Did anyone had a look on this device? Got mine new, it's pretty cheap and got nice specs. It has a OpenWRT running, so it should be possible to get a vanilla OpenWrt on it. What do you think? 1.3 GHz Dual-Core Cortex-A53 CPU Super-Fast AX3000 WiFi 6 Speeds 4× Gigabit Ports 4× High-Gain Antennas an…

It has just been added in main snapshot. mediatek: filogic: add support for Cudy WR3000S v1 committed 07:24PM - 23 Nov 24 UTC (UTC) [igieon] igieon +301 …

Hello! I got this router recently, put 24.10.0 on it without any problems, and it's been functioning great. As I read through the posts on this forum, I noticed a mention of the "bridger" package, and that it should be installed. However, some time passed since that post. Should one still do that? …

Hi bridger is only required for LAN -> Wi-Fi with wed enabled config /etc/modules.conf options mt7915e wed_enable=y IMHO If you're using WR3000 (or other mt7681b) in AP mode or Router on slow < 100Mbit internet WED and bridger are not required . WED and bridger will help if you absolutely must p…

I can't select channel 36 on latest firmware. Fine with all previous. Well I can select it but it always comes up as channel 40 after. Can anyone else confirm it's not just me? Cheers.

Hello, I'm a little confused. I was looking forward to the WR3000. Unfortunately, I can't install OpenWRT. I've tried the GUI and TFTP methods. Both aren't working for some reason. The updates from Cudy work directly. See screenshot. Please help me. Best regards [Screenshot 2025-04-25 193723] […

Installed https://www.cudy.com/blogs/faq/openwrt-software-download 1st ?

Anyone who can read has a clear advantage :slight_smile: And you should also unpack the zip in the zip completely and then use the correct bin :slight_smile: Thanks for pointing me in the right direction

hello to all i am owner of wr3000 since last days..... i am read topics here but because i am amateur about openwrt i dont understand them.... is any guide with steps to install openwrt and setup it with vpn only connection??? i will have my router from my host for internet and i will use wr3000 onl…

[image] jimani21: is any guide with steps to install openwrt [OpenWrt Wiki] Cudy WR3000 v1 Your VPN provider should have a guide on how to install it on openwrt.

i cant find anything but i will search again thanks a lot...

Is there an issue with Attended Sysupgrade for this Cudy device? It is still saying that the device runs the latest firmware version "23.05". Is there something wrong with attnd sysupgrade or is that the correct version?

OpenWrt Forum

Support for Cudy WR3000

For Developers

show post in topic

Home
Categories
Guidelines
Terms of Service
Privacy Policy

Powered by Discourse, best viewed with JavaScript enabled