Hi everyone! I has install the OpenWrt in Tp-Link C6 v3 AC1200 following this page https://openwrt.org/toh/hwdata/tp-link/tp-link_archer_c6_v3 using the firmware upgrade webpage (GUI). the router has accepted and installed the firmware but after reload apparently they not boot. The real problem is…

TFTP will not work in this situation. UBOOT detects a valid kernel and is trying to load it. Since the kernel is valid it will not activate the web recovery. Therefore a UART connection is required to manually activate the web recovery via serial console. I successfully unbricked an Archer C6 v3.x…

Tp-Link Archer c6 v3 not booting after install and LAN ports not working for TFTP recovery

Installing and Using OpenWrt

anon89577378 January 31, 2022, 10:40pm 2

Known issue...

1 Like