Hi,
I'm trying to get MikroTik R11e-LTE modem working on MikroTik RouterBoard wAP LTE kit. I've now installed OpenWRT 22.03.2. By following a previous discussion thread I got RNDIS seemingly working, but the modem does not seem to connect to ISP. Any ideas what could be wrong or what needs to be done next? Here below is more debugging information, thanks!
BusyBox v1.35.0 (2022-10-14 22:44:41 UTC) built-in shell (ash)
_______ ________ __
| |.-----.-----.-----.| | | |.----.| |_
| - || _ | -__| || | | || _|| _|
|_______|| __|_____|__|__||________||__| |____|
|__| W I R E L E S S F R E E D O M
-----------------------------------------------------
OpenWrt 22.03.2, r19803-9a599fee93
-----------------------------------------------------
root@OpenWRT:~# opkg list
ath9k-htc-firmware - 20220411-1
base-files - 1494-r19803-9a599fee93
busybox - 1.35.0-4
ca-bundle - 20211016-1
cgi-io - 2022-08-10-901b0f04-21
dbus - 1.13.18-12
dnsmasq - 2.86-14
dropbear - 2022.82-2
firewall4 - 2022-10-14-4fbf6d75-1
fstools - 2022-06-02-93369be0-2
fwtool - 2019-11-12-8f7fe925-1
getrandom - 2021-08-03-205defb5-2
glib2 - 2.70.5-4
hostapd-common - 2022-01-16-cff80b4f-13.1
iw - 5.16-1
iwinfo - 2022-08-19-0dad3e66-1
jansson4 - 2.13.1-2
jshn - 2022-05-15-d2223ef9-1
jsonfilter - 2018-02-04-c7e938d6-1
kernel - 5.10.146-1-389e5bbbf017215f52b37592aca22239
kmod-ath - 5.10.146+5.15.58-1-1
kmod-ath9k - 5.10.146+5.15.58-1-1
kmod-ath9k-common - 5.10.146+5.15.58-1-1
kmod-ath9k-htc - 5.10.146+5.15.58-1-1
kmod-cfg80211 - 5.10.146+5.15.58-1-1
kmod-crypto-aead - 5.10.146-1
kmod-crypto-ccm - 5.10.146-1
kmod-crypto-cmac - 5.10.146-1
kmod-crypto-crc32c - 5.10.146-1
kmod-crypto-ctr - 5.10.146-1
kmod-crypto-gcm - 5.10.146-1
kmod-crypto-gf128 - 5.10.146-1
kmod-crypto-ghash - 5.10.146-1
kmod-crypto-hash - 5.10.146-1
kmod-crypto-hmac - 5.10.146-1
kmod-crypto-manager - 5.10.146-1
kmod-crypto-null - 5.10.146-1
kmod-crypto-rng - 5.10.146-1
kmod-crypto-seqiv - 5.10.146-1
kmod-crypto-sha256 - 5.10.146-1
kmod-gpio-button-hotplug - 5.10.146-3
kmod-lib-crc-ccitt - 5.10.146-1
kmod-lib-crc32c - 5.10.146-1
kmod-mac80211 - 5.10.146+5.15.58-1-1
kmod-mii - 5.10.146-1
kmod-nf-conntrack - 5.10.146-1
kmod-nf-conntrack6 - 5.10.146-1
kmod-nf-flow - 5.10.146-1
kmod-nf-log - 5.10.146-1
kmod-nf-log6 - 5.10.146-1
kmod-nf-nat - 5.10.146-1
kmod-nf-reject - 5.10.146-1
kmod-nf-reject6 - 5.10.146-1
kmod-nfnetlink - 5.10.146-1
kmod-nft-core - 5.10.146-1
kmod-nft-fib - 5.10.146-1
kmod-nft-nat - 5.10.146-1
kmod-nft-offload - 5.10.146-1
kmod-nls-base - 5.10.146-1
kmod-phy-ath79-usb - 5.10.146-1
kmod-ppp - 5.10.146-1
kmod-pppoe - 5.10.146-1
kmod-pppox - 5.10.146-1
kmod-scsi-core - 5.10.146-1
kmod-slhc - 5.10.146-1
kmod-usb-acm - 5.10.146-1
kmod-usb-core - 5.10.146-1
kmod-usb-ehci - 5.10.146-1
kmod-usb-net - 5.10.146-1
kmod-usb-net-cdc-ether - 5.10.146-1
kmod-usb-net-cdc-mbim - 5.10.146-1
kmod-usb-net-cdc-ncm - 5.10.146-1
kmod-usb-net-rndis - 5.10.146-1
kmod-usb-serial - 5.10.146-1
kmod-usb-serial-wwan - 5.10.146-1
kmod-usb-storage - 5.10.146-1
kmod-usb-wdm - 5.10.146-1
kmod-usb2 - 5.10.146-1
kmod-usb2-pci - 5.10.146-1
libattr - 2.5.1-1
libblobmsg-json20220515 - 2022-05-15-d2223ef9-1
libc - 1.2.3-4
libdbus - 1.13.18-12
libevdev - 1.13.0-1
