This topic was intended for adding support for this specific device.
Since official 19.07.0 images are available now, I will set a timer for this topic to close.
Why?
Because specific problems for this device with official releases are better handled in separate topics, in order to make finding relevant information easier. Who is going to read the previous 1000-something postings, if he has a specific problem with 19.07.0 and wifi?
Therefore: Please open new topics for any open issues with this device.
I couldnt find solution with official openwrt , i replace firmware with ilyas's one. wifi was good, but ı had package problem i tried to return to openwrt, now it is bricked again i need to debrick again.
I use the 19.07 snapshoot from yesterday. (r12140-c2859bf126)
Yes it is ready but it's not stable.
Many cut of wifi or no internet access.
Need to reconnect (no restart of router!) and it's ready for a time.
I succeed to do the UART procedure, and, I see the 2 Openwrt wifi networks from the router.
But when I shutdown and move the router to connect it to ISP box, then it is as if nothing was done.
It is again in the initial state (before UART procedure).
It seems that the new firmware is not "written" in the router...
Could you please help me on that point ?
Thanks
EDIT: I tried a sysupgrade and I had this message:
root@OpenWrt:~# sysupgrade -v /tmp/sysupgrade.bin
Cannot save config while running from ramdisk.
Commencing upgrade. Closing all shell sessions.
Connection to 192.168.1.1 closed by remote host.
Connection to 192.168.1.1 closed.
So, I've been running snapshop 4.14.141 and upgraded to 19.07.1 just a couple of hours ago. So far, everything works like a charm. I see massive improvement in wireless speed and stability. Config is preserved, but stupidly enough I didn't export my previously installed packages, so installing now everything manually.
Compiling and flashing OpenWRT was a completely new experience for me and it was a lot of fun! So, see you all guys when I brick my next router!
