WiFi on my Android TV Box is power off. My satellite receiver is have leds and they are blink, but on my a 'new style' hAP ac^2 the leds is not blink.
here is another build with luci-sqm
Thanks a lot of maaax
Do you have 1Gbit LAN connection on ac2+openwrt?
My ac^2 seems to show only 100Mbit connection on LAN after installing this firmware
hello molotok i have just vdsl2 70/20 dl and up what is your connexion ?
Sorry. All OK. It was RJ45 connector problem on 2 cables :-\
1Gbit link works OK.
A new build of the OpenWrt SNAPSHOT r15880+1-8d8125a43b / LuCI Master git-21.051.50677-2b9fca8
Download https://files.sberdisk.ru/s/Xr3xPkTBxTba7at
hello everybody i need enabled ipv6 with kmod on my console but hap ac2 is not supported yet
when he has supported ?
Using this build i'm unable to establish a PPPoE connection, getting the following:
Sun Feb 21 15:51:05 2021 daemon.warn pppd[4894]: Timeout waiting for PADO packets
Sun Feb 21 15:51:05 2021 daemon.err pppd[4894]: Unable to complete PPPoE Discovery
Sun Feb 21 15:51:05 2021 daemon.info pppd[4894]: Exit.
Sun Feb 21 15:51:05 2021 daemon.notice netifd: Interface 'wan' is now down
Sun Feb 21 15:51:05 2021 daemon.notice netifd: Interface 'wan' is setting up now
Sun Feb 21 15:51:05 2021 daemon.err insmod: module is already loaded - slhc
Sun Feb 21 15:51:05 2021 daemon.err insmod: module is already loaded - ppp_generic
Sun Feb 21 15:51:05 2021 daemon.err insmod: module is already loaded - pppox
Sun Feb 21 15:51:05 2021 daemon.err insmod: module is already loaded - pppoe
Sun Feb 21 15:51:05 2021 daemon.info pppd[4976]: Plugin rp-pppoe.so loaded.
Sun Feb 21 15:51:05 2021 daemon.info pppd[4976]: RP-PPPoE plugin version 3.8p compiled against pppd 2.4.8
Sun Feb 21 15:51:05 2021 daemon.notice pppd[4976]: pppd 2.4.8 started by root, uid 0
Testing the same credentials with a PPPoE connection on my mac works.
Any ideas?
After further testing i'm getting the PPPoE issues on multiple firmware versions...
Could it be my model is "rbd52g-5hacd2hnd-tc"?
Can you try rolling back the latest OpenWrt PPP bump maybe?
How would i do this?
Revert the git commit 030bc39c350d301d3cbca4725e845a752c359c5f and compile an image yourself.
hello everybody i have make which test for hap ac2
SQM + SFO + HWO http://www.dslreports.com/speedtest/67711976
SQM + SFO http://www.dslreports.com/speedtest/67712001
SQM http://www.dslreports.com/speedtest/67712028
SFO http://www.dslreports.com/speedtest
SFO + HWO http://www.dslreports.com/speedtest/67712079
unfortunatly i do not fiber for the moment before 3 month..
is anyone may test with fiber 1gigabit DL up for me please
thanks so much
Thank you for this build maaax working good. Is there any change you would include wireguard in next build? Thx
Here is a new build (with same sources as before), including wireguard and some other vpn stuff and 3g
It's a bit bigger, but we can't use opkg anyway atm.
thank you once again, this image is working good (I did sysupgrade from previous one)
For me too! I hope there is an official image soon