libexpat - 2.4.9-1
libffi - 3.4.2-2
libgcc1 - 11.2.0-4
libiwinfo-data - 2022-08-19-0dad3e66-1
libiwinfo-lua - 2022-08-19-0dad3e66-1
libiwinfo20210430 - 2022-08-19-0dad3e66-1
libjson-c5 - 0.15-2
libjson-script20220515 - 2022-05-15-d2223ef9-1
libkmod - 27-2
liblua5.1.5 - 5.1.5-10
liblucihttp-lua - 2022-07-08-6e68a106-1
liblucihttp0 - 2022-07-08-6e68a106-1
libmbim - 1.26.4-1
libmnl0 - 1.0.5-1
libnftnl11 - 1.2.1-1
libnl-tiny1 - 2021-11-21-8e0555fb-1
libpci - 3.8.0-2
libpcre - 8.45-3
libpthread - 1.2.3-4
libqmi - 1.30.8-1
libqrtr-glib - 1.2.2-1
librt - 1.2.3-4
libubox20220515 - 2022-05-15-d2223ef9-1
libubus-lua - 2022-06-01-2bebf93c-1
libubus20220601 - 2022-06-01-2bebf93c-1
libuci20130104 - 2021-10-22-f84f49f0-6
libuclient20201210 - 2021-05-14-6a6011df-1
libucode20220812 - 2022-10-07-4ae70721-1
libudev-zero - 1.0.1-1
libusb-1.0-0 - 1.0.24-5
libustream-wolfssl20201210 - 2022-01-16-868fd881-2
libwolfssl5.5.1.ee39414e - 5.5.1-stable-3
logd - 2021-08-03-205defb5-2
lua - 5.1.5-10
luci - git-20.074.84698-ead5e81
luci-app-firewall - git-22.089.67563-7e3c1b4
luci-app-opkg - git-22.273.29004-9f6876b
luci-base - git-22.288.45147-96ec0cd
luci-lib-base - git-20.232.39649-1f6dc29
luci-lib-ip - git-20.250.76529-62505bd
luci-lib-jsonc - git-22.097.61921-7513345
luci-lib-nixio - git-20.234.06894-c4a4e43
luci-mod-admin-full - git-19.253.48496-3f93650
luci-mod-network - git-22.244.54818-b13d8c7
luci-mod-status - git-22.189.48501-6731190
luci-mod-system - git-22.264.46172-b6b7da4
luci-proto-ipv6 - git-21.148.48881-79947af
luci-proto-modemmanager - git-21.231.25157-5ff3ef7
luci-proto-ppp - git-21.158.38888-88b9d84
luci-ssl - git-20.244.36115-e10f954
luci-theme-bootstrap - git-22.288.45147-96ec0cd
modemmanager - 1.18.6-2
mtd - 26
netifd - 2022-08-25-76d2d41b-1
nftables-json - 1.0.2-2.1
odhcp6c - 2022-08-05-7d21e8d8-18
odhcpd-ipv6only - 2022-03-22-860ca900-1
openwrt-keyring - 2022-03-25-62471e69-3
opkg - 2022-02-24-d038e5b6-1
pciids - 0.359-1
pciutils - 3.8.0-2
ppp - 2.4.9.git-2021-01-04-3
ppp-mod-pppoe - 2.4.9.git-2021-01-04-3
procd - 2022-06-01-7a009685-1
procd-seccomp - 2022-06-01-7a009685-1
procd-ujail - 2022-06-01-7a009685-1
px5g-wolfssl - 5.1
rpcd - 2022-09-21-8c852b65-1
rpcd-mod-file - 2022-09-21-8c852b65-1
rpcd-mod-iwinfo - 2022-09-21-8c852b65-1
rpcd-mod-luci - 20210614
rpcd-mod-rrdns - 20170710
rssileds - 3
swconfig - 12
ubi-utils - 2.1.4-1
uboot-envtools - 2022.01-32
ubox - 2021-08-03-205defb5-2
ubus - 2022-06-01-2bebf93c-1
ubusd - 2022-06-01-2bebf93c-1
uci - 2021-10-22-f84f49f0-6
uclient-fetch - 2021-05-14-6a6011df-1
ucode - 2022-10-07-4ae70721-1
ucode-mod-fs - 2022-10-07-4ae70721-1
ucode-mod-ubus - 2022-10-07-4ae70721-1
ucode-mod-uci - 2022-10-07-4ae70721-1
uhttpd - 2022-08-12-e3395cd9-1
uhttpd-mod-ubus - 2022-08-12-e3395cd9-1
urandom-seed - 3
urngd - 2020-01-21-c7f7b6b6-1
usbutils - 014-1
usign - 2020-05-23-f1f65026-1
wireless-regdb - 2022.08.12-1
wpad-basic-wolfssl - 2022-01-16-cff80b4f-13.1
zlib - 1.2.11-6
root@OpenWRT:~# ifconfig
br-lan Link encap:Ethernet HWaddr 08:55:31:XX:XX:XX
inet addr:10.XXX.XXX.1 Bcast:10.XXX.XXX.255 Mask:255.255.255.0
inet6 addr: fe80::a55:31ff:XXXX:XXXX/64 Scope:Link
inet6 addr: fd17:4e11:XXXX::1/60 Scope:Global
