8009cc44
[401996.054187] [<8009d400>] 0x8009d400
[401996.057925] [<8009d294>] 0x8009d294
[401996.061684] [<8009d294>] 0x8009d294
[401996.065411] [<800a48d0>] 0x800a48d0
[401996.069203] [<800a4790>] 0x800a4790
[401996.073038] [<800a4790>] 0x800a4790
[401996.076745] [<80061e18>] 0x80061e18
[401996.080541]
[401996.082174] ---[ end trace ecd659b65794fa7b ]---
[401996.094156] ------------[ cut here ]------------
[401996.099115] WARNING: CPU: 0 PID: 7441 at backports-6.1.110-1/net/wireless/reg.c:4281 0x81b80364 [cfg80211@46e704c3+0x45620]
[401996.110772] Modules linked in: ath10k_pci ath9k ath9k_common pppoe ppp_async nft_fib_inet nf_flow_table_ipv6 nf_flow_table_ipv4 nf_flow_table_inet ath9k_hw ath10k_core ath pppox ppp_generic nft_reject_ipv6 nft_reject_ipv4 nft_reject_inet nft_reject nft_redir nft_quota nft_objref nft_numgen nft_nat nft_masq nft_log nft_limit nft_hash nft_flow_offload nft_fib_ipv6 nft_fib_ipv4 nft_fib nft_ct nft_counter nft_chain_nat nf_tables nf_nat nf_flow_table nf_conntrack mac80211 lzo cfg80211 slhc nfnetlink nf_reject_ipv6 nf_reject_ipv4 nf_log_syslog nf_defrag_ipv6 nf_defrag_ipv4 lzo_rle lzo_decompress lzo_compress libcrc32c hwmon crc_ccitt compat ledtrig_usbport sha512_generic seqiv jitterentropy_rng drbg hmac cmac crypto_acompress fsl_mph_dr_of ehci_platform ehci_fsl ehci_hcd gpio_button_hotplug usbcore nls_base usb_common crc32c_generic [last unloaded: ath10k_pci]
[401996.189763] CPU: 0 PID: 7441 Comm: kworker/u2:2 Tainted: G        W         5.15.167 #0
[401996.198226] Workqueue: cfg80211 0x81b8033c [cfg80211@46e704c3+0x45620]
[401996.205266] Stack : 80658d10 80668940 80720000 8337c200 00000000 00000000 00000000 00000000
[401996.214266]         00000000 00000000 00000000 00000000 00000000 00000001 80f0dd48 925c177a
[401996.223070]         80f0dde0 00000000 00000000 80f0dbd0 00000038 80331144 00000000 ffffffea
[401996.231917]         00000239 80f0dbdc 00000239 8072a078 80668940 80f0dd28 00000000 81b80364
[401996.240711]         00000009 8197665c 80cd9d05 8337c240 00000000 8039cd80 00000000 808e0000
[401996.249475]         ...
[401996.252102] Call Trace:
[401996.252145] [<80331144>] 0x80331144
[401996.258713] [<81b80364>] 0x81b80364 [cfg80211@46e704c3+0x45620]
[401996.264982] [<8039cd80>] 0x8039cd80
[401996.268837] [<80066544>] 0x80066544
[401996.272601] [<8006654c>] 0x8006654c
[401996.276348] [<80084900>] 0x80084900
[401996.280230] [<81b80364>] 0x81b80364 [cfg80211@46e704c3+0x45620]
[401996.286604] [<800849e4>] 0x800849e4
[401996.290364] [<81b80364>] 0x81b80364 [cfg80211@46e704c3+0x45620]
[401996.296642] [<8009cc44>] 0x8009cc44
[401996.300409] [<8009d400>] 0x8009d400
[401996.304125] [<8009d294>] 0x8009d294
[401996.307847] [<8009d294>] 0x8009d294
[401996.311551] [<800a48d0>] 0x800a48d0
[401996.315412] [<800a4790>] 0x800a4790
[401996.319175] [<800a4790>] 0x800a4790
[401996.322880] [<80061e18>] 0x80061e18
[401996.326586]
[401996.328230] ---[ end trace ecd659b65794fa7c ]---
[401996.464414] br-lan: port 2(phy2-ap0) entered disabled state
[401996.471776] device phy2-ap0 left promiscuous mode
[401996.476906] br-lan: port 2(phy2-ap0) entered disabled state
[401997.464663] ath10k_pci 0000:00:00.0: 10.1 wmi init: vdevs: 16  peers: 127  tid: 256
[401997.482237] ath10k_pci 0000:00:00.0: wmi print 'P 128 V 8 T 410'
[401997.488826] ath10k_pci 0000:00:00.0: wmi print 'msdu-desc: 1424  sw-crypt: 0 ct-sta: 0'
[401997.497196] ath10k_pci 0000:00:00.0: wmi print 'alloc rem: 24984 iram: 38672'
[401997.566231] ath10k_pci 0000:00:00.0: pdev param 0 not supported by firmware
[401997.581391] ath10k_pci 0000:00:00.0: rts threshold -1
[401997.589782] br-lan: port 2(phy2-ap0) entered blocking state
[401997.595756] br-lan: port 2(phy2-ap0) entered disabled state
[401997.601975] device phy2-ap0 entered promiscuous mode

Happy to share more logging and/or configuration settings if helpful.

Thanks,
John

2

Can you share:

  • ubus call system board
  • /etc/config/wireless (redact keys, etc.)
  • /etc/config/network
3

Change ath10k deriver and girmware (not board files) from -ct to mainline (or vice versa)
And provide full ath10k init messages. Backt$ace without decode is just rando, numbers in kaslr world.

1 Like
4

I was also curious what config this might be.

uci show firewall.cfg80211
uci show network.cfg80211
uci show wireless.cfg80211
5

ubus call system board:

{
        "kernel": "5.15.167",
        "hostname": "TP_v4_Office",
        "system": "Qualcomm Atheros QCA956X ver 1 rev 0",
        "model": "TP-Link Archer C7 v4",
        "board_name": "tplink,archer-c7-v4",
        "rootfs_type": "squashfs",
        "release": {
                "distribution": "OpenWrt",
                "version": "23.05.5",
                "revision": "r24106-10cc5fcd00",
                "target": "ath79/generic",
                "description": "OpenWrt 23.05.5 r24106-10cc5fcd00"
        }
}

/etc/config/wireless

config wifi-device 'radio0'
        option type 'mac80211'
        option path 'pci0000:00/0000:00:00.0'
        option channel '100'
        option band '5g'
        option htmode 'VHT80'
        option country 'US'
        option cell_density '0'
        option log_level '0'

config wifi-device 'radio1'
        option type 'mac80211'
        option path 'platform/ahb/18100000.wmac'
        option channel '6'
        option band '2g'
        option htmode 'HT20'
        option country 'US'
        option cell_density '0'
        option log_level '0'

config wifi-iface 'wifinet2'
        option device 'radio0'
        option mode 'ap'
        option ssid 'Hoosier5G-W3'
        option encryption 'psk2+ccmp'
        option key 'XXXXXXXX'
        option ieee80211r '1'
        option mobility_domain '2222'
        option reassociation_deadline '20000'
        option ft_over_ds '1'
        option ft_psk_generate_local '1'
        option wpa_disable_eapol_key_retries '1'
        option network 'lan'

config wifi-iface 'wifinet3'
        option device 'radio1'
        option mode 'ap'
        option ssid 'Hoosier'
        option encryption 'psk2+ccmp'
        option key 'XXXXXXXX'
        option wpa_disable_eapol_key_retries '1'
        option network 'lan'

config wifi-iface 'wifinet4'
        option device 'radio1'
        option mode 'ap'
        option ssid 'PARTY_IN_THE_HIT'
        option encryption 'psk2+ccmp'
        option key 'XXXXXXXX'
        option wpa_disable_eapol_key_retries '1'
        option network 'PARTY_IOT'

config wifi-iface 'wifinet5'
        option device 'radio1'
        option mode 'ap'
        option ssid 'HIT'
        option encryption 'psk2+ccmp'
        option isolate '1'
        option key 'XXXXXXXX'
        option wpa_disable_eapol_key_retries '1'
        option network 'IOT'

config wifi-iface 'wifinet6'
        option device 'radio1'
        option mode 'ap'
        option ssid 'HWDS'
        option encryption 'psk2+ccmp'
        option wds '1'
        option key 'XXXXXXXX'
        option network 'lan'
        option disabled '1'

config wifi-iface 'wifinet7'
        option device 'radio1'
        option mode 'ap'
        option ssid 'HoosierGuest'
        option encryption 'psk2+ccmp'
        option isolate '1'
        option key 'XXXXXXXX'
        option ieee80211r '1'
        option mobility_domain 'a213'
        option reassociation_deadline '20000'
        option ft_over_ds '0'
        option ft_psk_generate_local '1'
        option wpa_disable_eapol_key_retries '1'
        option network 'GUEST'

/etc/config/network

config interface 'loopback'
        option device 'lo'
        option proto 'static'
        option ipaddr '127.0.0.1'
        option netmask '255.0.0.0'

config globals 'globals'

config interface 'lan'
        option device 'br-lan'
        option proto 'static'
        option ipaddr '192.168.1.14'
        option gateway '192.168.1.2'
        option netmask '255.255.255.0'
        option delegate '0'

config switch
        option name 'switch0'
        option reset '1'
        option enable_vlan '1'

config switch_vlan
        option device 'switch0'
        option vlan '1'
        option vid '1'
        option ports '0t 1 2t 3 4 5'

config switch_vlan
        option device 'switch0'
        option vlan '2'
        option ports '0t 2t'
        option vid '22'

config device
        option name 'br-lan'
        option type 'bridge'
        list ports 'eth0.1'
        option ipv6 '0'

config device
        option name 'eth0.22'
        option type '8021q'
        option ifname 'eth0'
        option vid '22'
        option ipv6 '0'

config interface 'GUEST'
        option proto 'dhcp'
        option device 'guest-bridge'
        option delegate '0'
        option hostname 'TP_v4_Office_GUEST'

config device
        option type 'bridge'
        option name 'guest-bridge'
        list ports 'eth0.22'
        option ipv6 '0'
        option macaddr '70:4F:57:67:70:F2'

config switch_vlan
        option device 'switch0'
        option vlan '3'
        option vid '33'
        option ports '0t 2t'

config device
        option name 'eth0.33'
        option type '8021q'
        option ifname 'eth0'
        option vid '33'
        option ipv6 '0'

config device
        option type 'bridge'
        option name 'iot-bridge'
        list ports 'eth0.33'
        option ipv6 '0'
        option macaddr '70:4F:57:67:70:F3'

config interface 'IOT'
        option proto 'dhcp'
        option device 'iot-bridge'
        option delegate '0'
        option hostname 'TP_v4_Office_IOT'

config device
        option name 'eth0.1'
        option type '8021q'
        option ifname 'eth0'
        option vid '1'
        option ipv6 '0'

config device
        option name 'eth0'
        option ipv6 '0'

config device
        option name 'wlan0'
        option ipv6 '0'

config device
        option name 'wlan1'
        option ipv6 '0'

config device
        option name 'wlan1-1'
        option ipv6 '0'

config device
        option name 'wlan1-2'
        option ipv6 '0'

config device
        option type '8021q'
        option ifname 'eth0'
        option vid '44'
        option name 'eth0.44'
        option ipv6 '0'

config device
        option type 'bridge'
        option name 'partyiot-bridge'
        list ports 'eth0.44'
        option macaddr '70:4F:57:67:70:F4'

config interface 'PARTY_IOT'
        option proto 'dhcp'
        option device 'partyiot-bridge'
        option hostname 'TP_v4_Office_PARTY_IOT'

config switch_vlan
        option device 'switch0'
        option vlan '4'
        option ports '0t 2t'
        option vid '44'
6 
root@TP_v4_Office:/etc# uci show firewall.cfg80211
uci: Entry not found
root@TP_v4_Office:/etc# uci show network.cfg80211
uci: Entry not found
root@TP_v4_Office:/etc# uci show wireless.cfg80211
uci: Entry not found
1 Like
7

girmware = firmware?

When you say "full ath10k init messages", do you mean the kernel log back to startup, or is there a configuration change I should make to get more logging?

1 Like
8

Yeah, big fingers.
More of a logread, but first check if changing drivers help. It is common occurence that one set works on one hardware while not on other.

9

Additional kernel log here. Note that it's not full due to message size limit. Apologies if there's a way to get it all in one message, I'm not aware of it.

