Support for Cudy WR3000

[frollic]

Installed https://www.cudy.com/blogs/faq/openwrt-software-download 1st ?

[nordseepixel]

Anyone who can read has a clear advantage And you should also unpack the zip in the zip completely and then use the correct bin Thanks for pointing me in the right direction

[jimani21]

hello to all i am owner of wr3000 since last days..... i am read topics here but because i am amateur about openwrt i dont understand them.... is any guide with steps to install openwrt and setup it with vpn only connection??? i will have my router from my host for internet and i will use wr3000 only with vpn with wirequard.... thanks a lot in advance

[frollic]

@jimani21

is any guide with steps to install openwrt

[OpenWrt Wiki] Cudy WR3000 v1

Your VPN provider should have a guide on how to install it on openwrt.

[jimani21]

i cant find anything but i will search again thanks a lot...

[Lilith]

Is there an issue with Attended Sysupgrade for this Cudy device? It is still saying that the device runs the latest firmware version "23.05". Is there something wrong with attnd sysupgrade or is that the correct version?

[Wallbanger]

According to https://firmware-selector.openwrt.org/?version=24.10.1&target=mediatek%2Ffilogic&id=cudy_wr3000-v1 it should run 24.10.1

[chr1s4us]

You have to use the drop down box and select the new major version if you do like to upgrade.

[Lilith]

Ah yes, It was weird, the Attend Sysupgrade literally worked the next day, to be able to upgrade. It was not working for a while I believe, maybe something was wrong with OpenWRT servers for a bit.

[Nihilokrat]

Hi, did anyone using this device have issues with preserving files over sysupgrades, especially with (self-build) images that are 9-10 MB in size? Ever since the Kernel switch from 5.X to 6.X I can't sysupgrade without the device deleting all changes/files that were applied/created after the first OpenWrt flash.

[adl]

How on Cudy WR3000 v1 enable 802.11r/k/v?
I use Openwrt 23.05.01 and

iw list | grep -A10 "Supported interface modes"

    Supported interface modes:
             * IBSS
             * managed
             * AP
             * AP/VLAN
             * monitor
             * mesh point
             * P2P-client
             * P2P-GO
    Band 2:
            Capabilities: 0x9ff

--
Supported interface modes:
* IBSS
* managed
* AP
* AP/VLAN
* monitor
* mesh point
* P2P-client
* P2P-GO
Band 1:
Capabilities: 0x9ff

iw phy0 info | grep -i ft

            HE Iftypes: managed
            EHT Iftypes: managed
            HE Iftypes: AP
            EHT Iftypes: AP
            HE Iftypes: mesh point
            EHT Iftypes: mesh point

[Underworld]

Hi,
You can have a look here :https://openwrt.org/docs/guide-user/network/wifi/roaming
PS: most important thing for k/v is to install the full wpad version like: wpad-mbedtls, however first you need to uninstall the default basic version.
Kr
K

[braian87b]

how well this device works? how fast and reliable?, able to be put in a enclosed box on the wall? I saw that the antennas flatten to the back, are also able to be spin so are thin also to be put in a small place?