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:157 errors:0 dropped:0 overruns:0 frame:0
TX packets:102 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:18094 (17.6 KiB) TX bytes:17903 (17.4 KiB)
eth0 Link encap:Ethernet HWaddr 08:55:31:55:XX:XX
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:159 errors:0 dropped:0 overruns:0 frame:0
TX packets:107 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:20732 (20.2 KiB) TX bytes:18329 (17.8 KiB)
Interrupt:4
eth1 Link encap:Ethernet HWaddr AC:FF:FF:00:00:00
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:1 errors:0 dropped:0 overruns:0 frame:0
TX packets:32 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:28 (28.0 B) TX bytes:12352 (12.0 KiB)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:65536 Metric:1
RX packets:40 errors:0 dropped:0 overruns:0 frame:0
TX packets:40 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:4186 (4.0 KiB) TX bytes:4186 (4.0 KiB)
wlan0 Link encap:Ethernet HWaddr 08:55:31:XX:XX:XX
inet addr:192.168.XXX.XXX Bcast:192.168.XXX.255 Mask:255.255.255.0
inet6 addr: fe80::a55:31ff:XXXX:XXXX/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:35 errors:0 dropped:0 overruns:0 frame:0
TX packets:43 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:4075 (3.9 KiB) TX bytes:5316 (5.1 KiB)
root@OpenWRT:~# lsusb
Bus 001 Device 002: ID 2cd2:0001 MikroTik R11e-LTE
Bus 001 Device 001: ID 1d6b:0002 Linux 5.10.146 ehci_hcd EHCI Host Controller
root@OpenWRT:~# cat /sys/kernel/debug/usb/devices
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 1
B: Alloc= 0/800 us ( 0%), #Int= 1, #Iso= 0
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=1d6b ProdID=0002 Rev= 5.10
S: Manufacturer=Linux 5.10.146 ehci_hcd
S: Product=EHCI Host Controller
S: SerialNumber=1b000000.usb
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 4 Ivl=256ms
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=2cd2 ProdID=0001 Rev= 1.00
S: Manufacturer=MikroTik
S: Product=R11e-LTE
S: SerialNumber=000000000000
C:* #Ifs= 7 Cfg#= 1 Atr=c0 MxPwr=500mA
A: FirstIf#= 0 IfCount= 2 Cls=e0(wlcon) Sub=01 Prot=03
A: FirstIf#= 2 IfCount= 2 Cls=02(comm.) Sub=02 Prot=01
A: FirstIf#= 4 IfCount= 2 Cls=02(comm.) Sub=02 Prot=01
I:* If#= 0 Alt= 0 #EPs= 1 Cls=e0(wlcon) Sub=01 Prot=03 Driver=rndis_host
E: Ad=8c(I) Atr=03(Int.) MxPS= 16 Ivl=4096ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host
E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=0d(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=02 Prot=01 Driver=cdc_acm
E: Ad=84(I) Atr=03(Int.) MxPS= 16 Ivl=4096ms
I:* If#= 3 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_acm
E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=02 Prot=01 Driver=cdc_acm
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=4096ms
I:* If#= 5 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_acm
E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 6 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
E: Ad=8b(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=0a(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
root@OpenWRT:~# dmesg
[ 0.000000] Linux version 5.10.146 (builder@buildhost) (mips-openwrt-linux-musl-gcc (OpenWrt GCC 11.2.0 r19803-9a599fee93) 11.2.0, GNU ld (GNU Binutils) 2.37) #0 Fri Oct 14 22:44:41 2022