[    0.000000] Linux version 5.15.167 (builder@buildhost) (mips-openwrt-linux-musl-gcc (OpenWrt GCC 12.3.0 r24106-10cc5fcd00) 12.3.0, GNU ld (GNU Binutils) 2.40.0) #0 Mon Sep 23 12:34:46 2024
[    0.000000] printk: bootconsole [early0] enabled
[    0.000000] CPU0 revision is: 00019750 (MIPS 74Kc)
[    0.000000] MIPS: machine is TP-Link Archer C7 v4
[    0.000000] SoC: Qualcomm Atheros QCA956X ver 1 rev 0
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
[    0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x0000000000000000-0x0000000007ffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000000000-0x0000000007ffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000007ffffff]
[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[    0.000000] pcpu-alloc: [0] 0
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 32480
[    0.000000] Kernel command line: console=ttyS0,115200n8 rootfstype=squashfs,jffs2
[    0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes, linear)
[    0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes, linear)
[    0.000000] Writing ErrCtl register=00000000
[    0.000000] Readback ErrCtl register=00000000
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] Memory: 120816K/131072K available (6100K kernel code, 599K rwdata, 784K rodata, 1212K init, 216K bss, 10256K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] NR_IRQS: 51
[    0.000000] CPU clock: 775.000 MHz
[    0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 4932285024 ns
[    0.000001] sched_clock: 32 bits at 387MHz, resolution 2ns, wraps every 5541893118ns
[    0.008292] Calibrating delay loop... 385.84 BogoMIPS (lpj=1929216)
[    0.074815] pid_max: default: 32768 minimum: 301
[    0.080508] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.088240] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.102605] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.113021] futex hash table entries: 256 (order: -1, 3072 bytes, linear)
[    0.120384] pinctrl core: initialized pinctrl subsystem
[    0.127539] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.134368] thermal_sys: Registered thermal governor 'step_wise'
[    0.147349] clocksource: Switched to clocksource MIPS
[    0.160347] NET: Registered PF_INET protocol family
[    0.165716] IP idents hash table entries: 2048 (order: 2, 16384 bytes, linear)
[    0.174263] tcp_listen_portaddr_hash hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.183234] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.191426] TCP established hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.199520] TCP bind hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.206967] TCP: Hash tables configured (established 1024 bind 1024)
[    0.213833] UDP hash table entries: 256 (order: 0, 4096 bytes, linear)
[    0.220794] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes, linear)
[    0.228530] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.234546] PCI: CLS 0 bytes, default 32
[    0.241934] workingset: timestamp_bits=14 max_order=15 bucket_order=1
[    0.253431] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.259656] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    0.271427] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[    0.282943] pinctrl-single 1804002c.pinmux: 544 pins, size 68
[    0.289773] gpio-export gpio-export: 2 gpio(s) exported
[    0.296312] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
[    0.305494] printk: console [ttyS0] disabled
[    0.310114] 18020000.uart: ttyS0 at MMIO 0x18020000 (irq = 9, base_baud = 1562500) is a 16550A
[    0.319238] printk: console [ttyS0] enabled
[    0.328308] printk: bootconsole [early0] disabled
[    0.356136] led_gpio@0 enforce active low on GPIO handle
[    0.368685] spi-nor spi0.0: w25q128 (16384 Kbytes)
[    0.373702] 5 fixed-partitions partitions found on MTD device spi0.0
[    0.380347] OF: Bad cell count for /ahb/spi@1f000000/flash@0/partitions
[    0.387217] OF: Bad cell count for /ahb/spi@1f000000/flash@0/partitions
[    0.394392] OF: Bad cell count for /ahb/spi@1f000000/flash@0/partitions
[    0.401306] OF: Bad cell count for /ahb/spi@1f000000/flash@0/partitions
[    0.408606] Creating 5 MTD partitions on "spi0.0":
[    0.413606] 0x000000000000-0x000000020000 : "factory-uboot"
[    0.422760] 0x000000020000-0x000000040000 : "u-boot"
[    0.428945] 0x000000040000-0x000000f00000 : "firmware"
[    0.436846] 2 uimage-fw partitions found on MTD device firmware
[    0.443033] Creating 2 MTD partitions on "firmware":
[    0.448181] 0x000000000000-0x00000023ad64 : "kernel"
[    0.453307] mtd: partition "kernel" doesn't end on an erase/write block -- force read-only
[    0.463660] 0x00000023ad64-0x000000ec0000 : "rootfs"
[    0.468857] mtd: partition "rootfs" doesn't start on an erase/write block boundary -- force read-only
[    0.479341] mtd: setting mtd4 (rootfs) as root device
[    0.485427] 1 squashfs-split partitions found on MTD device rootfs
[    0.491878] 0x000000620000-0x000000ec0000 : "rootfs_data"
[    0.498555] 0x000000f00000-0x000000ff0000 : "info"
[    0.505974] 0x000000ff0000-0x000001000000 : "art"
[    1.241407] switch0: Atheros AR8337 rev. 2 switch registered on mdio.0
[    1.898987] ag71xx 19000000.eth: connected to PHY at mdio.0:00 [uid=004dd036, driver=Atheros AR8216/AR8236/AR8316]
[    1.910315] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode: sgmii
[    1.917244] i2c_dev: i2c /dev entries driver
[    1.933399] NET: Registered PF_INET6 protocol family
[    1.944708] Segment Routing with IPv6
[    1.948629] In-situ OAM (IOAM) with IPv6
[    1.952815] NET: Registered PF_PACKET protocol family
[    1.958180] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[    1.971868] 8021q: 802.1Q VLAN Support v1.8
[    1.977488] PCI host bridge to bus 0000:00
[    1.981737] pci_bus 0000:00: root bus resource [mem 0x12000000-0x13ffffff]
[    1.988876] pci_bus 0000:00: root bus resource [io  0x0000]
[    1.994635] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[    2.002874] pci 0000:00:00.0: [168c:003c] type 00 class 0x028000
[    2.009131] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit]
[    2.016190] pci 0000:00:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
[    2.023203] pci 0000:00:00.0: supports D1 D2
[    2.028666] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
[    2.035534] pci 0000:00:00.0: BAR 0: assigned [mem 0x12000000-0x121fffff 64bit]
[    2.043155] pci 0000:00:00.0: BAR 6: assigned [mem 0x12200000-0x1220ffff pref]
[    2.053887] clk: Disabling unused clocks
[    2.066893] VFS: Mounted root (squashfs filesystem) readonly on device 31:4.
[    2.080752] Freeing unused kernel image (initmem) memory: 1212K
[    2.086877] This architecture does not have kernel memory protection.
[    2.093560] Run /sbin/init as init process
[    2.097798]   with arguments:
[    2.097803]     /sbin/init
[    2.097808]   with environment:
[    2.097812]     HOME=/
[    2.097816]     TERM=linux
[    2.744889] init: Console is alive
[    2.748967] init: - watchdog -
[    4.228479] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[    4.311890] usbcore: registered new interface driver usbfs
[    4.317672] usbcore: registered new interface driver hub
[    4.323280] usbcore: registered new device driver usb
[    4.335609] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    4.345678] fsl-ehci: Freescale EHCI Host controller driver
[    4.353690] ehci-platform: EHCI generic platform driver
[    4.359566] ehci-platform 1b000000.usb: EHCI Host Controller
[    4.365468] ehci-platform 1b000000.usb: new USB bus registered, assigned bus number 1
[    4.373764] ehci-platform 1b000000.usb: irq 13, io mem 0x1b000000
[    4.407365] ehci-platform 1b000000.usb: USB 2.0 started, EHCI 1.00
[    4.414671] hub 1-0:1.0: USB hub found
[    4.419331] hub 1-0:1.0: 1 port detected
[    4.424334] ehci-platform 1b400000.usb: EHCI Host Controller
[    4.430262] ehci-platform 1b400000.usb: new USB bus registered, assigned bus number 2
[    4.438504] ehci-platform 1b400000.usb: irq 14, io mem 0x1b400000
[    4.467368] ehci-platform 1b400000.usb: USB 2.0 started, EHCI 1.00
[    4.474654] hub 2-0:1.0: USB hub found
[    4.479396] hub 2-0:1.0: 1 port detected
[    4.486856] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[    4.504855] init: - preinit -
[    6.202116] random: jshn: uninitialized urandom read (4 bytes read)
[    6.641053] random: jshn: uninitialized urandom read (4 bytes read)
[    6.909496] random: jshn: uninitialized urandom read (4 bytes read)
[    7.345360] random: jshn: uninitialized urandom read (4 bytes read)
[    8.362967] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[    8.369846] eth0: link up (1000Mbps/Full duplex)
[    8.407466] IPv6: ADDRCONF(NETDEV_CHANGE): eth0.1: link becomes ready
[    8.441657] random: procd: uninitialized urandom read (4 bytes read)
[   10.736941] jffs2: notice: (462) jffs2_build_xattr_subsystem: complete building xattr subsystem, 17 of xdatum (12 unchecked, 5 orphan) and 21 of xref (5 dead, 0 orphan) found.
[   10.755543] mount_root: switching to jffs2 overlay
[   10.766123] overlayfs: upper fs does not support tmpfile.
[   10.779139] urandom-seed: Seeding with /etc/urandom.seed
[   10.867494] eth0: link down
[   10.890722] procd: - early -
[   10.894010] procd: - watchdog -
[   11.655565] procd: - watchdog -
[   11.660428] procd: - ubus -
[   11.753891] random: ubusd: uninitialized urandom read (4 bytes read)
[   11.763288] random: ubusd: uninitialized urandom read (4 bytes read)
[   11.770405] random: ubusd: uninitialized urandom read (4 bytes read)
[   11.780651] procd: - init -
[   12.923020] random: jshn: uninitialized urandom read (4 bytes read)
[   12.974408] random: ubusd: uninitialized urandom read (4 bytes read)
[   13.033526] kmodloader: loading kernel modules from /etc/modules.d/*
[   13.600258] Loading modules backported from Linux version v6.1.110-0-g5f55cad62cc9d
[   13.608229] Backport generated by backports.git v6.1.110-1-0-g965f73fc
[   14.285050] PPP generic driver version 2.4.2
[   14.298324] NET: Registered PF_PPPOX protocol family
[   14.362796] ath10k 5.15 driver, optimized for CT firmware, probing pci device: 0x3c.
[   14.388578] ath10k_pci 0000:00:00.0: enabling device (0000 -> 0002)
[   14.395214] ath10k_pci 0000:00:00.0: pci irq legacy oper_irq_mode 1 irq_mode 0 reset_mode 0
[   15.254629] urngd: v1.0.2 started.
[   16.937735] random: crng init done
[   16.941266] random: 24 urandom warning(s) missed due to ratelimiting
[   19.293633] ath10k_pci 0000:00:00.0: qca988x hw2.0 target 0x4100016c chip_id 0x043202ff sub 0000:0000
[   19.303230] ath10k_pci 0000:00:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 0
[   19.315178] ath10k_pci 0000:00:00.0: firmware ver 10.1-ct-8x-__fW-022-ecad3248 api 2 features wmi-10.x,has-wmi-mgmt-tx,mfp,txstatus-noack,wmi-10.x-CT,ratemask-CT,txrate-CT,get-temp-CT,tx-rc-CT,cust-stats-CT,retry-gt2-CT,txrate2-CT,beacon-cb-CT,wmi-block-ack-CT crc32 3e4cf97f
[   19.437422] ath10k_pci 0000:00:00.0: Loading BDF type 0
[   20.347996] ath10k_pci 0000:00:00.0: board_file api 1 bmi_id N/A crc32 bebc7c08
[   21.364365] ath10k_pci 0000:00:00.0: 10.1 wmi init: vdevs: 16  peers: 127  tid: 256
[   21.381950] ath10k_pci 0000:00:00.0: wmi print 'P 128 V 8 T 410'
[   21.388196] ath10k_pci 0000:00:00.0: wmi print 'msdu-desc: 1424  sw-crypt: 0 ct-sta: 0'
[   21.396713] ath10k_pci 0000:00:00.0: wmi print 'alloc rem: 24984 iram: 38672'
[   21.450674] ath10k_pci 0000:00:00.0: htt-ver 2.1 wmi-op 2 htt-op 2 cal file max-sta 128 raw 0 hwcrypto 1
[   21.464902] ath10k_pci 0000:00:00.0: NOTE:  Firmware DBGLOG output disabled in debug_mask: 0x10000000
[   21.601375] ath: EEPROM regdomain: 0x0
[   21.601395] ath: EEPROM indicates default country code should be used
[   21.601400] ath: doing EEPROM country->regdmn map search
[   21.601414] ath: country maps to regdmn code: 0x3a
[   21.601420] ath: Country alpha2 being used: US
[   21.601427] ath: Regpair used: 0x3a
[   21.744390] ath: EEPROM regdomain: 0x0
[   21.744412] ath: EEPROM indicates default country code should be used
[   21.744417] ath: doing EEPROM country->regdmn map search
[   21.744431] ath: country maps to regdmn code: 0x3a
[   21.744438] ath: Country alpha2 being used: US
[   21.744444] ath: Regpair used: 0x3a
[   21.756084] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
[   21.758144] ieee80211 phy1: Atheros AR9561 Rev:0 mem=0x18bfdcc6, irq=2
[   21.770961] kmodloader: done loading kernel modules from /etc/modules.d/*
[   41.231835] Atheros AR8216/AR8236/AR8316 mdio.0:00: Port 2 is up
[   41.253075] eth0: link up (1000Mbps/Full duplex)
[   41.259088] br-lan: port 1(eth0.1) entered blocking state
[   41.264693] br-lan: port 1(eth0.1) entered disabled state
[   41.270586] device eth0.1 entered promiscuous mode
[   41.275551] device eth0 entered promiscuous mode
[   41.307677] br-lan: port 1(eth0.1) entered blocking state
[   41.313283] br-lan: port 1(eth0.1) entered forwarding state
[   41.411048] guest-bridge: port 1(eth0.22) entered blocking state
[   41.417274] guest-bridge: port 1(eth0.22) entered disabled state
[   41.423822] device eth0.22 entered promiscuous mode
[   41.495790] guest-bridge: port 1(eth0.22) entered blocking state
[   41.502062] guest-bridge: port 1(eth0.22) entered forwarding state
[   41.638139] iot-bridge: port 1(eth0.33) entered blocking state
[   41.644184] iot-bridge: port 1(eth0.33) entered disabled state
[   41.684589] device eth0.33 entered promiscuous mode
[   41.718832] iot-bridge: port 1(eth0.33) entered blocking state
[   41.724879] iot-bridge: port 1(eth0.33) entered forwarding state
[   41.866723] partyiot-bridge: port 1(eth0.44) entered blocking state
[   41.873280] partyiot-bridge: port 1(eth0.44) entered disabled state
[   41.880041] device eth0.44 entered promiscuous mode
[   41.997515] partyiot-bridge: port 1(eth0.44) entered blocking state
[   42.004019] partyiot-bridge: port 1(eth0.44) entered forwarding state
[   45.181040] ath10k 5.15 driver, optimized for CT firmware, probing pci device: 0x3c.
[   45.268639] ath10k_pci 0000:00:00.0: pci irq legacy oper_irq_mode 1 irq_mode 0 reset_mode 0
[   51.477000] br-lan: port 2(phy1-ap0) entered blocking state
[   51.482820] br-lan: port 2(phy1-ap0) entered disabled state
[   51.488883] device phy1-ap0 entered promiscuous mode
[   51.669940] IPv6: ADDRCONF(NETDEV_CHANGE): phy1-ap0: link becomes ready
[   51.676970] br-lan: port 2(phy1-ap0) entered blocking state
[   51.682785] br-lan: port 2(phy1-ap0) entered forwarding state
[   52.082562] partyiot-bridge: port 2(phy1-ap1) entered blocking state
[   52.089236] partyiot-bridge: port 2(phy1-ap1) entered disabled state
[   52.096067] device phy1-ap1 entered promiscuous mode
[   52.127743] partyiot-bridge: port 2(phy1-ap1) entered blocking state
[   52.134330] partyiot-bridge: port 2(phy1-ap1) entered forwarding state
[   52.381290] IPv6: ADDRCONF(NETDEV_CHANGE): phy1-ap1: link becomes ready
[   52.411977] iot-bridge: port 2(phy1-ap2) entered blocking state
[   52.418189] iot-bridge: port 2(phy1-ap2) entered disabled state
[   52.424579] device phy1-ap2 entered promiscuous mode
[   52.457720] iot-bridge: port 2(phy1-ap2) entered blocking state
[   52.463860] iot-bridge: port 2(phy1-ap2) entered forwarding state
[   52.477497] iot-bridge: port 2(phy1-ap2) entered disabled state
[   52.710399] IPv6: ADDRCONF(NETDEV_CHANGE): phy1-ap2: link becomes ready
[   52.717588] iot-bridge: port 2(phy1-ap2) entered blocking state
[   52.723733] iot-bridge: port 2(phy1-ap2) entered forwarding state
[   52.767727] guest-bridge: port 2(phy1-ap3) entered blocking state
[   52.774045] guest-bridge: port 2(phy1-ap3) entered disabled state
[   52.802416] device phy1-ap3 entered promiscuous mode
[   52.808788] guest-bridge: port 2(phy1-ap3) entered blocking state
[   52.815110] guest-bridge: port 2(phy1-ap3) entered forwarding state
[   53.042819] IPv6: ADDRCONF(NETDEV_CHANGE): phy1-ap3: link becomes ready
10