[ 0.000000] printk: bootconsole [early0] enabled
[ 0.000000] CPU0 revision is: 00019374 (MIPS 24Kc)
[ 0.000000] MIPS: machine is MikroTik RouterBOARD wAPR-2nD (wAP R)
[ 0.000000] SoC: Qualcomm Atheros QCA9533 ver 2 rev 0
[ 0.000000] Initrd not found or empty - disabling initrd
[ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
[ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
[ 0.000000] Zone ranges:
[ 0.000000] Normal [mem 0x0000000000000000-0x0000000003ffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x0000000003ffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000003ffffff]
[ 0.000000] On node 0 totalpages: 16384
[ 0.000000] Normal zone: 144 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 16384 pages, LIFO batch:3
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 16240
[ 0.000000] Kernel command line: console=ttyS0,115200n8 rootfstype=squashfs,jffs2
[ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes, linear)
[ 0.000000] Writing ErrCtl register=00000000
[ 0.000000] Readback ErrCtl register=00000000
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] Memory: 55536K/65536K available (6437K kernel code, 595K rwdata, 804K rodata, 1244K init, 214K bss, 10000K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] NR_IRQS: 51
[ 0.000000] CPU clock: 650.000 MHz
[ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 5880801374 ns
[ 0.000009] sched_clock: 32 bits at 325MHz, resolution 3ns, wraps every 6607641598ns
[ 0.008944] Calibrating delay loop... 432.53 BogoMIPS (lpj=2162688)
[ 0.076061] pid_max: default: 32768 minimum: 301
[ 0.081473] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[ 0.089771] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[ 0.100881] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build
[ 0.112380] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.123598] futex hash table entries: 256 (order: -1, 3072 bytes, linear)
[ 0.131433] pinctrl core: initialized pinctrl subsystem
[ 0.142039] NET: Registered protocol family 16
[ 0.147862] thermal_sys: Registered thermal governor 'step_wise'
[ 0.205599] clocksource: Switched to clocksource MIPS
[ 0.219500] NET: Registered protocol family 2
[ 0.224710] IP idents hash table entries: 2048 (order: 2, 16384 bytes, linear)
[ 0.233824] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear)
[ 0.243442] TCP established hash table entries: 1024 (order: 0, 4096 bytes, linear)
[ 0.252171] TCP bind hash table entries: 1024 (order: 0, 4096 bytes, linear)
[ 0.260192] TCP: Hash tables configured (established 1024 bind 1024)
[ 0.267564] UDP hash table entries: 256 (order: 0, 4096 bytes, linear)
[ 0.275003] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes, linear)
[ 0.283290] NET: Registered protocol family 1
[ 0.288313] PCI: CLS 0 bytes, default 32
[ 0.299684] workingset: timestamp_bits=14 max_order=14 bucket_order=0
[ 0.311820] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.318488] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.331594] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.343561] pinctrl-single 1804002c.pinmux: 576 pins, size 72
[ 0.350708] gpio-export gpio-export: 1 gpio(s) exported
[ 0.357634] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
[ 0.367376] printk: console [ttyS0] disabled
[ 0.372309] 18020000.uart: ttyS0 at MMIO 0x18020000 (irq = 9, base_baud = 1562500) is a 16550A
[ 0.382164] printk: console [ttyS0] enabled
[ 0.391228] printk: bootconsole [early0] disabled
[ 0.422664] spi-nor spi0.0: w25q128jv (16384 Kbytes)
[ 0.427925] 2 fixed-partitions partitions found on MTD device spi0.0
[ 0.434533] OF: Bad cell count for /ahb/spi@1f000000/flash@0/partitions
[ 0.441414] OF: Bad cell count for /ahb/spi@1f000000/flash@0/partitions
[ 0.448661] OF: Bad cell count for /ahb/spi@1f000000/flash@0/partitions
[ 0.455522] OF: Bad cell count for /ahb/spi@1f000000/flash@0/partitions
[ 0.462633] Creating 2 MTD partitions on "spi0.0":
[ 0.467633] 0x000000000000-0x000000020000 : "RouterBoot"
[ 0.479742] 5 routerbootpart partitions found on MTD device RouterBoot
[ 0.486568] Creating 5 MTD partitions on "RouterBoot":
[ 0.491879] 0x000000000000-0x00000000e000 : "bootloader1"
[ 0.499548] 0x00000000e000-0x00000000f000 : "hard_config"
[ 0.506292] 0x00000000f000-0x000000010000 : "bios"
[ 0.513984] 0x000000010000-0x00000001f000 : "bootloader2"
[ 0.520798] 0x00000001f000-0x000000020000 : "soft_config"
[ 0.529183] 0x000000020000-0x000001000000 : "firmware"
[ 0.536301] 2 minor-fw partitions found on MTD device firmware
[ 0.542347] Creating 2 MTD partitions on "firmware":
[ 0.547517] 0x000000000000-0x000000290000 : "kernel"
[ 0.555357] 0x000000290000-0x000000fe0000 : "rootfs"
[ 0.561553] mtd: device 8 (rootfs) set to be root filesystem
[ 0.568500] 1 squashfs-split partitions found on MTD device rootfs
[ 0.574905] 0x000000630000-0x000000fe0000 : "rootfs_data"
[ 0.938394] switch0: Atheros AR8229 rev. 1 switch registered on mdio.0
[ 0.996974] ag71xx 19000000.eth: invalid MAC address, using random address
[ 1.337702] ag71xx 19000000.eth: connected to PHY at mdio.0:1f:00 [uid=004dd042, driver=Generic PHY]
[ 1.347865] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode: mii
[ 1.354470] ath79-wdt 18060008.wdt: timeout value must be 0 < timeout < 14, using 14
[ 1.371341] MikroTik RouterBOARD hardware configuration sysfs driver v0.07
[ 1.380342] MikroTik RouterBOARD software configuration sysfs driver v0.05
[ 1.388494] NET: Registered protocol family 10
[ 1.395271] Segment Routing with IPv6
[ 1.399249] NET: Registered protocol family 17
[ 1.403927] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[ 1.417657] 8021q: 802.1Q VLAN Support v1.8
[ 1.427165] PCI host bridge /ahb/pcie-controller@180c0000 ranges:
[ 1.433507] MEM 0x0000000010000000..0x0000000013ffffff
[ 1.438960] IO 0x0000000000000000..0x0000000000000000
[ 1.444359] ar724x-pci 180c0000.pcie-controller: PCIe link is down
[ 1.450943] PCI host bridge to bus 0000:00
[ 1.455189] pci_bus 0000:00: root bus resource [mem 0x10000000-0x13ffffff]
[ 1.462320] pci_bus 0000:00: root bus resource [io 0x0000]
[ 1.468086] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
[ 1.475098] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[ 1.484117] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
[ 1.502187] VFS: Mounted root (squashfs filesystem) readonly on device 31:8.