Part two of the kernel log before the error messages I first shared

[   54.343702] ath10k_pci 0000:00:00.0: qca988x hw2.0 target 0x4100016c chip_id 0x043202ff sub 0000:0000
[   54.353381] ath10k_pci 0000:00:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 0
[   54.365528] ath10k_pci 0000:00:00.0: firmware ver 10.1-ct-8x-__fW-022-ecad3248 api 2 features wmi-10.x,has-wmi-mgmt-tx,mfp,txstatus-noack,wmi-10.x-CT,ratemask-CT,txrate-CT,get-temp-CT,tx-rc-CT,cust-stats-CT,retry-gt2-CT,txrate2-CT,beacon-cb-CT,wmi-block-ack-CT crc32 3e4cf97f
[   54.487888] ath10k_pci 0000:00:00.0: Loading BDF type 0
[   56.259615] ath10k_pci 0000:00:00.0: board_file api 1 bmi_id N/A crc32 bebc7c08
[   57.818474] ath10k_pci 0000:00:00.0: 10.1 wmi init: vdevs: 16  peers: 127  tid: 256
[   57.835975] ath10k_pci 0000:00:00.0: wmi print 'P 128 V 8 T 410'
[   57.842602] ath10k_pci 0000:00:00.0: wmi print 'msdu-desc: 1424  sw-crypt: 0 ct-sta: 0'
[   57.850959] ath10k_pci 0000:00:00.0: wmi print 'alloc rem: 24984 iram: 38672'
[   57.923425] ath10k_pci 0000:00:00.0: htt-ver 2.1 wmi-op 2 htt-op 2 cal file max-sta 128 raw 0 hwcrypto 1
[   58.081366] ath: EEPROM regdomain: 0x0
[   58.085264] ath: EEPROM indicates default country code should be used
[   58.091975] ath: doing EEPROM country->regdmn map search
[   58.097487] ath: country maps to regdmn code: 0x3a
[   58.102461] ath: Country alpha2 being used: US
[   58.107051] ath: Regpair used: 0x3a
[   63.670236] guest-bridge: port 2(phy1-ap3) entered disabled state
[   63.679838] device phy1-ap3 left promiscuous mode
[   63.684719] guest-bridge: port 2(phy1-ap3) entered disabled state
[   63.783359] iot-bridge: port 2(phy1-ap2) entered disabled state
[   63.798017] device phy1-ap2 left promiscuous mode
[   63.802902] iot-bridge: port 2(phy1-ap2) entered disabled state
[   63.953911] partyiot-bridge: port 2(phy1-ap1) entered disabled state
[   63.987730] device phy1-ap1 left promiscuous mode
[   63.992651] partyiot-bridge: port 2(phy1-ap1) entered disabled state
[   64.217788] br-lan: port 2(phy1-ap0) entered disabled state
[   64.224015] device phy1-ap0 left promiscuous mode
[   64.229033] br-lan: port 2(phy1-ap0) entered disabled state
[   71.608133] ath10k_pci 0000:00:00.0: 10.1 wmi init: vdevs: 16  peers: 127  tid: 256
[   71.625564] ath10k_pci 0000:00:00.0: wmi print 'P 128 V 8 T 410'
[   71.631841] ath10k_pci 0000:00:00.0: wmi print 'msdu-desc: 1424  sw-crypt: 0 ct-sta: 0'
[   71.640731] ath10k_pci 0000:00:00.0: wmi print 'alloc rem: 24984 iram: 38672'
[   71.712400] ath10k_pci 0000:00:00.0: pdev param 0 not supported by firmware
[   71.727434] ath10k_pci 0000:00:00.0: rts threshold -1
[   71.736189] br-lan: port 2(phy2-ap0) entered blocking state
[   71.742079] br-lan: port 2(phy2-ap0) entered disabled state
[   71.748142] device phy2-ap0 entered promiscuous mode
[   72.283437] br-lan: port 3(phy1-ap0) entered blocking state
[   72.289266] br-lan: port 3(phy1-ap0) entered disabled state
[   72.295383] device phy1-ap0 entered promiscuous mode
[   72.300805] br-lan: port 3(phy1-ap0) entered blocking state
[   72.306584] br-lan: port 3(phy1-ap0) entered forwarding state
[   72.448558] IPv6: ADDRCONF(NETDEV_CHANGE): phy1-ap0: link becomes ready
[   72.478008] partyiot-bridge: port 2(phy1-ap1) entered blocking state
[   72.484612] partyiot-bridge: port 2(phy1-ap1) entered disabled state
[   72.491509] device phy1-ap1 entered promiscuous mode
[   72.512145] partyiot-bridge: port 2(phy1-ap1) entered blocking state
[   72.518778] partyiot-bridge: port 2(phy1-ap1) entered forwarding state
[   72.737406] IPv6: ADDRCONF(NETDEV_CHANGE): phy1-ap1: link becomes ready
[   72.780313] iot-bridge: port 2(phy1-ap2) entered blocking state
[   72.786528] iot-bridge: port 2(phy1-ap2) entered disabled state
[   72.817472] device phy1-ap2 entered promiscuous mode
[   72.828013] iot-bridge: port 2(phy1-ap2) entered blocking state
[   72.834151] iot-bridge: port 2(phy1-ap2) entered forwarding state
[   73.144154] IPv6: ADDRCONF(NETDEV_CHANGE): phy1-ap2: link becomes ready
[   73.193545] guest-bridge: port 2(phy1-ap3) entered blocking state
[   73.200059] guest-bridge: port 2(phy1-ap3) entered disabled state
[   73.234021] device phy1-ap3 entered promiscuous mode
[   73.252391] guest-bridge: port 2(phy1-ap3) entered blocking state
[   73.258755] guest-bridge: port 2(phy1-ap3) entered forwarding state
[   73.531794] IPv6: ADDRCONF(NETDEV_CHANGE): phy1-ap3: link becomes ready
[  136.178191] ath10k_pci 0000:00:00.0: mac flush null vif, drop 0 queues 0xffff
[  136.250227] IPv6: ADDRCONF(NETDEV_CHANGE): phy2-ap0: link becomes ready
[  136.257281] br-lan: port 2(phy2-ap0) entered blocking state
[  136.263117] br-lan: port 2(phy2-ap0) entered forwarding state
[ 1947.646741] ath10k_pci 0000:00:00.0: mac flush vdev 0 drop 0 queues 0x1 ar->paused: 0x0  arvif->paused: 0x0
[ 2412.154232] Rekeying PTK for STA fa:4e:f2:88:f0:0d but driver can't safely do that.
[ 2412.154265] ath10k_pci 0000:00:00.0: mac flush vdev 0 drop 0 queues 0x1 ar->paused: 0x0  arvif->paused: 0x0
[ 2412.207908] ath10k_pci 0000:00:00.0: mac flush vdev 0 drop 0 queues 0x1 ar->paused: 0x0  arvif->paused: 0x0
[ 2852.231134] ath10k_pci 0000:00:00.0: mac flush vdev 0 drop 0 queues 0x1 ar->paused: 0x0  arvif->paused: 0x0
[ 5293.289890] ath10k_pci 0000:00:00.0: mac flush vdev 0 drop 0 queues 0x1 ar->paused: 0x0  arvif->paused: 0x0
[ 7903.837572] ath10k_pci 0000:00:00.0: mac flush vdev 0 drop 0 queues 0x1 ar->paused: 0x0  arvif->paused: 0x0
[ 8876.093717] ath10k_pci 0000:00:00.0: mac flush vdev 0 drop 0 queues 0x1 ar->paused: 0x0  arvif->paused: 0x0
[ 9283.116716] ath10k_pci 0000:00:00.0: mac flush vdev 0 drop 0 queues 0x1 ar->paused: 0x0  arvif->paused: 0x0
[11173.055745] Rekeying PTK for STA fa:4e:f2:88:f0:0d but driver can't safely do that.
[11173.055777] ath10k_pci 0000:00:00.0: mac flush vdev 0 drop 0 queues 0x1 ar->paused: 0x0  arvif->paused: 0x0
[11173.112703] ath10k_pci 0000:00:00.0: mac flush vdev 0 drop 0 queues 0x1 ar->paused: 0x0  arvif->paused: 0x0
[11298.212931] ath10k_pci 0000:00:00.0: mac flush vdev 0 drop 0 queues 0x1 ar->paused: 0x0  arvif->paused: 0x0
[11332.948779] ath10k_pci 0000:00:00.0: mac flush vdev 0 drop 0 queues 0x1 ar->paused: 0x0  arvif->paused: 0x0
[11381.482936] ath10k_pci 0000:00:00.0: mac flush vdev 0 drop 0 queues 0x1 ar->paused: 0x0  arvif->paused: 0x0
[21118.422204] ath10k_pci 0000:00:00.0: mac flush vdev 0 drop 0 queues 0x1 ar->paused: 0x0  arvif->paused: 0x0
[24634.061367] ath10k_pci 0000:00:00.0: mac flush vdev 0 drop 0 queues 0x1 ar->paused: 0x0  arvif->paused: 0x0
[60849.349660] ath10k_pci 0000:00:00.0: mac flush vdev 0 drop 0 queues 0x1 ar->paused: 0x0  arvif->paused: 0x0
[72504.186782] ath10k_pci 0000:00:00.0: mac flush vdev 0 drop 0 queues 0x1 ar->paused: 0x0  arvif->paused: 0x0
[77121.861958] ath10k_pci 0000:00:00.0: mac flush vdev 0 drop 0 queues 0x1 ar->paused: 0x0  arvif->paused: 0x0
[82953.719074] ath10k_pci 0000:00:00.0: mac flush vdev 0 drop 0 queues 0x1 ar->paused: 0x0  arvif->paused: 0x0
[84630.083650] Rekeying PTK for STA 9a:49:d4:e3:57:eb but driver can't safely do that.
[84630.083684] ath10k_pci 0000:00:00.0: mac flush vdev 0 drop 0 queues 0x1 ar->paused: 0x0  arvif->paused: 0x0
[84630.150420] ath10k_pci 0000:00:00.0: mac flush vdev 0 drop 0 queues 0x1 ar->paused: 0x0  arvif->paused: 0x0
[84952.169234] ath10k_pci 0000:00:00.0: mac flush vdev 0 drop 0 queues 0x1 ar->paused: 0x0  arvif->paused: 0x0
[86070.657459] ath10k_pci 0000:00:00.0: mac flush vdev 0 drop 0 queues 0x1 ar->paused: 0x0  arvif->paused: 0x0
[86503.341630] ath10k_pci 0000:00:00.0: mac flush vdev 0 drop 0 queues 0x1 ar->paused: 0x0  arvif->paused: 0x0
[87029.362947] ath10k_pci 0000:00:00.0: mac flush vdev 0 drop 0 queues 0x1 ar->paused: 0x0  arvif->paused: 0x0
[88151.785139] ath10k_pci 0000:00:00.0: mac flush vdev 0 drop 0 queues 0x1 ar->paused: 0x0  arvif->paused: 0x0
[88454.748552] ath10k_pci 0000:00:00.0: mac flush vdev 0 drop 0 queues 0x1 ar->paused: 0x0  arvif->paused: 0x0
[90506.721790] ath10k_pci 0000:00:00.0: mac flush vdev 0 drop 0 queues 0x1 ar->paused: 0x0  arvif->paused: 0x0
[96170.404374] ath10k_pci 0000:00:00.0: mac flush vdev 0 drop 0 queues 0x1 ar->paused: 0x0  arvif->paused: 0x0
[97900.994153] ath10k_pci 0000:00:00.0: mac flush vdev 0 drop 0 queues 0x1 ar->paused: 0x0  arvif->paused: 0x0
[98244.017971] ath10k_pci 0000:00:00.0: mac flush vdev 0 drop 0 queues 0x1 ar->paused: 0x0  arvif->paused: 0x0
[99877.301685] ath10k_pci 0000:00:00.0: mac flush vdev 0 drop 0 queues 0x1 ar->paused: 0x0  arvif->paused: 0x0
[106726.730247] ath10k_pci 0000:00:00.0: mac flush vdev 0 drop 0 queues 0x1 ar->paused: 0x0  arvif->paused: 0x0
[107090.754544] ath10k_pci 0000:00:00.0: mac flush vdev 0 drop 0 queues 0x1 ar->paused: 0x0  arvif->paused: 0x0
[110377.365917] Rekeying PTK for STA da:81:98:35:32:b1 but driver can't safely do that.
[110377.365951] ath10k_pci 0000:00:00.0: mac flush vdev 0 drop 0 queues 0x1 ar->paused: 0x0  arvif->paused: 0x0
[110377.435971] ath10k_pci 0000:00:00.0: mac flush vdev 0 drop 0 queues 0x1 ar->paused: 0x0  arvif->paused: 0x0
[110593.432221] Rekeying PTK for STA da:81:98:35:32:b1 but driver can't safely do that.
[110593.432256] ath10k_pci 0000:00:00.0: mac flush vdev 0 drop 0 queues 0x1 ar->paused: 0x0  arvif->paused: 0x0
[110593.500800] ath10k_pci 0000:00:00.0: mac flush vdev 0 drop 0 queues 0x1 ar->paused: 0x0  arvif->paused: 0x0
[111416.485761] Rekeying PTK for STA da:81:98:35:32:b1 but driver can't safely do that.
[111416.485794] ath10k_pci 0000:00:00.0: mac flush vdev 0 drop 0 queues 0x1 ar->paused: 0x0  arvif->paused: 0x0
[111416.533890] ath10k_pci 0000:00:00.0: mac flush vdev 0 drop 0 queues 0x1 ar->paused: 0x0  arvif->paused: 0x0
[119509.810659] Rekeying PTK for STA da:81:98:35:32:b1 but driver can't safely do that.
[119509.810692] ath10k_pci 0000:00:00.0: mac flush vdev 0 drop 0 queues 0x1 ar->paused: 0x0  arvif->paused: 0x0
[119509.877695] ath10k_pci 0000:00:00.0: mac flush vdev 0 drop 0 queues 0x1 ar->paused: 0x0  arvif->paused: 0x0
[119536.790665] Rekeying PTK for STA da:81:98:35:32:b1 but driver can't safely do that.
[119536.790699] ath10k_pci 0000:00:00.0: mac flush vdev 0 drop 0 queues 0x1 ar->paused: 0x0  arvif->paused: 0x0
[119537.121798] ath10k_pci 0000:00:00.0: mac flush vdev 0 drop 0 queues 0x1 ar->paused: 0x0  arvif->paused: 0x0
[145848.768647] ath10k_pci 0000:00:00.0: mac flush vdev 0 drop 0 queues 0x1 ar->paused: 0x0  arvif->paused: 0x0
[146881.227341] ath10k_pci 0000:00:00.0: mac flush vdev 0 drop 0 queues 0x1 ar->paused: 0x0  arvif->paused: 0x0
[147412.802831] ath10k_pci 0000:00:00.0: mac flush vdev 0 drop 0 queues 0x1 ar->paused: 0x0  arvif->paused: 0x0
[149647.809777] ath10k_pci 0000:00:00.0: mac flush vdev 0 drop 0 queues 0x1 ar->paused: 0x0  arvif->paused: 0x0
[152100.000498] ath10k_pci 0000:00:00.0: mac flush vdev 0 drop 0 queues 0x1 ar->paused: 0x0  arvif->paused: 0x0
[153573.814321] ath10k_pci 0000:00:00.0: mac flush vdev 0 drop 0 queues 0x1 ar->paused: 0x0  arvif->paused: 0x0
[153918.868151] ath10k_pci 0000:00:00.0: mac flush vdev 0 drop 0 queues 0x1 ar->paused: 0x0  arvif->paused: 0x0
[160071.740669] ath10k_pci 0000:00:00.0: mac flush vdev 0 drop 0 queues 0x1 ar->paused: 0x0  arvif->paused: 0x0
[160149.484354] Rekeying PTK for STA fa:4e:f2:88:f0:0d but driver can't safely do that.
[160149.484386] ath10k_pci 0000:00:00.0: mac flush vdev 0 drop 0 queues 0x1 ar->paused: 0x0  arvif->paused: 0x0
[160149.540261] ath10k_pci 0000:00:00.0: mac flush vdev 0 drop 0 queues 0x1 ar->paused: 0x0  arvif->paused: 0x0
[160319.216883] Rekeying PTK for STA fa:4e:f2:88:f0:0d but driver can't safely do that.
[160319.216916] ath10k_pci 0000:00:00.0: mac flush vdev 0 drop 0 queues 0x1 ar->paused: 0x0  arvif->paused: 0x0
[160319.274191] ath10k_pci 0000:00:00.0: mac flush vdev 0 drop 0 queues 0x1 ar->paused: 0x0  arvif->paused: 0x0
[162148.197351] Rekeying PTK for STA fa:4e:f2:88:f0:0d but driver can't safely do that.
[162148.197385] ath10k_pci 0000:00:00.0: mac flush vdev 0 drop 0 queues 0x1 ar->paused: 0x0  arvif->paused: 0x0
[162148.252198] ath10k_pci 0000:00:00.0: mac flush vdev 0 drop 0 queues 0x1 ar->paused: 0x0  arvif->paused: 0x0
[162826.268245] ath10k_pci 0000:00:00.0: mac flush vdev 0 drop 0 queues 0x1 ar->paused: 0x0  arvif->paused: 0x0
[163147.291766] ath10k_pci 0000:00:00.0: mac flush vdev 0 drop 0 queues 0x1 ar->paused: 0x0  arvif->paused: 0x0
[164034.476965] Rekeying PTK for STA fa:4e:f2:88:f0:0d but driver can't safely do that.
[164034.476999] ath10k_pci 0000:00:00.0: mac flush vdev 0 drop 0 queues 0x1 ar->paused: 0x0  arvif->paused: 0x0
[164034.531905] ath10k_pci 0000:00:00.0: mac flush vdev 0 drop 0 queues 0x1 ar->paused: 0x0  arvif->paused: 0x0
[164747.605345] ath10k_pci 0000:00:00.0: mac flush vdev 0 drop 0 queues 0x1 ar->paused: 0x0  arvif->paused: 0x0
[164765.247646] ath10k_pci 0000:00:00.0: mac flush vdev 0 drop 0 queues 0x1 ar->paused: 0x0  arvif->paused: 0x0
[165781.345615] ath10k_pci 0000:00:00.0: mac flush vdev 0 drop 0 queues 0x1 ar->paused: 0x0  arvif->paused: 0x0
[167995.862683] ath10k_pci 0000:00:00.0: mac flush vdev 0 drop 0 queues 0x1 ar->paused: 0x0  arvif->paused: 0x0
[167997.645129] ath10k_pci 0000:00:00.0: mac flush vdev 0 drop 0 queues 0x1 ar->paused: 0x0  arvif->paused: 0x0
[176289.460160] ath10k_pci 0000:00:00.0: mac flush vdev 0 drop 0 queues 0x1 ar->paused: 0x0  arvif->paused: 0x0
[178549.035553] ath10k_pci 0000:00:00.0: mac flush vdev 0 drop 0 queues 0x1 ar->paused: 0x0  arvif->paused: 0x0
[179427.053961] ath10k_pci 0000:00:00.0: mac flush vdev 0 drop 0 queues 0x1 ar->paused: 0x0  arvif->paused: 0x0
[180789.475629] ath10k_pci 0000:00:00.0: mac flush vdev 0 drop 0 queues 0x1 ar->paused: 0x0  arvif->paused: 0x0
[181665.493646] ath10k_pci 0000:00:00.0: mac flush vdev 0 drop 0 queues 0x1 ar->paused: 0x0  arvif->paused: 0x0
[183634.356146] ath10k_pci 0000:00:00.0: mac flush vdev 0 drop 0 queues 0x1 ar->paused: 0x0  arvif->paused: 0x0
[184017.405230] Rekeying PTK for STA da:81:98:35:32:b1 but driver can't safely do that.
[184017.405263] ath10k_pci 0000:00:00.0: mac flush vdev 0 drop 0 queues 0x1 ar->paused: 0x0  arvif->paused: 0x0
[184017.471766] ath10k_pci 0000:00:00.0: mac flush vdev 0 drop 0 queues 0x1 ar->paused: 0x0  arvif->paused: 0x0
[184143.155520] ath10k_pci 0000:00:00.0: mac flush vdev 0 drop 0 queues 0x1 ar->paused: 0x0  arvif->paused: 0x0
[184565.381214] ath10k_pci 0000:00:00.0: mac flush vdev 0 drop 0 queues 0x1 ar->paused: 0x0  arvif->paused: 0x0
[186233.246387] Rekeying PTK for STA da:81:98:35:32:b1 but driver can't safely do that.
[186233.246421] ath10k_pci 0000:00:00.0: mac flush vdev 0 drop 0 queues 0x1 ar->paused: 0x0  arvif->paused: 0x0
[186236.323268] ath10k_pci 0000:00:00.0: mac flush vdev 0 drop 0 queues 0x1 ar->paused: 0x0  arvif->paused: 0x0
[188048.128394] ath10k_pci 0000:00:00.0: mac flush vdev 0 drop 0 queues 0x1 ar->paused: 0x0  arvif->paused: 0x0
[188381.155333] ath10k_pci 0000:00:00.0: mac flush vdev 0 drop 0 queues 0x1 ar->paused: 0x0  arvif->paused: 0x0
[191628.821691] Rekeying PTK for STA da:81:98:35:32:b1 but driver can't safely do that.
[191628.821724] ath10k_pci 0000:00:00.0: mac flush vdev 0 drop 0 queues 0x1 ar->paused: 0x0  arvif->paused: 0x0
[191628.873426] ath10k_pci 0000:00:00.0: mac flush vdev 0 drop 0 queues 0x1 ar->paused: 0x0  arvif->paused: 0x0
[191673.454045] Rekeying PTK for STA da:81:98:35:32:b1 but driver can't safely do that.
[191673.454079] ath10k_pci 0000:00:00.0: mac flush vdev 0 drop 0 queues 0x1 ar->paused: 0x0  arvif->paused: 0x0
[191673.504540] ath10k_pci 0000:00:00.0: mac flush vdev 0 drop 0 queues 0x1 ar->paused: 0x0  arvif->paused: 0x0
[191941.772625] Rekeying PTK for STA da:81:98:35:32:b1 but driver can't safely do that.
[191941.772658] ath10k_pci 0000:00:00.0: mac flush vdev 0 drop 0 queues 0x1 ar->paused: 0x0  arvif->paused: 0x0
[191941.838484] ath10k_pci 0000:00:00.0: mac flush vdev 0 drop 0 queues 0x1 ar->paused: 0x0  arvif->paused: 0x0
[192020.594100] Rekeying PTK for STA da:81:98:35:32:b1 but driver can't safely do that.
[192020.594133] ath10k_pci 0000:00:00.0: mac flush vdev 0 drop 0 queues 0x1 ar->paused: 0x0  arvif->paused: 0x0
[192020.665561] ath10k_pci 0000:00:00.0: mac flush vdev 0 drop 0 queues 0x1 ar->paused: 0x0  arvif->paused: 0x0
[192175.329090] ath10k_pci 0000:00:00.0: mac flush vdev 0 drop 0 queues 0x1 ar->paused: 0x0  arvif->paused: 0x0
[192318.690272] Rekeying PTK for STA da:81:98:35:32:b1 but driver can't safely do that.
[192318.690306] ath10k_pci 0000:00:00.0: mac flush vdev 0 drop 0 queues 0x1 ar->paused: 0x0  arvif->paused: 0x0
[192318.737257] ath10k_pci 0000:00:00.0: mac flush vdev 0 drop 0 queues 0x1 ar->paused: 0x0  arvif->paused: 0x0
[192372.674922] Rekeying PTK for STA da:81:98:35:32:b1 but driver can't safely do that.
[192372.674955] ath10k_pci 0000:00:00.0: mac flush vdev 0 drop 0 queues 0x1 ar->paused: 0x0  arvif->paused: 0x0
[192372.740940] ath10k_pci 0000:00:00.0: mac flush vdev 0 drop 0 queues 0x1 ar->paused: 0x0  arvif->paused: 0x0
[192751.758279] ath10k_pci 0000:00:00.0: mac flush vdev 0 drop 0 queues 0x1 ar->paused: 0x0  arvif->paused: 0x0
[192904.717830] Rekeying PTK for STA da:81:98:35:32:b1 but driver can't safely do that.
[192904.717863] ath10k_pci 0000:00:00.0: mac flush vdev 0 drop 0 queues 0x1 ar->paused: 0x0  arvif->paused: 0x0
[192904.771676] ath10k_pci 0000:00:00.0: mac flush vdev 0 drop 0 queues 0x1 ar->paused: 0x0  arvif->paused: 0x0
[193250.791694] ath10k_pci 0000:00:00.0: mac flush vdev 0 drop 0 queues 0x1 ar->paused: 0x0  arvif->paused: 0x0
[204067.204805] ath10k_pci 0000:00:00.0: mac flush vdev 0 drop 0 queues 0x1 ar->paused: 0x0  arvif->paused: 0x0
[204122.822419] ath10k_pci 0000:00:00.0: mac flush vdev 0 drop 0 queues 0x1 ar->paused: 0x0  arvif->paused: 0x0
[241969.657474] ath10k_pci 0000:00:00.0: mac flush vdev 0 drop 0 queues 0x1 ar->paused: 0x0  arvif->paused: 0x0
[242540.069349] ath10k_pci 0000:00:00.0: mac flush vdev 0 drop 0 queues 0x1 ar->paused: 0x0  arvif->paused: 0x0
[242729.840128] ath10k_pci 0000:00:00.0: mac flush vdev 0 drop 0 queues 0x1 ar->paused: 0x0  arvif->paused: 0x0
[243111.865082] ath10k_pci 0000:00:00.0: mac flush vdev 0 drop 0 queues 0x1 ar->paused: 0x0  arvif->paused: 0x0
[245263.006893] ath10k_pci 0000:00:00.0: mac flush vdev 0 drop 0 queues 0x1 ar->paused: 0x0  arvif->paused: 0x0
[248653.952029] ath10k_pci 0000:00:00.0: mac flush vdev 0 drop 0 queues 0x1 ar->paused: 0x0  arvif->paused: 0x0
[248912.036509] ath10k_pci 0000:00:00.0: mac flush vdev 0 drop 0 queues 0x1 ar->paused: 0x0  arvif->paused: 0x0
[249098.943728] ath10k_pci 0000:00:00.0: mac flush vdev 0 drop 0 queues 0x1 ar->paused: 0x0  arvif->paused: 0x0
[249228.062533] ath10k_pci 0000:00:00.0: mac flush vdev 0 drop 0 queues 0x1 ar->paused: 0x0  arvif->paused: 0x0
[249415.967146] ath10k_pci 0000:00:00.0: mac flush vdev 0 drop 0 queues 0x1 ar->paused: 0x0  arvif->paused: 0x0
[253462.619188] ath10k_pci 0000:00:00.0: mac flush vdev 0 drop 0 queues 0x1 ar->paused: 0x0  arvif->paused: 0x0
[258231.967908] ath10k_pci 0000:00:00.0: mac flush vdev 0 drop 0 queues 0x1 ar->paused: 0x0  arvif->paused: 0x0
[261920.755964] ath10k_pci 0000:00:00.0: mac flush vdev 0 drop 0 queues 0x1 ar->paused: 0x0  arvif->paused: 0x0
[262506.878429] ath10k_pci 0000:00:00.0: mac flush vdev 0 drop 0 queues 0x1 ar->paused: 0x0  arvif->paused: 0x0
[263895.349878] ath10k_pci 0000:00:00.0: mac flush vdev 0 drop 0 queues 0x1 ar->paused: 0x0  arvif->paused: 0x0
[265449.343290] ath10k_pci 0000:00:00.0: mac flush vdev 0 drop 0 queues 0x1 ar->paused: 0x0  arvif->paused: 0x0
[265666.647598] ath10k_pci 0000:00:00.0: mac flush vdev 0 drop 0 queues 0x1 ar->paused: 0x0  arvif->paused: 0x0
[266133.669406] ath10k_pci 0000:00:00.0: mac flush vdev 0 drop 0 queues 0x1 ar->paused: 0x0  arvif->paused: 0x0
[275504.518373] ath10k_pci 0000:00:00.0: mac flush vdev 0 drop 0 queues 0x1 ar->paused: 0x0  arvif->paused: 0x0
[275550.905165] ath10k_pci 0000:00:00.0: mac flush vdev 0 drop 0 queues 0x1 ar->paused: 0x0  arvif->paused: 0x0
[282540.578127] ath10k_pci 0000:00:00.0: mac flush vdev 0 drop 0 queues 0x1 ar->paused: 0x0  arvif->paused: 0x0
[286946.820014] ath10k_pci 0000:00:00.0: mac flush vdev 0 drop 0 queues 0x1 ar->paused: 0x0  arvif->paused: 0x0
[319979.183540] ath10k_pci 0000:00:00.0: mac flush vdev 0 drop 0 queues 0x1 ar->paused: 0x0  arvif->paused: 0x0
[320347.207078] ath10k_pci 0000:00:00.0: mac flush vdev 0 drop 0 queues 0x1 ar->paused: 0x0  arvif->paused: 0x0
[326185.202260] Rekeying PTK for STA da:81:98:35:32:b1 but driver can't safely do that.
[326185.202294] ath10k_pci 0000:00:00.0: mac flush vdev 0 drop 0 queues 0x1 ar->paused: 0x0  arvif->paused: 0x0
[326185.248869] ath10k_pci 0000:00:00.0: mac flush vdev 0 drop 0 queues 0x1 ar->paused: 0x0  arvif->paused: 0x0
[326609.265675] ath10k_pci 0000:00:00.0: mac flush vdev 0 drop 0 queues 0x1 ar->paused: 0x0  arvif->paused: 0x0
[328316.906255] ath10k_pci 0000:00:00.0: mac flush vdev 0 drop 0 queues 0x1 ar->paused: 0x0  arvif->paused: 0x0
[337421.681916] ath10k_pci 0000:00:00.0: mac flush vdev 0 drop 0 queues 0x1 ar->paused: 0x0  arvif->paused: 0x0
[353242.727174] ath10k_pci 0000:00:00.0: mac flush vdev 0 drop 0 queues 0x1 ar->paused: 0x0  arvif->paused: 0x0
[356056.407164] ath10k_pci 0000:00:00.0: mac flush vdev 0 drop 0 queues 0x1 ar->paused: 0x0  arvif->paused: 0x0
[359352.241099] ath10k_pci 0000:00:00.0: mac flush vdev 0 drop 0 queues 0x1 ar->paused: 0x0  arvif->paused: 0x0
[363156.496237] ath10k_pci 0000:00:00.0: mac flush vdev 0 drop 0 queues 0x1 ar->paused: 0x0  arvif->paused: 0x0
[365202.440747] ath10k_pci 0000:00:00.0: mac flush vdev 0 drop 0 queues 0x1 ar->paused: 0x0  arvif->paused: 0x0
[365638.463093] ath10k_pci 0000:00:00.0: mac flush vdev 0 drop 0 queues 0x1 ar->paused: 0x0  arvif->paused: 0x0
[366946.018198] Rekeying PTK for STA da:81:98:35:32:b1 but driver can't safely do that.
[366946.018231] ath10k_pci 0000:00:00.0: mac flush vdev 0 drop 0 queues 0x1 ar->paused: 0x0  arvif->paused: 0x0
[366946.082813] ath10k_pci 0000:00:00.0: mac flush vdev 0 drop 0 queues 0x1 ar->paused: 0x0  arvif->paused: 0x0
[366946.106129] ath10k_pci 0000:00:00.0: mac flush vdev 0 drop 0 queues 0x1 ar->paused: 0x0  arvif->paused: 0x0
[367250.973841] Rekeying PTK for STA da:81:98:35:32:b1 but driver can't safely do that.
[367250.973874] ath10k_pci 0000:00:00.0: mac flush vdev 0 drop 0 queues 0x1 ar->paused: 0x0  arvif->paused: 0x0
[367251.043166] ath10k_pci 0000:00:00.0: mac flush vdev 0 drop 0 queues 0x1 ar->paused: 0x0  arvif->paused: 0x0
[369490.041580] ath10k_pci 0000:00:00.0: mac flush vdev 0 drop 0 queues 0x1 ar->paused: 0x0  arvif->paused: 0x0
[370496.238996] Rekeying PTK for STA da:81:98:35:32:b1 but driver can't safely do that.
[370496.239029] ath10k_pci 0000:00:00.0: mac flush vdev 0 drop 0 queues 0x1 ar->paused: 0x0  arvif->paused: 0x0
[370496.304986] ath10k_pci 0000:00:00.0: mac flush vdev 0 drop 0 queues 0x1 ar->paused: 0x0  arvif->paused: 0x0
[371730.961946] ath10k_pci 0000:00:00.0: mac flush vdev 0 drop 0 queues 0x1 ar->paused: 0x0  arvif->paused: 0x0
[373033.303133] ath10k_pci 0000:00:00.0: mac flush vdev 0 drop 0 queues 0x1 ar->paused: 0x0  arvif->paused: 0x0
[374114.880258] Rekeying PTK for STA da:81:98:35:32:b1 but driver can't safely do that.
[374114.880291] ath10k_pci 0000:00:00.0: mac flush vdev 0 drop 0 queues 0x1 ar->paused: 0x0  arvif->paused: 0x0
[374114.945280] ath10k_pci 0000:00:00.0: mac flush vdev 0 drop 0 queues 0x1 ar->paused: 0x0  arvif->paused: 0x0
[401995.510885] ath10k_pci 0000:00:00.0: mac flush vdev 0 drop 0 queues 0x1 ar->paused: 0x0  arvif->paused: 0x0
[401995.521656] br-lan: port 2(phy2-ap0) entered disabled state
[401995.531234] ath10k_pci 0000:00:00.0: mac flush vdev 0 drop 0 queues 0x1 ar->paused: 0x0  arvif->paused: 0x0
[401995.544761] ath10k_pci 0000:00:00.0: mac flush null vif, drop 0 queues 0xffff
11

Change the driver?
The vdev flush is normal noise coming from ath10k driver (either type)

12

Will do - I assume that these are still the valid steps?

https://github.com/openwrt/openwrt/issues/14089#issuecomment-2016944494

13

grep first. rest looks fine.

14

Done. I'll report back in a few days with observations.

15

Well, didn't take long to reproduce similar symptoms with the non-ct firmware.

Here's the kernel log:

[    0.000000] Linux version 5.15.167 (builder@buildhost) (mips-openwrt-linux-musl-gcc (OpenWrt GCC 12.3.0 r24106-10cc5fcd00) 12.3.0, GNU ld (GNU Binutils) 2.40.0) #0 Mon Sep 23 12:34:46 2024
[    0.000000] printk: bootconsole [early0] enabled
[    0.000000] CPU0 revision is: 00019750 (MIPS 74Kc)
[    0.000000] MIPS: machine is TP-Link Archer C7 v4
[    0.000000] SoC: Qualcomm Atheros QCA956X ver 1 rev 0
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
[    0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x0000000000000000-0x0000000007ffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000000000-0x0000000007ffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000007ffffff]
[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[    0.000000] pcpu-alloc: [0] 0
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 32480
[    0.000000] Kernel command line: console=ttyS0,115200n8 rootfstype=squashfs,jffs2
[    0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes, linear)
[    0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes, linear)
[    0.000000] Writing ErrCtl register=00000000
[    0.000000] Readback ErrCtl register=00000000
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] Memory: 120816K/131072K available (6100K kernel code, 599K rwdata, 784K rodata, 1212K init, 216K bss, 10256K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] NR_IRQS: 51
[    0.000000] CPU clock: 775.000 MHz
[    0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 4932285024 ns
[    0.000001] sched_clock: 32 bits at 387MHz, resolution 2ns, wraps every 5541893118ns
[    0.008292] Calibrating delay loop... 385.84 BogoMIPS (lpj=1929216)
[    0.074815] pid_max: default: 32768 minimum: 301
[    0.080508] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.088240] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.102580] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.112996] futex hash table entries: 256 (order: -1, 3072 bytes, linear)
[    0.120361] pinctrl core: initialized pinctrl subsystem
[    0.127512] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.134326] thermal_sys: Registered thermal governor 'step_wise'
[    0.147279] clocksource: Switched to clocksource MIPS
[    0.160271] NET: Registered PF_INET protocol family
[    0.165641] IP idents hash table entries: 2048 (order: 2, 16384 bytes, linear)
[    0.174191] tcp_listen_portaddr_hash hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.183166] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.191360] TCP established hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.199452] TCP bind hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.206893] TCP: Hash tables configured (established 1024 bind 1024)
[    0.213757] UDP hash table entries: 256 (order: 0, 4096 bytes, linear)
[    0.220718] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes, linear)
[    0.228453] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.234461] PCI: CLS 0 bytes, default 32
[    0.241862] workingset: timestamp_bits=14 max_order=15 bucket_order=1
[    0.253358] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.259582] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    0.271363] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[    0.282895] pinctrl-single 1804002c.pinmux: 544 pins, size 68
[    0.289718] gpio-export gpio-export: 2 gpio(s) exported
[    0.296251] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
[    0.305437] printk: console [ttyS0] disabled
[    0.310056] 18020000.uart: ttyS0 at MMIO 0x18020000 (irq = 9, base_baud = 1562500) is a 16550A
[    0.319179] printk: console [ttyS0] enabled
[    0.328249] printk: bootconsole [early0] disabled
[    0.356125] led_gpio@0 enforce active low on GPIO handle
[    0.368426] spi-nor spi0.0: w25q128 (16384 Kbytes)
[    0.373448] 5 fixed-partitions partitions found on MTD device spi0.0
[    0.380093] OF: Bad cell count for /ahb/spi@1f000000/flash@0/partitions
[    0.386960] OF: Bad cell count for /ahb/spi@1f000000/flash@0/partitions
[    0.394138] OF: Bad cell count for /ahb/spi@1f000000/flash@0/partitions
[    0.401059] OF: Bad cell count for /ahb/spi@1f000000/flash@0/partitions
[    0.408358] Creating 5 MTD partitions on "spi0.0":
[    0.413359] 0x000000000000-0x000000020000 : "factory-uboot"
[    0.422831] 0x000000020000-0x000000040000 : "u-boot"
[    0.429008] 0x000000040000-0x000000f00000 : "firmware"
[    0.436897] 2 uimage-fw partitions found on MTD device firmware
[    0.443083] Creating 2 MTD partitions on "firmware":
[    0.448231] 0x000000000000-0x00000023ad64 : "kernel"
[    0.453356] mtd: partition "kernel" doesn't end on an erase/write block -- force read-only
[    0.463712] 0x00000023ad64-0x000000ec0000 : "rootfs"
[    0.468903] mtd: partition "rootfs" doesn't start on an erase/write block boundary -- force read-only
[    0.479374] mtd: setting mtd4 (rootfs) as root device
[    0.485469] 1 squashfs-split partitions found on MTD device rootfs
[    0.491927] 0x000000620000-0x000000ec0000 : "rootfs_data"
[    0.498597] 0x000000f00000-0x000000ff0000 : "info"
[    0.506000] 0x000000ff0000-0x000001000000 : "art"
[    1.241334] switch0: Atheros AR8337 rev. 2 switch registered on mdio.0
[    1.898915] ag71xx 19000000.eth: connected to PHY at mdio.0:00 [uid=004dd036, driver=Atheros AR8216/AR8236/AR8316]
[    1.910239] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode: sgmii
[    1.917167] i2c_dev: i2c /dev entries driver
[    1.933289] NET: Registered PF_INET6 protocol family
[    1.944567] Segment Routing with IPv6
[    1.948492] In-situ OAM (IOAM) with IPv6
[    1.952685] NET: Registered PF_PACKET protocol family
[    1.958047] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[    1.971744] 8021q: 802.1Q VLAN Support v1.8
[    1.977374] PCI host bridge to bus 0000:00
[    1.981624] pci_bus 0000:00: root bus resource [mem 0x12000000-0x13ffffff]
[    1.988753] pci_bus 0000:00: root bus resource [io  0x0000]
[    1.994514] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[    2.002753] pci 0000:00:00.0: [168c:003c] type 00 class 0x028000
[    2.009011] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit]
[    2.016069] pci 0000:00:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
[    2.023083] pci 0000:00:00.0: supports D1 D2
[    2.028545] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
[    2.035413] pci 0000:00:00.0: BAR 0: assigned [mem 0x12000000-0x121fffff 64bit]
[    2.043032] pci 0000:00:00.0: BAR 6: assigned [mem 0x12200000-0x1220ffff pref]
[    2.053739] clk: Disabling unused clocks
[    2.066751] VFS: Mounted root (squashfs filesystem) readonly on device 31:4.
[    2.080602] Freeing unused kernel image (initmem) memory: 1212K
[    2.086729] This architecture does not have kernel memory protection.
[    2.093412] Run /sbin/init as init process
[    2.097650]   with arguments:
[    2.097655]     /sbin/init
[    2.097660]   with environment:
[    2.097663]     HOME=/
[    2.097667]     TERM=linux
[    2.744837] init: Console is alive
[    2.748915] init: - watchdog -
[    4.228807] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[    4.311780] usbcore: registered new interface driver usbfs
[    4.317571] usbcore: registered new interface driver hub
[    4.323191] usbcore: registered new device driver usb
[    4.335604] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    4.345666] fsl-ehci: Freescale EHCI Host controller driver
[    4.353102] ehci-platform: EHCI generic platform driver
[    4.358972] ehci-platform 1b000000.usb: EHCI Host Controller
[    4.364888] ehci-platform 1b000000.usb: new USB bus registered, assigned bus number 1
[    4.373137] ehci-platform 1b000000.usb: irq 13, io mem 0x1b000000
[    4.407297] ehci-platform 1b000000.usb: USB 2.0 started, EHCI 1.00
[    4.414610] hub 1-0:1.0: USB hub found
[    4.419272] hub 1-0:1.0: 1 port detected
[    4.424279] ehci-platform 1b400000.usb: EHCI Host Controller
[    4.430203] ehci-platform 1b400000.usb: new USB bus registered, assigned bus number 2
[    4.438447] ehci-platform 1b400000.usb: irq 14, io mem 0x1b400000
[    4.467299] ehci-platform 1b400000.usb: USB 2.0 started, EHCI 1.00
[    4.474585] hub 2-0:1.0: USB hub found
[    4.479333] hub 2-0:1.0: 1 port detected
[    4.486801] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[    4.504804] init: - preinit -
[    6.200704] random: jshn: uninitialized urandom read (4 bytes read)
[    6.641108] random: jshn: uninitialized urandom read (4 bytes read)
[    6.908735] random: jshn: uninitialized urandom read (4 bytes read)
[    7.355964] random: jshn: uninitialized urandom read (4 bytes read)
[    8.372739] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[    8.379616] eth0: link up (1000Mbps/Full duplex)
[    8.417230] IPv6: ADDRCONF(NETDEV_CHANGE): eth0.1: link becomes ready
[    8.451095] random: procd: uninitialized urandom read (4 bytes read)
[   10.497795] Atheros AR8216/AR8236/AR8316 mdio.0:00: Port 2 is up
[   10.745498] jffs2: notice: (462) jffs2_build_xattr_subsystem: complete building xattr subsystem, 28 of xdatum (22 unchecked, 6 orphan) and 38 of xref (6 dead, 0 orphan) found.
[   10.764653] mount_root: switching to jffs2 overlay
[   10.777051] overlayfs: upper fs does not support tmpfile.
[   10.790224] urandom-seed: Seeding with /etc/urandom.seed
[   10.879030] eth0: link down
[   10.902936] procd: - early -
[   10.906231] procd: - watchdog -
[   11.671423] procd: - watchdog -
[   11.676250] procd: - ubus -
[   11.770208] random: ubusd: uninitialized urandom read (4 bytes read)
[   11.779634] random: ubusd: uninitialized urandom read (4 bytes read)
[   11.786706] random: ubusd: uninitialized urandom read (4 bytes read)
[   11.796856] procd: - init -
[   12.933044] random: jshn: uninitialized urandom read (4 bytes read)
[   12.966297] random: ubusd: uninitialized urandom read (4 bytes read)
[   13.472174] kmodloader: loading kernel modules from /etc/modules.d/*
[   14.034830] Loading modules backported from Linux version v6.1.110-0-g5f55cad62cc9d
[   14.042815] Backport generated by backports.git v6.1.110-1-0-g965f73fc
[   14.871648] PPP generic driver version 2.4.2
[   14.898217] NET: Registered PF_PPPOX protocol family
[   15.200689] urngd: v1.0.2 started.
[   16.577573] random: crng init done
[   16.581106] random: 24 urandom warning(s) missed due to ratelimiting
[   16.727965] ath10k_pci 0000:00:00.0: enabling device (0000 -> 0002)
[   16.734628] ath10k_pci 0000:00:00.0: pci irq legacy oper_irq_mode 1 irq_mode 0 reset_mode 0
[   18.130749] ath10k_pci 0000:00:00.0: qca988x hw2.0 target 0x4100016c chip_id 0x043202ff sub 0000:0000
[   18.140340] ath10k_pci 0000:00:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 0
[   18.153044] ath10k_pci 0000:00:00.0: firmware ver 10.2.4-1.0-00047 api 5 features no-p2p,raw-mode,mfp,allows-mesh-bcast crc32 35bd9258
[   18.972699] ath10k_pci 0000:00:00.0: board_file api 1 bmi_id N/A crc32 bebc7c08
[   20.211173] ath10k_pci 0000:00:00.0: htt-ver 2.1 wmi-op 5 htt-op 2 cal file max-sta 128 raw 0 hwcrypto 1
[   20.351294] ath: EEPROM regdomain: 0x0
[   20.351315] ath: EEPROM indicates default country code should be used
[   20.351320] ath: doing EEPROM country->regdmn map search
[   20.351334] ath: country maps to regdmn code: 0x3a
[   20.351340] ath: Country alpha2 being used: US
[   20.351347] ath: Regpair used: 0x3a
[   20.492579] ath: EEPROM regdomain: 0x0
[   20.492601] ath: EEPROM indicates default country code should be used
[   20.492607] ath: doing EEPROM country->regdmn map search
[   20.492620] ath: country maps to regdmn code: 0x3a
[   20.492628] ath: Country alpha2 being used: US
[   20.492634] ath: Regpair used: 0x3a
[   20.504176] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
[   20.506176] ieee80211 phy1: Atheros AR9561 Rev:0 mem=0x71d547e9, irq=2
[   20.527818] kmodloader: done loading kernel modules from /etc/modules.d/*
[   39.919020] eth0: link up (1000Mbps/Full duplex)
[   39.938498] br-lan: port 1(eth0.1) entered blocking state
[   39.944101] br-lan: port 1(eth0.1) entered disabled state
[   39.950000] device eth0.1 entered promiscuous mode
[   39.954968] device eth0 entered promiscuous mode
[   39.992327] br-lan: port 1(eth0.1) entered blocking state
[   39.997964] br-lan: port 1(eth0.1) entered forwarding state
[   40.090985] guest-bridge: port 1(eth0.22) entered blocking state
[   40.097209] guest-bridge: port 1(eth0.22) entered disabled state
[   40.103748] device eth0.22 entered promiscuous mode
[   40.171264] guest-bridge: port 1(eth0.22) entered blocking state
[   40.177536] guest-bridge: port 1(eth0.22) entered forwarding state
[   40.304227] iot-bridge: port 1(eth0.33) entered blocking state
[   40.310336] iot-bridge: port 1(eth0.33) entered disabled state
[   40.367365] device eth0.33 entered promiscuous mode
[   40.394247] iot-bridge: port 1(eth0.33) entered blocking state
[   40.400345] iot-bridge: port 1(eth0.33) entered forwarding state
[   40.546611] partyiot-bridge: port 1(eth0.44) entered blocking state
[   40.553174] partyiot-bridge: port 1(eth0.44) entered disabled state
[   40.559935] device eth0.44 entered promiscuous mode
[   40.668189] partyiot-bridge: port 1(eth0.44) entered blocking state
[   40.674692] partyiot-bridge: port 1(eth0.44) entered forwarding state
[   43.908563] ath10k_pci 0000:00:00.0: pci irq legacy oper_irq_mode 1 irq_mode 0 reset_mode 0
[   47.670248] ath10k_pci 0000:00:00.0: qca988x hw2.0 target 0x4100016c chip_id 0x043202ff sub 0000:0000
[   47.679845] ath10k_pci 0000:00:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 0
[   47.692558] ath10k_pci 0000:00:00.0: firmware ver 10.2.4-1.0-00047 api 5 features no-p2p,raw-mode,mfp,allows-mesh-bcast crc32 35bd9258
[   49.875730] ath10k_pci 0000:00:00.0: board_file api 1 bmi_id N/A crc32 bebc7c08
[   50.774733] br-lan: port 2(phy1-ap0) entered blocking state
[   50.780571] br-lan: port 2(phy1-ap0) entered disabled state
[   50.786608] device phy1-ap0 entered promiscuous mode
[   50.967517] IPv6: ADDRCONF(NETDEV_CHANGE): phy1-ap0: link becomes ready
[   50.974680] br-lan: port 2(phy1-ap0) entered blocking state
[   50.980509] br-lan: port 2(phy1-ap0) entered forwarding state
[   51.337762] partyiot-bridge: port 2(phy1-ap1) entered blocking state
[   51.344457] partyiot-bridge: port 2(phy1-ap1) entered disabled state
[   51.351438] device phy1-ap1 entered promiscuous mode
[   51.399743] partyiot-bridge: port 2(phy1-ap1) entered blocking state
[   51.406333] partyiot-bridge: port 2(phy1-ap1) entered forwarding state
[   51.705863] IPv6: ADDRCONF(NETDEV_CHANGE): phy1-ap1: link becomes ready
[   51.751428] iot-bridge: port 2(phy1-ap2) entered blocking state
[   51.757766] iot-bridge: port 2(phy1-ap2) entered disabled state
[   51.764191] device phy1-ap2 entered promiscuous mode
[   51.803697] iot-bridge: port 2(phy1-ap2) entered blocking state
[   51.809883] iot-bridge: port 2(phy1-ap2) entered forwarding state
[   51.816433] iot-bridge: port 2(phy1-ap2) entered disabled state
[   51.893157] ath10k_pci 0000:00:00.0: htt-ver 2.1 wmi-op 5 htt-op 2 cal file max-sta 128 raw 0 hwcrypto 1
[   52.081007] ath: EEPROM regdomain: 0x0
[   52.084900] ath: EEPROM indicates default country code should be used
[   52.091592] ath: doing EEPROM country->regdmn map search
[   52.097096] ath: country maps to regdmn code: 0x3a
[   52.102071] ath: Country alpha2 being used: US
[   52.106764] ath: Regpair used: 0x3a
[   52.187173] IPv6: ADDRCONF(NETDEV_CHANGE): phy1-ap2: link becomes ready
[   52.194263] iot-bridge: port 2(phy1-ap2) entered blocking state
[   52.200426] iot-bridge: port 2(phy1-ap2) entered forwarding state
[   52.253029] guest-bridge: port 2(phy1-ap3) entered blocking state
[   52.259453] guest-bridge: port 2(phy1-ap3) entered disabled state
[   52.277258] device phy1-ap3 entered promiscuous mode
[   52.287917] guest-bridge: port 2(phy1-ap3) entered blocking state
[   52.294251] guest-bridge: port 2(phy1-ap3) entered forwarding state
[   52.530879] IPv6: ADDRCONF(NETDEV_CHANGE): phy1-ap3: link becomes ready
[   57.622371] guest-bridge: port 2(phy1-ap3) entered disabled state
[   57.631527] device phy1-ap3 left promiscuous mode
[   57.636527] guest-bridge: port 2(phy1-ap3) entered disabled state
[   57.729253] iot-bridge: port 2(phy1-ap2) entered disabled state
[   57.749736] device phy1-ap2 left promiscuous mode
[   57.754620] iot-bridge: port 2(phy1-ap2) entered disabled state
[   57.879944] partyiot-bridge: port 2(phy1-ap1) entered disabled state
[   57.919768] device phy1-ap1 left promiscuous mode
[   57.924654] partyiot-bridge: port 2(phy1-ap1) entered disabled state
[   58.131303] br-lan: port 2(phy1-ap0) entered disabled state
[   58.137576] device phy1-ap0 left promiscuous mode
[   58.142544] br-lan: port 2(phy1-ap0) entered disabled state
[   65.769359] ath10k_pci 0000:00:00.0: pdev param 0 not supported by firmware
[   65.793608] br-lan: port 2(phy2-ap0) entered blocking state
[   65.799436] br-lan: port 2(phy2-ap0) entered disabled state
[   65.805464] device phy2-ap0 entered promiscuous mode
[   66.341679] br-lan: port 3(phy1-ap0) entered blocking state
[   66.347510] br-lan: port 3(phy1-ap0) entered disabled state
[   66.353670] device phy1-ap0 entered promiscuous mode
[   66.358964] br-lan: port 3(phy1-ap0) entered blocking state
[   66.364738] br-lan: port 3(phy1-ap0) entered forwarding state
[   66.505276] IPv6: ADDRCONF(NETDEV_CHANGE): phy1-ap0: link becomes ready
[   66.538849] partyiot-bridge: port 2(phy1-ap1) entered blocking state
[   66.545540] partyiot-bridge: port 2(phy1-ap1) entered disabled state
[   66.552448] device phy1-ap1 entered promiscuous mode
[   66.573157] partyiot-bridge: port 2(phy1-ap1) entered blocking state
[   66.579800] partyiot-bridge: port 2(phy1-ap1) entered forwarding state
[   66.792329] IPv6: ADDRCONF(NETDEV_CHANGE): phy1-ap1: link becomes ready
[   66.839184] iot-bridge: port 2(phy1-ap2) entered blocking state
[   66.845376] iot-bridge: port 2(phy1-ap2) entered disabled state
[   66.870628] device phy1-ap2 entered promiscuous mode
[   66.887653] iot-bridge: port 2(phy1-ap2) entered blocking state
[   66.893791] iot-bridge: port 2(phy1-ap2) entered forwarding state
[   67.197244] IPv6: ADDRCONF(NETDEV_CHANGE): phy1-ap2: link becomes ready
[   67.243256] guest-bridge: port 2(phy1-ap3) entered blocking state
[   67.249759] guest-bridge: port 2(phy1-ap3) entered disabled state
[   67.295855] device phy1-ap3 entered promiscuous mode
[   67.302154] guest-bridge: port 2(phy1-ap3) entered blocking state
[   67.308510] guest-bridge: port 2(phy1-ap3) entered forwarding state
[   67.607315] IPv6: ADDRCONF(NETDEV_CHANGE): phy1-ap3: link becomes ready
[  131.122858] IPv6: ADDRCONF(NETDEV_CHANGE): phy2-ap0: link becomes ready
[  131.130024] br-lan: port 2(phy2-ap0) entered blocking state
[  131.135814] br-lan: port 2(phy2-ap0) entered forwarding state
[ 5436.037060] ath10k_pci 0000:00:00.0: failed to flush transmit queue (skip 0 ar-state 1): 0
[11602.841557] ath10k_pci 0000:00:00.0: failed to flush transmit queue (skip 0 ar-state 1): 0
[17988.513513] ath10k_pci 0000:00:00.0: failed to flush transmit queue (skip 0 ar-state 1): 0
[18547.305838] ath10k_pci 0000:00:00.0: failed to flush transmit queue (skip 0 ar-state 1): 0
[83140.656149] ath10k_pci 0000:00:00.0: Spurious quick kickout for STA fa:4e:f2:88:f0:0d
[83142.753407] ath10k_pci 0000:00:00.0: Spurious quick kickout for STA fa:4e:f2:88:f0:0d
[96525.383270] ath10k_pci 0000:00:00.0: failed to flush transmit queue (skip 0 ar-state 1): 0
[105100.155679] ath10k_pci 0000:00:00.0: failed to flush transmit queue (skip 0 ar-state 1): 0
[108750.747100] Rekeying PTK for STA 0a:6b:f3:2c:94:ce but driver can't safely do that.
[115395.466768] ath10k_pci 0000:00:00.0: failed to flush transmit queue (skip 0 ar-state 1): 0
[149013.933348] ath10k_pci 0000:00:00.0: failed to flush transmit queue (skip 0 ar-state 1): 0
[184756.365310] ath10k_pci 0000:00:00.0: failed to flush transmit queue (skip 0 ar-state 1): 0
[189587.101851] ath10k_pci 0000:00:00.0: failed to flush transmit queue (skip 0 ar-state 1): 0
[193019.698649] ath10k_pci 0000:00:00.0: failed to flush transmit queue (skip 0 ar-state 1): 0
[193216.458285] br-lan: port 2(phy2-ap0) entered disabled state
[193216.601286] br-lan: port 2(phy2-ap0) entered disabled state
[193216.608683] device phy2-ap0 left promiscuous mode
[193216.613772] br-lan: port 2(phy2-ap0) entered disabled state
[193217.832470] ath10k_pci 0000:00:00.0: pdev param 0 not supported by firmware
[193217.856039] br-lan: port 2(phy2-ap0) entered blocking state
[193217.862026] br-lan: port 2(phy2-ap0) entered disabled state
[193217.868188] device phy2-ap0 entered promiscuous mode
16

And here's the overall log from a few minutes before the 5 GHz AP "disappeared" forward:

Thu Oct 24 20:41:04 2024 daemon.notice hostapd: phy2-ap0: AP-STA-DISCONNECTED cc:6b:1e:8b:98:45
Thu Oct 24 20:41:04 2024 daemon.debug hostapd: phy2-ap0: STA cc:6b:1e:8b:98:45 WPA: event 3 notification
Thu Oct 24 20:41:04 2024 daemon.debug hostapd: phy2-ap0: STA cc:6b:1e:8b:98:45 IEEE 802.1X: unauthorizing port
Thu Oct 24 20:41:04 2024 daemon.debug hostapd: phy2-ap0: STA cc:6b:1e:8b:98:45 IEEE 802.11: deauthenticated
Thu Oct 24 20:41:04 2024 daemon.debug hostapd: phy2-ap0: STA cc:6b:1e:8b:98:45 MLME: MLME-DEAUTHENTICATE.indication(cc:6b:1e:8b:98:45, 3)
Thu Oct 24 20:41:04 2024 daemon.debug hostapd: phy2-ap0: STA cc:6b:1e:8b:98:45 MLME: MLME-DELETEKEYS.request(cc:6b:1e:8b:98:45)
Thu Oct 24 20:41:09 2024 kern.warn kernel: [193019.698649] ath10k_pci 0000:00:00.0: failed to flush transmit queue (skip 0 ar-state 1): 0
Thu Oct 24 20:41:09 2024 daemon.debug hostapd: phy1-ap0: STA cc:6b:1e:8b:98:45 IEEE 802.11: authentication OK (open system)
Thu Oct 24 20:41:09 2024 daemon.debug hostapd: phy1-ap0: STA cc:6b:1e:8b:98:45 MLME: MLME-AUTHENTICATE.indication(cc:6b:1e:8b:98:45, OPEN_SYSTEM)
Thu Oct 24 20:41:09 2024 daemon.debug hostapd: phy1-ap0: STA cc:6b:1e:8b:98:45 MLME: MLME-DELETEKEYS.request(cc:6b:1e:8b:98:45)
Thu Oct 24 20:41:09 2024 daemon.notice hostapd: phy1-ap0: STA cc:6b:1e:8b:98:45 IEEE 802.11: did not acknowledge authentication response
Thu Oct 24 20:41:09 2024 daemon.debug hostapd: phy1-ap0: STA cc:6b:1e:8b:98:45 IEEE 802.11: authentication OK (open system)
Thu Oct 24 20:41:09 2024 daemon.debug hostapd: phy1-ap0: STA cc:6b:1e:8b:98:45 MLME: MLME-AUTHENTICATE.indication(cc:6b:1e:8b:98:45, OPEN_SYSTEM)
Thu Oct 24 20:41:09 2024 daemon.debug hostapd: phy1-ap0: STA cc:6b:1e:8b:98:45 MLME: MLME-DELETEKEYS.request(cc:6b:1e:8b:98:45)
Thu Oct 24 20:41:09 2024 daemon.debug hostapd: phy1-ap0: STA cc:6b:1e:8b:98:45 IEEE 802.11: authentication OK (open system)
Thu Oct 24 20:41:09 2024 daemon.debug hostapd: phy1-ap0: STA cc:6b:1e:8b:98:45 MLME: MLME-AUTHENTICATE.indication(cc:6b:1e:8b:98:45, OPEN_SYSTEM)
Thu Oct 24 20:41:09 2024 daemon.debug hostapd: phy1-ap0: STA cc:6b:1e:8b:98:45 MLME: MLME-DELETEKEYS.request(cc:6b:1e:8b:98:45)
Thu Oct 24 20:41:09 2024 daemon.notice hostapd: phy1-ap0: STA cc:6b:1e:8b:98:45 IEEE 802.11: did not acknowledge authentication response
Thu Oct 24 20:41:09 2024 daemon.notice hostapd: phy1-ap0: STA cc:6b:1e:8b:98:45 IEEE 802.11: did not acknowledge authentication response
Thu Oct 24 20:41:26 2024 daemon.debug hostapd: phy2-ap0: STA cc:6b:1e:8b:98:45 IEEE 802.11: authentication OK (open system)
Thu Oct 24 20:41:26 2024 daemon.debug hostapd: phy2-ap0: STA cc:6b:1e:8b:98:45 MLME: MLME-AUTHENTICATE.indication(cc:6b:1e:8b:98:45, OPEN_SYSTEM)
Thu Oct 24 20:41:26 2024 daemon.debug hostapd: phy2-ap0: STA cc:6b:1e:8b:98:45 MLME: MLME-DELETEKEYS.request(cc:6b:1e:8b:98:45)
Thu Oct 24 20:41:26 2024 daemon.debug hostapd: phy2-ap0: STA cc:6b:1e:8b:98:45 IEEE 802.11: authentication OK (open system)
Thu Oct 24 20:41:26 2024 daemon.debug hostapd: phy2-ap0: STA cc:6b:1e:8b:98:45 MLME: MLME-AUTHENTICATE.indication(cc:6b:1e:8b:98:45, OPEN_SYSTEM)
Thu Oct 24 20:41:26 2024 daemon.debug hostapd: phy2-ap0: STA cc:6b:1e:8b:98:45 MLME: MLME-DELETEKEYS.request(cc:6b:1e:8b:98:45)
Thu Oct 24 20:41:26 2024 daemon.info hostapd: phy2-ap0: STA cc:6b:1e:8b:98:45 IEEE 802.11: authenticated
Thu Oct 24 20:41:26 2024 daemon.info hostapd: phy2-ap0: STA cc:6b:1e:8b:98:45 IEEE 802.11: authenticated
Thu Oct 24 20:41:26 2024 daemon.debug hostapd: phy2-ap0: STA cc:6b:1e:8b:98:45 IEEE 802.11: association OK (aid 4)
Thu Oct 24 20:41:26 2024 daemon.info hostapd: phy2-ap0: STA cc:6b:1e:8b:98:45 IEEE 802.11: associated (aid 4)
Thu Oct 24 20:41:26 2024 daemon.debug hostapd: phy2-ap0: STA cc:6b:1e:8b:98:45 MLME: MLME-ASSOCIATE.indication(cc:6b:1e:8b:98:45)
Thu Oct 24 20:41:26 2024 daemon.debug hostapd: phy2-ap0: STA cc:6b:1e:8b:98:45 MLME: MLME-DELETEKEYS.request(cc:6b:1e:8b:98:45)
Thu Oct 24 20:41:26 2024 daemon.debug hostapd: phy2-ap0: STA cc:6b:1e:8b:98:45 IEEE 802.11: binding station to interface 'phy2-ap0'
Thu Oct 24 20:41:26 2024 daemon.debug hostapd: phy2-ap0: STA cc:6b:1e:8b:98:45 WPA: event 1 notification
Thu Oct 24 20:41:26 2024 daemon.notice hostapd: phy1-ap0: Prune association for cc:6b:1e:8b:98:45
Thu Oct 24 20:41:26 2024 daemon.debug hostapd: phy2-ap0: STA cc:6b:1e:8b:98:45 WPA: start authentication
Thu Oct 24 20:41:26 2024 daemon.debug hostapd: phy2-ap0: STA cc:6b:1e:8b:98:45 IEEE 802.1X: unauthorizing port
Thu Oct 24 20:41:26 2024 daemon.debug hostapd: phy2-ap0: STA cc:6b:1e:8b:98:45 WPA: sending 1/4 msg of 4-Way Handshake
Thu Oct 24 20:41:26 2024 daemon.debug hostapd: phy2-ap0: STA cc:6b:1e:8b:98:45 WPA: received EAPOL-Key frame (2/4 Pairwise)
Thu Oct 24 20:41:26 2024 daemon.debug hostapd: phy2-ap0: STA cc:6b:1e:8b:98:45 WPA: sending 3/4 msg of 4-Way Handshake
Thu Oct 24 20:41:26 2024 daemon.debug hostapd: phy2-ap0: STA cc:6b:1e:8b:98:45 WPA: received EAPOL-Key frame (4/4 Pairwise)
Thu Oct 24 20:41:26 2024 daemon.notice hostapd: phy2-ap0: AP-STA-CONNECTED cc:6b:1e:8b:98:45 auth_alg=open
Thu Oct 24 20:41:26 2024 daemon.debug hostapd: phy2-ap0: STA cc:6b:1e:8b:98:45 IEEE 802.1X: authorizing port
Thu Oct 24 20:41:26 2024 daemon.info hostapd: phy2-ap0: STA cc:6b:1e:8b:98:45 WPA: pairwise key handshake completed (RSN)
Thu Oct 24 20:41:26 2024 daemon.notice hostapd: phy2-ap0: EAPOL-4WAY-HS-COMPLETED cc:6b:1e:8b:98:45
Thu Oct 24 20:41:28 2024 daemon.debug hostapd: phy1-ap0: STA cc:6b:1e:8b:98:45 MLME: MLME-DISASSOCIATE.indication(cc:6b:1e:8b:98:45, 1)
Thu Oct 24 20:41:28 2024 daemon.debug hostapd: phy1-ap0: STA cc:6b:1e:8b:98:45 MLME: MLME-DELETEKEYS.request(cc:6b:1e:8b:98:45)
Thu Oct 24 20:41:56 2024 daemon.info hostapd: phy1-ap0: STA cc:6b:1e:8b:98:45 IEEE 802.11: deauthenticated due to inactivity (timer DEAUTH/REMOVE)
Thu Oct 24 20:41:56 2024 daemon.debug hostapd: phy1-ap0: STA cc:6b:1e:8b:98:45 MLME: MLME-DEAUTHENTICATE.indication(cc:6b:1e:8b:98:45, 2)
Thu Oct 24 20:41:56 2024 daemon.debug hostapd: phy1-ap0: STA cc:6b:1e:8b:98:45 MLME: MLME-DELETEKEYS.request(cc:6b:1e:8b:98:45)
Thu Oct 24 20:44:26 2024 daemon.notice hostapd: phy2-ap0: DFS-RADAR-DETECTED freq=5500 ht_enabled=0 chan_offset=0 chan_width=3 cf1=5530 cf2=0
Thu Oct 24 20:44:26 2024 daemon.notice hostapd: dfs_downgrade_bandwidth: no DFS channels left, waiting for NOP to finish
Thu Oct 24 20:44:26 2024 daemon.notice hostapd: phy2-ap0: AP-DISABLED
Thu Oct 24 20:44:26 2024 daemon.debug hostapd: phy2-ap0: STA cc:6b:1e:8b:98:45 MLME: MLME-DEAUTHENTICATE.indication(cc:6b:1e:8b:98:45, 1)
Thu Oct 24 20:44:26 2024 daemon.notice hostapd: phy2-ap0: AP-STA-DISCONNECTED cc:6b:1e:8b:98:45
Thu Oct 24 20:44:26 2024 daemon.debug hostapd: phy2-ap0: STA ce:05:61:a8:ec:15 MLME: MLME-DEAUTHENTICATE.indication(ce:05:61:a8:ec:15, 1)
Thu Oct 24 20:44:26 2024 daemon.notice hostapd: phy2-ap0: AP-STA-DISCONNECTED ce:05:61:a8:ec:15
Thu Oct 24 20:44:26 2024 daemon.debug hostapd: phy2-ap0: STA 96:c1:9f:08:0d:2c MLME: MLME-DEAUTHENTICATE.indication(96:c1:9f:08:0d:2c, 1)
Thu Oct 24 20:44:26 2024 daemon.notice hostapd: phy2-ap0: AP-STA-DISCONNECTED 96:c1:9f:08:0d:2c
Thu Oct 24 20:44:26 2024 daemon.err hostapd: 20/40 MHz: center segment 0 (=106) and center freq 1 (=5510) not in sync
Thu Oct 24 20:44:26 2024 daemon.debug hostapd: phy2-ap0: STA 3a:e6:d2:3f:69:a1 MLME: MLME-DEAUTHENTICATE.indication(3a:e6:d2:3f:69:a1, 1)
Thu Oct 24 20:44:26 2024 daemon.notice hostapd: phy2-ap0: AP-STA-DISCONNECTED 3a:e6:d2:3f:69:a1
Thu Oct 24 20:44:26 2024 daemon.notice hostapd: nl80211: deinit ifname=phy2-ap0 disabled_11b_rates=0
Thu Oct 24 20:44:26 2024 daemon.notice netifd: Network device 'phy2-ap0' link is down
Thu Oct 24 20:44:26 2024 kern.info kernel: [193216.458285] br-lan: port 2(phy2-ap0) entered disabled state
Thu Oct 24 20:44:26 2024 kern.info kernel: [193216.601286] br-lan: port 2(phy2-ap0) entered disabled state
Thu Oct 24 20:44:26 2024 kern.info kernel: [193216.608683] device phy2-ap0 left promiscuous mode
Thu Oct 24 20:44:26 2024 kern.info kernel: [193216.613772] br-lan: port 2(phy2-ap0) entered disabled state
Thu Oct 24 20:44:26 2024 daemon.notice hostapd: phy2-ap0: interface state ENABLED->DISABLED
Thu Oct 24 20:44:27 2024 kern.warn kernel: [193217.832470] ath10k_pci 0000:00:00.0: pdev param 0 not supported by firmware
Thu Oct 24 20:44:28 2024 kern.info kernel: [193217.856039] br-lan: port 2(phy2-ap0) entered blocking state
Thu Oct 24 20:44:28 2024 kern.info kernel: [193217.862026] br-lan: port 2(phy2-ap0) entered disabled state
Thu Oct 24 20:44:28 2024 kern.info kernel: [193217.868188] device phy2-ap0 entered promiscuous mode
Thu Oct 24 20:44:28 2024 daemon.notice hostapd: phy2-ap0: interface state DISABLED->COUNTRY_UPDATE
Thu Oct 24 20:44:28 2024 daemon.notice hostapd: phy2-ap0: interface state COUNTRY_UPDATE->HT_SCAN
Thu Oct 24 20:44:28 2024 daemon.err hostapd: could not get valid channel
Thu Oct 24 20:44:28 2024 daemon.notice hostapd: phy2-ap0: interface state HT_SCAN->DFS
Thu Oct 24 21:05:13 2024 daemon.notice netifd: PARTY_IOT (2121): udhcpc: sending renew to server 10.44.0.1
Thu Oct 24 21:05:13 2024 daemon.notice netifd: PARTY_IOT (2121): udhcpc: lease of 10.44.0.147 obtained from 10.44.0.1, lease time 43200
Thu Oct 24 21:05:16 2024 daemon.notice netifd: IOT (2187): udhcpc: sending renew to server 192.168.33.1
Thu Oct 24 21:05:16 2024 daemon.notice netifd: IOT (2187): udhcpc: lease of 192.168.33.147 obtained from 192.168.33.1, lease time 43200
Thu Oct 24 21:05:16 2024 daemon.notice netifd: GUEST (2216): udhcpc: sending renew to server 10.22.0.1
Thu Oct 24 21:05:16 2024 daemon.notice netifd: GUEST (2216): udhcpc: lease of 10.22.0.146 obtained from 10.22.0.1, lease time 43200
Thu Oct 24 21:14:31 2024 daemon.notice hostapd: phy2-ap0: DFS-NOP-FINISHED freq=5500 ht_enabled=0 chan_offset=0 chan_width=0 cf1=5500 cf2=0
Thu Oct 24 21:14:31 2024 daemon.err hostapd: could not get valid channel
Thu Oct 24 21:14:31 2024 daemon.notice hostapd: phy2-ap0: interface state DFS->DFS
Thu Oct 24 21:14:31 2024 daemon.notice hostapd: phy2-ap0: DFS-NOP-FINISHED freq=5520 ht_enabled=0 chan_offset=0 chan_width=0 cf1=5520 cf2=0
Thu Oct 24 21:14:31 2024 daemon.notice hostapd: phy2-ap0: interface state DFS->DFS
Thu Oct 24 21:14:31 2024 daemon.notice hostapd: phy2-ap0: DFS-CAC-START freq=5500 chan=100 sec_chan=1, width=0, seg0=106, seg1=0, cac_time=60s
Thu Oct 24 21:14:31 2024 daemon.err hostapd: 20/40 MHz: center segment 0 (=106) and center freq 1 (=5510) not in sync
Thu Oct 24 21:14:31 2024 daemon.err hostapd: Can't set freq params
Thu Oct 24 21:14:31 2024 daemon.err hostapd: DFS start_dfs_cac() failed, -1
Thu Oct 24 21:14:31 2024 daemon.notice hostapd: phy2-ap0: DFS-NOP-FINISHED freq=5540 ht_enabled=0 chan_offset=0 chan_width=0 cf1=5540 cf2=0
Thu Oct 24 21:14:31 2024 daemon.notice hostapd: phy2-ap0: interface state DFS->DFS
Thu Oct 24 21:14:31 2024 daemon.notice hostapd: phy2-ap0: DFS-CAC-START freq=5500 chan=100 sec_chan=1, width=0, seg0=106, seg1=0, cac_time=60s
Thu Oct 24 21:14:31 2024 daemon.err hostapd: 20/40 MHz: center segment 0 (=106) and center freq 1 (=5510) not in sync
Thu Oct 24 21:14:31 2024 daemon.err hostapd: Can't set freq params
Thu Oct 24 21:14:31 2024 daemon.err hostapd: DFS start_dfs_cac() failed, -1
Thu Oct 24 21:14:31 2024 daemon.notice hostapd: phy2-ap0: DFS-NOP-FINISHED freq=5560 ht_enabled=0 chan_offset=0 chan_width=0 cf1=5560 cf2=0
Thu Oct 24 21:14:31 2024 daemon.notice hostapd: phy2-ap0: interface state DFS->DFS
Thu Oct 24 21:14:31 2024 daemon.notice hostapd: phy2-ap0: DFS-CAC-START freq=5500 chan=100 sec_chan=1, width=0, seg0=106, seg1=0, cac_time=60s
Thu Oct 24 21:14:31 2024 daemon.err hostapd: 20/40 MHz: center segment 0 (=106) and center freq 1 (=5510) not in sync
Thu Oct 24 21:14:31 2024 daemon.err hostapd: Can't set freq params
Thu Oct 24 21:14:31 2024 daemon.err hostapd: DFS start_dfs_cac() failed, -1
Thu Oct 24 21:14:45 2024 authpriv.info dropbear[6610]: Child connection from 192.168.1.153:25012
Thu Oct 24 21:14:46 2024 authpriv.notice dropbear[6610]: Pubkey auth succeeded for 'root' with ssh-rsa key SHA256:wLodJwipeP2sx1VmzgOLSFggJ0cqqfwoIGV3HO44zvs from 192.168.1.153:25012
1 Like
17

DFS event at startup.

1 Like
18

Since this is in the dfs range, try using a non-dfs channel. For example, ch36. This will ensure that the system does not use dfs channels and thus will not be subject to shutting down upon radar hits.

1 Like
19

You need to manually edit the /etc/config/network

Then near 5GHz radio:

# add fallback   
    option channels '36 100' 
    option channel '100'
# or permit AUTO-BW half-channel    
    # option channels '100'
    # option channel 'auto'
# or just jump around all DFS channels
    # option channels '52 100 116 132 149 165'
    # option channel 'auto'
20

Thanks all for the insight. I did some more background reading here https://openwrt.org/docs/guide-user/network/wifi/basic#dfsradar_detection and then chose a channel that does not require DFS.