[ 1.516448] Freeing unused kernel memory: 1244K
[ 1.521131] This architecture does not have kernel memory protection.
[ 1.527818] Run /sbin/init as init process
[ 1.532041] with arguments:
[ 1.532046] /sbin/init
[ 1.532050] with environment:
[ 1.532055] HOME=/
[ 1.532059] TERM=linux
[ 2.181175] init: Console is alive
[ 2.185235] init: - watchdog -
[ 3.291969] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[ 3.416456] usbcore: registered new interface driver usbfs
[ 3.422194] usbcore: registered new interface driver hub
[ 3.427826] usbcore: registered new device driver usb
[ 3.441672] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.451532] ehci-fsl: Freescale EHCI Host controller driver
[ 3.459806] ehci-platform: EHCI generic platform driver
[ 3.465697] ehci-platform 1b000000.usb: EHCI Host Controller
[ 3.471591] ehci-platform 1b000000.usb: new USB bus registered, assigned bus number 1
[ 3.479826] ehci-platform 1b000000.usb: irq 3, io mem 0x1b000000
[ 3.515622] ehci-platform 1b000000.usb: USB 2.0 started, EHCI 1.00
[ 3.523007] hub 1-0:1.0: USB hub found
[ 3.527832] hub 1-0:1.0: 1 port detected
[ 3.538114] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[ 3.556177] init: - preinit -
[ 3.864753] usb 1-1: new high-speed USB device number 2 using ehci-platform
[ 4.385921] random: procd: uninitialized urandom read (4 bytes read)
[ 5.216848] random: jshn: uninitialized urandom read (4 bytes read)
[ 5.311345] random: jshn: uninitialized urandom read (4 bytes read)
[ 5.405411] random: jshn: uninitialized urandom read (4 bytes read)
[ 5.471864] random: jshn: uninitialized urandom read (4 bytes read)
[ 5.594894] random: jshn: uninitialized urandom read (4 bytes read)
[ 7.788550] eth0: link up (100Mbps/Full duplex)
[ 7.793283] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 10.034761] jffs2: notice: (453) jffs2_build_xattr_subsystem: complete building xattr subsystem, 43 of xdatum (35 unchecked, 8 orphan) and 65 of xref (8 dead, 0 orphan) found.
[ 10.056156] mount_root: switching to jffs2 overlay
[ 10.103960] overlayfs: upper fs does not support tmpfile.
[ 10.123794] urandom-seed: Seeding with /etc/urandom.seed
[ 10.386248] eth0: link down
[ 10.411018] procd: - early -
[ 10.414414] procd: - watchdog -
[ 11.279021] procd: - watchdog -
[ 11.282742] procd: - ubus -
[ 11.763242] random: ubusd: uninitialized urandom read (4 bytes read)
[ 11.800919] random: ubusd: uninitialized urandom read (4 bytes read)
[ 11.840839] random: ubusd: uninitialized urandom read (4 bytes read)
[ 11.868602] procd: - init -
[ 13.532019] random: jshn: uninitialized urandom read (4 bytes read)
[ 16.383312] kmodloader: loading kernel modules from /etc/modules.d/*
[ 16.938464] urngd: v1.0.2 started.
[ 17.624912] random: crng init done
[ 17.628515] random: 25 urandom warning(s) missed due to ratelimiting
[ 17.664396] SCSI subsystem initialized
[ 17.728927] ehci-pci: EHCI PCI platform driver
[ 17.790363] cdc_acm 1-1:1.2: ttyACM0: USB ACM device
[ 17.802663] cdc_acm 1-1:1.4: ttyACM1: USB ACM device
[ 17.817251] usbcore: registered new interface driver cdc_acm
[ 17.823109] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 17.859163] usbcore: registered new interface driver cdc_wdm
[ 17.883453] Loading modules backported from Linux version v5.15.58-0-g7d8048d4e064
[ 17.891352] Backport generated by backports.git v5.15.58-1-0-g42a95ce7
[ 18.049814] usb-storage 1-1:1.6: USB Mass Storage device detected
[ 18.067044] scsi host0: usb-storage 1-1:1.6
[ 18.072015] usbcore: registered new interface driver usb-storage
[ 18.132124] usbcore: registered new interface driver usbserial_generic
[ 18.139039] usbserial: USB Serial support registered for generic
[ 18.167409] usbcore: registered new interface driver cdc_ether
[ 18.192300] usbcore: registered new interface driver cdc_ncm
[ 18.490751] PPP generic driver version 2.4.2
[ 18.507610] NET: Registered protocol family 24
[ 18.678369] rndis_host 1-1:1.0 eth1: register 'rndis_host' at usb-1b000000.usb-1, RNDIS device, ac:ff:ff:00:00:00
[ 18.689297] usbcore: registered new interface driver rndis_host
[ 18.775769] usbcore: registered new interface driver cdc_mbim
[ 18.976093] usbcore: registered new interface driver ath9k_htc
[ 19.016557] ath9k 18100000.wmac: Direct firmware load for ath9k-eeprom-ahb-18100000.wmac.bin failed with error -2
[ 19.027236] ath9k 18100000.wmac: Falling back to sysfs fallback for: ath9k-eeprom-ahb-18100000.wmac.bin
[ 19.146804] scsi 0:0:0:0: CD-ROM MARVELL Mobile CMCC CD 1.25 PQ: 0 ANSI: 0
[ 20.566781] ath: EEPROM regdomain: 0x0
[ 20.566798] ath: EEPROM indicates default country code should be used
[ 20.566803] ath: doing EEPROM country->regdmn map search
[ 20.566818] ath: country maps to regdmn code: 0x3a
[ 20.566825] ath: Country alpha2 being used: US
[ 20.566830] ath: Regpair used: 0x3a
[ 20.579004] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 20.581257] ieee80211 phy0: Atheros AR9531 Rev:2 mem=0xb8100000, irq=13
[ 20.636199] kmodloader: done loading kernel modules from /etc/modules.d/*
[ 46.632895] br-lan: port 1(eth0) entered blocking state
[ 46.638371] br-lan: port 1(eth0) entered disabled state
[ 46.644105] device eth0 entered promiscuous mode
[ 48.748576] eth0: link up (100Mbps/Full duplex)
[ 48.753324] br-lan: port 1(eth0) entered blocking state
[ 48.758778] br-lan: port 1(eth0) entered forwarding state
[ 48.900882] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
[ 55.785946] wlan0: authenticate with 00:24:01:XX:XX:XX
[ 55.804760] wlan0: send auth to 00:24:01:XX:XX:XX (try 1/3)
[ 55.813454] wlan0: authenticated
[ 55.985689] wlan0: associate with 00:24:01:XX:XX:XX (try 1/3)
[ 56.015686] wlan0: RX AssocResp from 00:24:01:XX:XX:XX (capab=0x431 status=0 aid=2)
[ 56.023892] wlan0: associated
[ 57.362241] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready